summaryrefslogtreecommitdiff
path: root/apt-pkg/contrib
AgeCommit message (Collapse)Author
2019-04-12Make the compiler complain less1.4.9+iosSam Bingner
2019-01-22Workaround for shell scriptsSam Bingner
2019-01-22Remove RunCmdSam Bingner
2018-12-26Merge bingner.com:apt1.4.8+iPhone-1Sam Bingner
2018-12-26Merge nitotv apt fixes into 1.4.81.4.8+nitotvSam Bingner
2018-09-30Use access instead of faccessat for iOS5 compatibilitySam Bingner
2018-02-07Lets get those sizes rightJaywalker
2018-02-07Reverting to kb's gpgv version for nowJaywalker
2018-02-07Fixed last few errors. APT is strict...Jaywalker
2018-02-07Missed a semicolonJaywalker
2018-02-06Fixed system() using coolstar's patch and added other required patchesJaywalker
2017-03-19Fix and avoid quoting in CommandLine::AsStringDavid Kalnischkies
In the intended usecase where this serves as a hack there is no problem with double/single quotes being present as we write it to a log file only, but nowadays our calling of apt-key produces a temporary config file containing this "setting" as well and suddently quoting is important as the config file syntax is allergic to it. So the fix is to ignore all quoting whatsoever in the input and just quote (with singles) the option values with spaces. That gives us 99% of the time the correct result and the 1% where the quote is an integral element of the option … doesn't exist – or has bigger problems than a log file not containing the quote. Same goes for newlines in values. LP: #1672710
2017-02-11Don't use -1 fd and AT_SYMLINK_NOFOLLOW for faccessat()Julian Andres Klode
-1 is not an allowed value for the file descriptor, the only allowed non-file-descriptor value is AT_FDCWD. So use that instead. AT_SYMLINK_NOFOLLOW has a weird semantic: It checks whether we have the specified access on the symbolic link. It also is implemented only by glibc on Linux, so it's inherently non-portable. We should just drop it. Thanks: James Clarke for debugging these issues Reported-by: James Clarke <jrtc27@jrtc27.com>
2017-01-30It is NOT OK to just munmap memory from malloc :/.Jay Freeman (saurik)
2017-01-30This is realloc, not reallocf: be more careful :/.Jay Freeman (saurik)
2017-01-30Bill is consistent. Bill is correct. Be like Bill.Jay Freeman (saurik)
2017-01-30You can't just assume the start is always zero :/.Jay Freeman (saurik)
2017-01-30The length given to msync was calculated wrong :/.Jay Freeman (saurik)
2017-01-30Not /not/ immediately mapping a file is INSANE :/.Jay Freeman (saurik)
2017-01-29The entire concept of PendingError() is flawed :/.Jay Freeman (saurik)
2017-01-27avoid malloc if option whitelist is disabled (default)David Kalnischkies
Config options are checked in various paths, so making "useless" memory allocations wastes time and can also cause problems like #852757. The unneeded malloc was added in ae73a2944a89e0d2406a2aab4a4c082e1e9da3f9. (We have no explicit malloc here – its std:string doing this internally)
2017-01-27Bug #807012 also involves package dependencies :/.Jay Freeman (saurik)
2017-01-19fix various typos reported by spellintianDavid Kalnischkies
Most of them in (old) code comments. The two instances of user visible string changes the po files of the manpages are fixed up as well. Gbp-Dch: Ignore Reported-By: spellintian
2017-01-19fix various typos reported by codespellDavid Kalnischkies
Nothing in user visible strings. Gbp-Dch: Ignore Reported-By: codespell
2017-01-17strutl: Provide an APT::String::Join() functionJulian Andres Klode
Thanks: James Clarke <jrtc27@jrtc27.com> for the implementation Gbp-Dch: ignore
2016-12-31allow warning generation for non-whitelisted optionsDavid Kalnischkies
The idea is simple: Each¹ Find*( call starts with a call check if the given option (with the requested type) exists in the whitelist. The whitelist is specified via our configure-index file so that we have a better chance at keeping it current. the whitelist is loaded via a special (undocumented for now) configuration stanza and if none is loaded the empty whitelist will make it so that no warnings are shown. Much needs to be done still, but that is as good a time as any to take a snapshot of the current state and release it into the wild given that it found some bugs already and has no practical effect on users. ¹ not all in this iteration, but many
2016-12-31It is *never* a good idea to throw away stderr :/.Jay Freeman (saurik)
2016-12-31warn if clearsigned file has ignored content partsDavid Kalnischkies
Clearsigned files like InRelease, .dsc, .changes and co can potentially include unsigned or additional messages blocks ignored by gpg in verification, but a potential source of trouble in our own parsing attempts – and an unneeded risk as the usecases for the clearsigned files we deal with do not reasonably include unsigned parts (like emails or some such). This commit changes the silent ignoring to warnings for now to get an impression on how widespread unintended unsigned parts are, but eventually we want to turn these into hard errors.
2016-12-26Wreck validation until we can assess ecosystem :/.Jay Freeman (saurik)
2016-12-08gpgv: Flush the files before checking for errorsJulian Andres Klode
This is a follow up to the previous issue where we did not check if getline() returned -1 due to an end of file or due to an error like memory allocation, treating both as end of file. Here we ensure that we also handle buffered writes correctly by flushing the files before checking for any errors in our error stack. Buffered writes themselves were introduced in 1.1.9, but the function was never called with a buffered file from inside apt until commit 46c4043d741cb2c1d54e7f5bfaa234f1b7580f6c which was first released with apt 1.2.10. The function is public, though, so fixing this is a good idea anyway. Affected: >= 1.1.9
2016-12-08SECURITY UPDATE: gpgv: Check for errors when splitting files (CVE-2016-1252)Julian Andres Klode
This fixes a security issue where signatures of the InRelease files could be circumvented in a man-in-the-middle attack, giving attackers the ability to serve any packages they want to a system, in turn giving them root access. It turns out that getline() may not only return EINVAL as stated in the documentation - it might also return in case of an error when allocating memory. This fix not only adds a check that reading worked correctly, it also implicitly checks that all writes worked by reporting any other error that occurred inside the loop and was logged by apt. Affected: >= 0.9.8 Reported-By: Jann Horn <jannh@google.com> Thanks: Jann Horn, Google Project Zero for reporting the issue LP: #1647467
2016-11-29__deprecated is already defined by sys/cdefs.h :/.Jay Freeman (saurik)
2016-11-29arpa/nameser.h, unlike nameser.h, uses NS_ prefix.Jay Freeman (saurik)
2016-11-24report apt-key errors via status-fd messagesDavid Kalnischkies
We report warnings from apt-key this way already since 29c590951f812d9e9c4f17706e34f2c3315fb1f6, so reporting errors seems like a good addition. Most of those errors aren't really from apt-key through, but from the code setting up and actually calling it which used to just print to stderr which might or might not intermix them with (other) progress lines in update calls. Having them as proper error messages in the system means that the errors are actually collected later on for the list instead of ending up with our relatively generic but in those cases bogus hint regarding "is gpgv installed?". The effective difference is minimal as the errors apply mostly to systems which have far worse problems than a not as nice looking error message, which makes this pretty hard to test – but at least now the hint that your system is broken can be read in proper order (= there aren't many valid cases in which the permissions of /tmp are messed up…). LP: #1522988
2016-11-22Compare size before data when ordering cache bucket entriesJulian Andres Klode
This has the effect of significantly reducing actual string comparisons, and should improve the performance of FindGrp a bit, although it's hardly measureable (callgrind says it uses 10% instructions less now).
2016-11-22Optimize VersionHash() to not need temporary copy of inputJulian Andres Klode
Stop copying stuff, and just parse the bytes one by-one to the newly created AddCRC16Byte. This improves the instruction count for an update run from 720,850,121 to 455,801,749 according to callgrind.
2016-11-22Introduce tolower_ascii_unsafe() and use it for hashingJulian Andres Klode
This one has some obvious collisions for non-alphabetical characters, like some control characters also hashing to numbers, but we don't really have those, and these are hash functions which are not collision free to begin with.
2016-11-11add TMP/TEMP/TEMPDIR to the TMPDIR DropPrivileges danceDavid Kalnischkies
apt tools do not really support these other variables, but tools apt calls might, so lets play save and clean those up as needed. Reported-By: Paul Wise (pabs) on IRC
2016-11-09reset HOME, USER(NAME), TMPDIR & SHELL in DropPrivilegesDavid Kalnischkies
We can't cleanup the environment like e.g. sudo would do as you usually want the environment to "leak" into these helpers, but some variables like HOME should really not have still the value of the root user – it could confuse the helpers (USER) and HOME isn't accessible anyhow. Closes: 842877
2016-11-09add support for Build-Depends/Conflicts-ArchJohannes Schauer
These new enum values might cause "interesting" behaviour in tools not expecting them – like an old apt would think a Build-Conflicts-Arch is some sort of Build-Depends – but that can't reasonably be avoided and effects only packages using B-D/C-A so if there is any breakage the tools can easily be adapted. The APT_PKG_RELEASE number is increased so that libapt users can detect the availability of these new enum fields via: #if APT_PKG_ABI > 500 || (APT_PKG_ABI == 500 && APT_PKG_RELEASE >= 1) Closes: #837395
2016-10-04Do not read stderr from proxy autodetection scriptsJulian Andres Klode
This fixes a regression introduced in commit 8f858d560e3b7b475c623c4e242d1edce246025a don't leak FD in AutoProxyDetect command return parsing which accidentally made the proxy autodetection code also read the scripts output on stderr, not only on stdout when it switched the code from popen() to Popen(). Reported-By: Tim Small <tim@seoss.co.uk>
2016-09-01try not to call memcpy with length 0 in hash calculationsDavid Kalnischkies
memcpy is marked as nonnull for its input, but ignores the input anyhow if the declared length is zero. Our SHA2 implementations do this as well, it was "just" MD5 and SHA1 missing, so we add the length check here as well as along the callstack as it is really pointless to do all these method calls for "nothing". Reported-By: gcc -fsanitize=undefined
2016-08-31Base256ToNum: Fix uninitialized valueJulian Andres Klode
If the inner Base256ToNum() returned false, it did not set Num to a new value, causing it to be uninitialized, and thus might have caused the function to exit despite a good result. Also document why the Res = Num, if (Res != Num) magic is done. Reported-By: valgrind
2016-08-26Make directory paths configurableJulian Andres Klode
This allows other vendors to use different paths, or to build your own APT in /opt for testing. Note that this uses + 1 in some places, as the paths we receive are absolute, but we need to strip of the initial /.
2016-08-26Use C locale instead of C.UTF-8 for protocol stringsJulian Andres Klode
The C.UTF-8 locale is not portable, so we need to use C, otherwise we crash on other systems. We can use std::locale::classic() for that, which might also be a bit cheaper than using locale("C").
2016-08-26Add missing includes and external definitionsJulian Andres Klode
Several modules use std::array without including the array header. Bad modules. Some modules use STDOUT_FILENO and friends, or close() without including unistd.h, where they are defined. One module also uses WIFEXITED() without including sys/wait.h. Finally, environ is not specified to be defined in unistd.h. We are required to define it ourselves according to POSIX, so let's do that.
2016-08-12drop incorrect const attribute from DirectoryExistsDavid Kalnischkies
Since its existence in 2010 DirectoryExists was always marked with this attribute, but for no real reason. Arguably a check for the existence of the file is not modifying global state, so theoretically this shouldn't be a problem. It is wrong from a logical point of view through as between two calls the directory could be created so the promise we made to the compiler that it could remove the second call would be wrong, so API wise it is wrong. It's a bit mysterious that this is only observeable on ppc64el and can be fixed by reordering code ever so slightly, but in the end its more our fault for adding this attribute than the compilers fault for doing something silly based on the attribute. LP: 1473674
2016-08-12fileutl: empty file support: Avoid fstat() on -1 fd and check resultJulian Andres Klode
When checking if a file is empty, we forget to check that fstat() actually worked.
2016-08-12ensure a good clock() value for usage and testsDavid Kalnischkies
We use clock() as a very cheap way of getting a "random" value, but the manpage warns that this could return -1, so we should be dealing with this. Additionally, e.g. on hurd-i386 the value increases only slowly – to slow for our fast running tests for randomness hence producing the same range in both samples, so we introduce a simple busy-wait loop (as clock is counting processor time used by the program) in the test which delays the second sample just enough making our randomness a bit more predictable.
2016-08-11Merge branch 'feature/methods'David Kalnischkies