| Age | Commit message (Collapse) | Author |
|---|
|
Git-Dch: Ignore
|
|
|
|
The code was never active in production, it just sits there collecting
dust and given that it is never tested probably doesn't even work
anymore the way it was supposed to be (whatever that was exactly in the
first place). So just remove it before I have to "fix" it again next
time.
Git-Dch: Ignore
|
|
Trade deduplication of code for a bunch of new virtuals, so it is
actually visible how the different indexes behave cleaning up the
interface at large in the process.
Git-Dch: Ignore
|
|
Sources are usually defined in sources.list (and co) and are pretty
stable, but once in a while a frontend might want to add an additional
"source" like a local .deb file to install this package (No support for
'real' sources being added this way as this is a multistep process).
We had a hack in place to allow apt-get and apt to pull this of for a
short while now, but other frontends are either left in the cold by this
and/or the code for it looks dirty with FIXMEs plastering it and has on
top of this also some problems (like including these 'volatile' sources
in the srcpkgcache.bin file).
So the biggest part in this commit is actually the rewrite of the cache
generation as it is now potentially a three step process. The biggest
problem with adding support now through is that this makes a bunch of
previously mostly unusable by externs and therefore hidden classes
public, so a bit of further tuneing on this now public API is in order…
|
|
Now that we deal with provides in a more dynamic fashion the last
remaining problem is explicit dependencies like 'Conflicts: foo' which
have to apply to all architectures, but creating them all at the same
time requires us to know all architectures ending up in the cache which
isn't needed to be the same set as all foreign architectures.
The effect is visible already now through as this prevents the creation
of a bunch of virtual packages for arch:all packages and as such also
many dependencies, just not very visible if you don't look at the stats…
Git-Dch Ignore
|
|
Expecting the worst is easy to code, but has its disadvantages e.g.
by creating package structures which otherwise would have never
existed. By creating the provides instead at the time a package
structure is added we are well prepared for the introduction of partial
architectures, massive amounts of M-A:foreign (and :allowed) and co as
far as provides are concerned at least. We have something relatively
similar for dependencies already.
Many tests are added for both M-A states and the code cleaned to
properly support implicit provides for foreign architectures and
architectures we 'just' happen to parse.
Git-Dch: Ignore
|
|
Before MultiArch implicits weren't a thing, so they were hidden by
default by definition. Adding them for MultiArch solved many problems,
but having no reliable way of detecting which dependency (and provides)
is implicit or not causes problems everytime we want to output
dependencies without confusing our observers with unneeded
implementation details.
The really notworthy point here is actually that we keep now a better
record of how a dependency came to be so that we can later reason about
it more easily, but that is hidden so deep down in the library internals
that change is more the problems it solves than the change itself.
|
|
Doing this disables the implicit copy assignment operator (among others)
which would cause hovac if used on the classes as it would just copy the
pointer, not the data the d-pointer points to. For most of the classes
we don't need a copy assignment operator anyway and in many classes it
was broken before as many contain a pointer of some sort.
Only for our Cacheset Container interfaces we define an explicit copy
assignment operator which could later be implemented to copy the data
from one d-pointer to the other if we need it.
Git-Dch: Ignore
|
|
Some of them modify the ABI, but given that we prepare a big one
already, these few hardly count for much.
Git-Dch: Ignore
|
|
To have a chance to keep the ABI for a while we need all three to team
up. One of them missing and we might loose, so ensuring that they are
available is a very tedious but needed task once in a while.
Git-Dch: Ignore
|
|
This is mainly visible in the policy, so that you can now pin by b= and
let it only effect Packages files of this architecture and hence the
packages coming from it (which do not need to be from this architecture,
but very likely are in a normal repository setup).
If you should pin by architecture in this way is a different question…
Closes: 687255
|
|
We used to read the Release file for each Packages file and store the
data in the PackageFile struct even through potentially many Packages
(and Translation-*) files could use the same data. The point of the
exercise isn't the duplicated data through. Having the Release files as
first-class citizens in the Cache allows us to properly track their
state as well as allows us to use the information also for files which
aren't in the cache, but where we know to which Release file they
belong (Sources are an example for this).
This modifies the pkgCache structs, especially the PackagesFile struct
which depending on how libapt users access the data in these structs can
mean huge breakage or no visible change. As a single data point:
aptitude seems to be fine with this. Even if there is breakage it is
trivial to fix in a backportable way while avoiding breakage for
everyone would be a huge pain for us.
Note that not all PackageFile structs have a corresponding ReleaseFile.
In particular the dpkg/status file as well as *.deb files have not. As
these have only a Archive property need, the Component property takes
over this duty and the ReleaseFile remains zero. This is also the reason
why it isn't needed nor particularily recommended to change from
PackagesFile to ReleaseFile blindly. Sticking with the earlier is
usually the better option.
|
|
We have a bunch of classes which are of no use for the outside world,
but were still exported and so needed to preserve ABI/API. Marking them
as hidden to not export them any longer is a big API break in theory,
but in practice nobody is using them – as if they would its a bug.
|
|
Git-Dch: Ignore
|
|
aptitude has a define for VERSION, so to not generate a FTBFS we just
rename our enum element to a slightly less generic name.
Git-Dch: Ignore
|
|
Reported-By: cppcheck
Git-Dch: Ignore
|
|
Strings like Section names or architectures are needed vary often.
Instead of writing them each time we need them, we deploy sharing for
these special strings. Until now, this was done with a linked list of
strings in which we would search, which was stored in the cache.
It turns out we can do this just as well in memory as well with a bunch
of std::map's.
In memory means here that it isn't available anymore if we have a partly
invalid cache, but that isn't much of a problem in practice as the
status file is compared to the other files we parse very small and includes
mostly duplicates, so the space we would gain by storing is more or less
equal to the size of the stored linked list…
|
|
We had a wild mixture of (unsigned) int, long and long long here without
much sense, so this commit adds a few typedefs to get some sense in the
typesystem and ensures that a ID isn't sometimes computed as int, stored
as long and compared with a long long… as this could potentially bite us
later on as the size of the archive only increases over time.
|
|
It seems unlikely for now that proper archives will carry multiple
Description-* stanzas in the Packages (or Translation-*) file, but
sometimes apt eats its own output as shown by the usage of the CD team
and it would be interesting to let apt output multiple translations
e.g. in 'apt-cache show'.
|
|
This methods should not be used by anyone expect the library itself as
they are helpers for the specific class and therefore perfect candidates
for hidding.
Git-Dch: Ignore
|
|
In #737085 we see that apt can be confused if informations about
versions only differ slightly. This commit adds a way of at least adding
a few more data points with the next abi break to help a bit with it.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
to save some space and allow quick comparisions later on
|
|
version strings e.g. for implicit multi-arch dependencies
|
|
struct is created and not at the end of the cache generation
This allows us to be independent from the configured architectures for
these kind of conflicts, we get natural progress for free and
only the needed dependencies are in th respective binary cache.
|
|
- refactor MergeList by creating -Group, -Package and -Version specialist
|
|
|
|
|
|
- use ref-to-ptr semantic in NewDepends() to ensure that the
libapt does not segfault if the cache is remapped in between
(LP: #812862)
|
|
faster and still provides everything we need for the Cache generator
|
|
- add and document APT::Cache-{Start,Grow,Limit} options for mmap control
|
|
- make the used MMap moveable (and therefore dynamic resizeable) by
applying (some) mad pointer magic (Closes: #195018)
|
|
|
|
be able to react on condition changes later then we can move mmap
|
|
- split Open() into submethods to be able to build only parts
- make the OpProgress optional in the Cache buildprocess
|
|
|
|
the information from the parent package now
|
|
for creating the dependencies needed for our groups:
For now for all groups only one package can be installed at the same
time which conflicts with each other packages in the group.
The exceptions are architecture all package.
Also, the Multi-Arch field is now parsed, but not used for now.
|
|
infrastructor for packages.
APT is now aware of the fact that a package A in architecture X can't
satisfy a dependency on package A in architecture Y - to handle these
packages are now identified by name and architecture, so different
architectures of the same package are handled internally as completly
different packages. This is great for pinning, dependency checking and
in many other situations, but sometimes we need to know which archs are
available for a given package: Here Groups come to our rescue!
|
|
|
|
Daniel Burrows, closes: #429378)
* fix FTFBFS by changing build-depends to
libcurl4-gnutls-dev (closes: #428363)
|
|
|
|
|
|
Patches applied:
* apt@packages.debian.org/apt--sources-list-d--0--base-0
tag of apt@packages.debian.org/apt--main--0--patch-30
* apt@packages.debian.org/apt--sources-list-d--0--patch-1
Patch from apt-rpm via Michael Vogt to implement /etc/apt/sources.list.d
* bubulle@debian.org--2005/apt--main--0--patch-130
Galician translation completed
* bubulle@debian.org--2005/apt--main--0--patch-131
Simplified Chinese translation update
* bubulle@debian.org--2005/apt--main--0--patch-132
Completed Simplified Chinese translation
* bubulle@debian.org--2005/apt--main--0--patch-133
Merge with Michael AND update PO files
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-90
* merged the sources.list.d patch
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-91
* merged with bubulle
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-92
* changelog update
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-93
* sources.list.d documented
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-94
* pkgDirStream has (slightly) better extract support now
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-95
* merge fix for #339533
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-96
* merged with bubulle
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-97
* some more debug output
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-98
* ABI change: merged more flexible pkgAcquireFile code
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-99
* merged http download limit for apt (#146877)
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-100
* applied parts of the string speedup patch from debian #319377 (ABI change)
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-101
* fix for #340448
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-102
* finalized this release
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-103
* changelog updates
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-104
* build-depend on libdb4.3 now, fix for kFreeBSD (#317718)
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-105
* fix mailaddress
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-106
* fix a string (thanks to bubulle)
* michael.vogt@ubuntu.com--2005/apt--mvo--0--patch-107
* merged with bubulle
|
|
|
|
|
|
Author: jgg
Date: 2002-07-08 03:13:30 GMT
Gustavo Niemeyer stuff for RPM file depends
|
