| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This avoids a lot of problems from local installations of
scripting languages and other stuff in /usr/local for which
maintainer scripts are not prepared.
[v3: Inherit PATH during tests, check overrides work]
[v2: Add testing]
|
|
Some post-invoke scripts install packages, which fails because
the environment variable is not set. This sets the variable for
all three kinds of scripts {pre,post-}invoke and pre-install-pkgs,
but we will only allow post-invoke at a later time.
Gbp-Dch: full
|
|
We are seeing 'processing' messages from dpkg first, so it makes sense
to translate them to "Preparing" messages instead of using "Installing"
and co to override these shortly after with the "Preparing" messages.
The difference isn't all to visible as later messages tend to linger far
longer in the display than the ealier ones, but at least in a listing it
seems more logical.
|
|
The progress reporting relies on parsing the status reports of
dpkg which used to repeat being in the same state multiple times
in the same run, but by fixing #365921 it will stop doing so.
The problem is in theory just with 'config-files' in case we do purge as
this (can) do remove + purge in one step, but we remove this also for
the unpack + configure combination althrough we handle these currently
in two independent dpkg calls.
|
|
Exiting the processing loop as soon as the dpkg process finishes might
leave status-fd lines unprocessed which wasn't much of a problem in the
past as the progress would just be slightly off, but now that we us the
information also for skipping already done tasks and generate warnings
if we didn't see all expected messages we should make sure we seem them
all. We still need to exit "early" if dpkg exited unsuccessfully/crashed
through as the (remaining) status lines we get could be incomplete.
|
|
The dpkg frontend lock is a lock dpkg tries to acquire
except if the frontend already acquires it.
This fixes a race condition in the install command where the
dpkg lock is not held for a short period of time between
different dpkg invocations.
For this reason we also define an environment variable
DPKG_FRONTEND_LOCKED for dpkg invocations so dpkg knows
not to try to acquire the frontend lock because it's held
by a parent process.
We can set DPKG_FRONTEND_LOCKED only if the frontend lock
really is held; that is, if our lock count is greater than 0
- otherwise an apt client not using the LockInner family of
functions would run dpkg without the frontend lock set, but
with DPKG_FRONTEND_LOCKED set. Such a process has a weaker
guarantee: Because dpkg would not lock the frontend lock
either, the process is prone to the existing races, and,
more importantly, so is a new style process.
Closes: #869546
[fixups: fix error messages, add public IsLocked() method, and
make {Un,}LockInner return an error on !debSystem]
|
|
The summary line sounds a bit much: what we end up doing is just adding
two more guards before using results which should always be valid™.
That these values aren't valid is likely a bug in itself somewhere, but
that is no reason for crashing.
|
|
Mostly harmless as it just means that apt thinks that the dpkg
commandline it is building is slightly longer than it actually is and we
have various ways of avoiding generating very long lines nowadays, but
calculating the right value can't hurt.
Reported-By: gcc -Wmultistatement-macros
|
|
APT by default logs terminal (term.log) and actions (history.log), but
if either or Dir::Log directly is set to /dev/null it continues to do
so, which isn't too bad – just wasted effort – but term.log is
chmodded to protect it from the general public (as it may contain
otherwise private data the admin entired in the terminal) which
shouldn't happen for /dev/null.
|
|
This makes it easier to see which headers includes what.
The changes were done by running
git grep -l '#\s*include' \
| grep -E '.(cc|h)$' \
| xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/'
To modify all include lines by adding a space, and then running
./git-clang-format.sh.
|
|
Including cacheiterators.h before pkgcache.h fails because
pkgcache.h depends on cacheiterators.h.
|
|
Most of them in (old) code comments. The two instances of user visible
string changes the po files of the manpages are fixed up as well.
Gbp-Dch: Ignore
Reported-By: spellintian
|
|
Nothing in user visible strings.
Gbp-Dch: Ignore
Reported-By: codespell
|
|
Interpreting a boolean as an int works just fine – it just hasn't the
intended result – it isn't a serious problem through as the disabling of
the usage of this dpkg calling style is just an "optimization"
|
|
Unlikely to have any practical effect, but its more consistent to use
the right methods instead of performing it slightly incorrect by hand.
Gbp-Dch: Ignore
|
|
|
|
We try to configure all packages at the end which need to be configured,
but that also applies to packages which weren't completely installed
(e.g. maintainerscript failed) we end up removing in this interaction
instead.
APT doesn't perform this explicit configure in the end as it is using
"dpkg --configure --pending", but it does confuse the progress report
and potentially also hook scripts.
Regression-Of: 9ffbac99e52c91182ed8ff8678a994626b194e69
|
|
dpkg stumbles over these (#844300) and we haven't dropped 'easier'
removes to be implicit and to be scheduled by dpkg by default so far
so we shouldn't push the decision in such cases to dpkg either.
|
|
Our old idea was to look for the first package which would be "touched"
and take this as the package dpkg is talking about, but that is
incorrect in complicated situations like a package upgraded to/from
multiple M-A:same siblings installed.
As we us the progress report to decide what is still needed we have to
be reasonabily right about the package dpkg is talking about, so we jump
to quite a few loops to get it.
|
|
Given that we use the progress information to skip over actions dpkg has
already done like not purging a package which was already removed and
had no config files or not acting on disappeared packages and such it is
important that apt and dpkg agree on which states the package has to
pass through.
To ensure that we keep tabs on this in the future a warning is added at
the end if apt hasn't seen all the action it was supposed to see. I
can't wait for the first bugreporters to wonder about this…
|
|
If a package is triggered dpkg frequently issues two messages about it
causing us to make a note about it both times which messes up our
planned dpkg actions view. Adding these actions if we have nothing else
planned fixes this and should still be correct as those planned actions
will deal with the triggering just fine and we avoid strange problems
like a package triggered before its removed…
|
|
|
|
Several modules use std::array without including the
array header. Bad modules.
Some modules use STDOUT_FILENO and friends, or close()
without including unistd.h, where they are defined.
One module also uses WIFEXITED() without including
sys/wait.h.
Finally, environ is not specified to be defined in unistd.h. We
are required to define it ourselves according to POSIX, so let's
do that.
|
|
Ubuntu uses *.ddeb files for their debug packages, but the interface we
are using since f495992428a396e0f98886c9a761a804aa161c68 to talk to dpkg
isn't supporting *.ddeb files. This used to work previously as apt itself
isn't caring about the filenames at all and if they are explicitly
mentioned dpkg will accept all, too.
It might or might not be a good idea to patch dpkg, too, but regardless
of it happening, we don't want to couple us to closely to dpkg for this
minor feature but testing for this at runtime as it would delay shipping
the fix for the too long commandlines further.
It is also questionable if it is really a good idea to allow any file
extension to be used here (like .foobar in the testcase), but we used to
and we tend to avoid breaking existing usecases if we can help it.
As a bonus, this also allows the installation of ddeb files directly
from the commandline as you can with deb files already. We continue to
ignore udeb through as the user-mistake to useful ratio is too high.
LP: #1616909
|
|
In most cases apt was already skipping the (re)setting of packages as
to be removed/purged if dpkg had told us that it already did, but we
haven't dealt with it in the most obvious of the cases: Selections set
for packages we touched in this operation which either restores
selections even dpkg would have overridden or e.g. tries to restore a
purge selection for a package which was just purged – does not happen
with apt itself as it isn't using selections in this way, but higher
frontends like aptitude do.
The result in the later case is a warning printed by dpkg that we try to
set selections for an unknown package, which is harmless per se, but can
be confusing for users and we really shouldn't cause warnings in dpkg if
we can help it.
Reported-By: Guillem Jover on IRC
|
|
Commit 7ec343309b7bc6001b465c870609b3c570026149 got us most of the way,
but the last mile was botched by having the pending calls in the wrong
order as this way we potentially 'force' dpkg to remove/purge a package
it doesn't want to as another package still depends on it and the
replacement isn't fully installed yet.
So what we do now is a configure before remove and purge (all with
--no-triggers) and finishing off with another configure pending call to
take care of the triggers.
Note that in the bugreport example our current planner is forcing dpkg
to remove the package earlier via --force-depends which we could do for
the pending calls as well and could be used as a workaround, but we want
to do less forcing eventually.
Closes: 835094
|
|
Instead of erroring out when receiving a SIGINT, let the
child deal with it - we'll error out anyway if the child
exits with an error or due to the signal. Also ignore
SIGQUIT, as system() ignores it.
This basically fixes Bug #832593, but: we are running
the hooks via sh -c. Some shells exit with a signal
error even if the command they are executing catches
the signal and exits successfully. So far, this has
been noticed on dash, which unfortunately, is our
default shell.
Example:
$ cat trap.sh
trap 'echo int' INT; sleep 10; exit 0
$ if dash -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi
^Cint
FAIL: 130
$ if mksh -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi
^Cint
OK: 0
$ if bash -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi
^Cint
OK: 0
|
|
With b4450f1dd6bca537e60406b2383ab154a3e1485f we dropped what we
calculated here later on and now that we don't need it in the meantime
either we can just skip the busy work by default and expect dpkg to do
the right thing dropping also our little "last explicit configures"
removal trick introduced in b4450f1dd6bca537e60406b2383ab154a3e1485f.
This enables the last of a bunch of previously experimental options,
some of them existing still, but are very special and hence not really
worth documenting anymore (especially as it would need to be rewritten
now entirely) which is why the documentation is nearly completely
dropped.
The order of configuration stanzas in the simulation code changes
slightly as it isn't concerning itself with finding the 'right' order,
but any order is valid anyhow as long as the entire set happens in the
same call.
|
|
If a planner lets actions to be figured out by dpkg in pending calls
these actions aren't mentioned in a simulation. While that might be
a good thing for debugging, it would be a change in behavior and
especially if a planner avoids explicit removals could be confusing for
users. As such we perform the same 'trick' as in the dpkg implementation
by performing explicitly what would be done by the pending calls.
To save us some work and avoid desyncs we perform a layer violation by
using deb/ code in the generic simulation – and further we perform ugly
dynamic_cast to avoid breaking the ABI for nothing; aptitude is the only
other user of the simulation class according to codesearch.d.n and for
that our little trick works. It just isn't working if you happen to
extend pkgSimulate or otherwise manage to call the protected Go methods
directly – which isn't very realistic/practical.
|
|
The user has to approve the removal of a crossgraded package as it might
be needed to remove it (temporarily) in the process, but in most cases
we can happily avoid it and let dpkg unpack over it skipping the
remove. This has some effects on progress reporting and how deal with
selections through which makes this a tiny bit complicated.
|
|
Same reason and implementation as for configure.
|
|
A planner might not explicitly configure all packages, but we need to
know all packages which will be configured for progress reporting and to
tell the hook scripts about them as they rely on this for their own
functionality.
|
|
If we want a package to be purged from the system tell dpkg in the
ordering (if it has to touch it explicitly) to remove it and cover the
purging of the config files at the end with a --purge --pending call.
That should help packages move conffiles around between packages
correctly even if the user is purging packages directly in big actions
like dist-upgrades involving many packages.
|
|
Implemented a long while ago now with relatively good progress reporting
involving triggers is a good time to try delaying the execution of
triggers across dpkg invocations finally by default.
Note: The bugreport talks also about 'smarter' configuration which is a
much bigger part and approached from multiple directions, but doesn't
really involve triggers per-se so considering it decoupled should help
in getting it done…
Closes: #626599
|
|
Telling dpkg early on that we are going to remove these packages later
helps it with auto-deconfiguration decisions and its another area where
a planner can ignore the nitty gritty details and let dpkg decide the
course of action if there are no special requirements.
|
|
dpkg decides certain things on its own based on selections and
especially if we want to call --pending on purge/remove actions, we need
to ensure a clean slate or otherwise we surprise the user by removing
packages we weren't allowed to remove by the user in this run (the
selection might be an overarching plan for the not-yet "future").
Ideally dpkg would have some kind of temporal selection interface for
this case, but it hasn't, so we make it temporal with the risk of
loosing state if we don't manage to restore them.
|
|
Having long commandlines split into two is a huge problem if it happens
and additionally if we want to introduce planners which perform less
micromanagment its a good idea to leave the details for dpkg to decide.
In practice this doesn't work yet unconditionally as a bug is hiding in
the ordering code of dpkg, but it works if apt imposes its ordering so
this commit allows for now at least to solve the first problem.
|
|
APT (usually) knows which package is essential or not, so we can avoid
passing this force flag to dpkg unconditionally if the user hasn't
chosen a non-default essential handling obscuring the information.
|
|
|
|
This was dropped in autotools as I found no use of the HAVE_PTSNAME_R
macro. Turns out it was typoed as HAVE_PTS_NAME_R. Fix the #ifdef and
add checks to CMake for it.
Closes: #833674
|
|
If we receive an interrupt, set a flag and do not abort
immediately without waiting for the child. Once the child
exited, exit with an error if the interrupted flag is set.
Closes: #832593
|
|
APT doesn't know which packages will be triggered in the course of
actions, so it can't plan to see them for progress beforehand, but if it
sees that dpkg says that a package was triggered we can add additional
states. This is pretty much magic – after all it sets back the progress
– and there are cornercases in which this will result in incorrect
totals (package in partial states may or may not loose trigger states),
but the worst which can happen is that the progress is slightly
incorrect and doesn't reach 100%, but so be it. Better than being stuck
at 100% for a while as apt isn't realizing that a bunch of triggers
still need to be processed.
|
|
Hardcoding /var/crash means we can't test it properly and it isn't
really our style.
|
|
The progress reporting for a package sheduled for purging only included
the states dpkg passes through while actually purging the package – if
the package was fully installed before dpkg will pass first through all
remove states before purging it, so in the interest of consistent
reporting our progress reporting should do that, too.
|
|
Writing first means that even in the event of a power-failure the
autobit is saved for future processing instead of "forgotten" so that
the package is treated as manually installed.
In some cases we have to re-run the writing after dpkg is done through
as dpkg can let packages disappear and in such cases apt will move
autobits around (or in that case non-autobits) which we need to store.
|
|
This reverts commit 2b8221d66a8284042fc53c7bbb14bb9750e9137f.
Avoiding the use of GCC >= 5 stuff lets use go back to 4.8 simplifying
the travis setup again as well as reducing the backport requirements in
general.
This is possible because the std::get_time use requiring GCC >= 5 in
9febc2b238e1e322dce1f94ecbed46d595893b52 was replaced by handrolling it
in 1d742e01470bba27715a8191c50adde4b39c2f19, so the remaining uses are
just small conviniences we can do without.
Gbp-Dch: Ignore
|
|
Not a big deal to leak fds in debugging mode, but for completeness.
Git-Dch: Ignore
|
|
The comment says it should have been removed with Lenny+1 which is a
small while ago already, so it seems like a good time now…
And as this is a cleanup commit it also gets right of spurious
whitespace at the end of lines, adds missing fold markers and similar
busy work.
Git-Dch: Ignore
|
