| Age | Commit message (Collapse) | Author |
|---|
|
|
|
- make sure that for multiarch packages, we are passing the full
qualified package name to dpkg for removals. (Closes: #614298)
|
|
|
|
- support xz-compressed source v3 debian.tar files
|
|
- support xz-compressed source v3 debian.tar files
|
|
[ David Kalnischkies ]
* apt-pkg/depcache.cc:
- add SetCandidateRelease() to set a candidate version and
the candidates of dependencies if needed to a specified
release (Closes: #572709)
* cmdline/apt-get.cc:
- if --print-uris is used don't setup downloader as we don't need
progress, lock nor the directories it would create otherwise
- show dependencies of essential packages which are going to remove
only if they cause the remove of this essential (Closes: #601961)
- keep not installed garbage packages uninstalled instead of showing
in the autoremove section and installing those (Closes: #604222)
- change pkg/release behavior to use the new SetCandidateRelease
so installing packages from experimental or backports is easier
- really do not show packages in the extra section if they were
requested on the commandline, e.g. with a modifier (Closes: #184730)
* debian/control:
- add Vcs-Browser now that loggerhead works again (Closes: #511168)
- depend on debhelper 7 to raise compat level
- depend on dpkg-dev (>= 1.15.8) to have c++ symbol mangling
* apt-pkg/contrib/fileutl.cc:
- add a RealFileExists method and check that your configuration files
are real files to avoid endless loops if not (Closes: #604401)
- ignore non-regular files in GetListOfFilesInDir (Closes: #594694)
* apt-pkg/contrib/weakptr.h:
- include stddefs.h to fix compile error (undefined NULL) with gcc-4.6
* methods/https.cc:
- fix CURLOPT_SSL_VERIFYHOST by really passing 2 to it if enabled
* deb/dpkgpm.cc:
- fix popen/fclose mismatch reported by cppcheck. Thanks to Petter
Reinholdtsen for report and patch! (Closes: #607803)
* doc/apt.conf.5.xml:
- fix multipl{y,e} spelling error reported by Jakub Wilk (Closes: #607636)
* apt-inst/contrib/extracttar.cc:
- let apt-utils work with encoded tar headers if uid/gid are large.
Thanks to Nobuhiro Hayashi for the patch! (Closes: #330162)
* apt-pkg/cacheiterator.h:
- do not segfault if cache is not build (Closes: #254770)
* doc/apt-get.8.xml:
- remove duplicated mentioning of --install-recommends
* doc/sources.list.5.xml:
- remove obsolete references to non-us (Closes: #594495)
* debian/rules:
- use -- instead of deprecated -u for dh_gencontrol
- remove shlibs.local creation and usage
- show differences in the symbol files, but never fail
* pre-build.sh:
- remove as it is not needed for a working 'bzr bd'
* debian/{apt,apt-utils}.symbols:
- ship experimental unmangled c++ symbol files
* methods/rred.cc:
- operate optional on gzip compressed pdiffs
* apt-pkg/acquire-item.cc:
- don't uncompress downloaded pdiff files before feeding it to rred
- try downloading clearsigned InRelease before trying Release.gpg
- change the internal handling of Extensions in pkgAcqIndex
- add a special uncompressed compression type to prefer those files
- download and use i18n/Index to choose which Translations to download
* cmdline/apt-key:
- don't set trustdb-name as non-root so 'list' and 'finger'
can be used without being root (Closes: #393005, #592107)
* apt-pkg/deb/deblistparser.cc:
- rewrite LoadReleaseInfo to cope with clearsigned Releasefiles
* ftparchive/writer.cc:
- add config option to search for more patterns in release command
- include Index files by default in the Release file
* methods/{gzip,bzip}.cc:
- print a good error message if FileSize() is zero
* apt-pkg/aptconfiguration.cc:
- remove the inbuilt Translation files whitelist
|
|
* apt-pkg/aptconfiguration.cc:
- remove the inbuilt Translation files whitelist
|
|
|
|
* apt-pkg/deb/deblistparser.cc:
- rewrite LoadReleaseInfo to cope with clearsigned Releasefiles
|
|
- fix popen/fclose mismatch reported by cppcheck. Thanks to Petter
Reinholdtsen for report and patch! (Closes: #607803)
|
|
|
|
- ensure that history.log gets closed to avoid leaking a FD
(closes: #601649)
|
|
- ensure that history.log gets closed to avoid leaking a FD
(closes: #601649)
|
|
|
|
|
|
|
|
- fix issues with dir::state::status and dir::state::extended_states
when alternative rootdirs are used
|
|
the rootdir later anyway)
|
|
* apt-pkg/deb/debsystem.cc:
- set dir::state::status based at least on dir
This causes problems with alternative rootdirs
|
|
- Use FileFd::Size() instead of stat()ing the sources/binary/translations
indexes directly, so that we have transparent handling of gzipped
indexes.
|
|
- support ArmHardFloat port in CompleteArch, thanks to Sebastian
Andrzej Siewior for the patch!
|
|
- support 100-pinning in Release file with ButAutomaticUpgrades
as requested by the backports crew (Closes: #596097)
* apt-pkg/deb/deblistparser.cc:
- overrule NotAutomatic in case of ButAutomaticUpgrades
|
|
to give a better indication what this method will do if called.
|
|
- create Dir::Log if needed to support /var/log as tmpfs or similar,
inspired by Thomas Bechtold, thanks! (Closes: #523919, LP: #220239)
Easily done by moving a private method from pkgAcquire into the public
area of fileutl.cc to be able to use it also in here
|
|
- use the InstVer instead of the CurrentVer for the autobit transfer
Add also a small testcase to check the handling automatical
|
|
- set dir::state::status based at least on dir
|
|
|
|
- Write architecture information to history file.
|
|
|
|
- do not query each architecture for flat file archives
|
|
* debian/rules:
- Make DEB_BUILD_OPTIONS=noopt actually work by passing the right
CXXFLAGS.
* apt-pkg/contrib/fileutl.{h,cc}:
- Add support for reading of gzipped files with the new "ReadOnlyGzip"
OpenMode. (Closes: #188407)
- Link against zlib (in apt-pkg/makefile) and add zlib build dependency.
- [ABI BREAK] This adds a new private member to FileFd, but its
initialization is in the public header file.
* configure.in:
- Check for zlib library and headers.
* apt-pkg/acquire-item.cc, apt-pkg/deb/debindexfile.cc,
apt-pkg/deb/debrecords.cc, apt-pkg/deb/debsrcrecords.h,
cmdline/apt-cache.cc:
- Open Packages, Sources, and Translations indexes in "ReadOnlyGzip" mode.
* apt-pkg/deb/debindexfile.cc:
- If we do not find uncompressed package/source/translation indexes, look
for gzip compressed ones.
* apt-pkg/acquire-item.cc:
- If the Acquire::GzipIndexes option is true and we download a gzipped
index file, keep it as it is (and rename to .gz) instead of
uncompressing it.
* doc/apt.conf.5.xml:
- Document the new Acquire::GzipIndexes option.
* doc/po/apt-doc.pot, doc/po/de.po:
- German translation of new Acquire::GzipIndexes option.
* Add test/test-indexes.sh:
- Test behaviour of index retrieval and usage, in particular with
uncompressed and gzip compressed indexes.
* methods/gzip.cc: With FileFd now being able to read gzipped files, there
is no need for the gzip method any more to spawn an external gzip process.
Rewrite it to use FileFd directly, which makes the code a lot simpler, and
also using less memory and overhead.
|
|
- make the apt/term.log output unbuffered (thanks to Matt Zimmerman)
|
|
- make the used MMap moveable (and therefore dynamic resizeable) by
applying (some) mad pointer magic (Closes: #195018)
|
|
|
|
- make the apt/term.log output unbuffered (thanks to Matt Zimmerman)
|
|
|
|
instead of distributed in a few methods
|
|
|
|
Previously, linux-any was always matched, because the code simply
appended linux- to the APT::Architecture value. Now, it does this
only if the APT::Architecture value does not contain "-".
|
|
- Handle architecture wildcards (Closes: #547724).
|
|
expects the compressed contents to stay (such as the copy backend, or when using file:// repositories. Instead, introduce a new ReadOnlyGzip mode and use that where needed
|
|
indexes, to work with apt-get source as well
|
|
- If we do not find uncompressed package/source/translation indexes, look
for gzip compressed ones.
|
|
|
|
|
|
- on gpg verification failure warn and restore the last known
good state
- on failure display the IP of the server (useful for servers
that use round robin DNS)
- support Original-Maintainer in RewritePackageOrder
- enable cdrom autodetection via libudev by default
- show messsage about Vcs in use when apt-get source is run for
packages maintained in a Vcs
- better support transitional packages with mark auto-installed.
when the transitional package is in "oldlibs" the new package
is not marked auto installed (same is true for section
metapackages)
- provide new "deb mirror://archive.foo/mirrors.list sid main"
method expects a list of mirrors (generated on the server e.g.
via geoip) and will use that, including cycle on failure
- write apport crash file on package failure (disabled by default
on debian until apport is available)
- support mirror failure reporting (disabled by default on debian)
|
|
- switch {,Install-}Size to unsigned long long
- deal with long long, not with int to remove 2GB Limit (LP: #250909)
- deprecate AddSize with Multiplier as it is unused and switch to
boolean instead to handle the sizes more gracefully.
- switch i{Download,Usr}Size from double to (un)signed long long
* cmdline/apt-get.cc:
- use unsigned long long instead of double to store values it gets
|
|
- split Open() into submethods to be able to build only parts
- make the OpProgress optional in the Cache buildprocess
|
|
- switch {,Install-}Size to unsigned long long
* apt-pkg/depcache.cc:
- deal with long long, not with int to remove 2GB Limit (LP: #250909)
|
|
- add missing include
* methods/mirror.{cc,h}:
- add SelectNextMirror() and InitMirrors() functions
- read all mirrors into the AllMirrors vector
|
