| Age | Commit message (Collapse) | Author |
|---|
|
Doing this disables the implicit copy assignment operator (among others)
which would cause hovac if used on the classes as it would just copy the
pointer, not the data the d-pointer points to. For most of the classes
we don't need a copy assignment operator anyway and in many classes it
was broken before as many contain a pointer of some sort.
Only for our Cacheset Container interfaces we define an explicit copy
assignment operator which could later be implemented to copy the data
from one d-pointer to the other if we need it.
Git-Dch: Ignore
|
|
We used to read the Release file for each Packages file and store the
data in the PackageFile struct even through potentially many Packages
(and Translation-*) files could use the same data. The point of the
exercise isn't the duplicated data through. Having the Release files as
first-class citizens in the Cache allows us to properly track their
state as well as allows us to use the information also for files which
aren't in the cache, but where we know to which Release file they
belong (Sources are an example for this).
This modifies the pkgCache structs, especially the PackagesFile struct
which depending on how libapt users access the data in these structs can
mean huge breakage or no visible change. As a single data point:
aptitude seems to be fine with this. Even if there is breakage it is
trivial to fix in a backportable way while avoiding breakage for
everyone would be a huge pain for us.
Note that not all PackageFile structs have a corresponding ReleaseFile.
In particular the dpkg/status file as well as *.deb files have not. As
these have only a Archive property need, the Component property takes
over this duty and the ReleaseFile remains zero. This is also the reason
why it isn't needed nor particularily recommended to change from
PackagesFile to ReleaseFile blindly. Sticking with the earlier is
usually the better option.
|
|
Conflicts:
apt-pkg/acquire-item.cc
cmdline/apt-key.in
methods/https.cc
test/integration/test-apt-key
test/integration/test-multiarch-foreign
|
|
libapt can be configured to write various bits of information to a file
creating a report via apport. This is disabled by default in Debian and
apport residing only in /experimental so far, but Ubuntu and other
derivatives have this (in some versions) enabled by default and there is
no regression potentially here.
The crash is caused by a mismatch of operations vs. strings for
operations, so adding the missing strings for these operations solves
the problem.
[commit message by David Kalnischkies]
LP: #1436626
|
|
|
|
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of
not logging terminal in case stdin & stdout are not a terminal. The
problem is that we are then trying to pass-through stdin content by
reading from the apt-process stdin and writing it to the stdin of the
child (dpkg), which works great for users who can control themselves,
but pipes and co are a bit less forgiving causing us to pass everything
to the first child process, which if the sending part of the pipe is
e.g. 'yes' we will never see the end of it (as the pipe is full at some
point and further writing blocks).
There is a simple solution for that of course: If stdin isn't a terminal,
we us the apt-process stdin as stdin for the child directly (We don't do
this if it is a terminal to be able to save the typed input in the log).
Closes: 773061
|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Note that dpkg currently has a workaround implemented to allow upgrades
to jessie to be clean, so that the test works before and after. Also
note that test (compared to the one in the bug) drops the await test as
its is considered a loop by dpkg now.
Closes: 769609
|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Closes: 769609
|
|
We were already considering these cases, but the code was flawed, so
that packages changing architectures are incorrectly handled and hence
the wrong architecture is used to call dpkg with, so that dpkg says the
package isn't installed (which it isn't for the requested architecture).
Closes: 770898
|
|
We run dpkg on its own pty, so we can log its output and have our own
output around it (like the progress bar), while also allowing debconf
and configfile prompts to happen.
In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to
constantly reopening the slave for kfreebsd. This has the sideeffect
though that in some cases slave and master will lose their connection on
linux, so that no output is passed along anymore. We fix this by having
always an fd referencing the slave open (linux), but we don't use it
(kfreebsd).
Failing to get our PTY up and running has many (bad) consequences
including (not limited to, nor all at ones or in any case) garbled ouput,
no output, no logging, a (partial) mixture of the previous items, …
This commit is therefore also reshuffling quiet a bit of the creation
code to get especially the output part up and running on linux and the
logging for kfreebsd.
Note that the testcase tries to cover some cases, but this is an
interactivity issue so only interactive usage can really be a good test.
Closes: 765687
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
We run dpkg on its own pty, so we can log its output and have our own
output around it (like the progress bar), while also allowing debconf
and configfile prompts to happen.
In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to
constantly reopening the slave for kfreebsd. This has the sideeffect
though that in some cases slave and master will lose their connection on
linux, so that no output is passed along anymore. We fix this by having
always an fd referencing the slave open (linux), but we don't use it
(kfreebsd).
Failing to get our PTY up and running has many (bad) consequences
including (not limited to, nor all at ones or in any case) garbled ouput,
no output, no logging, a (partial) mixture of the previous items, …
This commit is therefore also reshuffling quiet a bit of the creation
code to get especially the output part up and running on linux and the
logging for kfreebsd.
Note that the testcase tries to cover some cases, but this is an
interactivity issue so only interactive usage can really be a good test.
Closes: 765687
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
Git-Dch: Ignore
|
|
Conflicts:
debian/changelog
|
|
Git-Dch: ignore
|
|
Instead of hardcoding Dpkg::MaxArgBytes find out about it using
the sysconf(_SC_ARG_MAX) call.
|
|
Accessing the package records to acquire this information is pretty
costly, so that information wasn't used so far in many places. The most
noticeable user by far is EDSP at the moment, but there are ideas to
change that which this commit tries to enable.
|
|
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/cachefilter.h
configure.ac
debian/changelog
|
|
A pty slave we have got from openpty can only be used for one dpkg
child, if we give it to a second child on kfreebsd setting TIOCSCTTY
fails causing the output to be stair-stepped from now on.
By switching the code to creating a master and opening a new slave in
the child for each child we can fix this glitch, so that at least the
master remains stable.
Closes: 759684
|
|
APT treats upgrades like installs and dpkg is very similar in this, but
prints still a slightly different processing message indicating that it
is really an upgrade which we hadn't parsed so far, but this wasn't
really visible as we quickly moved on to a 'known' state.
More problematic was the reinstall case as apt hadn't recognized this
for the package name detection, so that reinstalls had no progress since
we introduced MultiArch.
|
|
Conflicts:
apt-pkg/acquire-item.cc
configure.ac
debian/changelog
doc/apt-verbatim.ent
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pt.po
po/ar.po
po/ast.po
po/bg.po
po/bs.po
po/ca.po
po/cs.po
po/cy.po
po/da.po
po/de.po
po/dz.po
po/el.po
po/es.po
po/eu.po
po/fi.po
po/fr.po
po/gl.po
po/hu.po
po/it.po
po/ja.po
po/km.po
po/ko.po
po/ku.po
po/lt.po
po/mr.po
po/nb.po
po/ne.po
po/nl.po
po/nn.po
po/pl.po
po/pt.po
po/pt_BR.po
po/ro.po
po/ru.po
po/sk.po
po/sl.po
po/sv.po
po/th.po
po/tl.po
po/tr.po
po/uk.po
po/vi.po
po/zh_CN.po
po/zh_TW.po
test/integration/test-ubuntu-bug-346386-apt-get-update-paywall
|
|
- update string matching for dpkg I/O errors. (LP: #1363257)
- properly parse the dpkg status line so that package name is properly set
and an apport report is created. Thanks to Anders Kaseorg for the patch.
(LP: #1353171)
|
|
|
|
Conflicts:
debian/changelog
|
|
Reported-By: clang++ -Werror
|
|
Conflicts:
apt-pkg/cachefilter.h
apt-pkg/contrib/fileutl.cc
apt-pkg/contrib/netrc.h
apt-pkg/deb/debsrcrecords.cc
apt-pkg/init.h
apt-pkg/pkgcache.cc
debian/apt.install.in
debian/changelog
|
|
Closes: 746434
|
|
|
|
If a external command closes the PIPE unexpectedly, do not crash
in pkgDPkgPM::RunScriptsWithPkgs but ignore the SIGPIPE.
|
|
This debug option will display all scripts that are run
by apts RunScripts and RunScriptsWithPkgs helpers.
|
|
We have to properly close our pseudo terminals even in error cases
before we call post-invoke scripts. This is done now by breaking from
the dpkg calling loop instead of copying the handling, which did it in
the wrong order before.
This also ensures that our state file is written in error cases to
record autobit and co as this was forgotten before.
Closes: 738969
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
Conflicts:
apt-private/private-list.cc
configure.ac
debian/apt.install.in
debian/changelog
|
|
Conflicts:
apt-private/private-list.cc
doc/po/de.po
test/integration/framework
|
|
Show a proper error message when a ioctl() in dpkgpm.cc fails.
Also simply StartPtyMagic() a bit.
|
|
The most "visible" change is from utime to utimensat/futimens
as the first one isn't part of POSIX anymore.
Reported-By: cppcheck
Git-Dch: Ignore
|
|
Conflicts:
apt-pkg/install-progress.cc
|
|
|
|
This fixes a regression in the conffile prompt for the progress-fd
and adds a testcase to ensure this does not regress again.
|
|
apport reporting is still disabled by default, but it is available in
Debian/experimental at the moment and a diff is not a good idea anyway.
|
|
|
|
|
|
|
|
APT::Keep-Fds hack and also add a new PackageManagerProgressFd::StartDpkg() progress state
|
|
|
|
APT_PKG_MINOR >= 13)
|
