| Age | Commit message (Collapse) | Author |
|---|
|
Regression of 14341a7ee1ca3dbcdcdbe10ad19b947ce23d972d.
Reported-By: Julian Andres Klode <jak@debian.org>
|
|
The main part is refactoring through to allow hiding the magic needed to
support .deb files in deeper layers of libapt so that frontends have
less exposure to Debian specific classes like debDebPkgFileIndex.
|
|
This changes the semantics of the option (which is renamed too) to be a
yes/no value with the special additional value "force" as this allows
by-hash to be disabled even if the repository indicates it would be
supported and is more in line with our other yes/no options like pdiff
which disable themselves if no support can be detected.
The feature wasn't documented so far and hasn't reached a (un)stable
release yet, so changing it without trying too hard to keep
compatibility seems okay.
|
|
Our error reporting is historically grown into some kind of mess.
A while ago I implemented stacking for the global error which is used in
this commit now to wrap calls to functions which do not report (all)
errors via return, so that only failures in those calls cause a failure
to propergate down the chain rather than failing if anything
(potentially totally unrelated) has failed at some point in the past.
This way we can avoid stopping the entire acquire process just because a
single source produced an error for example. It also means that after
the acquire process the cache is generated – even if the acquire
process had failures – as we still have the old good data around we can and
should generate a cache for (again).
There are probably more instances of this hiding, but all these looked
like the easiest to work with and fix with reasonable (aka net-positive)
effects.
|
|
Multiple targets downloading the same file is bad™ as it leads us to all
sorts of problems like the acquire system breaking or simply a problem
of which settings to use for them. Beside that this is most likely a
mistake and silently ignoring it doesn't help the user realizing his
mistake…
On the other hand, we have 'duplicates' which are 'created' by how we
create indextargets, so we have to prevent those from being created to
but do not emit a warning for them as this is an implementation detail.
And then, there is the absolute and most likely user mistake: Having the
same target(s) activated in multiple entries.
|
|
Nobody knows what makes the 'unable to optimize loop' warning to appear
in the sourceslist minus-options parsing, especially if we use a foreach
loop, but we can replace it with some nice c++11 algorithm+lambda usage,
which also helps in making even clearer what happens here.
And as this would be a lonely change, lets do it for a few more loops as
well where I might or might not have seen the warning at some point in
time, too.
Git-Dch: Ignore
|
|
Disabling pdiffs can be useful occasionally, like if you have a fast
local mirror where the download doesn't matter, but still want to use it
for non-local mirrors. Also, some users might prefer it to only use it
for very big indextargets like Contents.
|
|
Also support vertical tabs, as isspace() does the same.
Closes: #796067
|
|
It complained about the previous code:
apt-pkg/sourcelist.cc: In destructor ‘pkgSourceList::~pkgSourceList()’:
apt-pkg/sourcelist.cc:278:4: warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
for (pkgIndexFile * const File : VolatileFiles)
^
There really cannot be an overflow, though. Rewriting it like this
seems to fix it.
|
|
Sources are usually defined in sources.list (and co) and are pretty
stable, but once in a while a frontend might want to add an additional
"source" like a local .deb file to install this package (No support for
'real' sources being added this way as this is a multistep process).
We had a hack in place to allow apt-get and apt to pull this of for a
short while now, but other frontends are either left in the cold by this
and/or the code for it looks dirty with FIXMEs plastering it and has on
top of this also some problems (like including these 'volatile' sources
in the srcpkgcache.bin file).
So the biggest part in this commit is actually the rewrite of the cache
generation as it is now potentially a three step process. The biggest
problem with adding support now through is that this makes a bunch of
previously mostly unusable by externs and therefore hidden classes
public, so a bit of further tuneing on this now public API is in order…
|
|
Limits which key(s) can be used to sign a repository. Not immensely useful
from a security perspective all by itself, but if the user has
additional measures in place to confine a repository (like pinning) an
attacker who gets the key for such a repository is limited to its
potential and can't use the key to sign its attacks for an other (maybe
less limited) repository… (yes, this is as weak as it sounds, but having
the capability might come in handy for implementing other stuff later).
|
|
These options could be set via configuration before, but the connection
to the actual sources is so strong that they should really be set in the
sources.list instead – especially as this can be done a lot more
specific rather than e.g. disabling Valid-Until for all sources at once.
Valid-Until-* names are chosen instead of the Min/Max-ValidTime as this
seems like a better name and their use in the wild is probably low
enough that this isn't going to confuse anyone if we have to names for
the same thing in different areas.
In the longrun, the config options should be removed, but for now
documentation hinting at the new options is good enough as these are the
kind of options you set once across many systems with different apt
versions, so the new way should work everywhere first before we
deprecate the old way.
|
|
indexRecords was used to parse the Release file – mostly the hashes –
while metaIndex deals with downloading the Release file, storing all
indexes coming from this release and … parsing the Release file, but
this time mostly for the other fields.
That wasn't a problem in metaIndex as this was done in the type specific
subclass, but indexRecords while allowing to override the parsing method
did expect by default a specific format.
APT isn't really supporting different types at the moment, but this is
a violation of the abstraction we have everywhere else and, which is the
actual reason for this merge: Options e.g. coming from the sources.list
come to metaIndex naturally, which needs to wrap them up and bring them
into indexRecords, so the acquire system is told about it as they don't
get to see the metaIndex, but they don't really belong in indexRecords
as this is just for storing data loaded from the Release file… the
result is a complete mess.
I am not saying it is a lot prettier after the merge, but at least
adding new options is now slightly easier and there is just one place
responsible for parsing the Release file. That can't hurt.
|
|
Having two different formats in the same file is very dirty and causes
external tools to fail hard trying to parse them. It is probably not a
good idea for them to parse them in the first place, but they do and we
shouldn't break them if there is a better way.
So we solve this issue for now by giving our deb822 format a new
filename extension ".sources" which unsupporting applications are likely
to ignore an can begin gradually moving forward rather than waiting for
the unknown applications to catch up.
Currently and for the forseeable future apt is going to support both
with the same feature set as documented in the manpage, with the
longtime plan of adopting the 'new' format as default, but that is a
long way to go and might get going more from having an easier time
setting options than from us pushing it explicitely.
|
|
We support arch= for a while, now we finally add lang= as well and as a
first simple way of controlling which targets to acquire also target=.
This asked for a redesign of the internal API of parsing and storing
information about 'deb' and 'deb-src' lines. As this API isn't visible
to the outside no damage done through.
Beside being a nice cleanup (= it actually does more in less lines) it
also provides us with a predictable order of architectures as provides
in the configuration rather than based on string sorting-order, so that
now the native architecture is parsed/displayed first. Observeable e.g.
in apt-get output.
|
|
Doing this disables the implicit copy assignment operator (among others)
which would cause hovac if used on the classes as it would just copy the
pointer, not the data the d-pointer points to. For most of the classes
we don't need a copy assignment operator anyway and in many classes it
was broken before as many contain a pointer of some sort.
Only for our Cacheset Container interfaces we define an explicit copy
assignment operator which could later be implemented to copy the data
from one d-pointer to the other if we need it.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
Reported-By: cppcheck
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Have a similar ParseStanza() to the current ParseLine().
Rename the Architectures options in deb822 to make it more
user friendly
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- fix segfault when a hostname contains a [, thanks to
Tzafrir Cohen (closes: #704653)
|
|
initialized in the constructor." messages (no functional change)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
done on the mirco-optimazation level, so lets fix them:
(performance) Possible inefficient checking for emptiness.
(performance) Prefer prefix ++/-- operators for non-primitive types.
|
|
exists, so test before using that
|
