summaryrefslogtreecommitdiff
path: root/apt-pkg/deb/dpkgpm.h
AgeCommit message (Collapse)Author
2019-02-26dpkgpm: Remove deprecated pkgDPkgPM::SendV2Pkgs()Julian Andres Klode
2019-02-26packagemanager: Remove deprecated functionsJulian Andres Klode
2018-05-07Remove obsolete RCS keywordsGuillem Jover
Prompted-by: Jakub Wilk <jwilk@debian.org>
2017-07-12Reformat and sort all includes with clang-formatJulian Andres Klode
This makes it easier to see which headers includes what. The changes were done by running git grep -l '#\s*include' \ | grep -E '.(cc|h)$' \ | xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/' To modify all include lines by adding a space, and then running ./git-clang-format.sh.
2016-11-24improve arch-unqualified dpkg-progress parsingDavid Kalnischkies
Our old idea was to look for the first package which would be "touched" and take this as the package dpkg is talking about, but that is incorrect in complicated situations like a package upgraded to/from multiple M-A:same siblings installed. As we us the progress report to decide what is still needed we have to be reasonabily right about the package dpkg is talking about, so we jump to quite a few loops to get it.
2016-08-10simulate all package manager actions explicitlyDavid Kalnischkies
If a planner lets actions to be figured out by dpkg in pending calls these actions aren't mentioned in a simulation. While that might be a good thing for debugging, it would be a change in behavior and especially if a planner avoids explicit removals could be confusing for users. As such we perform the same 'trick' as in the dpkg implementation by performing explicitly what would be done by the pending calls. To save us some work and avoid desyncs we perform a layer violation by using deb/ code in the generic simulation – and further we perform ugly dynamic_cast to avoid breaking the ABI for nothing; aptitude is the only other user of the simulation class according to codesearch.d.n and for that our little trick works. It just isn't working if you happen to extend pkgSimulate or otherwise manage to call the protected Go methods directly – which isn't very realistic/practical.
2016-08-10select remove/purge packages early on for dpkgDavid Kalnischkies
Telling dpkg early on that we are going to remove these packages later helps it with auto-deconfiguration decisions and its another area where a planner can ignore the nitty gritty details and let dpkg decide the course of action if there are no special requirements.
2016-03-07Fix several typosVeres Lajos
This effectively merges branch 'typofixes-vlajos-20150807' of github.com:vlajos/apt with the following commit: commit 13cacb3e2e2352ba701e769fc889e3344fabbf7e Author: Veres Lajos <vlajos@gmail.com> Date: Sun Aug 9 00:12:53 2015 +0100 typofix - https://github.com/vlajos/misspell_fixer It has been rebased for a better commit message.
2015-11-27add messages to our deprecation warnings in libaptDavid Kalnischkies
Git-Dch: Ignore
2015-08-10add c++11 override marker to overridden methodsDavid Kalnischkies
C++11 adds the 'override' specifier to mark that a method is overriding a base class method and error out if not. We hide it in the APT_OVERRIDE macro to ensure that we keep compiling in pre-c++11 standards. Reported-By: clang-modernize -add-override -override-macros Git-Dch: Ignore
2015-08-10make all d-pointer * const pointersDavid Kalnischkies
Doing this disables the implicit copy assignment operator (among others) which would cause hovac if used on the classes as it would just copy the pointer, not the data the d-pointer points to. For most of the classes we don't need a copy assignment operator anyway and in many classes it was broken before as many contain a pointer of some sort. Only for our Cacheset Container interfaces we define an explicit copy assignment operator which could later be implemented to copy the data from one d-pointer to the other if we need it. Git-Dch: Ignore
2014-09-30mark private methods as hiddenDavid Kalnischkies
We are the only possible users of private methods, so we are also the only users who can potentially export them via using them in inline methods. The point is: We don't need these symbols exported if we don't do this, so marking them as hidden removes some methods from the API without breaking anything as nobody could have used them. Git-Dch: Ignore
2014-09-23Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/acquire-item.cc apt-pkg/acquire-item.h apt-pkg/cachefilter.h configure.ac debian/changelog
2014-09-08rework PTY magic to fix stair-stepping on kfreebsdDavid Kalnischkies
A pty slave we have got from openpty can only be used for one dpkg child, if we give it to a second child on kfreebsd setting TIOCSCTTY fails causing the output to be stair-stepped from now on. By switching the code to creating a master and opening a new slave in the child for each child we can fix this glitch, so that at least the master remains stable. Closes: 759684
2014-06-18readd pkgPackageManager::Go() to not break APIMichael Vogt
2014-03-13cleanup headers and especially #includes everywhereDavid Kalnischkies
Beside being a bit cleaner it hopefully also resolves oddball problems I have with high levels of parallel jobs. Git-Dch: Ignore Reported-By: iwyu (include-what-you-use)
2014-03-13warning: unused parameter ‘foo’ [-Wunused-parameter]David Kalnischkies
Reported-By: gcc -Wunused-parameter Git-Dch: Ignore
2013-12-06Handle SIGWINCH in APT::Progress-Fancy=1Michael Vogt
2013-10-31move pty magic into its own functionsMichael Vogt
2013-10-31fix some more ABI issues, abicheck is happy nowMichael Vogt
2013-10-31restore ABI and prepare next ABI via #if (APT_PKG_MAJOR >= 4 && ↵Michael Vogt
APT_PKG_MINOR >= 13)
2013-10-31move pty stuff into its own functionMichael Vogt
2013-10-25extract getDpkgExecutable() and DPkgPM::BuildPackagesProgressMap() out of ↵Michael Vogt
the monster long pkgDPkgPM::Go()
2013-10-18cleanupMichael Vogt
2013-10-17Merge branch 'debian/sid' into feature/install-progress-refactorMichael Vogt
Conflicts: apt-pkg/deb/dpkgpm.cc
2013-10-17fix broken clean when apt was finished and ensure that terminal progress is ↵Michael Vogt
updated when a new dpkg-loop is entered in dpkgpm.cc
2013-10-13move the status-fd progress reporting out of the pkgDPkgPM class, at this ↵Michael Vogt
point, breaks ABI/API, lets see what we can do about this
2013-10-11first iteration of install progress refactorMichael Vogt
2013-10-07add -o DpkgPM::Progress-Fancy for better dpkg progress output on vt100+ ↵Michael Vogt
terminals
2013-07-11Add DPkgPM::Progress for terminal install progressMichael Vogt
2013-07-11Version 3 for DPkg::Pre-Install-Pkgs with MultiArch infoDavid Kalnischkies
Adds on top of Version 2 to all displayed version numbers the architecture as well as the MultiArch flag for consumption by the hooks. Most of the time the architecture will be the same for both versions displayed, but packages might change from "all" to "any" (or back) between versions so we can't display the architecture for packages. Pseudo-Format for Version 3: <name> <version> <arch> <m-a-flag> <compare> <version> <arch> <m-a-flag> Examples: stuff - - none < 1 amd64 none **CONFIGURE** libsame 1 i386 same < 2 i386 same **CONFIGURE** stuff 2 i386 none > 1 i386 none **CONFIGURE** libsame 2 i386 same > - - none **REMOVE** toolkit 1 all foreign > - - none **REMOVE** Closes: #712116
2011-12-13revert 2184.1.2: do not pollute namespace in headersDavid Kalnischkies
The breakage is just to big for now, so guard the change with #ifndef APT_8_CLEANER_HEADERS and be nice to library users
2011-09-19do not pollute namespace in the headers with using (Closes: #500198)David Kalnischkies
2011-09-14enable APT in unpack/configure ordering to handle loops as wellDavid Kalnischkies
as tight dependencies between immediate packages better enabling also the possibility to mark all packages as immediate (at least Closes: #353290, #540227, #559733, #621836, #639290)
2011-07-27SmartConfigure and SmartUnPack have got smarter! The full descriptions of ↵Christopher Baines
what they now do is in the apt-pkg/packagemanager.cc file. The short version is that they will both put the system in a state where there operation can be achived, this involves calling themselves and each other recursively. Because SmartConfigure can now configure a package and all its dependancies itself, there is no current need for DepAdd (at least in packagemanager.cc), SmartConfigure also performs the function of the short lived VerifyConfigure as it checks through all the dependancies before performing configuration. Another change is to use the ConfigureAll method in OrderInstall to clean up any packages left unconfigured during ImmConfigureAll. This is necessary to inprove the safety of ImmConfiguration and because of the new SIGINT functionality of dpkgpm.cc relies on no packages being left unconfigured between pairs of dpkg calls. While writing this commit log, I have realised that the SIGINT stuff is a prototype and not ready to be used yet as I have only tested it twice.
2011-01-27apt-pkg/deb/dpkgpm.{cc,h}: convert to use dpointersMichael Vogt
2010-06-09merged from lp:~donkult/apt/sidMichael Vogt
2010-06-09* merge the remaining Ubuntu change:Michael Vogt
- on gpg verification failure warn and restore the last known good state - on failure display the IP of the server (useful for servers that use round robin DNS) - support Original-Maintainer in RewritePackageOrder - enable cdrom autodetection via libudev by default - show messsage about Vcs in use when apt-get source is run for packages maintained in a Vcs - better support transitional packages with mark auto-installed. when the transitional package is in "oldlibs" the new package is not marked auto installed (same is true for section metapackages) - provide new "deb mirror://archive.foo/mirrors.list sid main" method expects a list of mirrors (generated on the server e.g. via geoip) and will use that, including cycle on failure - write apport crash file on package failure (disabled by default on debian until apport is available) - support mirror failure reporting (disabled by default on debian)
2010-05-27forward manual-installed bit on package disappearanceDavid Kalnischkies
2010-05-27* apt-pkg/deb/dpkgpm.cc:David Kalnischkies
- write Disappeared also to the history.log
2010-01-26Change history branch so that it does not break the Michael Vogt
apt ABI for the pkgPackageManager interface (can be reverted on the next ABI break)
2009-12-18* Merged from the mvo branchMichael Vogt
* merged from the lp:~mvo/apt/history branch * Fix apt-ftparchive(1) wrt description of the "-o" option. Thanks to Dann Frazier for the patch. Closes: #273100 * po/LINGUAS. Re-disable Hebrew. Closes: #534992 * po/LINGUAS. Enable Asturian and Lithuanian * Fix typo in apt-cache.8.xml: nessasarily * Fix "with with" in apt-get.8.xml * Fix some of the typos mentioned by the german team Closes: #479997 * Polish translation update by Wiktor Wandachowicz Closes: #548571 * German translation update by Holger Wansing Closes: #551534 * Italian translation update by Milo Casagrande Closes: #555797 * Simplified Chinese translation update by Aron Xu Closes: #558737 * Slovak translation update by Ivan Masár Closes: #559277 * apt-pkg/packagemanager.cc: - add output about pre-depends configuring when debug::pkgPackageManager is used * methods/https.cc: - fix incorrect use of CURLOPT_TIMEOUT, closes: #497983, LP: #354972 thanks to Brian Thomason for the patch * merge lp:~mvo/apt/netrc branch, this adds support for a /etc/apt/auth.conf that can be used to store username/passwords in a "netrc" style file (with the extension that it supports "/" in a machine definition). Based on the maemo git branch (Closes: #518473) (thanks also to Jussi Hakala and Julian Andres Klode) * apt-pkg/deb/dpkgpm.cc: - add "purge" to list of known actions * apt-pkg/init.h: - add compatibility with old ABI name until the next ABI break * merge segfault fix from Mario Sanchez Prada, many thanks (closes: #561109) * apt-pkg/depcache.cc, apt-pkg/indexcopy.cc: - typo fix (LP: #462328) * cmdline/apt-key: - Emit a warning if removed keys keyring is missing and skip associated checks (LP: #218971) * apt-pkg/packagemanager.cc: - better debug output for ImmediateAdd with depth and why - improve the message shown for failing immediate configuration * doc/guide.it.sgml: moved to doc/it/guide.it.sgml * doc/po4a.conf: activate translation of guide.sgml and offline.sgml * doc/apt.conf.5.xml: - provide a few more details about APT::Immediate-Configure - briefly document the behaviour of the new https options * doc/sources.list.5.xml: - add note about additional apt-transport-methods * doc/apt-mark.8.xml: - correct showauto synopsis, thanks Andrew Schulman (Closes: #551440) * cmdline/apt-get.cc: - source should display his final pkg pick (Closes: #249383, #550952) - source doesn't need the complete version for match (Closes: #245250) - source ignores versions/releases if not available (Closes: #377424) - only warn if (free) space overflows (Closes: #522238) - add --debian-only as alias for --diff-only * methods/connect.cc: - display also strerror of "wicked" getaddrinfo errors - add AI_ADDRCONFIG to ai_flags as suggested by Aurelien Jarno in response to Bernhard R. Link, thanks! (Closes: #505020) * buildlib/configure.mak, buildlib/config.{sub,guess}: - remove (outdated) config.{sub,guess} and use the ones provided by the new added build-dependency autotools-dev instead * configure.in, buildlib/{xml,yodl,sgml}_manpage.mak: - remove the now obsolete manpage buildsystems * doc/{pl,pt_BR,es,it}/*.{sgml,xml}: - convert all remaining translation to the po4a system * debian/control: - drop build-dependency on docbook-utils and xmlto - add build-dependency on autotools-dev - bump policy to 3.8.3 as we have no outdated manpages anymore * debian/NEWS: - fix a typo in 0.7.24: Allready -> Already (Closes: #557674) * ftparchive/writer.{cc,h}: - add APT::FTPArchive::LongDescription to be able to disable them * apt-pkg/deb/debsrcrecords.cc: - use "diff" filetype for .debian.tar.* files (Closes: #554898) * methods/rred.cc: - rewrite to be able to handle even big patch files - adopt optional mmap+iovec patch from Morten Hustveit (Closes: #463354) which should speed up a bit. Thanks! * methods/http{,s}.cc - add config setting for User-Agent to the Acquire group, thanks Timothy J. Miller! (Closes: #355782) - add https options which default to http ones (Closes: #557085) * debian/apt.cron.daily: - check cache size even if we do nothing else otherwise, thanks Francesco Poli for patch(s) and patience! (Closes: #459344) * ftparchive/*: - fix a few typos in strings, comments and manpage, thanks Karl Goetz! (Closes: #558757) * cmdline/apt-mark: - print an error if a new state file can't be created (Closes: #521289) and - exit nicely if python-apt is not installed (Closes: #521284) * doc/de: German translation of manpages (Closes: #552606) * doc/ various manpages: - correct various errors, typos and oddities (Closes: #552535) * doc/apt-secure.8.xml: - replace literal with emphasis tags in Archive configuration * doc/apt-ftparchive.1.xml: - remove informalexample tag which hides the programlisting * doc/apt-get.8.xml: - change equivalent "for" to "to the" (purge command) - clarify --fix-broken sentence about specifying packages * apt-pkg/contib/strutl.h - Avoid extra inner copy in APT_MKSTRCMP and APT_MKSTRCMP2. * build infrastructure: - Bumped libapt version, excluded eglibc from SONAME. (Closes: #448249) * doc/apt.conf.5.xml: - Deprecate unquoted values, string concatenation and explain what should not be written inside a value (quotes,backslash). - Restrict option names to alphanumerical characters and "/-:._+". - Deprecate #include, we have apt.conf.d nowadays which should be sufficient. * ftparchive/apt-ftparchive.cc: - Call setlocale() so translations are actually used. * debian/apt.conf.autoremove: - Add kfreebsd-image-* to the list (Closes: #558803)
2009-12-18apt-pkg/deb/dpkgpm.{cc,h}: refactor writing of the history tag, add ","Michael Vogt
2009-12-18add /var/log/apt/history.log fileMichael Vogt
2009-09-23merged from debianMichael Vogt
2009-09-15Add even more config options and try to handle configuration problemsDavid Kalnischkies
arising if we upgrade essential or predependencies which need to be configured before even unpacking packages depending on them.
2009-09-13add and document experimental options to make aggressiveDavid Kalnischkies
use of dpkg's trigger and configuration handling (Closes: #473461) Add NoTriggers option to add --no-triggers to all dpkg calls, NoConfiguration to prevent apt from trying to configure packages - dpkg should handle this in the last ConfigurePending call. This options are for now deactivated as they require more testing in real world situations, but the plan is to enable them in the near future if anything works well.
2009-07-30merged from debianMichael Vogt
2008-11-24merged from debian-sidMichael Vogt
2008-09-25Restore the apt ABI.Daniel Burrows
The problem was that the size of pkgDpkgPM and its member offsets changed because a map giving the names of the trigger states was inserted into the middle of the structure. I fixed it by using a statically allocated array instead. This changes the procedure for looking up a string to a linear search, which should be fine (or even faster than before) since there are only 4 state strings. If it becomes a problem, sorting the array by key will allow us to use std::equal_range(), but I would advise against this unless it's really necessary, since sooner or later someone will forget to maintain the sort order.