| Age | Commit message (Collapse) | Author |
|---|
|
Regression introduced in 8f858d560e3b7b475c623c4e242d1edce246025a.
Commands are probably better of always having output through as the
fall through to the generic proxy settings is likely not intended. As
documenting and implementing this more consistently is kind of a
regression through, it is split off into the next commit.
Closes: 827713
|
|
As reported upstream in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71556
the implementation of std::get_time is currently not as accepting as
strptime is, especially in how hours should be formatted.
Just reverting 9febc2b238e1e322dce1f94ecbed46d595893b52 would be
possible, but then we would reopen the problems fixed by it, so instead
I opted here for a rewrite of the parsing logic which makes this method
a lot longer, but at least it provides the same benefits as the rewrite
in std::get_time was intended to give us and decouples us from the fix
of the issue in the standard library implementation of GCC.
LP: 1593583
|
|
We usually use absolute paths to specific the location of dpkg, apt-key
and the like, but there is nothing wrong with using just the command
name and instead let exec(3) make the lookup in PATH.
We had a wild mixture before, so opting for the more accepting option
out of the two seems about right especially as it makes no difference in
the default case as apt uses absolute paths.
|
|
Just closing the fd would be enough, but while we are at it we can also
use the Popen interface to have an easier time with this.
|
|
Seen first in #826783, but as this buglog also shows leaked uncompressed
files as well we don't close it just yet.
|
|
This effects only compressors configured on the fly (rather then the
inbuilt ones as they use a library).
|
|
|
|
HTTP/1.1 hardcodes GMT (RFC 7231 §7.1.1.1) and what is good enough for the
internet must be good enough for us™ as we reuse the implementation
internally to parse (most) dates we encounter in various places like the
Release files with their Date and Valid-Until header fields.
Implementing a fully timezone aware parser just feels too hard for no
effective benefit as it would take 5+ years (= until LTS's are out of
fashion) until a repository could use non-UTC dates and expect it to
work. Not counting non-apt implementations which might or might not
only want to encounter UTC here as well.
As a bonus, this eliminates the use of an instance of setlocale in
libapt.
Closes: 819697
|
|
Setting the C++ locale via std::locale::global(std::locale("")); which
would otherwise default to the default C locale (aka: unaffected by
setlocale) effects the formatting of numeric types in IO streams, which
for output for humans is perfectly sensible, but breaks our many text
interfaces used and parsed by us and others without expecting the
numbers to be formatted.
Closes: #825396
|
|
The &= introduced in the EDSP-FileFd conversion isn't working to full
satisfaction for multiple && clauses as the && has a higher binding than
&= has, so that the methods were called even through they shouldn't
have because of previous errors. Using variadic functions we can solve
this in a slightly cleaner way bringing down the amount of 'broken pipe'
errors for the error case of the dump resolver substantially.
Git-Dch: Ignore
|
|
I doubt there is any non-src:apt usage of these interfaces.
|
|
Improve GetLocalitySortedVersionSet, speeds up apt search by 30%
|
|
The actual reason for this commit isn't the limit – there isn't much
point in using that much nesting – its in shutting up gcc mostly:
apt/apt-pkg/contrib/configuration.cc: In function ‘bool ReadConfigFile(Configuration&, const string&, const bool&, const unsigned int&)’:
apt/apt-pkg/contrib/configuration.cc:686:20: warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
string Stack[100];
^
by replacing this with C++s handy std::stack container (adapter).
Also cleans some whitespace noise from the file in the process.
|
|
|
|
If the file is in a failed state there is no point in trying to flush
out the buffers as the file is to be discarded anyhow & its likely all
this flushing is producing is additional error messages.
Git-Dch: Ignore
|
|
|
|
Hardly noticeable, but given that we have the option to easily enable
it, lets enable it as every newline in the message is written
individually by the code.
|
|
Some methods had it missing, some used the keyword directly, which isn't
a problem as it is a cc file, but for consistency lets stick to our
macro for now.
Git-Dch: Ignore
|
|
Introduces APT::Hashes::<NAME> with entries Untrusted and Weak
which can be set to true to cause the hash to be treated as
untrusted and/or weak.
|
|
This avoids templates using StringView to be exported, such as
std::vector<StringView*>::emplace_back().
Gbp-Dch: ignore
|
|
SHA1 is not reasonably secure anymore, so we should not consider it
usable anymore. The test suite is adjusted to account for this.
|
|
This effectively merges branch 'typofixes-vlajos-20150807' of github.com:vlajos/apt
with the following commit:
commit 13cacb3e2e2352ba701e769fc889e3344fabbf7e
Author: Veres Lajos <vlajos@gmail.com>
Date: Sun Aug 9 00:12:53 2015 +0100
typofix - https://github.com/vlajos/misspell_fixer
It has been rebased for a better commit message.
|
|
The liblzma-based write code needs the same tweaks that the read code
already has to cope with the situation where lzma_code returns zero the
first time through because avail_out is zero, but will do more work if
called again.
This ports the read tweaks to the write code as closely as possible
(including matching comments etc.).
Closes: #751688
|
|
If we just reopened the file, we also need to reset the current
seek position when we reset the buffer, otherwise the code will
not try to seek to the position given to Skip (from 0), but will
try to seek to old offset + the position given to skip.
Closes: #812994, #813000
|
|
When writing into the buffer write to free() bytes starting
at getend(), instead of buffersize_max bytes at get()
-> get() is a read pointer.
This makes no difference in practice though, as we reset
the buffer before the call, so start = end = 0.
Gbp-Dch: ignore
|
|
We cannot just return false without setting an error,
as InternalWrite does not set one itself.
|
|
Microoptimization, but still gives a measurable 2-3% improvement
when using commands with lots of output like `apt list`.
|
|
It makes no sense to split a large block into multiple small
blocks, so when we have the chance to write them unbuffered,
do so.
|
|
We do not need the loop, FileFd::Private() handles this for us.
Gbp-Dch: ignore
|
|
We want to check whether the amount of free space is smaller
than the requested write size. Checking maxsize - size() is
incorrect for bufferstart >= 0, as size() = end - start.
Gbp-Dch: ignore
|
|
|
|
gcc correctly reports that we check for the same value twice, expect
that the manpage of read(2) tells us to do it for portability, so to
make both sides happy lets add a little #if'ing here.
Reported-By: gcc-6
Git-Dch: Ignore
|
|
APT::StringView is supposed to be a temporary measure, until support
for the standardized string_view is widely available. Introducing
additional unstandardized features just makes porting to the
standard version harder.
The constexpr constructor also won't have any real effect on most
systems, as the compiler will happily optimise the strlen() call
away for constant strings.
Gbp-Dch: ignore
|
|
The commit also adds a few trivial tests
Git-Dch: Ignore
|
|
The position returned is supposed to be the position of the character
counted from the start of the string, but if we used the substr calling
overloads the skipped over prefix wasn't considered. The pos parameter
of rfind had also the wrong semantic.
|
|
By storing the size of the string in the cache, we can make use of
it when comparing the names in the hashtable in pkgCache::FindGrp.
|
|
Hide the std::string overload instead of providing a
const char * one, the old variant was stupid.
Gbp-Dch: ignore
|
|
Use the same path for both comparisons, as the operator== path
is faster than just calling compare() - it avoids any comparison
if the size differs.
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
Thanks: Niels Thykier for reporting on IRC
Gbp-Dch: ignore
|
|
This improves performance of the cache generation on my
ARM platform (4x Cortex A15) by about 10% to 20% from
2.35-2.50 to 2.1 seconds.
|
|
The class APT::StringView implements a drop-in replacement
for a subset of C++17 std::string_view() features. It will
be dropped at a later point and may not be used in public
interfaces.
|
|
This is a multiple of the page size and thus results in less
page faults, speeding up copying.
Also, while we're at at, unify all uses of that size in a
constant variable APT_BUFFER_SIZE.
|
|
Implement native support for LZ4 compression, using the official
lz4 library.
|
|
This makes code easier to read, and somewhat more correct.
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
This shuts up gcc
Gbp-Dch: ignore
|
|
To preserve compatibility, the new inline functions have _inline
as a suffix, and a macro defines the old names to refer to the
inline variants.
The old functions are still preserved for binary compatibility.
Also simplify the implementation of both functions.
|
|
Previously, if flush errored inside the loop, data could have
already been written to the wrapped descriptor without having
been removed from the buffer.
Also try to work around EINTR here. A better solution might be
to have the individual privates detect an interrupt and return
0 in such a case, instead of relying on errno being untouched
in between the syscall and the return from InternalWrite.
|
