| Age | Commit message (Collapse) | Author |
|---|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Closes: 769609
|
|
We were already considering these cases, but the code was flawed, so
that packages changing architectures are incorrectly handled and hence
the wrong architecture is used to call dpkg with, so that dpkg says the
package isn't installed (which it isn't for the requested architecture).
Closes: 770898
|
|
We run dpkg on its own pty, so we can log its output and have our own
output around it (like the progress bar), while also allowing debconf
and configfile prompts to happen.
In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to
constantly reopening the slave for kfreebsd. This has the sideeffect
though that in some cases slave and master will lose their connection on
linux, so that no output is passed along anymore. We fix this by having
always an fd referencing the slave open (linux), but we don't use it
(kfreebsd).
Failing to get our PTY up and running has many (bad) consequences
including (not limited to, nor all at ones or in any case) garbled ouput,
no output, no logging, a (partial) mixture of the previous items, …
This commit is therefore also reshuffling quiet a bit of the creation
code to get especially the output part up and running on linux and the
logging for kfreebsd.
Note that the testcase tries to cover some cases, but this is an
interactivity issue so only interactive usage can really be a good test.
Closes: 765687
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
Git-Dch: Ignore
|
|
We have a bunch of classes which are of no use for the outside world,
but were still exported and so needed to preserve ABI/API. Marking them
as hidden to not export them any longer is a big API break in theory,
but in practice nobody is using them – as if they would its a bug.
|
|
We can't add a new virtual method without breaking the ABI, but we can
freely add new methods, so for older ABIs we just implement this method
with a dynamic_cast, so that clients can be more ignorant about the API
here and especially don't need to pull a very dirty trick by assuming
internal knowledge (like apt-get did here).
|
|
Git-Dch: Ignore
|
|
For compatibility we use/provide and fill quiet some deprecated methods
and fields, which subsequently earns us a warning for using them. These
warnings therefore have to be disabled for these codeparts and that is
what this change does now in a slightly more elegant way.
Git-Dch: Ignore
|
|
debian/experimental
|
|
Conflicts:
debian/changelog
|
|
|
|
Handle Translation-* files exactly like Packages files (with the
expection that it is ok if a download of them fails). Remove all
"guessing" on apts side. This will elimimnate a bunch of errors
releated to captive portals and similar. Its also more correct
and removes another potential attack vector.
|
|
Git-Dch: ignore
|
|
Instead of hardcoding Dpkg::MaxArgBytes find out about it using
the sysconf(_SC_ARG_MAX) call.
|
|
|
|
I am pretty sure I did that before committing broken stuff…
Git-Dch: Ignore
|
|
Do not require a special flag to be present to update trusted=yes
sources as this flag in the sources.list is obviously special enough.
Note that this is just disabling the error message, the user will still
be warned about all the (possible) failures the repository generated, it
is just triggering the acceptance of the warnings on a source-by-source
level.
Similarily, the trusted=no flag doesn't require the user to pass
additional flags to update, if the repository looks fine in the view of
apt it will update just fine. The unauthenticated warnings will "just" be
presented then the data is used.
In case you wonder: Both was the behavior in previous versions, too.
|
|
Reimplementing an inline method is opening a can of worms we don't want
to open if we ever want to us a d-pointer in those classes, so we do the
only thing which can save us from hell: move the destructors into the cc
sources and we are good.
Technically not an ABI break as the methods inline or not do the same
(nothing), so a program compiled against the old version still works
with the new version (beside that this version is still in experimental,
so nothing really has been build against this library anyway).
Git-Dch: Ignore
|
|
Remove long obsolete (hold, hold-reinstreq, removal-failed) or just
wrong (post-inst-failed vs postinst-failed) values, that have been
autoconverted by dpkg at run-time to their new equivalents, so there
should not be any such instance in any recent system (removal-failed
since dpkg 1.1.4 in Apr 1996, hold and hold-reinstreq since dpkg
1.2.0 in May 1996). dpkg even stopped doing the mapping in 1.15.4
and 1.15.8 respectively.
At the same time sort the list in the same order as they appear in
the dpkg code.
|
|
feature/acq-trans
Conflicts:
apt-pkg/acquire-item.cc
|
|
|
|
aptitude has a define for VERSION, so to not generate a FTBFS we just
rename our enum element to a slightly less generic name.
Git-Dch: Ignore
|
|
We are the only possible users of private methods, so we are also the
only users who can potentially export them via using them in inline
methods. The point is: We don't need these symbols exported if we don't
do this, so marking them as hidden removes some methods from the API
without breaking anything as nobody could have used them.
Git-Dch: Ignore
|
|
feature/acq-trans
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
methods/gpgv.cc
|
|
Conflicts:
apt-pkg/acquire-item.cc
|
|
Accessing the package records to acquire this information is pretty
costly, so that information wasn't used so far in many places. The most
noticeable user by far is EDSP at the moment, but there are ideas to
change that which this commit tries to enable.
|
|
Strings like Section names or architectures are needed vary often.
Instead of writing them each time we need them, we deploy sharing for
these special strings. Until now, this was done with a linked list of
strings in which we would search, which was stored in the cache.
It turns out we can do this just as well in memory as well with a bunch
of std::map's.
In memory means here that it isn't available anymore if we have a partly
invalid cache, but that isn't much of a problem in practice as the
status file is compared to the other files we parse very small and includes
mostly duplicates, so the space we would gain by storing is more or less
equal to the size of the stored linked list…
|
|
feature/acq-trans
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
methods/copy.cc
test/integration/test-hashsum-verification
|
|
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/cachefilter.h
configure.ac
debian/changelog
|
|
|
|
|
|
A pty slave we have got from openpty can only be used for one dpkg
child, if we give it to a second child on kfreebsd setting TIOCSCTTY
fails causing the output to be stair-stepped from now on.
By switching the code to creating a master and opening a new slave in
the child for each child we can fix this glitch, so that at least the
master remains stable.
Closes: 759684
|
|
APT treats upgrades like installs and dpkg is very similar in this, but
prints still a slightly different processing message indicating that it
is really an upgrade which we hadn't parsed so far, but this wasn't
really visible as we quickly moved on to a 'known' state.
More problematic was the reinstall case as apt hadn't recognized this
for the package name detection, so that reinstalls had no progress since
we introduced MultiArch.
|
|
feature/acq-trans
|
|
Conflicts:
apt-pkg/acquire-item.cc
configure.ac
debian/changelog
doc/apt-verbatim.ent
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pt.po
po/ar.po
po/ast.po
po/bg.po
po/bs.po
po/ca.po
po/cs.po
po/cy.po
po/da.po
po/de.po
po/dz.po
po/el.po
po/es.po
po/eu.po
po/fi.po
po/fr.po
po/gl.po
po/hu.po
po/it.po
po/ja.po
po/km.po
po/ko.po
po/ku.po
po/lt.po
po/mr.po
po/nb.po
po/ne.po
po/nl.po
po/nn.po
po/pl.po
po/pt.po
po/pt_BR.po
po/ro.po
po/ru.po
po/sk.po
po/sl.po
po/sv.po
po/th.po
po/tl.po
po/tr.po
po/uk.po
po/vi.po
po/zh_CN.po
po/zh_TW.po
test/integration/test-ubuntu-bug-346386-apt-get-update-paywall
|
|
- update string matching for dpkg I/O errors. (LP: #1363257)
- properly parse the dpkg status line so that package name is properly set
and an apport report is created. Thanks to Anders Kaseorg for the patch.
(LP: #1353171)
|
|
APT supported versioned provides for a long while in an attempt to get
it working with rpm. While this support is old, we can be relatively
sure that it works as versioned provides are used internally to make
Multi-Arch:foreign work.
Previous versions of apt will print a warning indicating that the
versioned provides is ignored, so that something which "Provides: foo (=
2)" doesn't provide anything.
Note that dpkg does allow only a equals-relation in the provides line
as anything else is deemed too complex. apt doesn't support anything
else either and such a support would require potentially big changes.
Closes: 758153
|
|
Seems this was missed somehow.
Closes: #759099
|
|
Seems this was missed somehow.
Closes: #759099
|
|
|
|
The old way of handling this was that pkgAcqMetaIndex was responsible
to check/move both Release and Release.gpg in place. This breaks
the assumption of the transaction that each pkgAcquire::Item has
a single File that its responsible for.
|
|
CLoses: #752327
|
|
Conflicts:
apt-pkg/deb/deblistparser.cc
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pl.po
doc/po/pt.po
doc/po/pt_BR.po
po/da.po
po/mr.po
po/vi.po
|
|
A call to UniqFindTagWrite can trigger the need for a bigger mmap, which
is usually done by moving it, but with this move all pointers into it
become invalid (and have to be remapped). The compiler calculates the
pointer before the execution of the call though, so it tries to store
the returned value at the old location, resulting in a segfault.
We solve this by use of a temprorary variable as we did in the other
instances of this problem before.
Closes: #753941
|
|
|
|
A version belongs to a section and has hence a section member of its
own. A package on the other hand can have multiple versions from
different sections. This was "solved" by using the section which was
parsed first as order of sources.list defines, but that is obviously a
horribly unpredictable thing.
We therefore directly remove this struct member to free some space and
mark the access method as deprecated, which is told to return the
section of the 'newest' known version, which is at least predictable,
but possible not what it returned before – but nobody knows.
Users are way better of with the Section() as returned by the version
they are dealing with. It is likely the same for all versions of a
package, but in the few cases it isn't, it is important (like packages
moving from main/* to contrib/* or into oldlibs …).
|
|
We had a wild mixture of (unsigned) int, long and long long here without
much sense, so this commit adds a few typedefs to get some sense in the
typesystem and ensures that a ID isn't sometimes computed as int, stored
as long and compared with a long long… as this could potentially bite us
later on as the size of the archive only increases over time.
|
|
Conflicts:
debian/changelog
|
