| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
This new field allows a repository to declare that access to
packages requires authorization. The current implementation will
set the pin to -32768 if no authorization has been provided in
the auth.conf(.d) files.
This implementation is suboptimal in two aspects:
(1) A repository should behave more like NotSource repositories
(2) We only have the host name for the repository, we cannot use
paths yet.
- We can fix those after an ABI break.
The code also adds a check to acquire-item.cc to not use the
specified repository as a download source, mimicking NotSource.
|
|
If we limit a file to be signed by a certain key it should usually
accept also being signed by any of this keys subkeys instead of
requiring each subkey to be listed explicitly. If the later is really
wanted we support now also the same syntax as gpg does with appending an
exclamation mark at the end of the fingerprint to force no mapping.
|
|
cppcheck reports: (error) Iterator 't' used after element has been erased.
The loop is actually fashioned to deal with this (not in the most
efficient way, but in simplest and speed isn't really a concern here)
IF this codepath had a "break" at the end… so I added one.
Note that the tests aren't failing before (and hopefully after) the
change as the undefined behavior we encounter is too stable.
Thanks: David Binderman for reporting
|
|
By restricting the Date field to be in the past, an attacker cannot
just create a repository from the future that would be accepted as
a valid update for a repository.
This check can be disabled by Acquire::Check-Date set to false. This
will also disable Check-Valid-Until and any future date related checking,
if any - the option means: "my computers date cannot be trusted."
Modify the tests to allow repositories to be up to 10 hours in the
future, so we can keep using hours there to simulate time changes.
|
|
Allow specifying an alternative path to the InRelease file, so
you can have multiple versions of a repository, for example.
Enabling this option disables fallback to Release and Release.gpg,
so setting it to InRelease can be used to ensure that only that
will be tried.
We add two test cases: One for checking that it works, and another
for checking that the fallback does not happen.
Closes: #886745
|
|
We have quite a bit of metadata available for the files we acquire, but
the methods weren't told about it and got just the URI. That is indeed
fine for most, but to avoid methods trying to parse the metadata out of
the provided URIs (and fail horribly in edgecases) we can just as well
be nice and tell them stuff directly.
|
|
gcc has problems understanding this construct and additionally thinks it
would produce multiple lines and stuff, so to keep using it isn't really
worth it for the few instances we have: We can just write the long form
there which works better.
Reported-By: gcc
Gbp-Dch: Ignore
|
|
In commit Do not warn about duplicate "legacy" targets, we
we added an if, that changed the .po files...
|
|
If a source has a legacy Contents file, and two lines mention
the same archive but different components, a warning would be
issued that is confusing. So, as the field is named Contents-deb-legacy,
let's just not print warnings for fields containing "legacy".
LP: #1697120
Closes: #839259
|
|
This makes it easier to see which headers includes what.
The changes were done by running
git grep -l '#\s*include' \
| grep -E '.(cc|h)$' \
| xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/'
To modify all include lines by adding a space, and then running
./git-clang-format.sh.
|
|
Commit d7c92411dc1f4c6be098d1425f9c1c075e0c2154 parses the Components
section of (In)Release and attempts to detect the distribution's
supported components. While doing so, it handles component names with
slashes in a special manner, assuming that the actual component is only
the part after the final slash. This is done to handle
security.debian.org, which usually appears in sources.list as follows:
deb http://s.d.o/debian-security stretch/updates main contrib non-free
while the actual release file has:
Codename: stretch
Components: updates/main updates/contrib updates/non-free
While this special handing on APTs part indeed works for
debian-security, it emits spurious warnings on repositories that
actually use slashes in the component names *and* appear so in
sources.list.
We fix this by adding both component versions (whole and final part) to
the SupportedComponents array.
Closes: #868127
|
|
This gives the repository owner a chance to explain why this change was
needed – e.g. explaining the organisational changes or simply detailing
the changes in the new release made. Note that this URI is also shown
if the change is accepted, so it also draws attention to release notes
of minor updates (if users watch apt output closely).
|
|
The value of Origin, Label, Codename and co can be used in user
configuration from apts own pinning to unattended upgrades.
A repository changing this values can therefore have serious effects on
the behaviour of apt and other tools using these values.
In a first step we will generate error messages for these changes now
explaining the need for explicit confirmation and provide config options
and commandline flags to accept them.
|
|
If we couldn't find an entry for a Sources file we would generate an
error while for a Packages file we would silently skip it due to
assuming it is missing because it is empty. We can do better by checking
if the repository declares that it supports a component we want to get
the file from and if not say so and hint at the user making a typo.
An example were this helps is mozilla.debian.net which dropped the
firefox-aurora component (as upstream did) meaning no upgrades until the
user notices manually that the repository doesn't provide packages
anymore. With this commit warnings are raised hopefully causing the user
to investigate what is wrong (sooner).
|
|
This can happen e.g. for file: repositories. There is no inherent
problem with setting such values internally, but its bad style,
forbidden in the manpage and could be annoying in the future.
Gbp-Dch: Ignore
|
|
If a user explicitly requests the download of arch:all apt shouldn't get
in the way and perform its detection dance if arch:all packages are
(also) in arch:any files or not.
This e.g. allows setting arch=all on a source with such a field (or one
which doesn't support all at all, but has the arch:all files like Debian
itself ATM) to get only the arch:all packages from there instead of
behaving like a no-op.
Reported-By: Helmut Grohne on IRC
|
|
Moving code around into some more dedicated methods, no effective code
change itself.
Gbp-Dch: Ignore
|
|
Weak had no dedicated option before and Insecure and Downgrade were both
global options, which given the effect they all have on security is
rather bad. Setting them for individual repositories only isn't great
but at least slightly better and also more consistent with other
settings for repositories.
|
|
APT can be forced to deal with repositories which have no security
features whatsoever, so just giving up on repositories which "just" fail
our current criteria of good security features is the wrong incentive.
Of course, repositories are better of fixing their setup to provide the
minimum of security features, but sometimes this isn't possible:
Historic repositories for example which do not change (anymore).
That also fixes problem with repositories which are marked as trusted,
but are providing only weak security features which would fail the
parsing of the Release file.
Closes: 827364
|
|
Merging by URI means that having sources lines with different URI
methods results in 'strange' warning and error messages, which aren't
very friendly from a user point of view as not encoding the method in
the filename is effectivly an implementation detail.
Merging by filename removes these messages and makes everything "work"
even if it isn't working the way it is configured as the indexes aren't
acquired over the method given, but over the first method for this
release file (which argueably is an implementation detail stemming from
the filename encoding, too).
So either direction isn't perfectly "right", but personally I prefer
"magic" over strange error messages (and doing a full-circle detection
of this with its own messages which would need to be translated feels
like way too much effort for dubious gain).
Closes: 826944
|
|
This fixes comparisons where either the stored or the input string
have a trailing comma.
|
|
This hopefully makes debugging things easier.
|
|
This prevented some sources.list entries from working, an example
of which can be found in the test.
|
|
A frontend like apt-file is only interested in a specific set of files
and selects those easily via "Created-By". If it supports two locations
for those files through it would need to select both and a user would
need to know that implementation detail for sources.list configuration.
The "Identifier" field is hence introduced which by default has the same
value as "Created-By", but can be freely configured – especially it can
be used to give two indexes the same identifier.
|
|
Sometimes index files are in different locations in a repository as it
is currently the case for Contents files which are per-component in
Debian, but aren't in Ubuntu. This has historic reasons and is perhaps
changed soon, but such cases of transitions can always happen in the
future again, so we should prepare:
Introduced is a new field declaring that the current item should only be
downloaded if the mentioned item wasn't allowing for transitions without
a flagday in clients and archives.
This isn't implemented 'simpler' with multiple MetaKeys as items (could)
change their descriptions and perhaps also other configuration bits with
their location.
|
|
It looks a bit strange on the outside to have multiple "native
architecture", but all is considered an implementation detail and e.g.
packages of arch:all are in dependency resolution equal to native
packages.
|
|
We don't have to initialize the Release files with a set of IndexTargets
to acquire, but instead wait for the Release file to be acquired and
only then ask which IndexTargets to get.
Git-Dch: Ignore
|
|
Users have the option since apt >= 1.1 to enforce that a Release file is
signed with specific key(s) either via keyring filename or fingerprints.
This commit adds an entry with the same name and value (except that it
doesn't accept filenames for obvious reasons) to the Release file so
that the repository owner can set a default value for this setting
effecting the *next* Release file, not the current one, which provides a
functionality similar "HTTP Public Key Pinning". The pinning is in
effect as long as the (then old) Release file is considered valid, but
it is also ignored if the Release file has no Valid-Until at all.
|
|
A keyring file can include multiple keys, so its only fair for
transitions and such to support multiple fingerprints as well.
|
|
|
|
The Date field in the Release file is useful to avoid allowing an
attacker to 'downgrade' a user to earlier Release files (and hence to
older states of the archieve with open security bugs). It is also needed
to allow a user to define min/max values for the validation of a Release
file (with or without the Release file providing a Valid-Until field).
APT wasn't formally requiring this field before through and (agrueable
not binding and still incomplete) online documentation declares it
optional (until now), so we downgrade the error to a warning for now to
give repository creators a bit more time to adapt – the bigger ones
should have a Date field for years already, so the effected group should
be small in any case.
It should be noted that earlier apt versions had this as an error
already, but only showed it if a Valid-Until field was present (or the
user tried to used the configuration items for min/max valid-until).
Closes: 809329
|
|
Downloading and storing are two different operations were different
compression types can be preferred. For downloading we provide the
choice via Acquire::CompressionTypes::Order as there is a choice to
be made between download size and speed – and limited by whats available
in the repository.
Storage on the other hand has all compressions currently supported by
apt available and to reduce runtime of tools accessing these files the
compression type should be a low-cost format in terms of decompression.
apt traditionally stores its indexes uncompressed on disk, but has
options to keep them compressed. Now that apt downloads additional files
we also deal with files which simply can't be stored uncompressed as
they are just too big (like Contents for apt-file). Traditionally they
are downloaded in a low-cost format (gz) as repositories do not provide
other formats, but there might be even lower-cost formats and for
download we could introduce higher-cost in the repositories.
Downloading an entire index potentially requires recompression to
another format, so an update takes potentially longer – but big files
are usually updated via pdiffs which has to de- and re-compress anyhow
and does it on the fly anyhow, so there is no extra time needed and in
general it seems to be benefitial to invest the time in update to save
time later on file access.
|
|
Debian has a Packages file for arch:all already, but the arch:any files
contain arch:all packages as well, so downloading it would be a total
waste of resources. Getting this solved is on the list of things to do,
but it is also the hardest part – for index targets like Contents the
situation is much easier and less server/client implementations are
involved so we might not want to stall them.
A repository can now declare via:
No-Support-for-Architecture-all: Packages
that even if an arch:all Packages exists, it shouldn't be downloaded, so
that support for Contents files can be added now.
See also 1dd20368486820efb6ef4476ad739e967174bec4 for the implementation
of downloading arch:all index targets, which this is limiting.
The field uses the name of the target from the apt configuration for
simplicity and is negative by design as this field is intended to be
supported/needed only for a "short" time (one or two Debian releases).
While this commit theoretically supports any target, its expected to
only see "Packages" as a value in reality.
|
|
If we can't work with the hashes we parsed from the Release file we
display now an error message if the Release file includes only weak
hashes instead of downloading the indexes and failing to verify them
with "Hash Sum mismatch" even through the hashes didn't mismatch (they
were just weak).
If for some (unlikely) reason we have got weak hashes only for
individual targets we will show a warning to this effect (again, befor
downloading and failing the index itself).
Closes: 806459
|
|
Reference mail:
https://lists.debian.org/debian-l10n-english/2015/11/msg00006.html
|
|
Based on a discussion with Niels Thykier who asked for Contents-all this
implements apt trying for all architecture dependent files to get a file
for the architecture all, which is treated internally now as an official
architecture which is always around (like native). This way arch:all
data can be shared instead of duplicated for each architecture requiring
the user to download the same information again and again.
There is one problem however: In Debian there is already a binary-all/
Packages file, but the binary-any files still include arch:all packages,
so that downloading this file now would be a waste of time, bandwidth
and diskspace. We therefore need a way to decide if it makes sense to
download the all file for Packages in Debian or not. The obvious answer
would be a special flag in the Release file indicating this, which would
need to default to 'no' and every reasonable repository would override
it to 'yes' in a few years time, but the flag would be there "forever".
Looking closer at a Release file we see the field "Architectures", which
doesn't include 'all' at the moment. With the idea outlined above that
'all' is a "proper" architecture now, we interpret this field as being
authoritative in declaring which architectures are supported by this
repository. If it says 'all', apt will try to get all, if not it will be
skipped. This gives us another interesting feature: If I configure a
source to download armel and mips, but it declares it supports only
armel apt will now print a notice saying as much. Previously this was a
very cryptic failure. If on the other hand the repository supports mips,
too, but for some reason doesn't ship mips packages at the moment, this
'missing' file is silently ignored (= that is the same as the repository
including an empty file).
The Architectures field isn't mandatory through, so if it isn't there,
we assume that every architecture is supported by this repository, which
skips the arch:all if not listed in the release file.
|
|
This changes the semantics of the option (which is renamed too) to be a
yes/no value with the special additional value "force" as this allows
by-hash to be disabled even if the repository indicates it would be
supported and is more in line with our other yes/no options like pdiff
which disable themselves if no support can be detected.
The feature wasn't documented so far and hasn't reached a (un)stable
release yet, so changing it without trying too hard to keep
compatibility seems okay.
|
|
Our error reporting is historically grown into some kind of mess.
A while ago I implemented stacking for the global error which is used in
this commit now to wrap calls to functions which do not report (all)
errors via return, so that only failures in those calls cause a failure
to propergate down the chain rather than failing if anything
(potentially totally unrelated) has failed at some point in the past.
This way we can avoid stopping the entire acquire process just because a
single source produced an error for example. It also means that after
the acquire process the cache is generated – even if the acquire
process had failures – as we still have the old good data around we can and
should generate a cache for (again).
There are probably more instances of this hiding, but all these looked
like the easiest to work with and fix with reasonable (aka net-positive)
effects.
|
|
Multiple targets downloading the same file is bad™ as it leads us to all
sorts of problems like the acquire system breaking or simply a problem
of which settings to use for them. Beside that this is most likely a
mistake and silently ignoring it doesn't help the user realizing his
mistake…
On the other hand, we have 'duplicates' which are 'created' by how we
create indextargets, so we have to prevent those from being created to
but do not emit a warning for them as this is an implementation detail.
And then, there is the absolute and most likely user mistake: Having the
same target(s) activated in multiple entries.
|
|
|
|
Some targets like Contents-udeb are special-needs targets. Shipping the
configuration snippet for them is okay, but they shouldn't be downloaded
by default. Forcing the user to enable targets by uncommenting targets
is wrong and this would still not really solve the problem completely as
even if you want to download some -udebs it will probably not be for all
sources you have enabled, so having the possibility of disabling a
target by default, but giving the user the option to enable it on a
per-source entry basis is better.
|
|
Nobody knows what makes the 'unable to optimize loop' warning to appear
in the sourceslist minus-options parsing, especially if we use a foreach
loop, but we can replace it with some nice c++11 algorithm+lambda usage,
which also helps in making even clearer what happens here.
And as this would be a lonely change, lets do it for a few more loops as
well where I might or might not have seen the warning at some point in
time, too.
Git-Dch: Ignore
|
|
Some additional files like 'Contents' are very big and should therefore
kept compressed on the disk, which apt-file did in the past. It also
implemented pdiff patching of these files by un- and recompressing these
files on-the-fly, with this commit we can do the same – but we can do
this in both pdiff patching styles (client and server merging) and
secured by hashes.
Hashes are in so far slightly complicated as we can't compare the hashes
of the compressed files as we might compress them differently than the
server would (different compressor versions, options, …), so we must
compare the hashes of the uncompressed content.
While this commit has changes in public headers, the classes it changes
are marked as hidden, so nobody can use them directly, which means the
ABI break is internal only.
|
|
Disabling pdiffs can be useful occasionally, like if you have a fast
local mirror where the download doesn't matter, but still want to use it
for non-local mirrors. Also, some users might prefer it to only use it
for very big indextargets like Contents.
|
|
While Target{,-Add,-Remove} is available for configuring IndexTargets
already, allow Targets to be mentioned explicitely as yes/no options as
well, so that the Target 'Contents' can be disabled via 'Contents: no'
as well as 'Target-Remove: Contents'.
|
|
Sometimes too much refactoring can have bad effects.
Thanks: Niels Thykier for reporting on IRC
Git-Dch: Ignore
|
|
|
