| Age | Commit message (Collapse) | Author |
|---|
|
This can happen e.g. for file: repositories. There is no inherent
problem with setting such values internally, but its bad style,
forbidden in the manpage and could be annoying in the future.
Gbp-Dch: Ignore
(cherry picked from commit 44ecb8c3579e5ae8828f83530e4151a0ff84d5d6)
(cherry picked from commit fec19de5e786564ed8699b38310f7d1a7c348c01)
|
|
If the dependency line does not contain spaces in the repository
but does in the dpkg status file (because dpkg normalized the
dependency list), the dpkg line might be longer than the line
in the repository. If it now happens to be longer than 1024
characters, it would be skipped, causing the hashes to be
out of date.
Note that we have to bump the minor cache version again as
this changes the format slightly, and we might get mismatches
with an older src cache otherwise.
Fixes Debian/apt#23
(cherry picked from commit 708e2f1fe99e6f067292bc909f03f12c181e4798)
|
|
If a Binary field contains one or more spaces before a comma, the
code produced a segmentation fault, as it accidentally set a pointer
to 0 instead of the value of the pointer.
If the comma is at the beginning of the field, the code would
create a binStartNext that points one element before the start
of the string, which is undefined behavior.
We also need to check that we do not exit the string during the
replacement of spaces before commas: A string of the form " ,"
would normally exit the boundary of the Buffer:
binStartNext = offset 1 ','
binEnd = offset 0 ' '
isspace_ascii(*binEnd) = true => --binEnd
=> binEnd = - 1
We get rid of the problem by only allowing spaces to be eliminated
if they are not the first character of the buffer:
binStartNext = offset 1 ','
binEnd = offset 0 ' '
binEnd > buffer = false, isspace_ascii(*binEnd) = true
=> exit loop
=> binEnd remains 0
(cherry picked from commit ce6cd75dc367b92f65e4fb539dd166d0f3361f8c)
|
|
Instead of erroring out when receiving a SIGINT, let the
child deal with it - we'll error out anyway if the child
exits with an error or due to the signal. Also ignore
SIGQUIT, as system() ignores it.
This basically fixes Bug #832593, but: we are running
the hooks via sh -c. Some shells exit with a signal
error even if the command they are executing catches
the signal and exits successfully. So far, this has
been noticed on dash, which unfortunately, is our
default shell.
Example:
$ cat trap.sh
trap 'echo int' INT; sleep 10; exit 0
$ if dash -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi
^Cint
FAIL: 130
$ if mksh -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi
^Cint
OK: 0
$ if bash -c ./trap.sh; then echo OK: $?; else echo FAIL: $?; fi
^Cint
OK: 0
(cherry picked from commit a6ae3d3df490e7a5a1c8324ba9dc2e63972b1529)
|
|
APT (usually) knows which package is essential or not, so we can avoid
passing this force flag to dpkg unconditionally if the user hasn't
chosen a non-default essential handling obscuring the information.
(cherry picked from commit d3930f8716f439c229cd3d11813823d847a2ecff)
|
|
If we have a (e.g. locally built) deb file installed and do try to
install it again apt complained about this being a downgrade, but it
wasn't as it is the very same version… it was just confused into not
merging the versions together which looks like a downgrade then.
The same size assumption is usually good, but given that volatile files
are parsed last (even after the status file) the base assumption no
longer holds, but is easy to adept without actually changing anything in
practice.
(cherry picked from commit e7edb2fef8370d54a4b8e5a01266e6eda81ef84e)
|
|
Writing first means that even in the event of a power-failure the
autobit is saved for future processing instead of "forgotten" so that
the package is treated as manually installed.
In some cases we have to re-run the writing after dpkg is done through
as dpkg can let packages disappear and in such cases apt will move
autobits around (or in that case non-autobits) which we need to store.
(cherry picked from commit 309f497b7280a45e3626493318adb6d39ba5c69b)
|
|
If a package file is formatted in a way that that no space
follows a deprecated "<", we would reformat it to "<=" and
increase the length of the output by 1, which can break.
Under normal circumstances with "<=" this should not be an
issue.
Closes: #828812
(cherry picked from commit b6e9756ca03ec887ef1d0bc8e38f63c29db7a365)
|
|
Filesize is a silly hash all by itself, but in combination with others
it can be a strong opponent, so ensuring that it is in the list of
hashes and hence checked by the normal course of action the acquire
process takes is a good thing.
(cherry picked from commit 5da51e0e2da3f055306562d38103b06a23d81719)
|
|
Setting the C++ locale via std::locale::global(std::locale("")); which
would otherwise default to the default C locale (aka: unaffected by
setlocale) effects the formatting of numeric types in IO streams, which
for output for humans is perfectly sensible, but breaks our many text
interfaces used and parsed by us and others without expecting the
numbers to be formatted.
Closes: #825396
(cherry picked from commit b58e2c7c56b1416a343e81f9f80cb1f02c128e25)
|
|
Git-Dch: Ignore
Reported-By: gcc -fsanitize=address
|
|
|
|
The structure we parse the data into has a dedicated size field, but it
tends to be easier to handle it as a (very weak) checksum.
|
|
The (unlikely) waitpid failure case should fallthrough the code just
like the other failures (and successes) instead of taking a shortcut
avoiding all the cleanup (progress) and finishing touches (log, state).
This also delays the cleanup of the progress until apt is really done
with everything and "just" has the post-invokes left to do, so the
period of 'apt looks finished as it stopped the progress' and 'apt
really finished as I have the shell-prompt back' is shorter even if
there is no progress reported anymore, so the bar lingers at 100%…
Ideally even the post-invokes would be covered by progress, but they
can have their own output and dealing with that could be hard.
Git-Dch: Ignore
|
|
This effectively merges branch 'typofixes-vlajos-20150807' of github.com:vlajos/apt
with the following commit:
commit 13cacb3e2e2352ba701e769fc889e3344fabbf7e
Author: Veres Lajos <vlajos@gmail.com>
Date: Sun Aug 9 00:12:53 2015 +0100
typofix - https://github.com/vlajos/misspell_fixer
It has been rebased for a better commit message.
|
|
Mysteriously segfaults only on i386 for me, but at least one reporter
had the same behavior and it makes sense that this is the problem as the
parsing of Source: was fixed in 1.2.2 – before the not remapped group
was not used.
We don't use our usual Dynamic<> trick here as we don't have it in the
parser. Its a bit of a layer violation to do this parsing here, but its
how it is always was…
Until next time with this lovely kind of problem.
Closes: 812251
Thanks: Francesco Poli and Marc Haber for testdata.
|
|
Reported-By: Helmut Grohne on IRC
|
|
The Date field in the Release file is useful to avoid allowing an
attacker to 'downgrade' a user to earlier Release files (and hence to
older states of the archieve with open security bugs). It is also needed
to allow a user to define min/max values for the validation of a Release
file (with or without the Release file providing a Valid-Until field).
APT wasn't formally requiring this field before through and (agrueable
not binding and still incomplete) online documentation declares it
optional (until now), so we downgrade the error to a warning for now to
give repository creators a bit more time to adapt – the bigger ones
should have a Date field for years already, so the effected group should
be small in any case.
It should be noted that earlier apt versions had this as an error
already, but only showed it if a Valid-Until field was present (or the
user tried to used the configuration items for min/max valid-until).
Closes: 809329
|
|
Part of hidden classes, so conversion is abi-free.
Git-Dch: Ignore
|
|
These virtual methods are implemented in hidden classes, so we can drop
them without breaking the ABI.
Git-Dch: Ignore
|
|
In commit a221efc331693f8905da870141756c892911c433 I promoted the source
package name and version to the binary cache for faster access by e.g.
EDSP, but due to changing the interpretation length to soon we always
ignored the version part of the Source field, so that packages ended up
having the binary version as source version – which while usually just
fine it is wrong for binary rebuilds.
Closes: 812492
|
|
build-dep was implemented by parsing the build-dependencies of a package
and figuring out which packages to install/remove based on this. That
means that for the first level of dependencies build-dep was
implementing its very own resolver with all the benefits (aka: bugs)
this gives us for not using the existing resolver for all levels.
Making this work involves generating a dummy binary package with fitting
Depends and Conflicts and as we can't create them out of thin air the
cache generation needs to be involved so we end up writing a Packages
file which we want to parse – after we have parsed the other Packages
files already. With .dsc/.deb files we could add them before we started
parsing anything.
With a bit of care we can avoid generating too much data we have to
throw away again (as many parts assume that e.g. the count of packages
doesn't change midair), so that on a speed front there shouldn't be
much of a difference, but output can be slightly confusing as if we have
a completely valid cache on disk the "Reading package lists... Done" is
printed two times – but apt is pretty quick about it in that case.
Closes: #137560, #444930, #489911, #583914, #728317, #812173
|
|
Git-Dch: Ignore
|
|
Git-Dch: ignore
|
|
Git-Dch: ignore
Thanks: David Kalnischkies
|
|
Thanks: Thomas Reusch
|
|
Git-Dch: Ignore
|
|
Architectures for packages which do not belong to the native nor a
foreign architecture (dubbed barbarian for now) which are marked
M-A:foreign still provide in their own architecture even if not for
others. Also, other M-A:foreign (and allowed) packages provide in these
barbarian architectures.
|
|
I overlooked this
Gbp-Dch: ignore
|
|
Downloading and storing are two different operations were different
compression types can be preferred. For downloading we provide the
choice via Acquire::CompressionTypes::Order as there is a choice to
be made between download size and speed – and limited by whats available
in the repository.
Storage on the other hand has all compressions currently supported by
apt available and to reduce runtime of tools accessing these files the
compression type should be a low-cost format in terms of decompression.
apt traditionally stores its indexes uncompressed on disk, but has
options to keep them compressed. Now that apt downloads additional files
we also deal with files which simply can't be stored uncompressed as
they are just too big (like Contents for apt-file). Traditionally they
are downloaded in a low-cost format (gz) as repositories do not provide
other formats, but there might be even lower-cost formats and for
download we could introduce higher-cost in the repositories.
Downloading an entire index potentially requires recompression to
another format, so an update takes potentially longer – but big files
are usually updated via pdiffs which has to de- and re-compress anyhow
and does it on the fly anyhow, so there is no extra time needed and in
general it seems to be benefitial to invest the time in update to save
time later on file access.
|
|
Do not create strings within the loop, that creates one string
per language and does more work than needed. Instead, reserve
enough space at the beginning and assign the prefix, and then
resize and append inside the loop.
Also call exists with the string itself instead of the c_str(),
this means that the lookup uses the size information in the
string now and does not have to call strlen() on it.
|
|
This improves performance, as we now can ignore unequal strings
based on their length already.
Gbp-Dch: ignore
|
|
This improves performance of the cache generation on my
ARM platform (4x Cortex A15) by about 10% to 20% from
2.35-2.50 to 2.1 seconds.
|
|
Now (55153bf94ff28a23318e79aa48242244c4d82b3c) that pkgTagFile can be
told to deal with all sorts of comments we can use this mode to parse
dsc (as by catch) and debian/control files properly even in the wake of
multiline fields spliced with comments like Build-Depends.
Closes: 806775
|
|
Debian has a Packages file for arch:all already, but the arch:any files
contain arch:all packages as well, so downloading it would be a total
waste of resources. Getting this solved is on the list of things to do,
but it is also the hardest part – for index targets like Contents the
situation is much easier and less server/client implementations are
involved so we might not want to stall them.
A repository can now declare via:
No-Support-for-Architecture-all: Packages
that even if an arch:all Packages exists, it shouldn't be downloaded, so
that support for Contents files can be added now.
See also 1dd20368486820efb6ef4476ad739e967174bec4 for the implementation
of downloading arch:all index targets, which this is limiting.
The field uses the name of the target from the apt configuration for
simplicity and is negative by design as this field is intended to be
supported/needed only for a "short" time (one or two Debian releases).
While this commit theoretically supports any target, its expected to
only see "Packages" as a value in reality.
|
|
We do not see those branches at all during normal mode of
operation (that is, during cache generation), so tell the
compiler about it.
|
|
The Set() method returns false if the input is no hex number,
so simply use that.
|
|
This makes the code parsing architecture lists slower, but on
the other hand, improves the more generic case of reading
dependencies from Packages files.
|
|
This converts all callers that read machine-generated data,
callers that might work with user input are not converted.
|
|
If we can't work with the hashes we parsed from the Release file we
display now an error message if the Release file includes only weak
hashes instead of downloading the indexes and failing to verify them
with "Hash Sum mismatch" even through the hashes didn't mismatch (they
were just weak).
If for some (unlikely) reason we have got weak hashes only for
individual targets we will show a warning to this effect (again, befor
downloading and failing the index itself).
Closes: 806459
|
|
dpkg does that when reading package files, so we should do
the same. This only deals with parsing names from binary
package paragraphs, it does not look at source package names
and/or the list of binaries in a dsc file.
Closes: #807012
|
|
We need to pass 0llu instead of 0 as the init value, otherwise
std::accumulate will calculate with ints.
Reported-by: Raphaël Hertzog
|
|
Otherwise a user is subject to unexpected content-injection depending on
which directory she happens to start apt in. This also cleans up the code
requiring less implementation details in build-dep which is always good.
Technically, this is an ABI break as we override virtual methods, but
that they weren't overridden was a mistake resulting in pure classes,
which shouldn't be pure, so they were unusable – and as they are new in
1.1 nobody is using them yet (and hopefully ever as they are borderline
implementation details).
Closes: 806693
|
|
Git-Dch: Ignore
|
|
Reference mail:
https://lists.debian.org/debian-l10n-english/2015/11/msg00006.html
|
|
Reported-By: cppcheck
Git-Dch: Ignore
|
|
A slightly unlikely bug, but lets fix it while slightly reworking this
whole function to be slightly saner to look at, even if still not good.
Git-Dch: Ignore
|
|
Unlinking /dev/null is bad, we shouldn't do that. Also, we should print
at least a warning if we tried to unlink a file but didn't manage to
pull it of (ignoring the case were the file is /dev/null or doesn't
exist in the first place).
This got triggered by a relatively unlikely to cause problem in
pkgAcquire::Worker::PrepareFiles which would while temporary
uncompressed files (which are set to keep compressed) figure out that to
files are the same and prepare for sharing by deleting them. Bad move.
That also shows why not printing a warning is a bad idea as this hide
the error for in non-root test runs.
Git-Dch: Ignore
|
|
Leading or trailing newlines can be confusing for our parser as it
expects two newlines to start/stop a new stanza. To solve this the lines
we wanna add are printed first, ignore any leading newlines and then add
the stanza as provided by dpkg-deb with or without trailing newlines as
the parser will look at the first stanza only anyway and removing
trailing newlines is considerably harder to do.
Closes: 802553
|
|
Based on a discussion with Niels Thykier who asked for Contents-all this
implements apt trying for all architecture dependent files to get a file
for the architecture all, which is treated internally now as an official
architecture which is always around (like native). This way arch:all
data can be shared instead of duplicated for each architecture requiring
the user to download the same information again and again.
There is one problem however: In Debian there is already a binary-all/
Packages file, but the binary-any files still include arch:all packages,
so that downloading this file now would be a waste of time, bandwidth
and diskspace. We therefore need a way to decide if it makes sense to
download the all file for Packages in Debian or not. The obvious answer
would be a special flag in the Release file indicating this, which would
need to default to 'no' and every reasonable repository would override
it to 'yes' in a few years time, but the flag would be there "forever".
Looking closer at a Release file we see the field "Architectures", which
doesn't include 'all' at the moment. With the idea outlined above that
'all' is a "proper" architecture now, we interpret this field as being
authoritative in declaring which architectures are supported by this
repository. If it says 'all', apt will try to get all, if not it will be
skipped. This gives us another interesting feature: If I configure a
source to download armel and mips, but it declares it supports only
armel apt will now print a notice saying as much. Previously this was a
very cryptic failure. If on the other hand the repository supports mips,
too, but for some reason doesn't ship mips packages at the moment, this
'missing' file is silently ignored (= that is the same as the repository
including an empty file).
The Architectures field isn't mandatory through, so if it isn't there,
we assume that every architecture is supported by this repository, which
skips the arch:all if not listed in the release file.
|
