| Age | Commit message (Collapse) | Author |
|---|
|
Leading or trailing newlines can be confusing for our parser as it
expects two newlines to start/stop a new stanza. To solve this the lines
we wanna add are printed first, ignore any leading newlines and then add
the stanza as provided by dpkg-deb with or without trailing newlines as
the parser will look at the first stanza only anyway and removing
trailing newlines is considerably harder to do.
Closes: 802553
|
|
Based on a discussion with Niels Thykier who asked for Contents-all this
implements apt trying for all architecture dependent files to get a file
for the architecture all, which is treated internally now as an official
architecture which is always around (like native). This way arch:all
data can be shared instead of duplicated for each architecture requiring
the user to download the same information again and again.
There is one problem however: In Debian there is already a binary-all/
Packages file, but the binary-any files still include arch:all packages,
so that downloading this file now would be a waste of time, bandwidth
and diskspace. We therefore need a way to decide if it makes sense to
download the all file for Packages in Debian or not. The obvious answer
would be a special flag in the Release file indicating this, which would
need to default to 'no' and every reasonable repository would override
it to 'yes' in a few years time, but the flag would be there "forever".
Looking closer at a Release file we see the field "Architectures", which
doesn't include 'all' at the moment. With the idea outlined above that
'all' is a "proper" architecture now, we interpret this field as being
authoritative in declaring which architectures are supported by this
repository. If it says 'all', apt will try to get all, if not it will be
skipped. This gives us another interesting feature: If I configure a
source to download armel and mips, but it declares it supports only
armel apt will now print a notice saying as much. Previously this was a
very cryptic failure. If on the other hand the repository supports mips,
too, but for some reason doesn't ship mips packages at the moment, this
'missing' file is silently ignored (= that is the same as the repository
including an empty file).
The Architectures field isn't mandatory through, so if it isn't there,
we assume that every architecture is supported by this repository, which
skips the arch:all if not listed in the release file.
|
|
This was discussed a while ago on #debian-apt and now that I see myself
making this mistake lets bite the bullet and fix it in the easy way out
version: Using a new name which fits with a similar named setter and
deprecate the old method instead of 'hostily' changing API.
Closes: #803471
|
|
Showing just "Get: [1234 B]" looks very strange, so we now print the
filename and as usual the package name, version and architecture.
|
|
We had this code lying around in apt-mark for a while now, but other
frontends need this (and similar) functionality as well, so its high
time that we provide a public interface in libapt for this stuff.
|
|
We have a few places and there will be a few more still where we have to
call dpkg to detect/set certain features or settings. Centralizing the
calling infrastructure now seems like a good idea before we add another.
|
|
|
|
Some codepaths need to check if the system (in our case usually dpkg)
supports MultiArch or not. We had copy-pasted the check so far into
these paths, but having it as a system check is better for reusability.
|
|
The former is not thread-safe, whereas the latter is.
Gbp-Dch: ignore
|
|
This function only exists on a limited number of platforms, so
we add a configure check to make sure it exists.
Gbp-Dch: ignore
|
|
ctime() is not thread-safe, ctime_r() is.
Gbp-Dch: ignore
|
|
More safety, less writeable memory.
|
|
This changes the semantics of the option (which is renamed too) to be a
yes/no value with the special additional value "force" as this allows
by-hash to be disabled even if the repository indicates it would be
supported and is more in line with our other yes/no options like pdiff
which disable themselves if no support can be detected.
The feature wasn't documented so far and hasn't reached a (un)stable
release yet, so changing it without trying too hard to keep
compatibility seems okay.
|
|
Our error reporting is historically grown into some kind of mess.
A while ago I implemented stacking for the global error which is used in
this commit now to wrap calls to functions which do not report (all)
errors via return, so that only failures in those calls cause a failure
to propergate down the chain rather than failing if anything
(potentially totally unrelated) has failed at some point in the past.
This way we can avoid stopping the entire acquire process just because a
single source produced an error for example. It also means that after
the acquire process the cache is generated – even if the acquire
process had failures – as we still have the old good data around we can and
should generate a cache for (again).
There are probably more instances of this hiding, but all these looked
like the easiest to work with and fix with reasonable (aka net-positive)
effects.
|
|
How the Multi-Arch field and pkg:<arch> dependencies interact was
discussed at DebConf15 in the "MultiArch BoF". dpkg and apt (among other
tools like dose) had a different interpretation in certain scenarios
which we resolved by agreeing on dpkg view – and this commit realizes
this agreement in code.
As was the case so far libapt sticks to the idea of trying to hide
MultiArch as much as possible from individual frontends and instead
translates it to good old SingleArch. There are certainly situations
which can be improved in frontends if they know that MultiArch is upon
them, but these are improvements – not necessary changes needed
to unbreak a frontend.
The implementation idea is simple: If we parse a dependency on foo:amd64
the dependency is formed on a package 'foo:amd64' of arch 'any'. This
package is provided by package 'foo' of arch 'amd64', but not by 'foo'
of arch 'i386'. Both of those foo packages provide each other through
(assuming foo is M-A:foreign) to allow a dependency on 'foo' to be
satisfied by either foo of amd64 or i386. Packages can also declare to
provide 'foo:amd64' which is translated to providing 'foo:amd64:any' as
well.
This indirection over provides was chosen as the alternative would be to
teach dependency resolvers how to deal with architecture specific
dependencies – which violates the design idea of avoiding resolver
changes, especially as architecture-specific dependencies are a
cornercase with quite a few subtil rules. Handling it all over versioned
provides as we already did for M-A in general seems much simpler as it
just works for them.
This switch to :any has actually a "surprising" benefit as well: Even
frontends showing a package name via .Name() [which doesn't show the
architecture] will display the "architecture" for dependencies in which
it was explicitely requested, while we will not show the 'strange' :any
arch in FullName(true) [= pretty-print] either. Before you had to
specialcase these and by default you wouldn't get these details shown.
The only identifiable disadvantage is that this complicates error
reporting and handling. apt-get's ShowBroken has existing problems with
virtual packages [it just shows the name without any reason], so that
has to be worked on eventually. The other case is that detecting if a
package is completely unknown or if it was at least referenced somewhere
needs to acount for this "split" – not that it makes a practical
difference which error is shown… but its one of the improvements
possible.
|
|
We parse all architectures we encounter recently, which means we also
parse packages from architectures which are neither native nor foreign,
but still came onto the system somehow (usually via heavy force).
|
|
Previously we had python:any:amd64, python:any:i386, … in the cache and
the dependencies of an amd64 package would be on python:any:amd64, of an
i386 on python:any:i386 and so on. That seems like a relatively
pointless endeavor given that they will all be provided by the same
packages and therefore also a waste of space.
Git-Dch: Ignore
|
|
Reported-By: gcc
Git-Dch: Ignore
|
|
Multiple targets downloading the same file is bad™ as it leads us to all
sorts of problems like the acquire system breaking or simply a problem
of which settings to use for them. Beside that this is most likely a
mistake and silently ignoring it doesn't help the user realizing his
mistake…
On the other hand, we have 'duplicates' which are 'created' by how we
create indextargets, so we have to prevent those from being created to
but do not emit a warning for them as this is an implementation detail.
And then, there is the absolute and most likely user mistake: Having the
same target(s) activated in multiple entries.
|
|
|
|
Some targets like Contents-udeb are special-needs targets. Shipping the
configuration snippet for them is okay, but they shouldn't be downloaded
by default. Forcing the user to enable targets by uncommenting targets
is wrong and this would still not really solve the problem completely as
even if you want to download some -udebs it will probably not be for all
sources you have enabled, so having the possibility of disabling a
target by default, but giving the user the option to enable it on a
per-source entry basis is better.
|
|
Nobody knows what makes the 'unable to optimize loop' warning to appear
in the sourceslist minus-options parsing, especially if we use a foreach
loop, but we can replace it with some nice c++11 algorithm+lambda usage,
which also helps in making even clearer what happens here.
And as this would be a lonely change, lets do it for a few more loops as
well where I might or might not have seen the warning at some point in
time, too.
Git-Dch: Ignore
|
|
Some additional files like 'Contents' are very big and should therefore
kept compressed on the disk, which apt-file did in the past. It also
implemented pdiff patching of these files by un- and recompressing these
files on-the-fly, with this commit we can do the same – but we can do
this in both pdiff patching styles (client and server merging) and
secured by hashes.
Hashes are in so far slightly complicated as we can't compare the hashes
of the compressed files as we might compress them differently than the
server would (different compressor versions, options, …), so we must
compare the hashes of the uncompressed content.
While this commit has changes in public headers, the classes it changes
are marked as hidden, so nobody can use them directly, which means the
ABI break is internal only.
|
|
Disabling pdiffs can be useful occasionally, like if you have a fast
local mirror where the download doesn't matter, but still want to use it
for non-local mirrors. Also, some users might prefer it to only use it
for very big indextargets like Contents.
|
|
This could allow an attacker to mark a package as installed in a
remote package index, as long as the package was not listed in
the dpkg status file.
This way, an attacker could force the installation of a package
during a dist-upgrade, by providing two packages in an index,
an older marked as installed, and a newer - apt would "upgrade"
to the newer version.
|
|
While Target{,-Add,-Remove} is available for configuring IndexTargets
already, allow Targets to be mentioned explicitely as yes/no options as
well, so that the Target 'Contents' can be disabled via 'Contents: no'
as well as 'Target-Remove: Contents'.
|
|
Sometimes too much refactoring can have bad effects.
Thanks: Niels Thykier for reporting on IRC
Git-Dch: Ignore
|
|
Git-Dch: ignore
|
|
|
|
Support for that variable was removed in dpkg in 1.15.6, in commit
6f037003e8b96878b485efb7cbd1f846e3bf4e97.
Closes: #765366
|
|
Gbp-Dch: ignore
Reported-By: g++ -Wsuggest-override
Thanks: g++ -Wsuggest-override
|
|
Git-Dch: Ignore
|
|
We archieve the same without the special handling now, so drop this code.
Makes supporting this abdomination a little longer bearable as well.
Git-Dch: Ignore
|
|
Now that we can dynamically create dependencies and provides as needed
rather than requiring to know with which architectures we will deal
before running we can allow the listparser to parse all records rather
than skipping records of "unknown" architectures.
This can e.g. happen if a user has foreign architecture packages in his
status file without dpkg knowing about this architecture (or apt
configured in this way).
A sideeffect is that now arch:all packages are (correctly) recorded as
available from any Packages file, not just from the native one – which
has its downsides for the resolver as mixed-arch source packages can
appear in different architectures at different times, but that is the
problem of the resolver and dealing with it in the parser is at best a
hack (and also depends on a helpful repository).
Another sideeffect is that his allows :none packages to appear in
Packages files again as we don't do any kind of checks now, but given
that they aren't really supported (anymore) by anyone we can live with
that.
|
|
Trade deduplication of code for a bunch of new virtuals, so it is
actually visible how the different indexes behave cleaning up the
interface at large in the process.
Git-Dch: Ignore
|
|
Sources are usually defined in sources.list (and co) and are pretty
stable, but once in a while a frontend might want to add an additional
"source" like a local .deb file to install this package (No support for
'real' sources being added this way as this is a multistep process).
We had a hack in place to allow apt-get and apt to pull this of for a
short while now, but other frontends are either left in the cold by this
and/or the code for it looks dirty with FIXMEs plastering it and has on
top of this also some problems (like including these 'volatile' sources
in the srcpkgcache.bin file).
So the biggest part in this commit is actually the rewrite of the cache
generation as it is now potentially a three step process. The biggest
problem with adding support now through is that this makes a bunch of
previously mostly unusable by externs and therefore hidden classes
public, so a bit of further tuneing on this now public API is in order…
|
|
Now that we deal with provides in a more dynamic fashion the last
remaining problem is explicit dependencies like 'Conflicts: foo' which
have to apply to all architectures, but creating them all at the same
time requires us to know all architectures ending up in the cache which
isn't needed to be the same set as all foreign architectures.
The effect is visible already now through as this prevents the creation
of a bunch of virtual packages for arch:all packages and as such also
many dependencies, just not very visible if you don't look at the stats…
Git-Dch Ignore
|
|
Expecting the worst is easy to code, but has its disadvantages e.g.
by creating package structures which otherwise would have never
existed. By creating the provides instead at the time a package
structure is added we are well prepared for the introduction of partial
architectures, massive amounts of M-A:foreign (and :allowed) and co as
far as provides are concerned at least. We have something relatively
similar for dependencies already.
Many tests are added for both M-A states and the code cleaned to
properly support implicit provides for foreign architectures and
architectures we 'just' happen to parse.
Git-Dch: Ignore
|
|
Before MultiArch implicits weren't a thing, so they were hidden by
default by definition. Adding them for MultiArch solved many problems,
but having no reliable way of detecting which dependency (and provides)
is implicit or not causes problems everytime we want to output
dependencies without confusing our observers with unneeded
implementation details.
The really notworthy point here is actually that we keep now a better
record of how a dependency came to be so that we can later reason about
it more easily, but that is hidden so deep down in the library internals
that change is more the problems it solves than the change itself.
|
|
We aren't and we will not be really compatible again with the previous
stable abi, so lets drop these markers (which never made it into a
released version) for good as they have outlived their intend already.
Git-Dch: Ignore
|
|
DepCache functions are called a lot, so if we can squeeze some drops out
of them for free we should do so. Takes also the opportunity to remove
some whitespace errors from these functions.
Git-Dch: Ignore
|
|
'files' is a bit too generic as a name for a command usually only used
programmatically (if at all) by developers, so instead of "wasting" this
generic name for this we use "indextargets" which is actually the name
of the datastructure the displayed data is stored in.
Along with this rename the config options are renamed accordingly.
|
|
C++11 adds the 'override' specifier to mark that a method is overriding
a base class method and error out if not. We hide it in the APT_OVERRIDE
macro to ensure that we keep compiling in pre-c++11 standards.
Reported-By: clang-modernize -add-override -override-macros
Git-Dch: Ignore
|
|
There is an option to keep all targets (Packages, Sources, …) compressed
for a while now, but the all-or-nothing approach is a bit limited for
our purposes with additional targets as some of them are very big
(Contents) and rarely used in comparison, so keeping them compressed by
default can make sense, while others are still unpacked.
Most interesting is the copy-change maybe: Copy is used by the acquire
system as an uncompressor and it is hence expected that it returns the
hashes for the "output", not the input. Now, in the case of keeping a
file compressed, the output is never written to disk, but generated in
memory and we should still validated it, so for compressed files copy is
expected to return the hashes of the uncompressed file. We used to use
the config option to enable on-the-fly decompress in the method, but in
reality copy is never used in a way where it shouldn't decompress a
compressed file to get its hashes, so we can save us the trouble of
sending this information to the method and just do it always.
|
|
Limits which key(s) can be used to sign a repository. Not immensely useful
from a security perspective all by itself, but if the user has
additional measures in place to confine a repository (like pinning) an
attacker who gets the key for such a repository is limited to its
potential and can't use the key to sign its attacks for an other (maybe
less limited) repository… (yes, this is as weak as it sounds, but having
the capability might come in handy for implementing other stuff later).
|
|
These options could be set via configuration before, but the connection
to the actual sources is so strong that they should really be set in the
sources.list instead – especially as this can be done a lot more
specific rather than e.g. disabling Valid-Until for all sources at once.
Valid-Until-* names are chosen instead of the Min/Max-ValidTime as this
seems like a better name and their use in the wild is probably low
enough that this isn't going to confuse anyone if we have to names for
the same thing in different areas.
In the longrun, the config options should be removed, but for now
documentation hinting at the new options is good enough as these are the
kind of options you set once across many systems with different apt
versions, so the new way should work everywhere first before we
deprecate the old way.
|
|
indexRecords was used to parse the Release file – mostly the hashes –
while metaIndex deals with downloading the Release file, storing all
indexes coming from this release and … parsing the Release file, but
this time mostly for the other fields.
That wasn't a problem in metaIndex as this was done in the type specific
subclass, but indexRecords while allowing to override the parsing method
did expect by default a specific format.
APT isn't really supporting different types at the moment, but this is
a violation of the abstraction we have everywhere else and, which is the
actual reason for this merge: Options e.g. coming from the sources.list
come to metaIndex naturally, which needs to wrap them up and bring them
into indexRecords, so the acquire system is told about it as they don't
get to see the metaIndex, but they don't really belong in indexRecords
as this is just for storing data loaded from the Release file… the
result is a complete mess.
I am not saying it is a lot prettier after the merge, but at least
adding new options is now slightly easier and there is just one place
responsible for parsing the Release file. That can't hurt.
|
|
A specific trust state can be enforced via a sources.list option, but it
effects all entries handled by the same Release file, not just the entry
it was given on so we enforce acknowledgement of this by requiring the
same value to be (not) set on all such entries.
|
|
We support arch= for a while, now we finally add lang= as well and as a
first simple way of controlling which targets to acquire also target=.
This asked for a redesign of the internal API of parsing and storing
information about 'deb' and 'deb-src' lines. As this API isn't visible
to the outside no damage done through.
Beside being a nice cleanup (= it actually does more in less lines) it
also provides us with a predictable order of architectures as provides
in the configuration rather than based on string sorting-order, so that
now the native architecture is parsed/displayed first. Observeable e.g.
in apt-get output.
|
|
Various small leaks here and there. Nothing particularily big, but still
good to fix. Found by the sanitizers while running our testcases.
Reported-By: gcc -fsanitize
Git-Dch: Ignore
|
