| Age | Commit message (Collapse) | Author |
|---|
|
This fixes the build on kfreebsd-amd64, and due to the detection
of sse4.2, should also enable the sse4.2 on i386.
|
|
|
|
This is more than twice as fast as adler32, but could be made another
50% faster by calculating crcs for 8 byte blocks in "parallel" (without
data dependency) and then combining them. But that's complicated code.
Reference measurements for hashing the cache 100 times:
adler32=2.46s xxhash64=0.64 xxhash32=1.12
crc32c(this)=1.10 crc32c(opt)=0.44s
|
|
No user visible change expect for some years old changelog entries,
so we don't really need to add a new one for this…
Reported-By: codespell
Gbp-Dch: Ignore
|
|
With the advent of compressed files and especially with in-memory
post-processed files the simple assumptions made in IsOk are no longer
true. Worse, they are at best duplicates of checks performed by the
cache generation (and validation) earlier and isn't used in too many
places. It is hence best to simply get right of these calls instead of
trying to fix them.
|
|
Prompted-by: Jakub Wilk <jwilk@debian.org>
|
|
Shipping 1.6 with major 12 would not allow us to update 1.5.y
in a different way than 1.6.y if we have to without resorting
to minor version hacks. Let's just bump the major instead.
|
|
This makes it easier to see which headers includes what.
The changes were done by running
git grep -l '#\s*include' \
| grep -E '.(cc|h)$' \
| xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/'
To modify all include lines by adding a space, and then running
./git-clang-format.sh.
|
|
We need to be able to update 1.4.y in different ways than later
apt versions, and thus need to bump the major version so there
is no collision in the minor version at some point.
|
|
Most of them in (old) code comments. The two instances of user visible
string changes the po files of the manpages are fixed up as well.
Gbp-Dch: Ignore
Reported-By: spellintian
|
|
This has the effect of significantly reducing actual string
comparisons, and should improve the performance of FindGrp
a bit, although it's hardly measureable (callgrind says it
uses 10% instructions less now).
|
|
This one has some obvious collisions for non-alphabetical characters,
like some control characters also hashing to numbers, but we don't
really have those, and these are hash functions which are not
collision free to begin with.
|
|
We already have two stable series with major version 10, and
the next commits will introduce non-backportable performance
changes that affect the cache algorithms, so we need to bump
the major version now to prevent future problems.
|
|
If the dependency line does not contain spaces in the repository
but does in the dpkg status file (because dpkg normalized the
dependency list), the dpkg line might be longer than the line
in the repository. If it now happens to be longer than 1024
characters, it would be skipped, causing the hashes to be
out of date.
Note that we have to bump the minor cache version again as
this changes the format slightly, and we might get mismatches
with an older src cache otherwise.
Fixes Debian/apt#23
|
|
Needed for the previous change
|
|
The old prettyprinters have only access to the struct they pretty print,
which isn't enough usually as we want to know for a package also a bit
of state information like which version is the candidate.
We therefore need to pull the DepCache into context and hence use a
temporary struct which is printed instead of the iterator itself.
|
|
Otherwise, things will just start failing later down the stack,
because (a) the lazy getters do not check if building was successful
and (b) any further getter call would return the invalid object
anyway.
Also initialize VS in pkgCache to nullptr by default.
Closes: #818628
|
|
This effectively merges branch 'typofixes-vlajos-20150807' of github.com:vlajos/apt
with the following commit:
commit 13cacb3e2e2352ba701e769fc889e3344fabbf7e
Author: Veres Lajos <vlajos@gmail.com>
Date: Sun Aug 9 00:12:53 2015 +0100
typofix - https://github.com/vlajos/misspell_fixer
It has been rebased for a better commit message.
|
|
If the architecture list is empty somehow, fail normally.
LP: #1549819
|
|
In commit a221efc331693f8905da870141756c892911c433 I promoted the source
package name and version to the binary cache for faster access by e.g.
EDSP, but due to changing the interpretation length to soon we always
ignored the version part of the Source field, so that packages ended up
having the binary version as source version – which while usually just
fine it is wrong for binary rebuilds.
Closes: 812492
|
|
Proper debian packages do not contain ':' in the package name, so for
real packages this is a non-issue, but apt itself frequently makes use
of packages with such an illegal name for internal proposes.
Git-Dch: Ignore
|
|
By storing the size of the string in the cache, we can make use of
it when comparing the names in the hashtable in pkgCache::FindGrp.
|
|
This improves performance of the cache generation on my
ARM platform (4x Cortex A15) by about 10% to 20% from
2.35-2.50 to 2.1 seconds.
|
|
This drop the hash table utilization from a high 98%
to acceptable 74% on unstable, and the average bucket length
from 4.6 to 1.8.
This improves performance by about 5%, while increasing
the size of the cache by 0.2 out of 38MB, that is 0.5%.
48481 is a nice number
|
|
Gbp-Dch: ignore
|
|
|
|
On my testing system, consisting of unstable and experimental,
this reduces the average chain from 6.5 to 4.5, and the longest
chain from 17 to 15.
|
|
This helps writing test cases. Also adapt the test case that
expected 64-bit.
Nothing changes performance wise, the distribution of the hash
values remains intact.
|
|
With the package names now normalized to lower case, the caches
of affected systems need to be rebuild. Adjust the minor version
to trigger such a rebuild.
Gbp-Dch: ignore
|
|
required and important were swapped, leading to wrong
output.
Closes: #807523
Thanks: Manuel A. Fernandez Montecelo for discovering this
|
|
These assumptions were once true, but they aren't anymore, so what is
supposed to be a speed up is effectively a slowdown [not that it would
be noticible].
Usage of SingleArchFindPkg was nuked in a stable update already as the
included assumption was actually harmful btw, which is why we should get
right of other 'non-harmful' but still untrue assumptions while we can.
Git-Dch: Ignore
|
|
How the Multi-Arch field and pkg:<arch> dependencies interact was
discussed at DebConf15 in the "MultiArch BoF". dpkg and apt (among other
tools like dose) had a different interpretation in certain scenarios
which we resolved by agreeing on dpkg view – and this commit realizes
this agreement in code.
As was the case so far libapt sticks to the idea of trying to hide
MultiArch as much as possible from individual frontends and instead
translates it to good old SingleArch. There are certainly situations
which can be improved in frontends if they know that MultiArch is upon
them, but these are improvements – not necessary changes needed
to unbreak a frontend.
The implementation idea is simple: If we parse a dependency on foo:amd64
the dependency is formed on a package 'foo:amd64' of arch 'any'. This
package is provided by package 'foo' of arch 'amd64', but not by 'foo'
of arch 'i386'. Both of those foo packages provide each other through
(assuming foo is M-A:foreign) to allow a dependency on 'foo' to be
satisfied by either foo of amd64 or i386. Packages can also declare to
provide 'foo:amd64' which is translated to providing 'foo:amd64:any' as
well.
This indirection over provides was chosen as the alternative would be to
teach dependency resolvers how to deal with architecture specific
dependencies – which violates the design idea of avoiding resolver
changes, especially as architecture-specific dependencies are a
cornercase with quite a few subtil rules. Handling it all over versioned
provides as we already did for M-A in general seems much simpler as it
just works for them.
This switch to :any has actually a "surprising" benefit as well: Even
frontends showing a package name via .Name() [which doesn't show the
architecture] will display the "architecture" for dependencies in which
it was explicitely requested, while we will not show the 'strange' :any
arch in FullName(true) [= pretty-print] either. Before you had to
specialcase these and by default you wouldn't get these details shown.
The only identifiable disadvantage is that this complicates error
reporting and handling. apt-get's ShowBroken has existing problems with
virtual packages [it just shows the name without any reason], so that
has to be worked on eventually. The other case is that detecting if a
package is completely unknown or if it was at least referenced somewhere
needs to acount for this "split" – not that it makes a practical
difference which error is shown… but its one of the improvements
possible.
|
|
Previously we had python:any:amd64, python:any:i386, … in the cache and
the dependencies of an amd64 package would be on python:any:amd64, of an
i386 on python:any:i386 and so on. That seems like a relatively
pointless endeavor given that they will all be provided by the same
packages and therefore also a waste of space.
Git-Dch: Ignore
|
|
|
|
Now that we can dynamically create dependencies and provides as needed
rather than requiring to know with which architectures we will deal
before running we can allow the listparser to parse all records rather
than skipping records of "unknown" architectures.
This can e.g. happen if a user has foreign architecture packages in his
status file without dpkg knowing about this architecture (or apt
configured in this way).
A sideeffect is that now arch:all packages are (correctly) recorded as
available from any Packages file, not just from the native one – which
has its downsides for the resolver as mixed-arch source packages can
appear in different architectures at different times, but that is the
problem of the resolver and dealing with it in the parser is at best a
hack (and also depends on a helpful repository).
Another sideeffect is that his allows :none packages to appear in
Packages files again as we don't do any kind of checks now, but given
that they aren't really supported (anymore) by anyone we can live with
that.
|
|
Before MultiArch implicits weren't a thing, so they were hidden by
default by definition. Adding them for MultiArch solved many problems,
but having no reliable way of detecting which dependency (and provides)
is implicit or not causes problems everytime we want to output
dependencies without confusing our observers with unneeded
implementation details.
The really notworthy point here is actually that we keep now a better
record of how a dependency came to be so that we can later reason about
it more easily, but that is hidden so deep down in the library internals
that change is more the problems it solves than the change itself.
|
|
We store very few flags in the cache, so keeping storage space for 8 is
enough for all of them and still leaves a few unused bits remaining for
future extensions without wasting bytes for nothing.
Git-Dch: Ignore
|
|
We aren't and we will not be really compatible again with the previous
stable abi, so lets drop these markers (which never made it into a
released version) for good as they have outlived their intend already.
Git-Dch: Ignore
|
|
Having dependency data separated from the link between version/package
and the dependency allows use to work on sharing the depdency data a bit
as it turns out that many dependencies are in fact duplicates. How many
are duplicates various heavily with the sources configured, but for a
single Debian release the ballpark is 2 duplicates for each dependency
already (e.g. libc6 counts 18410 dependencies, but only 45 unique). Add
more releases and the duplicates count only rises to get ~6 for 3
releases. For each architecture a user has configured which given the
shear number of dependencies amounts to MBs of duplication.
We can cut down on this number, but pay a heavy price for it: In my
many releases(3) + architectures(3) test we have a 10% (~ 0.5 sec)
increase in cache creationtime, but also 10% less cachesize (~ 10 MB).
Further work is needed to rip the whole benefits from this through, so
this is just the start.
Git-Dch: Ignore
|
|
DepCache functions are called a lot, so if we can squeeze some drops out
of them for free we should do so. Takes also the opportunity to remove
some whitespace errors from these functions.
Git-Dch: Ignore
|
|
With a bit of trickery and the Curiously recurring template pattern we
can free us from our use of virtual in the iterators were it is unneeded
bloat as we never deal with pointers to iterators and similar such.
Git-Dch: Ignore
|
|
Doing this disables the implicit copy assignment operator (among others)
which would cause hovac if used on the classes as it would just copy the
pointer, not the data the d-pointer points to. For most of the classes
we don't need a copy assignment operator anyway and in many classes it
was broken before as many contain a pointer of some sort.
Only for our Cacheset Container interfaces we define an explicit copy
assignment operator which could later be implemented to copy the data
from one d-pointer to the other if we need it.
Git-Dch: Ignore
|
|
To have a chance to keep the ABI for a while we need all three to team
up. One of them missing and we might loose, so ensuring that they are
available is a very tedious but needed task once in a while.
Git-Dch: Ignore
|
|
We used to read the Release file for each Packages file and store the
data in the PackageFile struct even through potentially many Packages
(and Translation-*) files could use the same data. The point of the
exercise isn't the duplicated data through. Having the Release files as
first-class citizens in the Cache allows us to properly track their
state as well as allows us to use the information also for files which
aren't in the cache, but where we know to which Release file they
belong (Sources are an example for this).
This modifies the pkgCache structs, especially the PackagesFile struct
which depending on how libapt users access the data in these structs can
mean huge breakage or no visible change. As a single data point:
aptitude seems to be fine with this. Even if there is breakage it is
trivial to fix in a backportable way while avoiding breakage for
everyone would be a huge pain for us.
Note that not all PackageFile structs have a corresponding ReleaseFile.
In particular the dpkg/status file as well as *.deb files have not. As
these have only a Archive property need, the Component property takes
over this duty and the ReleaseFile remains zero. This is also the reason
why it isn't needed nor particularily recommended to change from
PackagesFile to ReleaseFile blindly. Sticking with the earlier is
usually the better option.
|
|
Conflicts:
apt-pkg/pkgcache.h
debian/changelog
methods/https.cc
methods/server.cc
test/integration/test-apt-download-progress
|
|
The fix for #777760 causes packages of foreign (and the native)
architectures, to be created correctly, but invalidates (like the
previously existing, but policy-forbidden architecture-less packages
we had to support for some upgrade scenarios) the assumption that the
first (and only) package in the cache for a single architecture system
must be the package for the native architecture (as, where should the
other architectures come from, right? Wrong.).
Depending on the order of parsing sources more or less packages can be
effected by this. The effects are strange (for apt it mostly effects
simulation/debug output, but also apt-mark on these specific packages),
which complicates debugging, but relatively harmless if understood as
most actions do not need direct named access to packages.
The problem is fixed by removing the single-arch special casing in the
paths who had them (Cache.FindPkg), so they use the same code as
multi-arch systems, which use them as a wrapper for Grp.FindPkg.
Note that single-arch system code was using Grp.FindPkg before as well
if a Grp structure was handily available, so we don't introduce new
untested code here: We remove more brittle special cases which are less
tested instead (this was planed to be done for Stretch anyhow).
Note further that the method with the assumption itself isn't fixed. As
it is a private method I opted for declaring it deprecated instead and
remove all its call positions. As it is private no-one can call this
method legally (thanks to how c++ works by default its still an exported
symbol through) and fixing it basically means reimplementing code we
already have in Grp.FindPkg.
Removing rather than fixing seems hence like a good solution.
Closes: 782777
Thanks: Axel Beckert for testing
|
|
|
|
A version belongs to a section and has hence a section member of its
own. A package on the other hand can have multiple versions from
different sections. This was "solved" by using the section which was
parsed first as order of sources.list defines, but that is obviously a
horribly unpredictable thing.
Users are way better of with the Section() as returned by the version
they are dealing with. It is likely the same for all versions of a
package, but in the few cases it isn't, it is important (like packages
moving from main/* to contrib/* or into oldlibs …).
Backport of 7a66977 which actually instantly removes the member.
|
|
The change itself is no problem ABI wise, but the remove of the old
undynamic hashtables is, so we bring it back for older abis and happily
use the now available free space to backport more recent additions like
the dynamic hashtable itself.
Git-Dch: Ignore
|
|
Reported-By: cppcheck
Git-Dch: Ignore
|
