summaryrefslogtreecommitdiff
path: root/apt-pkg/contrib
AgeCommit message (Collapse)Author
2016-01-03simple_buffer: Allow buffer size to changeJulian Andres Klode
Gbp-Dch: ignore
2015-12-29strutl.cc: Add declarations for the compat _ascii() functionsJulian Andres Klode
This shuts up gcc Gbp-Dch: ignore
2015-12-29Turn tolower_ascii() and isspace_ascii() into inline functionsJulian Andres Klode
To preserve compatibility, the new inline functions have _inline as a suffix, and a macro defines the old names to refer to the inline variants. The old functions are still preserved for binary compatibility. Also simplify the implementation of both functions.
2015-12-28BufferedFileFdPrivate: Make InternalFlush() save against errorsJulian Andres Klode
Previously, if flush errored inside the loop, data could have already been written to the wrapped descriptor without having been removed from the buffer. Also try to work around EINTR here. A better solution might be to have the individual privates detect an interrupt and return 0 in such a case, instead of relying on errno being untouched in between the syscall and the return from InternalWrite.
2015-12-28BufferedWriter: flushing: Check for written < size instead of <=Julian Andres Klode
This avoids some issues with InternalWrite returning 0 because it just cannot write stuff at the moment.
2015-12-27FileFd: Add a buffered writing modeJulian Andres Klode
This is somewhat experimental right now, and might not work for everyone, so it is on an opt-in basis.
2015-12-27FildFd: Introduce a Flush() function and call it from Close()Julian Andres Klode
The flush function can be used for buffered writers.
2015-12-27FileFdPrivate: Add getter and setter for fieldsJulian Andres Klode
We will soon implement a buffered writing decorator and we will need to forward attribute changes to those.
2015-12-27fileutl: simple_buffer: Add write() and full() methodsJulian Andres Klode
These can be used to implement write buffering Gbp-Dch: ignore
2015-12-27fileutl: simple_buffer: Mark accessors as constJulian Andres Klode
Suggested by David. Gbp-Dch: ignore
2015-12-27FileFdPrivate: Extract SimpleBuffer and mark it as hiddenJulian Andres Klode
Gbp-Dch: ignore
2015-12-27Hex2Digit: Do not use isxdigit()Niels Thykier
We directly check if we are a hex digit in HexDigit, so use that information. [jak@debian.org: Commit message wording]
2015-12-27Convert most callers of isspace() to isspace_ascii()Julian Andres Klode
This converts all callers that read machine-generated data, callers that might work with user input are not converted.
2015-12-27Introduce isspace_ascii() for use by parsersJulian Andres Klode
This is like isspace(), but ignores the current locale.
2015-12-26Refactor InternalReadLine to not unroll Size == 0 caseJulian Andres Klode
There is not much point and this is more readable. Gbp-Dch: ignore
2015-12-26Change InternalReadLine to always use buffer.read() return valueJulian Andres Klode
This is mostly a documentation issue, as the size we want to read is always less than or equal to the size of the buffer, so the return value will be the same as the size argument. Nonetheless, people wondered about it, and it seems clearer to just always use the return value.
2015-12-26Get rid of memmove() in our read bufferingJulian Andres Klode
This further improves our performance, and rred on uncompressed files now spents 78% of its time in writing. Which means that we should really look at buffering those.
2015-12-26Use a hardcoded buffer size of 4096 to fix performanceJulian Andres Klode
The code uses memmove() to move parts of the buffer to the front when the buffer is only partially read. By simply reading one page at a time, the maximum size of bytes that must be moved has a hard limit, and performance improves: In one test case, consisting of a 430 MB Contents file, and a 75K PDiff, applying the PDiff previously took about 48 seconds and now completes in 2 seconds. Further speed up can be achieved by buffering writes, they account for about 60% of the run-time now.
2015-12-24Mark all FileFdPrivate classes as hidden1.1.6Julian Andres Klode
Gbp-Dch: ignore
2015-12-23fix new[] vs delete mismatch introduced by b3db9d81David Kalnischkies
And as we are at it lets fix the 'style' issue I introduced with the filefd changes as well. Reported-By: gcc -fsanitize's & cppcheck Git-Dch: Ignore
2015-12-23use a dynamic buffer for ReadLineDavid Kalnischkies
We don't need the buffer that often - only for ReadLine - as it is only occasionally used, so it is actually more efficient to allocate it if needed instead of statically by default. It also allows the caller to influence the buffer size instead of hardcoding it. Git-Dch: Ignore
2015-12-23implement a buffer system for FileFd::ReadLineDavid Kalnischkies
The default implementation of ReadLine was very naive by just reading each character one-by-one. That is kinda okay for libraries implementing compression as they have internal buffers (but still not great), but while working with files directly or via a pipe as there is no buffer there so all those reads are in fact system calls. This commit introduces an internal buffer in the FileFd implementation which is only used by ReadLine. The more low-level Read and all other actions remain unbuffered – they just changed to deal with potential "left-overs" in the buffer correctly. Closes: 808579
2015-12-22parse xz-compression level from configurationDavid Kalnischkies
If we use the library to compress xz, still try to understand and pick up the arguments we would have used to call xz to figure out which level the user wants us to use instead of defaulting to level 6 (which is the default level of xz).
2015-12-22follow dpkg and xz and use CRC64 for xz compressionDavid Kalnischkies
dpkg switched from CRC32 to CRC64 in 777915108d9d36d022dc4fc4151a615fc95e5032 with the message: | This is the default CRC used by the xz command-line tool, align with | it and switch from CRC32 to CRC64. It should provide slightly better | detection against damaged data, at a negligible speed difference.
2015-12-22shuffle compressor-specific code into private subclassesDavid Kalnischkies
This isn't implementing any new features, it is "just" moving code around from FileFd methods which decided on each call how to handle the request by including all logic for all possible compressor backends in the method body to a model in which backend-specifics are implemented in a FileFdPrivate subclass. This avoids a big chunk of #ifdef's and should make it a tiny bit more obvious which backend uses which code. The execution of the idea is slightly uglified by the need to preserve ABI and API which causes liberal befriending. Git-Dch: Ignore
2015-12-19Do not try to read in FileFd::Read() if Size is 0Julian Andres Klode
There's no point trying to read 0 bytes, so let's just not do this and switch to a while loop like in Write(). Gbp-Dch: ignore
2015-12-19Do nothing in FileFd::Write() if Size is 0Julian Andres Klode
Turn the do-while loop into while loops, so it simply does nothing if the Size is already 0. This reverts commit c0b271edc2f6d9e5dea5ac82fbc911f0e3adfa7a which introduced a fix for a specific instance of the issue in the CopyFile() function. Closes: #808381
2015-12-19CopyFile: avoid failing on EOF on some systemsPino Toscano
On EOF, ToRead will be 0, which might trigger on some systems (e.g. on the Hurd) an error due to the invalid byte count passed to write(). The whole loop already checks for ToRead != 0, so perform the writing step only when there was actual data read. Closes: #808381
2015-12-19CopyFile: fix BufSize to a sane valuePino Toscano
Commit e977b8b9234ac5db32f2f0ad7e183139b988340d tries to make BufSize calculated based on the size of the buffer; the problem is that std::unique_ptr::size() returns a pointer to the data, so sizeof() equals to the size of a pointer (later divided by sizeof(char), which is 1). The result is that the CopyFile copies in chunks of 8 bytes, which is not exactly ideal... As solution, declare BufSize in advance, and use its value to allocate the Buf array. Closes: #808381
2015-12-13fix typos and docs in GlobalError documentationDavid Kalnischkies
Reported-By: Manuel A. Fernandez Montecelo <mafm@debian.org> Git-Dch: Ignore
2015-12-11mmap: Define _DEFAULT_SOURCE instead of _BSD_SOURCEJulian Andres Klode
Fixes a warning reported by gcc. Gbp-Dch: ignore
2015-11-29doc: VerifyFile checks all hashes instead of best onlyDavid Kalnischkies
The implementation changed in 495b7a615a2d8f485beadf88c6ed298f5bbe50c2 Git-Dch: Ignore Reported-By: Julian Andres Klode <jak@debian.org>
2015-11-28Revert "Revert "appease adequate with some weak symbols for -private""Julian Andres Klode
This reverts commit 7ac9386cb6e272625490fcf3e8183b45e28bbc43.
2015-11-28Revert "appease adequate with some weak symbols for -private"Julian Andres Klode
This reverts commit 28f24d3dad1844af316337d565ba2ebc11c8ce97. This fails on Ubuntu as they build with -Bsymbolic-functions.
2015-11-28disable privilege-drop verification by default as fakeroot trips over itDavid Kalnischkies
Dropping privileges is an involved process for code and system alike so ideally we want to verify that all the work wasn't in vain. Stuff designed to sidestep the usual privilege checks like fakeroot (and its many alternatives) have their problem with this through, partly through missing wrapping (#806521), partly as e.g. regaining root from an unprivileged user is in their design. This commit therefore disables most of these checks by default so that apt runs fine again in a fakeroot environment. Closes: 806475
2015-11-28show the group we failed to drop via setgroupsDavid Kalnischkies
This also deals with the unlikely case of groups being mentioned multiple times or if the effective group isn't mentioned at all. In practice, it is a debugging aid through like for #806475. Git-Dch: Ignore
2015-11-27add messages to our deprecation warnings in libaptDavid Kalnischkies
Git-Dch: Ignore
2015-11-27appease adequate with some weak symbols for -privateDavid Kalnischkies
Closes: #806422
2015-11-21review of new/changed translatable program stringsJustin B Rye
Reference mail: https://lists.debian.org/debian-l10n-english/2015/11/msg00006.html
2015-11-20do not segfault in cache generation on mmap failureDavid Kalnischkies
Out of memory and similar circumstanzas could cause MMap::Map to fail and especially the mmap/malloc calls in it. With some additional checking we can avoid segfaults and similar in such situations – at least in theory as if this is a real out of memory everything we do to handle the error could just as well run into a memory problem as well… But at least in theory (if MMap::Map is made to fail always) we can deal with it so good that a user actually never sees a failure (as the cache it tries to load with it fails and is discarded, so that DynamicMMap takes over and a new one is build) instead of segfaulting. Closes: 803417
2015-11-19support setting empty values (sanely) & removing support forDavid Kalnischkies
space-gapping: '-o option= value' That is a very old feature (straight from 1998), but it is super surprising if you try setting empty values and instead get error messages or a non-empty value as the next parameter is treated as the value – which could have been empty, so if for some reason you need a compatible way of setting an empty value try: '-o option="" ""'. I can only guess that the idea was to support '-o option value', but we survived 17 years without it, we will do fine in the future I guess. Similar is the case for '-t= testing' even through '-t testing' existed before and the code even tried to detect mistakes like '-t= -b' … all gone now. Technically that is as its removing a feature replacing it with another a major interface break. In practice I really hope for my and their sanity that nobody was using this; but if for some reaon you do: Remove the space and be done. I found the patch and the bugreport actually only after the fact, but its reassuring that others are puzzled by this as well and hence a thanks is in perfect order here as the patch is practical identical [expect that this one here adds tests and other bonus items]. Thanks: Daniel Hartwig for initial patch. Closes: 693092
2015-11-19do not use _apt for file/copy sources if it isn't world-accessibleDavid Kalnischkies
In 0940230d we started dropping privileges for file (and a bit later for copy, too) with the intend of uniforming this for all methods. The commit message says that the source will likely fail based on the compressors already – and there isn't much secret in the repository content. After all, after apt has run the update everyone can access the content via apt anyway… There are sources through which worked before which are mostly single-deb (and those with the uncompressed files available). The first one being especially surprising for users maybe, so instead of failing, we make it so that apt detects that it can't access a source as _apt and if so doesn't drop (for all sources!) privileges – but we limit this to file/copy, so the uncompress which might be needed will still fail – but that failed before this regression. We display a notice about this, mostly so that if it still fails (e.g. compressed) the user has some idea what is wrong. Closes: 805069
2015-11-05encode UTF-8 characters correctly in QuoteStringDavid Kalnischkies
Limit the field length to a char to avoid bogus FF for utf-8 characters with the default length. Closes: 799123
2015-11-04wrap every unlink call to check for != /dev/nullDavid Kalnischkies
Unlinking /dev/null is bad, we shouldn't do that. Also, we should print at least a warning if we tried to unlink a file but didn't manage to pull it of (ignoring the case were the file is /dev/null or doesn't exist in the first place). This got triggered by a relatively unlikely to cause problem in pkgAcquire::Worker::PrepareFiles which would while temporary uncompressed files (which are set to keep compressed) figure out that to files are the same and prepare for sharing by deleting them. Bad move. That also shows why not printing a warning is a bad idea as this hide the error for in non-root test runs. Git-Dch: Ignore
2015-11-04ensure FileFd doesn't try to open /dev/null as atomic and coDavid Kalnischkies
The wrapping will fail in the best case and actually end up deleting /dev/null in the worst case. Given that there is no point in trying to write atomically to /dev/null as you can't read from it again just ignore these flags if higher level code ends up trying to use them on /dev/null. Git-Dch: Ignore
2015-11-04move apts cmdline helper type into -privateDavid Kalnischkies
Its not as simple as I initially thought to abstract this enough to make it globally usable, so lets not pollute global namespace with this for now. Git-Dch: Ignore
2015-11-04new quiet level -qq for apt to hide progress outputDavid Kalnischkies
-q is for logging and -qqq (old -qq) basically kills every output expect errors, so there should be a way of declaring a middleground in which the output of e.g. 'update' isn't as verbose, but still shows some things. The test framework was actually making use of by accident as it ignored the quiet level in output setup for apt before. Eventually we should figure out some better quiet levels for all tools…
2015-11-04deduplicate main methodsDavid Kalnischkies
All mains pretty much do the same thing, so lets try a little harder to move the common parts into -private to have the real differences more visible. Git-Dch: Ignore
2015-11-04split up help messages for simpler reuseDavid Kalnischkies
That is one huge commit with busy work only: Help messages used to be one big translateable string, which is a pain for translators and hard to reuse for us. This change there 'explodes' this single string into new string for each documented string trying hard to split up the translated messages as well. This actually restores many translations as previously adding a single command made all of the bug message fuzzy. The splitup also highlighted that its easy to forget a line, duplicate one and similar stuff. Git-Dch: Ignore
2015-11-04add binary-specific options via Binary scopeDavid Kalnischkies
Especially with apt now, it can be useful to set an option only for apt and not for apt-get. Using a binary-specific subtree which is merged into the root seems like a simple enough trick to achieve this.