summaryrefslogtreecommitdiff
path: root/apt-pkg/deb
AgeCommit message (Collapse)Author
2015-06-15populate the Architecture field for PackageFilesDavid Kalnischkies
This is mainly visible in the policy, so that you can now pin by b= and let it only effect Packages files of this architecture and hence the packages coming from it (which do not need to be from this architecture, but very likely are in a normal repository setup). If you should pin by architecture in this way is a different question… Closes: 687255
2015-06-15implement default apt-get file --release-info modeDavid Kalnischkies
Selecting targets based on the Release they belong to isn't to unrealistic. In fact, it is assumed to be the most used case so it is made the default especially as this allows to bundle another thing we have to be careful with: Filenames and only showing targets we have acquired. Closes: 752702
2015-06-12store Release files data in the CacheDavid Kalnischkies
We used to read the Release file for each Packages file and store the data in the PackageFile struct even through potentially many Packages (and Translation-*) files could use the same data. The point of the exercise isn't the duplicated data through. Having the Release files as first-class citizens in the Cache allows us to properly track their state as well as allows us to use the information also for files which aren't in the cache, but where we know to which Release file they belong (Sources are an example for this). This modifies the pkgCache structs, especially the PackagesFile struct which depending on how libapt users access the data in these structs can mean huge breakage or no visible change. As a single data point: aptitude seems to be fine with this. Even if there is breakage it is trivial to fix in a backportable way while avoiding breakage for everyone would be a huge pain for us. Note that not all PackageFile structs have a corresponding ReleaseFile. In particular the dpkg/status file as well as *.deb files have not. As these have only a Archive property need, the Component property takes over this duty and the ReleaseFile remains zero. This is also the reason why it isn't needed nor particularily recommended to change from PackagesFile to ReleaseFile blindly. Sticking with the earlier is usually the better option.
2015-06-11implement 'apt-get files' to access index targetsDavid Kalnischkies
Downloading additional files is only half the job. We still need a way to allow external tools to know where the files are they requested for download given that we don't want them to choose their own location. 'apt-get files' is our answer to this showing by default in a deb822 format information about each IndexTarget with the potential to filter the records based on lines and an option to change the output format. The command serves also as an example on how to get to this information via libapt.
2015-06-11use an enum instead of strings as IndexTarget::Option interfaceDavid Kalnischkies
Strings are easy to typo and we can keep the extensibility we require here with a simple enum we can append to without endangering ABI. Git-Dch: Ignore
2015-06-11use IndexTarget to get to IndexFileDavid Kalnischkies
Removes a bunch of duplicated code in the deb-specific parts. Especially the Description part is now handled centrally by IndexTarget instead of being duplicated to the derivations of IndexFile. Git-Dch: Ignore
2015-06-11show URI.Path in all acquire item descriptionsDavid Kalnischkies
It is a rather strange sight that index items use SiteOnly which strips the Path, while e.g. deb files are downloaded with NoUserPassword which does not. Important to note here is that for the file transport Path is pretty important as there is no Host which would be displayed by Site, which always resulted in "interesting" unspecific errors for "file:". Adding a 'middle' ground between the two which does show the Path but potentially modifies it (it strips a pending / at the end if existing) solves this "file:" issue, syncs the output and in the end helps to identify which file is meant exactly in progress output and co as a single site can have multiple repositories in different paths.
2015-06-10rename Calculate- to GetIndexTargets and use it as official APIDavid Kalnischkies
We need a general way to get from a sources.list entry to IndexTargets and with this change we can move from pkgSourceList over the list of metaIndexes it includes to the IndexTargets each metaIndex can have. Git-Dch: Ignore
2015-06-10stop using IndexTarget pointers which are never freedDavid Kalnischkies
Creating and passing around a bunch of pointers of IndexTargets (and of a vector of pointers of IndexTargets) is probably done to avoid the 'costly' copy of container, but we are really not in a timecritical operation here and move semantics will help us even further in the future. On the other hand we never do a proper cleanup of these pointers, which is very dirty, even if structures aren't that big… The changes will effecting many items only effect our own hidden class, so we can do that without fearing breaking interfaces or anything. Git-Dch: Ignore
2015-06-10store all targets data in IndexTarget structDavid Kalnischkies
We still need an API for the targets, so slowly prepare the IndexTargets to let them take this job. Git-Dch: Ignore
2015-06-10abstract the code to iterate over all targets a bitDavid Kalnischkies
We have two places in the code which need to iterate over targets and do certain things with it. The first one is actually creating these targets for download and the second instance pepares certain targets for reading. Git-Dch: Ignore
2015-06-09configureable acquire targets to download additional filesDavid Kalnischkies
First pass at making the acquire system capable of downloading files based on configuration rather than hardcoded entries. It is now possible to instruct 'deb' and 'deb-src' sources.list lines to download more than just Packages/Translation-* and Sources files. Details on how to do that can be found in the included documentation file.
2015-06-09rework hashsum verification in the acquire systemDavid Kalnischkies
Having every item having its own code to verify the file(s) it handles is an errorprune process and easy to break, especially if items move through various stages (download, uncompress, patching, …). With a giant rework we centralize (most of) the verification to have a better enforcement rate and (hopefully) less chance for bugs, but it breaks the ABI bigtime in exchange – and as we break it anyway, it is broken even harder. It shouldn't effect most frontends as they don't deal with the acquire system at all or implement their own items, but some do and will need to be patched (might be an opportunity to use apt on-board material). The theory is simple: Items implement methods to decide if hashes need to be checked (in this stage) and to return the expected hashes for this item (in this stage). The verification itself is done in worker message passing which has the benefit that a hashsum error is now a proper error for the acquire system rather than a Done() which is later revised to a Failed().
2015-05-11stop depending on copy-on-write for std::stringDavid Kalnischkies
In 66c3875df391b1120b43831efcbe88a78569fbfe we workaround/fixed a problem where the code makes the assumption that the compiler uses copy-on-write implementations for std::string. Turns out that for c++11 compatibility gcc >= 5 will stop doing this by default.
2015-04-19Merge branch 'debian/jessie' into debian/experimentalDavid Kalnischkies
Conflicts: apt-pkg/acquire-item.cc cmdline/apt-key.in methods/https.cc test/integration/test-apt-key test/integration/test-multiarch-foreign
2015-04-12parse specific-arch dependencies correctly on single-arch systemsDavid Kalnischkies
On single-arch the parsing was creating groupnames like 'apt:amd64' even through it should be 'apt' and a package in it belonging to architecture amd64. The result for foreign architectures was as expected: The dependency isn't satisfiable, but for native architecture it means the wrong package (ala apt:amd64:amd64) is linked so this is also not satisfiable, which is very much not expected. No longer excluding single-arch from this codepath allows the generation of the correct links, which still link to non-exisiting packages for foreign dependencies, but natives link to the expected native package just as if no architecture was given. For negative arch-specific dependencies ala Conflicts this matter was worse as apt will believe there isn't a Conflict to resolve, tricking it into calculating a solution dpkg will refuse. Architecture specific positive dependencies are rare in jessie – the only one in amd64 main is foreign –, negative dependencies do not even exist. Neither class has a native specimen, so no package in jessie is effected by this bug, but it might be interesting for stretch upgrades. This also means the regression potential is very low. Closes: 777760
2015-04-07fix crash in order writing in pkgDPkgPM::WriteApportReport()Michael Vogt
libapt can be configured to write various bits of information to a file creating a report via apport. This is disabled by default in Debian and apport residing only in /experimental so far, but Ubuntu and other derivatives have this (in some versions) enabled by default and there is no regression potentially here. The crash is caused by a mismatch of operations vs. strings for operations, so adding the missing strings for these operations solves the problem. [commit message by David Kalnischkies] LP: #1436626
2015-03-16parse arch-qualified Provides correctlyHelmut Grohne
The underlying problem is that libapt-pkg does not correctly parse these provides. Internally, it creates a version named "baz:i386" with architecture amd64. Of course, such a package name is invalid and thus this version is completely inaccessible. Thus, this bug should not cause apt to accept a broken situation as valid. Nevertheless, it prevents using architecture qualified depends. Closes: 777071
2015-03-16fix some new compiler warnings reported by gcc-5David Kalnischkies
Git-Dch: Ignore
2015-03-16properly implement pkgRecord::Parser for *.deb filesDavid Kalnischkies
Implementing FileName() works for most cases for us, but other frontends might need more and even for us its not very stable as the normal Jump() implementation is pretty bad on a deb file and produce errors on its own at times. So, replacing this makeshift with a complete implementation by mostly just shuffling code around.
2015-03-16merge debian/sid into debian/experimentalDavid Kalnischkies
2014-12-23pass-through stdin fd instead of content if not a terminalDavid Kalnischkies
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of not logging terminal in case stdin & stdout are not a terminal. The problem is that we are then trying to pass-through stdin content by reading from the apt-process stdin and writing it to the stdin of the child (dpkg), which works great for users who can control themselves, but pipes and co are a bit less forgiving causing us to pass everything to the first child process, which if the sending part of the pipe is e.g. 'yes' we will never see the end of it (as the pipe is full at some point and further writing blocks). There is a simple solution for that of course: If stdin isn't a terminal, we us the apt-process stdin as stdin for the child directly (We don't do this if it is a terminal to be able to save the typed input in the log). Closes: 773061
2014-12-23always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Note that dpkg currently has a workaround implemented to allow upgrades to jessie to be clean, so that the test works before and after. Also note that test (compared to the one in the bug) drops the await test as its is considered a loop by dpkg now. Closes: 769609
2014-12-23do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-10do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-07always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Closes: 769609
2014-12-07correct architecture detection for 'rc' packages for purgeDavid Kalnischkies
We were already considering these cases, but the code was flawed, so that packages changing architectures are incorrectly handled and hence the wrong architecture is used to call dpkg with, so that dpkg says the package isn't installed (which it isn't for the requested architecture). Closes: 770898
2014-11-28fix PTY interaction on linux and kfreebsdDavid Kalnischkies
We run dpkg on its own pty, so we can log its output and have our own output around it (like the progress bar), while also allowing debconf and configfile prompts to happen. In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to constantly reopening the slave for kfreebsd. This has the sideeffect though that in some cases slave and master will lose their connection on linux, so that no output is passed along anymore. We fix this by having always an fd referencing the slave open (linux), but we don't use it (kfreebsd). Failing to get our PTY up and running has many (bad) consequences including (not limited to, nor all at ones or in any case) garbled ouput, no output, no logging, a (partial) mixture of the previous items, … This commit is therefore also reshuffling quiet a bit of the creation code to get especially the output part up and running on linux and the logging for kfreebsd. Note that the testcase tries to cover some cases, but this is an interactivity issue so only interactive usage can really be a good test. Closes: 765687
2014-11-28close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-19fix PTY interaction on linux and kfreebsdDavid Kalnischkies
We run dpkg on its own pty, so we can log its output and have our own output around it (like the progress bar), while also allowing debconf and configfile prompts to happen. In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to constantly reopening the slave for kfreebsd. This has the sideeffect though that in some cases slave and master will lose their connection on linux, so that no output is passed along anymore. We fix this by having always an fd referencing the slave open (linux), but we don't use it (kfreebsd). Failing to get our PTY up and running has many (bad) consequences including (not limited to, nor all at ones or in any case) garbled ouput, no output, no logging, a (partial) mixture of the previous items, … This commit is therefore also reshuffling quiet a bit of the creation code to get especially the output part up and running on linux and the logging for kfreebsd. Note that the testcase tries to cover some cases, but this is an interactivity issue so only interactive usage can really be a good test. Closes: 765687
2014-11-18close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-10use 'best' hash for source authenticationDavid Kalnischkies
Collect all hashes we can get from the source record and put them into a HashStringList so that 'apt-get source' can use it instead of using always the MD5sum. We therefore also deprecate the MD5 struct member in favor of the list. While at it, the parsing of the Files is enhanced so that records which miss "Files" (aka MD5 checksums) are still searched for other checksums as they include just as much data, just not with a nice and catchy name. This is a cherry-pick of 1262d35 with some dirty tricks to preserve ABI. LP: 1098738
2014-11-08guard ABI changes for SourcePkg/Ver in pkgCacheDavid Kalnischkies
Git-Dch: Ignore
2014-11-08mark internal interfaces as hiddenDavid Kalnischkies
We have a bunch of classes which are of no use for the outside world, but were still exported and so needed to preserve ABI/API. Marking them as hidden to not export them any longer is a big API break in theory, but in practice nobody is using them – as if they would its a bug.
2014-11-08better non-virtual metaIndex.LocalFileName() implementationDavid Kalnischkies
We can't add a new virtual method without breaking the ABI, but we can freely add new methods, so for older ABIs we just implement this method with a dynamic_cast, so that clients can be more ignorant about the API here and especially don't need to pull a very dirty trick by assuming internal knowledge (like apt-get did here).
2014-11-08use a abi version check similar to the gcc checkDavid Kalnischkies
Git-Dch: Ignore
2014-11-08replace ignore-deprecated #pragma dance with _PragmaDavid Kalnischkies
For compatibility we use/provide and fill quiet some deprecated methods and fields, which subsequently earns us a warning for using them. These warnings therefore have to be disabled for these codeparts and that is what this change does now in a slightly more elegant way. Git-Dch: Ignore
2014-11-06Merge remote-tracking branch 'mvo/feature/no-more-acquire-guessing' into ↵Michael Vogt
debian/experimental
2014-11-05Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: debian/changelog
2014-11-05apt-pkg/deb/debindexfile.{cc,h}: kill GetIndexes()Michael Vogt
2014-10-29Only support Translation-* that are listed in the {In,}Release fileMichael Vogt
Handle Translation-* files exactly like Packages files (with the expection that it is ok if a download of them fails). Remove all "guessing" on apts side. This will elimimnate a bunch of errors releated to captive portals and similar. Its also more correct and removes another potential attack vector.
2014-10-23Fix incorrect comparison between signed/unsignedMichael Vogt
Git-Dch: ignore
2014-10-23Use sysconf(_SC_ARG_MAX) to find the size of Dpkg::MaxArgBytesMichael Vogt
Instead of hardcoding Dpkg::MaxArgBytes find out about it using the sysconf(_SC_ARG_MAX) call.
2014-10-14Merge branch 'debian/sid' into debian/experimentalMichael Vogt
2014-10-13fix compile and tests errorDavid Kalnischkies
I am pretty sure I did that before committing broken stuff… Git-Dch: Ignore
2014-10-13trusted=yes sources are secure, we just don't know whyDavid Kalnischkies
Do not require a special flag to be present to update trusted=yes sources as this flag in the sources.list is obviously special enough. Note that this is just disabling the error message, the user will still be warned about all the (possible) failures the repository generated, it is just triggering the acceptance of the warnings on a source-by-source level. Similarily, the trusted=no flag doesn't require the user to pass additional flags to update, if the repository looks fine in the view of apt it will update just fine. The unauthenticated warnings will "just" be presented then the data is used. In case you wonder: Both was the behavior in previous versions, too.
2014-10-13do not inline virtual destructors with d-pointersDavid Kalnischkies
Reimplementing an inline method is opening a can of worms we don't want to open if we ever want to us a d-pointer in those classes, so we do the only thing which can save us from hell: move the destructors into the cc sources and we are good. Technically not an ABI break as the methods inline or not do the same (nothing), so a program compiled against the old version still works with the new version (beside that this version is still in experimental, so nothing really has been build against this library anyway). Git-Dch: Ignore
2014-10-08Update Status field values handlingGuillem Jover
Remove long obsolete (hold, hold-reinstreq, removal-failed) or just wrong (post-inst-failed vs postinst-failed) values, that have been autoconverted by dpkg at run-time to their new equivalents, so there should not be any such instance in any recent system (removal-failed since dpkg 1.1.4 in Apr 1996, hold and hold-reinstreq since dpkg 1.2.0 in May 1996). dpkg even stopped doing the mapping in 1.15.4 and 1.15.8 respectively. At the same time sort the list in the same order as they appear in the dpkg code.
2014-10-07Merge remote-tracking branch 'upstream/debian/experimental' into ↵Michael Vogt
feature/acq-trans Conflicts: apt-pkg/acquire-item.cc
2014-10-06implement the updated build profile specjosch