| Age | Commit message (Collapse) | Author |
|---|
|
required and important were swapped, leading to wrong
output.
Closes: #807523
Thanks: Manuel A. Fernandez Montecelo for discovering this
|
|
These assumptions were once true, but they aren't anymore, so what is
supposed to be a speed up is effectively a slowdown [not that it would
be noticible].
Usage of SingleArchFindPkg was nuked in a stable update already as the
included assumption was actually harmful btw, which is why we should get
right of other 'non-harmful' but still untrue assumptions while we can.
Git-Dch: Ignore
|
|
How the Multi-Arch field and pkg:<arch> dependencies interact was
discussed at DebConf15 in the "MultiArch BoF". dpkg and apt (among other
tools like dose) had a different interpretation in certain scenarios
which we resolved by agreeing on dpkg view – and this commit realizes
this agreement in code.
As was the case so far libapt sticks to the idea of trying to hide
MultiArch as much as possible from individual frontends and instead
translates it to good old SingleArch. There are certainly situations
which can be improved in frontends if they know that MultiArch is upon
them, but these are improvements – not necessary changes needed
to unbreak a frontend.
The implementation idea is simple: If we parse a dependency on foo:amd64
the dependency is formed on a package 'foo:amd64' of arch 'any'. This
package is provided by package 'foo' of arch 'amd64', but not by 'foo'
of arch 'i386'. Both of those foo packages provide each other through
(assuming foo is M-A:foreign) to allow a dependency on 'foo' to be
satisfied by either foo of amd64 or i386. Packages can also declare to
provide 'foo:amd64' which is translated to providing 'foo:amd64:any' as
well.
This indirection over provides was chosen as the alternative would be to
teach dependency resolvers how to deal with architecture specific
dependencies – which violates the design idea of avoiding resolver
changes, especially as architecture-specific dependencies are a
cornercase with quite a few subtil rules. Handling it all over versioned
provides as we already did for M-A in general seems much simpler as it
just works for them.
This switch to :any has actually a "surprising" benefit as well: Even
frontends showing a package name via .Name() [which doesn't show the
architecture] will display the "architecture" for dependencies in which
it was explicitely requested, while we will not show the 'strange' :any
arch in FullName(true) [= pretty-print] either. Before you had to
specialcase these and by default you wouldn't get these details shown.
The only identifiable disadvantage is that this complicates error
reporting and handling. apt-get's ShowBroken has existing problems with
virtual packages [it just shows the name without any reason], so that
has to be worked on eventually. The other case is that detecting if a
package is completely unknown or if it was at least referenced somewhere
needs to acount for this "split" – not that it makes a practical
difference which error is shown… but its one of the improvements
possible.
|
|
Previously we had python:any:amd64, python:any:i386, … in the cache and
the dependencies of an amd64 package would be on python:any:amd64, of an
i386 on python:any:i386 and so on. That seems like a relatively
pointless endeavor given that they will all be provided by the same
packages and therefore also a waste of space.
Git-Dch: Ignore
|
|
|
|
Now that we can dynamically create dependencies and provides as needed
rather than requiring to know with which architectures we will deal
before running we can allow the listparser to parse all records rather
than skipping records of "unknown" architectures.
This can e.g. happen if a user has foreign architecture packages in his
status file without dpkg knowing about this architecture (or apt
configured in this way).
A sideeffect is that now arch:all packages are (correctly) recorded as
available from any Packages file, not just from the native one – which
has its downsides for the resolver as mixed-arch source packages can
appear in different architectures at different times, but that is the
problem of the resolver and dealing with it in the parser is at best a
hack (and also depends on a helpful repository).
Another sideeffect is that his allows :none packages to appear in
Packages files again as we don't do any kind of checks now, but given
that they aren't really supported (anymore) by anyone we can live with
that.
|
|
Before MultiArch implicits weren't a thing, so they were hidden by
default by definition. Adding them for MultiArch solved many problems,
but having no reliable way of detecting which dependency (and provides)
is implicit or not causes problems everytime we want to output
dependencies without confusing our observers with unneeded
implementation details.
The really notworthy point here is actually that we keep now a better
record of how a dependency came to be so that we can later reason about
it more easily, but that is hidden so deep down in the library internals
that change is more the problems it solves than the change itself.
|
|
We store very few flags in the cache, so keeping storage space for 8 is
enough for all of them and still leaves a few unused bits remaining for
future extensions without wasting bytes for nothing.
Git-Dch: Ignore
|
|
We aren't and we will not be really compatible again with the previous
stable abi, so lets drop these markers (which never made it into a
released version) for good as they have outlived their intend already.
Git-Dch: Ignore
|
|
Having dependency data separated from the link between version/package
and the dependency allows use to work on sharing the depdency data a bit
as it turns out that many dependencies are in fact duplicates. How many
are duplicates various heavily with the sources configured, but for a
single Debian release the ballpark is 2 duplicates for each dependency
already (e.g. libc6 counts 18410 dependencies, but only 45 unique). Add
more releases and the duplicates count only rises to get ~6 for 3
releases. For each architecture a user has configured which given the
shear number of dependencies amounts to MBs of duplication.
We can cut down on this number, but pay a heavy price for it: In my
many releases(3) + architectures(3) test we have a 10% (~ 0.5 sec)
increase in cache creationtime, but also 10% less cachesize (~ 10 MB).
Further work is needed to rip the whole benefits from this through, so
this is just the start.
Git-Dch: Ignore
|
|
DepCache functions are called a lot, so if we can squeeze some drops out
of them for free we should do so. Takes also the opportunity to remove
some whitespace errors from these functions.
Git-Dch: Ignore
|
|
With a bit of trickery and the Curiously recurring template pattern we
can free us from our use of virtual in the iterators were it is unneeded
bloat as we never deal with pointers to iterators and similar such.
Git-Dch: Ignore
|
|
Doing this disables the implicit copy assignment operator (among others)
which would cause hovac if used on the classes as it would just copy the
pointer, not the data the d-pointer points to. For most of the classes
we don't need a copy assignment operator anyway and in many classes it
was broken before as many contain a pointer of some sort.
Only for our Cacheset Container interfaces we define an explicit copy
assignment operator which could later be implemented to copy the data
from one d-pointer to the other if we need it.
Git-Dch: Ignore
|
|
To have a chance to keep the ABI for a while we need all three to team
up. One of them missing and we might loose, so ensuring that they are
available is a very tedious but needed task once in a while.
Git-Dch: Ignore
|
|
We used to read the Release file for each Packages file and store the
data in the PackageFile struct even through potentially many Packages
(and Translation-*) files could use the same data. The point of the
exercise isn't the duplicated data through. Having the Release files as
first-class citizens in the Cache allows us to properly track their
state as well as allows us to use the information also for files which
aren't in the cache, but where we know to which Release file they
belong (Sources are an example for this).
This modifies the pkgCache structs, especially the PackagesFile struct
which depending on how libapt users access the data in these structs can
mean huge breakage or no visible change. As a single data point:
aptitude seems to be fine with this. Even if there is breakage it is
trivial to fix in a backportable way while avoiding breakage for
everyone would be a huge pain for us.
Note that not all PackageFile structs have a corresponding ReleaseFile.
In particular the dpkg/status file as well as *.deb files have not. As
these have only a Archive property need, the Component property takes
over this duty and the ReleaseFile remains zero. This is also the reason
why it isn't needed nor particularily recommended to change from
PackagesFile to ReleaseFile blindly. Sticking with the earlier is
usually the better option.
|
|
Conflicts:
apt-pkg/pkgcache.h
debian/changelog
methods/https.cc
methods/server.cc
test/integration/test-apt-download-progress
|
|
The fix for #777760 causes packages of foreign (and the native)
architectures, to be created correctly, but invalidates (like the
previously existing, but policy-forbidden architecture-less packages
we had to support for some upgrade scenarios) the assumption that the
first (and only) package in the cache for a single architecture system
must be the package for the native architecture (as, where should the
other architectures come from, right? Wrong.).
Depending on the order of parsing sources more or less packages can be
effected by this. The effects are strange (for apt it mostly effects
simulation/debug output, but also apt-mark on these specific packages),
which complicates debugging, but relatively harmless if understood as
most actions do not need direct named access to packages.
The problem is fixed by removing the single-arch special casing in the
paths who had them (Cache.FindPkg), so they use the same code as
multi-arch systems, which use them as a wrapper for Grp.FindPkg.
Note that single-arch system code was using Grp.FindPkg before as well
if a Grp structure was handily available, so we don't introduce new
untested code here: We remove more brittle special cases which are less
tested instead (this was planed to be done for Stretch anyhow).
Note further that the method with the assumption itself isn't fixed. As
it is a private method I opted for declaring it deprecated instead and
remove all its call positions. As it is private no-one can call this
method legally (thanks to how c++ works by default its still an exported
symbol through) and fixing it basically means reimplementing code we
already have in Grp.FindPkg.
Removing rather than fixing seems hence like a good solution.
Closes: 782777
Thanks: Axel Beckert for testing
|
|
|
|
A version belongs to a section and has hence a section member of its
own. A package on the other hand can have multiple versions from
different sections. This was "solved" by using the section which was
parsed first as order of sources.list defines, but that is obviously a
horribly unpredictable thing.
Users are way better of with the Section() as returned by the version
they are dealing with. It is likely the same for all versions of a
package, but in the few cases it isn't, it is important (like packages
moving from main/* to contrib/* or into oldlibs …).
Backport of 7a66977 which actually instantly removes the member.
|
|
The change itself is no problem ABI wise, but the remove of the old
undynamic hashtables is, so we bring it back for older abis and happily
use the now available free space to backport more recent additions like
the dynamic hashtable itself.
Git-Dch: Ignore
|
|
Reported-By: cppcheck
Git-Dch: Ignore
|
|
Strings like Section names or architectures are needed vary often.
Instead of writing them each time we need them, we deploy sharing for
these special strings. Until now, this was done with a linked list of
strings in which we would search, which was stored in the cache.
It turns out we can do this just as well in memory as well with a bunch
of std::map's.
In memory means here that it isn't available anymore if we have a partly
invalid cache, but that isn't much of a problem in practice as the
status file is compared to the other files we parse very small and includes
mostly duplicates, so the space we would gain by storing is more or less
equal to the size of the stored linked list…
|
|
Commit aa0fe657e46b87cc692895a36df12e8b74bb27bb sorts the package names
in the hashtable. We make use of this already in these functions, but as
a minor sideeffect it also means that we don't have 'noise' anymore
between packages belonging to the same group. We therefore don't need to
check for a matching name in Grp.FindPkg anymore.
Git-Dch: Ignore
|
|
Package names have to be lowercase (debian-policy §5.6.1) and in as
lowlevel as these method are it would be quiet strange to treat an
invalid package "suddently" as a valid one which other tools might or
might not accept. If case-insensitivity is really needed the frontend
should ensure this rather than these methods waste cpu cycles by
default.
Git-Dch: Ignore
|
|
They both store the same information, so this field just takes up space
in the Package struct for no good reason. We mark it "just" as deprecated
instead of instantly removing it though as it isn't misleading like
Section was and is potentially used in the wild more often.
|
|
A version belongs to a section and has hence a section member of its
own. A package on the other hand can have multiple versions from
different sections. This was "solved" by using the section which was
parsed first as order of sources.list defines, but that is obviously a
horribly unpredictable thing.
We therefore directly remove this struct member to free some space and
mark the access method as deprecated, which is told to return the
section of the 'newest' known version, which is at least predictable,
but possible not what it returned before – but nobody knows.
Users are way better of with the Section() as returned by the version
they are dealing with. It is likely the same for all versions of a
package, but in the few cases it isn't, it is important (like packages
moving from main/* to contrib/* or into oldlibs …).
|
|
We had a wild mixture of (unsigned) int, long and long long here without
much sense, so this commit adds a few typedefs to get some sense in the
typesystem and ensures that a ID isn't sometimes computed as int, stored
as long and compared with a long long… as this could potentially bite us
later on as the size of the archive only increases over time.
|
|
It also makes the size configureable, so it can be adapted in the future
without the need for an abi break - and even by users…
The increase was long overdue as it gives a >10% decrease in runtime of
e.g. 'apt-get check -s'. Some (useless) benchmark with 69933 groups and
187796 packages without a pre-built cache:
time apt-get check -so APT::Cache-HashTableSize=1 → 20m
time apt-get check -so APT::Cache-HashTableSize=1000 → 6,41s
time apt-get check -so APT::Cache-HashTableSize=2000 → 5,64s (old)
time apt-get check -so APT::Cache-HashTableSize=3000 → 5,30s
time apt-get check -so APT::Cache-HashTableSize=5000 → 5,08s
time apt-get check -so APT::Cache-HashTableSize=6000 → 5,05s
time apt-get check -so APT::Cache-HashTableSize=7000 → 5,02s
time apt-get check -so APT::Cache-HashTableSize=8000 → 5,00s
time apt-get check -so APT::Cache-HashTableSize=9000 → 4,98s
time apt-get check -so APT::Cache-HashTableSize=10000 → 4,96s (new)
time apt-get check -so APT::Cache-HashTableSize=15000 → 4,90s
time apt-get check -so APT::Cache-HashTableSize=20000 → 4,86s
time apt-get check -so APT::Cache-HashTableSize=30000 → 4,77s
time apt-get check -so APT::Cache-HashTableSize=40000 → 4,74s
time apt-get check -so APT::Cache-HashTableSize=50000 → 4,73s
time apt-get check -so APT::Cache-HashTableSize=60000 → 4,71s
The gap increases further for operations which have more package
lookups. Factor 5 was chosen as higher values do not provide any
really significant timing advantage anymore compared to the memory
increase in my testing and there is always the possibility to increase
it now if that changes. (also most users will not have 3 releases and
4 architectures in the cache, so theirs will be much smaller and faster).
|
|
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/deb/debmetaindex.h
apt-pkg/pkgcache.cc
test/integration/test-apt-ftparchive-src-cachedb
|
|
This is a internal struct not a external interface so the actual
breakage should be small.
|
|
|
|
Git-Dch: Ignore
Reported-By: gcc
|
|
The cache heavily depends on the architecture(s) it is build for,
especially if you move from single- to multiarch. Adding a new
architecture to dpkg therefore has to be detected and must invalidate
the cache so that we don't operate on incorrect data.
The incorrect data will prevent us from doing otherwise sensible
actions (it doesn't allow bad things to happen) and the recovery is
simple and automatic in most cases, so this hides pretty well and is
also not as serious as it might sound at first.
Closes: 745036
|
|
Git-Dch: Ignore
Reported-By: gcc
|
|
Conflicts:
apt-pkg/cachefilter.h
apt-pkg/contrib/fileutl.cc
apt-pkg/contrib/netrc.h
apt-pkg/deb/debsrcrecords.cc
apt-pkg/init.h
apt-pkg/pkgcache.cc
debian/apt.install.in
debian/changelog
|
|
In #737085 we see that apt can be confused if informations about
versions only differ slightly. This commit adds a way of at least adding
a few more data points with the next abi break to help a bit with it.
Git-Dch: Ignore
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Conflicts:
apt-private/private-list.cc
configure.ac
debian/apt.install.in
debian/changelog
|
|
|
|
Conflicts:
apt-pkg/contrib/strutl.cc
apt-pkg/deb/dpkgpm.cc
configure.ac
debian/changelog
doc/po/apt-doc.pot
po/apt-all.pot
po/ar.po
po/ast.po
po/bg.po
po/bs.po
po/ca.po
po/cs.po
po/cy.po
po/da.po
po/de.po
po/dz.po
po/el.po
po/es.po
po/eu.po
po/fi.po
po/fr.po
po/gl.po
po/hu.po
po/it.po
po/ja.po
po/km.po
po/ko.po
po/ku.po
po/lt.po
po/mr.po
po/nb.po
po/ne.po
po/nl.po
po/nn.po
po/pl.po
po/pt.po
po/pt_BR.po
po/ro.po
po/ru.po
po/sk.po
po/sl.po
po/sv.po
po/th.po
po/tl.po
po/uk.po
po/vi.po
po/zh_CN.po
po/zh_TW.po
test/integration/framework
test/integration/test-bug-602412-dequote-redirect
test/integration/test-ubuntu-bug-346386-apt-get-update-paywall
test/interactive-helper/aptwebserver.cc
test/interactive-helper/makefile
|
|
Adds on top of Version 2 to all displayed version numbers the
architecture as well as the MultiArch flag for consumption by the hooks.
Most of the time the architecture will be the same for both versions
displayed, but packages might change from "all" to "any" (or back)
between versions so we can't display the architecture for packages.
Pseudo-Format for Version 3:
<name> <version> <arch> <m-a-flag> <compare> <version> <arch> <m-a-flag>
Examples:
stuff - - none < 1 amd64 none **CONFIGURE**
libsame 1 i386 same < 2 i386 same **CONFIGURE**
stuff 2 i386 none > 1 i386 none **CONFIGURE**
libsame 2 i386 same > - - none **REMOVE**
toolkit 1 all foreign > - - none **REMOVE**
Closes: #712116
|
|
|
|
- provide DepIterator::IsSatisfied as a nicer shorthand for DepCheck
|
|
* apt-pkg/pkgcache.cc:
- assume sorted hashtable entries for groups/packages
|
|
|
|
- adjust pkgCache::State::VerPriority enum, to match reality
|
|
- ignore negative dependencies applying in the same group for
M-A:same packages on the real package name as self-conflicts
|
|
by introducing a pseudo-architecture 'none' so that the small group of
users with these packages can get right of them without introducing too
much hassle for other users (Closes: #686346)
|
