| Age | Commit message (Collapse) | Author |
|---|
|
By convention, if I run a tool with --help or --version I expect it to
exit successfully with the usage, while if I do call it wrong (like
without any parameters) I expect the usage message shown with a non-zero
exit.
|
|
Adding a new parameter (with a default) is an ABI break, but you can
overload a method, which is "just" an API break for everyone doing
references to this method (aka: nobody).
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
For compatibility we use/provide and fill quiet some deprecated methods
and fields, which subsequently earns us a warning for using them. These
warnings therefore have to be disabled for these codeparts and that is
what this change does now in a slightly more elegant way.
Git-Dch: Ignore
|
|
The manpage of va_start and co additionally says:
On some systems, va_end contains a closing '}' matching a '{' in
va_start, so that both macros must occur in the same function, and in a
way that allows this.
So instead of return/breaking instantly, we save the return, make a
proper turndown with va_end in all cases and only end after that.
Reported-By: cppcheck
Git-Dch: Ignore
|
|
|
|
Central methods of our infrastructure like this one responsible for
communication with our methods shouldn't be more complicated then they
have to and not claim to have (albeit unlikely) bugs.
While I am not sure about having improved the first part, the bug is now
gone and a few explicit tests check that it stays that way, so nobody
will notice the difference (hopefully) – expect that this should a very
tiny bit faster as well as we don't manually proceed through the string.
Git-Dch: Ignore
|
|
It is a very simple hashstring, which is why it isn't contributing to
the usability of a list of them, but it is also trivial to check and
calculate, so it doesn't hurt checking it either as it can combined even
with the simplest other hashes greatly complicate attacks on them as you
suddenly need a same-size hash collision, which is usually a lot harder
to achieve.
|
|
Private temporary directories as created by e.g. libpam-tmpdir are nice,
but they are also very effective in preventing our priviledge dropping
to work as TMPDIR will be set to a directory only root has access to, so
working with it as _apt will fail. We circumvent this by extending our
check for a usable TMPDIR setting by checking access rights.
Closes: 765951
|
|
Similar to 8f45798d532223adc378a4ad9ecfc64b3be26e4f, there is no harm to
set this, even if we don't drop privileges.
Git-Dch: Ignore
|
|
Do not drop privileges in the methods when using a older version of
libapt that does not support the chown magic in partial/ yet. To
do this DropPrivileges() now will ignore a empty Apt::Sandbox::User.
Cleanup all hardcoded _apt along the way.
|
|
|
|
Changing user and co works only as root, but can do some things for
methods run as normal user as well to protect them from being able to
call setuid binaries like sudo to elevate their privileges.
Also uses a cheap trick now to build with old unsupporting kernels.
|
|
Git-Dch: Ignore
|
|
feature/acq-trans
Conflicts:
apt-pkg/acquire-item.cc
|
|
Ignore a EINVAL error here as it means that the kernel is too old
to understand this option. We should not fail hard in this case
but just ignore the error.
closes: 764066
|
|
Git-Dch: ignore
|
|
|
|
The fileformat of a pdiff index stores currently only SHA1 hashes. With
this change, we look for all other hashes we support as well and take
what we get, so that we can work after the release of jessie to get
right of SHA1 if we want to.
Note that the completely patched file is and was checked against the
hashes collected from the Release file, so this transition isn't mission
critical.
|
|
We are the only possible users of private methods, so we are also the
only users who can potentially export them via using them in inline
methods. The point is: We don't need these symbols exported if we don't
do this, so marking them as hidden removes some methods from the API
without breaking anything as nobody could have used them.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
|
|
This used to work before we implemented a stricter commandline parser
and e.g. the dd-schroot-cmd command constructs commandlines like this.
Reported-By: Helmut Grohne
|
|
unnecessary.
Git-Dch: Ignore
Reported-By: cppcheck
|
|
gnupg/gnupg2 can do verify just fine of course, so we don't need to use
gpgv here, but it is what we always used in the past, so there might be
scripts expecting a certain output and more importantly the output of
apt-cdrom contains messages from gpg and even with all the settings we
activate to prevent it, it still shows (in some versions) a quiet scary:
"gpg: WARNING: Using untrusted key!" message. Keeping the use of gpgv is
the simplest way to prevent it.
We are increasing also the "Breaks: apt" version from libapt as it
requires a newer apt-key than might be installed in partial upgrades.
|
|
Some advanced commands can be executed without the keyring being
modified like --verify, so this adds an option to disable the mergeback
and uses it for our gpg calling code.
Git-Dch: Ignore
|
|
apt-key does the keyring merge as we need it, so we just call it instead
of reimplementing it to do the merging before gpgv. This means we don't
use gpgv anymore (we never depended on it explicitly - bad style), but
it also means that the message in apt-cdrom add is a bit less friendly
as it says loudly "untrusted key", but for a one-time command its okay.
|
|
Reported-By: cppcheck
Git-Dch: Ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
|
|
setgroups() returns 0 on success
Git-Dch: ignore
|
|
Some people want to standardize on it, and BSDs do it too, so let's
do the same.
Reported-by: Paul Wise <pabs@debian.org>
|
|
The only thing we are missing is non-portable saved ids support.
|
|
Add a new "Debian-apt" user that owns the /var/lib/apt/lists
and /var/cache/apt/archive directories. The methods
http, https, ftp, gpgv, gzip switch to this user when they
start.
Thanks to Julian and "ioerror" and tors "switch_id()" code.
|
|
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/cachefilter.h
configure.ac
debian/changelog
|
|
incorrect invalidating of unauthenticated data (CVE-2014-0488)
incorect verification of 304 reply (CVE-2014-0487)
incorrect verification of Acquire::Gzip indexes (CVE-2014-0489)
|
|
Only run the Proxy-Auto-Detect code if there is not already
a host specific configuration.
Closes: 759264
|
|
Git-Dch: Ignore
|
|
Conflicts:
apt-pkg/acquire-item.cc
configure.ac
debian/changelog
doc/apt-verbatim.ent
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pt.po
po/ar.po
po/ast.po
po/bg.po
po/bs.po
po/ca.po
po/cs.po
po/cy.po
po/da.po
po/de.po
po/dz.po
po/el.po
po/es.po
po/eu.po
po/fi.po
po/fr.po
po/gl.po
po/hu.po
po/it.po
po/ja.po
po/km.po
po/ko.po
po/ku.po
po/lt.po
po/mr.po
po/nb.po
po/ne.po
po/nl.po
po/nn.po
po/pl.po
po/pt.po
po/pt_BR.po
po/ro.po
po/ru.po
po/sk.po
po/sl.po
po/sv.po
po/th.po
po/tl.po
po/tr.po
po/uk.po
po/vi.po
po/zh_CN.po
po/zh_TW.po
test/integration/test-ubuntu-bug-346386-apt-get-update-paywall
|
|
When doing Acquire::http{,s}::Proxy-Auto-Detect, run the auto-detect
command for each host instead of only once. This should make using
"proxy" from libproxy-tools feasible which can then be used for PAC
style or other proxy configurations.
Closes: #759264
|
|
StringToBool uses strtol() internally to check if the argument is
a number. This function stops when it does not find any more numbers.
So a string like "0ad" (which is a valid packagename) is interpreted
as a "0". The code now checks that the entire string is consumed
not just a part of it. Thanks to Johannes Schauer for raising this
issue.
|
|
This avoid the subtle problem that someone might have a directory
with the same package name as the build-depends he/she is trying
to fetch. Also print a note that the specific file/dir is used.
|
|
|
|
Conflicts:
apt-private/private-install.cc
|
