| Age | Commit message (Collapse) | Author |
|---|
|
While we don't want these error messages on our usual stack, we can use
our usual infrastructure to generate an error message with all the usual
bells like errno and strerror attached.
Git-Dch: Ignore
|
|
If this code is run as non-root we are in a special situation (e.g. in
our testcases) where it is obvious that we can't enforce user/group on
any file, so skip this code altogether instead of bugging users with
an error message – which we also switch to a warning as a failure to
open the file is "just" a warning, so the 'wrong' owner shouldn't be
that much of an issue.
The file is still handled with chmod, so all the security we can enforce
is still enforced of course, which also gets a warning if it fails.
Git-Dch: Ignore
|
|
|
|
The handwritten parsing here was mostly done as we couldn't trust the
Release file we got, but nowadays we are sure that the Release file is
valid and contains just a single section we want it to include.
Beside reducing code it also fixes a bug: Fieldnames in deb822 formatted
files are case-insensitive and pkgTagFile does it correctly, but this
selfbuilt stuff here didn't.
|
|
|
|
|
|
|
|
The code incorrectly skips printing of current version information,
if the package has no current version (for APT, but for dpkg as it is
the case for packages which are removed but not purged) by using an
unintended "else if" rather than an "if".
Closes: 717006
|
|
Default is to acquire all architectures from APT::Architectures which
can be changed by arch=, but this isn't very flexible if you want
"mostly" the default as you have to hardcode the architectures then,
so arch-= and arch+= can be used to add/remove architectures from the
default set.
On a machine with 'amd64' and 'i386' configured the lines:
deb [arch+=armel] http://example.org/debian wheezy rocks
deb [arch-=amd64] http://example.org/debian jessie rocks
will result in the download of:
wheezy Packages for 'amd64', 'i386' and 'armel'
jessie Packages for 'i386'
|
|
Adds on top of Version 2 to all displayed version numbers the
architecture as well as the MultiArch flag for consumption by the hooks.
Most of the time the architecture will be the same for both versions
displayed, but packages might change from "all" to "any" (or back)
between versions so we can't display the architecture for packages.
Pseudo-Format for Version 3:
<name> <version> <arch> <m-a-flag> <compare> <version> <arch> <m-a-flag>
Examples:
stuff - - none < 1 amd64 none **CONFIGURE**
libsame 1 i386 same < 2 i386 same **CONFIGURE**
stuff 2 i386 none > 1 i386 none **CONFIGURE**
libsame 2 i386 same > - - none **REMOVE**
toolkit 1 all foreign > - - none **REMOVE**
Closes: #712116
|
|
do not blindly assume that all packages stanzas have a "Description:"
field in 'apt-cache show' as well as in the cache creation itself.
We instead assume now that if the stanza has a Description, it will not
be the first field as we look out for "\nDescription" to take care of
MD5sum as well as (maybe ignored) translated Descriptions embedded in
the package stanza.
Closes: #712435
|
|
|
|
to save some space and allow quick comparisions later on
|
|
|
|
|
|
- add a string-equal shortcut for equal version comparisions
|
|
|
|
apt-pkg/deb/deblistparser.cc:
- use OpenMaybeClearSignedFile to be free from detecting and
skipping clearsigning metadata in dsc and Release files
We can't write a "clean" file to disk as not all acquire methods copy
Release files before checking them (e.g. cdrom), so this reverts recombining,
but uses the method we use for dsc files also in the two places we
deal with Release files
|
|
into data and signatures, pass it to gpgv for verification and
recombines it after that in a known-good way without unsigned blocks
and whitespaces resulting usually in more or less the same file as
before, but later code can be sure about the format
* apt-pkg/deb/debmetaindex.cc:
- reenable InRelease by default
|
|
- CVE-2013-1051
* apt-pkg/deb/debmetaindex.cc,
test/integration/test-bug-595691-empty-and-broken-archive-files,
test/integration/test-releasefile-verification:
- disable InRelease downloading until the verification issue is
fixed, thanks to Ansgar Burchardt for finding the flaw
|
|
|
|
Closes: #697577
|
|
|
|
by introducing a pseudo-architecture 'none' so that the small group of
users with these packages can get right of them without introducing too
much hassle for other users (Closes: #686346)
|
|
|
|
- negative dependencies need to apply to all architectures,
but those with a specific architecture only apply to this one
|
|
change at the time of writing the strings, so first store it temporary
and then save the index in the (possibily new) pointer location
|
|
- use PackageArchitectureMatchesSpecification filter
* apt-pkg/cachefilter.cc:
- add PackageArchitectureMatchesSpecification (Closes: #672603)
|
|
- ensure that mixed positive/negative architecture wildcards
are handled in the same way as dpkg handles them
|
|
- add support for arch-specific qualifiers in dependencies
|
|
- set pkgCacheGen::Essential to "all" again (Closes: #675449)
* apt-pkg/algorithms.cc:
- force install only for one essential package out of a group
|
|
|
|
- check length and containing chars for a given description md5sum
|
|
|
|
|
|
|
|
- only treat the native apt as essential by default
|
|
|
|
- do not crash if (*I).Pkg is NULL (LP: #939867)
|
|
|
|
- check return of writev() as gcc recommends
* methods/mirror.cc:
- check return of chdir() as gcc recommends
* apt-pkg/deb/dpkgpm.cc:
- check return of write() a gcc recommends
* apt-inst/deb/debfile.cc:
- check return of chdir() as gcc recommends
* apt-inst/deb/dpkgdb.cc:
- check return of chdir() as gcc recommends
|
|
* apt-pkg/packagemanager.cc:
- fix bug in predepends handling - ensure that packages that needs
unpackaging are unpacked before they are configured (LP: #927993)
[ Julian Andres Klode ]
* apt-pkg/deb/deblistparser.cc:
- Set the Essential flag on APT instead of only Important
* apt-pkg/packagemanager.cc:
- Do not use immediate configuration for packages with the Important flag
* Treat the Important flag like the Essential flag with those differences:
- No Immediate configuration (see above)
- Not automatically installed during dist-upgrade
- No higher score for installation ordering
|
|
- Set the Essential flag on APT instead of only Important
|
|
|
|
initialized in the constructor." messages (no functional change)
|
|
dpkg transaction instead of ignoring it completely
|
|
- drop support for i18n/Index file (introduced in 0.8.11) and use
the Release file instead to get the Translations (Closes: #649314)
* ftparchive/writer.cc:
- add 'Translation-*' to the default patterns
i18n/Index was never used outside debian - and even here it isn't used
consistently as only 'main' has such a file. As the Release file now
includes the Translation-* files we therefore drop support for i18n/Index.
A version supporting it was never part of a debian release and still
supporting it would mean that we get 99% of the time a 404 as response
to the request anyway and confuse archive maintainers who want to
provide all files APT tries to acquire.
|
|
with this name is not installed (Closes: #619646)
|
|
|
|
- fix crash when a package is in removed but residual config state
(LP: #923807)
|
