| Age | Commit message (Collapse) | Author |
|---|
|
The mountpoint might be auto-generated by the mount command so pushing
an error on the stack will confuse the following code and let it believe
an unrecoverable error occured while potentially everything is okay.
Same goes for umount as a non-existing mountpoint is by definition not
mounted.
|
|
Checking that parent-directory of mountpoint and mountpoint are on
different devices is fine most of the time, but is too restrictive
for our testcases and there shouldn't be anything wrong with 'normal'
users copying disk-contents around either if they want to.
We check for the existance of the ".disk/" directory now as this will
not be present if the disk isn't 'mounted'. Disks doesn't need to have
such a directory through, so for those we fall back to the old way of
detecting mounted or not mounted.
|
|
The unpack of a M-A:same package will force the unpack of all its
siblings directly to prevent that they could be separated by later
immediate actions. In commit 634985f8 a call to SmartConfigure was
introduced to configure these packages at the time the installation
order encounters them. Usually, the unpack order is already okay, so
that this 'earlier' unpack was not needed and if it wouldn't have been
done, the package would now only be unpacked, but by configuring the package
now we impose new requirements which must be satisfied. The code is
clever enough to handle this most of the time (it worked for 2 years!),
but it isn't needed and in very coupled cases this can fail.
Removing this call again removes this extra burden and so simplifies the
ordering as can be seen in the modified tests. Famous last words, but I
don't see a reason for this extra burden to exist hence the remove.
Closes: 740843
|
|
Git-Dch: Ignore
Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
also adds namespaced attributes for good usage
Git-Dch: Ignore
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
Reported-By: gcc -Wignored-qualifiers
Git-Dch: Ignore
|
|
[-Wunsafe-loop-optimizations]
Git-Dch: Ignore
Reported-By: gcc -Wunsafe-loop-optimizations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wmissing-declarations
|
|
Git-Dch: Ignore
Reported-By: gcc -Wuseless-cast
|
|
Git-Dch: Ignore
Reported-By: gcc -Wcast-qual
|
|
Git-Dch: Ignore
Reported-By: gcc -Wpedantic
|
|
Reported-By: gcc
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Inspired by the rest of the patch in 661537, but abstract the
parsing of various ways of setting the build profiles more so it can
potentially be reused and all apt parts have the same behaviour.
Especially config options, cmdline options and environment will not be
combined as proposed as this isn't APTs usual behaviour and dpkg doesn't
do it either, so one overrides the other as it normally does.
|
|
Build-dependencies are now able to include a <profile.foo …>
specification limiting usage similar to already supported [arch …].
More details: https://wiki.debian.org/BuildProfileSpec
Closes: 661537
|
|
Automatically handle the override of list options via its parent value
which can even be a comma-separated list of values. It also adds an easy
way of providing a default for the list.
|
|
Prevents that "old" dependencies have an influence in the scoring.
With positive dependencies this is usually not a problem, but negative
dependencies can linger around for a long time.
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
versioned -dev packages like db and boost have the problem of no
dependencies which would give them a competitive advantage against an
older incarnation of the -dev package, so they tend to be kept back
until the old version is removed from the archive, which, if the user
has older releases in its sources can take a long time (or never happens).
The newer version has a conflicts/breaks against the older one, but the
older one hasn't against the newer, so by giving via the conflicts the
older one a reduced score the newer one can win if there is no other
reason to keep it. If both have a conflict against each other the
scoring will cancel itself out, so no harm done.
This gives "action" a slightly bigger edge in breaks/conflicts cases
than before, but holding back isn't a really good solution anyway.
|
|
|
|
|
|
|
|
The current PackageContainerInterface::FromString() will do a
FromFnmatch() first and then FromRegEx(). This commit reverts
that change to restore the old behavior to only look for RegEx
and not glob-style pattern. The rational is that:
a) currently a fnmatch() is misleadingly reported as a regex match to
the user (Bug#738880)
b) a fnmatch may match something different than a a RegEx so the
change broke a published interface
|
|
|
|
Commit 6008b79adf1d7ea5607fab87a355d664c8725026 should have been guarded
by "Git-Dch: Ignore", but it wasn't and I only noticed it with the Close
message via deity thinking "hehe, I wonder if someone is gonna notice".
Looks like someone did: hats off to reddit user itisOmegakai!
Good to know that what I do isn't only monitored by goverments. :)
As there is another instance of basically the same code we just factor
out the code a bit and reuse, so its even cleaner and not only simpler.
Reported-By: scan-build
|
|
switch protocols at random is a bad idea if e.g. http can switch to
file, so we limit the possibilities to http to http and http to https.
As very few people (less than 1% according to popcon) have https
installed this likely changes nothing in terms of failure. The commit is
adding a friendly hint which package needs to be installed though.
|
|
Git-Dch: Ignore
|
|
If there are multiple CD-ROM drives, `apt-cdrom add` will abort with an
error if any of the drives do not contain a Debian CD which is against
the documentation we have saying "a CD-ROM" and also scripts do not
expect it this way.
This patch modifies apt-cdrom to return success if any of the drives
succeeded. If failures occur, apt-cdrom will still continue trying all
the drives and report the last failure (if none of them succeeded).
The 'ident' command was also changed to match the new 'add' behavior.
Closes: 728153
|
|
With APT::Get::List-Cleanup disabled the ed-style patch files are
lingering in the lists/ directory otherwise. That was kinda okay in the
old none-client-merge as the filename was always the same so it was
constantly overridden, but now with different names for client-merge
quiet a few could pill up on the system and are used by the next call
as it picks them up based on the filename.
|
|
|
|
Does the same as before, but is a bit simpler on the logic for humans as
well as compilers. scan-build complained about it at least with:
"Result of operation is garbage or undefined"
Reported-By: scan-build
|
|
|
|
If a (Pre-)Depends can't be satisfied there is no point in keeping the
candidate as is as it is impossible to find a solution for it, so we can
just as well reset the candidate to the currently installed version.
We avoid trying to install this impossible candidate later on this way.
Closes: #735967
|
|
When checking for negative dependencies in MarkInstall() ensure that
only dependencies that are relevant (i.e. getting installed) are
checked.
|
|
The offset variable in DebSrcRecordParser was not initialized which we
now do and based on it do not trigger a restart if the parser was not
used yet avoiding a needless rescan of the section.
Detected while working on the previous commit e62aa1dd. Both commits act
as a "fix" for the bug shown in the testcase of the commit – this one
here would only hide it through.
|
|
Asking for more via Step() will notice that we are done with the file
already and will result in a fail, which means we can't find the last
sections anymore (which is especially painful if we haven't moved at
all as in the testcase we haven't even looked at one of the sources
leading to a strange behaviour)
Reported-By: Niall Walsh <niallwalsh@users.berlios.de>
|
|
Conflicts:
apt-private/private-list.cc
doc/po/de.po
test/integration/framework
|
|
|
|
|
|
|
|
debian/experimental-no-abi-break
Conflicts:
apt-private/private-cmndline.cc
|
|
The size/installed-size is displayed via SizeToStr() and Size
is rewriten to "Download-Size" to make clear what size is refered
to here.
|
|
into feature/source-deb822
Conflicts:
test/integration/test-apt-sources-deb822
|
|
|
|
|
|
|
|
Show a proper error message when a ioctl() in dpkgpm.cc fails.
Also simply StartPtyMagic() a bit.
|
