summaryrefslogtreecommitdiff
path: root/apt-pkg/deb/dpkgpm.cc
AgeCommit message (Collapse)Author
2015-12-07Avoid overflow when summing up file sizesJulian Andres Klode
We need to pass 0llu instead of 0 as the init value, otherwise std::accumulate will calculate with ints. Reported-by: Raphaël Hertzog
2015-11-05apply various suggestions made by cppcheckDavid Kalnischkies
Reported-By: cppcheck Git-Dch: Ignore
2015-11-05do not use read() returned value unconditionallyDavid Kalnischkies
A slightly unlikely bug, but lets fix it while slightly reworking this whole function to be slightly saner to look at, even if still not good. Git-Dch: Ignore
2015-11-04wrap every unlink call to check for != /dev/nullDavid Kalnischkies
Unlinking /dev/null is bad, we shouldn't do that. Also, we should print at least a warning if we tried to unlink a file but didn't manage to pull it of (ignoring the case were the file is /dev/null or doesn't exist in the first place). This got triggered by a relatively unlikely to cause problem in pkgAcquire::Worker::PrepareFiles which would while temporary uncompressed files (which are set to keep compressed) figure out that to files are the same and prepare for sharing by deleting them. Bad move. That also shows why not printing a warning is a bad idea as this hide the error for in non-root test runs. Git-Dch: Ignore
2015-11-04sanify API to get 'the' candidate versionDavid Kalnischkies
This was discussed a while ago on #debian-apt and now that I see myself making this mistake lets bite the bullet and fix it in the easy way out version: Using a new name which fits with a similar named setter and deprecate the old method instead of 'hostily' changing API. Closes: #803471
2015-11-04implement a public pkgSystem::MultiArchSupportedDavid Kalnischkies
Some codepaths need to check if the system (in our case usually dpkg) supports MultiArch or not. We had copy-pasted the check so far into these paths, but having it as a system check is better for reusability.
2015-10-30dpkgpm: Convert users of localtime() to localtime_r()Julian Andres Klode
The former is not thread-safe, whereas the latter is. Gbp-Dch: ignore
2015-10-30dpkgpm: Use ptsname_r() instead of ptsname() to be thread-safeJulian Andres Klode
This function only exists on a limited number of platforms, so we add a configure check to make sure it exists. Gbp-Dch: ignore
2015-10-30dpkgpm: Convert ctime() call to ctime_r()Julian Andres Klode
ctime() is not thread-safe, ctime_r() is. Gbp-Dch: ignore
2015-09-14avoid using global PendingError to avoid failing too often too soonDavid Kalnischkies
Our error reporting is historically grown into some kind of mess. A while ago I implemented stacking for the global error which is used in this commit now to wrap calls to functions which do not report (all) errors via return, so that only failures in those calls cause a failure to propergate down the chain rather than failing if anything (potentially totally unrelated) has failed at some point in the past. This way we can avoid stopping the entire acquire process just because a single source produced an error for example. It also means that after the acquire process the cache is generated – even if the acquire process had failures – as we still have the old good data around we can and should generate a cache for (again). There are probably more instances of this hiding, but all these looked like the easiest to work with and fix with reasonable (aka net-positive) effects.
2015-08-17Cleanup includes after running iwyuMichael Vogt
2015-08-12Do not set unhonored DPKG_NO_TSTP variable for dpkgGuillem Jover
Support for that variable was removed in dpkg in 1.15.6, in commit 6f037003e8b96878b485efb7cbd1f846e3bf4e97. Closes: #765366
2015-08-10remove the compatibility markers for 4.13 abiDavid Kalnischkies
We aren't and we will not be really compatible again with the previous stable abi, so lets drop these markers (which never made it into a released version) for good as they have outlived their intend already. Git-Dch: Ignore
2015-08-10fix memory leaks reported by -fsanitizeDavid Kalnischkies
Various small leaks here and there. Nothing particularily big, but still good to fix. Found by the sanitizers while running our testcases. Reported-By: gcc -fsanitize Git-Dch: Ignore
2015-08-10make all d-pointer * const pointersDavid Kalnischkies
Doing this disables the implicit copy assignment operator (among others) which would cause hovac if used on the classes as it would just copy the pointer, not the data the d-pointer points to. For most of the classes we don't need a copy assignment operator anyway and in many classes it was broken before as many contain a pointer of some sort. Only for our Cacheset Container interfaces we define an explicit copy assignment operator which could later be implemented to copy the data from one d-pointer to the other if we need it. Git-Dch: Ignore
2015-06-12store Release files data in the CacheDavid Kalnischkies
We used to read the Release file for each Packages file and store the data in the PackageFile struct even through potentially many Packages (and Translation-*) files could use the same data. The point of the exercise isn't the duplicated data through. Having the Release files as first-class citizens in the Cache allows us to properly track their state as well as allows us to use the information also for files which aren't in the cache, but where we know to which Release file they belong (Sources are an example for this). This modifies the pkgCache structs, especially the PackagesFile struct which depending on how libapt users access the data in these structs can mean huge breakage or no visible change. As a single data point: aptitude seems to be fine with this. Even if there is breakage it is trivial to fix in a backportable way while avoiding breakage for everyone would be a huge pain for us. Note that not all PackageFile structs have a corresponding ReleaseFile. In particular the dpkg/status file as well as *.deb files have not. As these have only a Archive property need, the Component property takes over this duty and the ReleaseFile remains zero. This is also the reason why it isn't needed nor particularily recommended to change from PackagesFile to ReleaseFile blindly. Sticking with the earlier is usually the better option.
2015-04-19Merge branch 'debian/jessie' into debian/experimentalDavid Kalnischkies
Conflicts: apt-pkg/acquire-item.cc cmdline/apt-key.in methods/https.cc test/integration/test-apt-key test/integration/test-multiarch-foreign
2015-04-07fix crash in order writing in pkgDPkgPM::WriteApportReport()Michael Vogt
libapt can be configured to write various bits of information to a file creating a report via apport. This is disabled by default in Debian and apport residing only in /experimental so far, but Ubuntu and other derivatives have this (in some versions) enabled by default and there is no regression potentially here. The crash is caused by a mismatch of operations vs. strings for operations, so adding the missing strings for these operations solves the problem. [commit message by David Kalnischkies] LP: #1436626
2015-03-16merge debian/sid into debian/experimentalDavid Kalnischkies
2014-12-23pass-through stdin fd instead of content if not a terminalDavid Kalnischkies
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of not logging terminal in case stdin & stdout are not a terminal. The problem is that we are then trying to pass-through stdin content by reading from the apt-process stdin and writing it to the stdin of the child (dpkg), which works great for users who can control themselves, but pipes and co are a bit less forgiving causing us to pass everything to the first child process, which if the sending part of the pipe is e.g. 'yes' we will never see the end of it (as the pipe is full at some point and further writing blocks). There is a simple solution for that of course: If stdin isn't a terminal, we us the apt-process stdin as stdin for the child directly (We don't do this if it is a terminal to be able to save the typed input in the log). Closes: 773061
2014-12-23always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Note that dpkg currently has a workaround implemented to allow upgrades to jessie to be clean, so that the test works before and after. Also note that test (compared to the one in the bug) drops the await test as its is considered a loop by dpkg now. Closes: 769609
2014-12-23do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-10do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-07always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Closes: 769609
2014-12-07correct architecture detection for 'rc' packages for purgeDavid Kalnischkies
We were already considering these cases, but the code was flawed, so that packages changing architectures are incorrectly handled and hence the wrong architecture is used to call dpkg with, so that dpkg says the package isn't installed (which it isn't for the requested architecture). Closes: 770898
2014-11-28fix PTY interaction on linux and kfreebsdDavid Kalnischkies
We run dpkg on its own pty, so we can log its output and have our own output around it (like the progress bar), while also allowing debconf and configfile prompts to happen. In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to constantly reopening the slave for kfreebsd. This has the sideeffect though that in some cases slave and master will lose their connection on linux, so that no output is passed along anymore. We fix this by having always an fd referencing the slave open (linux), but we don't use it (kfreebsd). Failing to get our PTY up and running has many (bad) consequences including (not limited to, nor all at ones or in any case) garbled ouput, no output, no logging, a (partial) mixture of the previous items, … This commit is therefore also reshuffling quiet a bit of the creation code to get especially the output part up and running on linux and the logging for kfreebsd. Note that the testcase tries to cover some cases, but this is an interactivity issue so only interactive usage can really be a good test. Closes: 765687
2014-11-28close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-19fix PTY interaction on linux and kfreebsdDavid Kalnischkies
We run dpkg on its own pty, so we can log its output and have our own output around it (like the progress bar), while also allowing debconf and configfile prompts to happen. In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to constantly reopening the slave for kfreebsd. This has the sideeffect though that in some cases slave and master will lose their connection on linux, so that no output is passed along anymore. We fix this by having always an fd referencing the slave open (linux), but we don't use it (kfreebsd). Failing to get our PTY up and running has many (bad) consequences including (not limited to, nor all at ones or in any case) garbled ouput, no output, no logging, a (partial) mixture of the previous items, … This commit is therefore also reshuffling quiet a bit of the creation code to get especially the output part up and running on linux and the logging for kfreebsd. Note that the testcase tries to cover some cases, but this is an interactivity issue so only interactive usage can really be a good test. Closes: 765687
2014-11-18close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-08guard ABI changes for SourcePkg/Ver in pkgCacheDavid Kalnischkies
Git-Dch: Ignore
2014-11-05Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: debian/changelog
2014-10-23Fix incorrect comparison between signed/unsignedMichael Vogt
Git-Dch: ignore
2014-10-23Use sysconf(_SC_ARG_MAX) to find the size of Dpkg::MaxArgBytesMichael Vogt
Instead of hardcoding Dpkg::MaxArgBytes find out about it using the sysconf(_SC_ARG_MAX) call.
2014-09-27store source name and version in binary cacheDavid Kalnischkies
Accessing the package records to acquire this information is pretty costly, so that information wasn't used so far in many places. The most noticeable user by far is EDSP at the moment, but there are ideas to change that which this commit tries to enable.
2014-09-23Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/acquire-item.cc apt-pkg/acquire-item.h apt-pkg/cachefilter.h configure.ac debian/changelog
2014-09-08rework PTY magic to fix stair-stepping on kfreebsdDavid Kalnischkies
A pty slave we have got from openpty can only be used for one dpkg child, if we give it to a second child on kfreebsd setting TIOCSCTTY fails causing the output to be stair-stepped from now on. By switching the code to creating a master and opening a new slave in the child for each child we can fix this glitch, so that at least the master remains stable. Closes: 759684
2014-09-08fix progress report for upgrade and reinstallDavid Kalnischkies
APT treats upgrades like installs and dpkg is very similar in this, but prints still a slightly different processing message indicating that it is really an upgrade which we hadn't parsed so far, but this wasn't really visible as we quickly moved on to a 'known' state. More problematic was the reinstall case as apt hadn't recognized this for the package name detection, so that reinstalls had no progress since we introduced MultiArch.
2014-09-05Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/acquire-item.cc configure.ac debian/changelog doc/apt-verbatim.ent doc/po/apt-doc.pot doc/po/de.po doc/po/es.po doc/po/fr.po doc/po/it.po doc/po/ja.po doc/po/pt.po po/ar.po po/ast.po po/bg.po po/bs.po po/ca.po po/cs.po po/cy.po po/da.po po/de.po po/dz.po po/el.po po/es.po po/eu.po po/fi.po po/fr.po po/gl.po po/hu.po po/it.po po/ja.po po/km.po po/ko.po po/ku.po po/lt.po po/mr.po po/nb.po po/ne.po po/nl.po po/nn.po po/pl.po po/pt.po po/pt_BR.po po/ro.po po/ru.po po/sk.po po/sl.po po/sv.po po/th.po po/tl.po po/tr.po po/uk.po po/vi.po po/zh_CN.po po/zh_TW.po test/integration/test-ubuntu-bug-346386-apt-get-update-paywall
2014-09-02* apt-pkg/deb/dpkgpm.cc:Michael Vogt
- update string matching for dpkg I/O errors. (LP: #1363257) - properly parse the dpkg status line so that package name is properly set and an apport report is created. Thanks to Anders Kaseorg for the patch. (LP: #1353171)
2014-06-18readd pkgPackageManager::Go() to not break APIMichael Vogt
2014-06-18Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: debian/changelog
2014-05-28Fix warning about uninitialized variableMichael Vogt
Reported-By: clang++ -Werror
2014-05-07Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/cachefilter.h apt-pkg/contrib/fileutl.cc apt-pkg/contrib/netrc.h apt-pkg/deb/debsrcrecords.cc apt-pkg/init.h apt-pkg/pkgcache.cc debian/apt.install.in debian/changelog
2014-04-30Only do openpty() if both stdin/stdout are terminalsMichael Vogt
Closes: 746434
2014-04-25reduce delta from ubuntuMichael Vogt
2014-04-01do not crash on SIGPIPE in pkgDPkgPM::RunScriptsWithPkgs()Michael Vogt
If a external command closes the PIPE unexpectedly, do not crash in pkgDPkgPM::RunScriptsWithPkgs but ignore the SIGPIPE.
2014-04-01Add new Debug::RunScripts optionMichael Vogt
This debug option will display all scripts that are run by apts RunScripts and RunScriptsWithPkgs helpers.
2014-03-22ensure proper teardown in dpkg error casesDavid Kalnischkies
We have to properly close our pseudo terminals even in error cases before we call post-invoke scripts. This is done now by breaking from the dpkg calling loop instead of copying the handling, which did it in the wrong order before. This also ensures that our state file is written in error cases to record autobit and co as this was forgotten before. Closes: 738969
2014-03-13cleanup headers and especially #includes everywhereDavid Kalnischkies
Beside being a bit cleaner it hopefully also resolves oddball problems I have with high levels of parallel jobs. Git-Dch: Ignore Reported-By: iwyu (include-what-you-use)
2014-03-13warning: unused parameter ‘foo’ [-Wunused-parameter]David Kalnischkies
Reported-By: gcc -Wunused-parameter Git-Dch: Ignore