| Age | Commit message (Collapse) | Author |
|---|
|
History suggests that this comes from an earlier apt-secure
implementation, but never really became a thing, totally unused and
marked as deprecated for "ages" now. Especially as it did nothing even
if it would have been used (libapt itself didn't use it at all).
|
|
Limits which key(s) can be used to sign a repository. Not immensely useful
from a security perspective all by itself, but if the user has
additional measures in place to confine a repository (like pinning) an
attacker who gets the key for such a repository is limited to its
potential and can't use the key to sign its attacks for an other (maybe
less limited) repository… (yes, this is as weak as it sounds, but having
the capability might come in handy for implementing other stuff later).
|
|
These options could be set via configuration before, but the connection
to the actual sources is so strong that they should really be set in the
sources.list instead – especially as this can be done a lot more
specific rather than e.g. disabling Valid-Until for all sources at once.
Valid-Until-* names are chosen instead of the Min/Max-ValidTime as this
seems like a better name and their use in the wild is probably low
enough that this isn't going to confuse anyone if we have to names for
the same thing in different areas.
In the longrun, the config options should be removed, but for now
documentation hinting at the new options is good enough as these are the
kind of options you set once across many systems with different apt
versions, so the new way should work everywhere first before we
deprecate the old way.
|
|
indexRecords was used to parse the Release file – mostly the hashes –
while metaIndex deals with downloading the Release file, storing all
indexes coming from this release and … parsing the Release file, but
this time mostly for the other fields.
That wasn't a problem in metaIndex as this was done in the type specific
subclass, but indexRecords while allowing to override the parsing method
did expect by default a specific format.
APT isn't really supporting different types at the moment, but this is
a violation of the abstraction we have everywhere else and, which is the
actual reason for this merge: Options e.g. coming from the sources.list
come to metaIndex naturally, which needs to wrap them up and bring them
into indexRecords, so the acquire system is told about it as they don't
get to see the metaIndex, but they don't really belong in indexRecords
as this is just for storing data loaded from the Release file… the
result is a complete mess.
I am not saying it is a lot prettier after the merge, but at least
adding new options is now slightly easier and there is just one place
responsible for parsing the Release file. That can't hurt.
|
|
A specific trust state can be enforced via a sources.list option, but it
effects all entries handled by the same Release file, not just the entry
it was given on so we enforce acknowledgement of this by requiring the
same value to be (not) set on all such entries.
|
|
Having two different formats in the same file is very dirty and causes
external tools to fail hard trying to parse them. It is probably not a
good idea for them to parse them in the first place, but they do and we
shouldn't break them if there is a better way.
So we solve this issue for now by giving our deb822 format a new
filename extension ".sources" which unsupporting applications are likely
to ignore an can begin gradually moving forward rather than waiting for
the unknown applications to catch up.
Currently and for the forseeable future apt is going to support both
with the same feature set as documented in the manpage, with the
longtime plan of adopting the 'new' format as default, but that is a
long way to go and might get going more from having an easier time
setting options than from us pushing it explicitely.
|
|
We support arch= for a while, now we finally add lang= as well and as a
first simple way of controlling which targets to acquire also target=.
This asked for a redesign of the internal API of parsing and storing
information about 'deb' and 'deb-src' lines. As this API isn't visible
to the outside no damage done through.
Beside being a nice cleanup (= it actually does more in less lines) it
also provides us with a predictable order of architectures as provides
in the configuration rather than based on string sorting-order, so that
now the native architecture is parsed/displayed first. Observeable e.g.
in apt-get output.
|
|
Various small leaks here and there. Nothing particularily big, but still
good to fix. Found by the sanitizers while running our testcases.
Reported-By: gcc -fsanitize
Git-Dch: Ignore
|
|
More warnings are always better.
Git-Dch: Ignore
|
|
The old check is overly complicated nowadays as we have a pretty
defining difference between packages from a Packages files coming
from with a Release file (even if the file itself doesn't exist) and
packages coming from the dpkg.status or directly out of *.deb's
as these have no associated Release file.
Git-Dch: Ignore
|
|
C++11 slightly changes the API again to const_iterator, but we are find
with iterators in the C++03 style for now as long as they look and
behave equally to the methods of the standard containers.
Git-Dch: Ignore
|
|
Doing this disables the implicit copy assignment operator (among others)
which would cause hovac if used on the classes as it would just copy the
pointer, not the data the d-pointer points to. For most of the classes
we don't need a copy assignment operator anyway and in many classes it
was broken before as many contain a pointer of some sort.
Only for our Cacheset Container interfaces we define an explicit copy
assignment operator which could later be implemented to copy the data
from one d-pointer to the other if we need it.
Git-Dch: Ignore
|
|
Some of them modify the ABI, but given that we prepare a big one
already, these few hardly count for much.
Git-Dch: Ignore
|
|
Gbp-Dch: ignore
|
|
This was broken previously, as we'd choose a downgrade when it's
pin was higher than the previously selected candidate.
|
|
The new implementation assigns each version a pin, instead of assigning
the pin to a package. This enables us to give each version of a package
a different priority.
Closes: #770017
Closes: #622237
Closes: #620249
Closes: #685215
|
|
This makes sure that we display a useful value instead of 0 for
versions that are pinned due to package files.
|
|
|
|
Refactor version matching to allow us to check if a version matches
a pin. This will aid the per-version pinning implementation.
|
|
Per-version pins should lead to more predictable results with
/etc/apt/preferences uses like pinning one version with -1.
|
|
To have a chance to keep the ABI for a while we need all three to team
up. One of them missing and we might loose, so ensuring that they are
available is a very tedious but needed task once in a while.
Git-Dch: Ignore
|
|
Progress reports once in a while which is a bit to unpredictable for
testcases, so we enforce a steady progress for them in the hope that
this makes the tests (mostly test-apt-progress-fd) a bit more stable.
Git-Dch: Ignore
|
|
It shouldn't be too common, but sometimes people have multiple mirrors
in the sources or otherwise repositories with the same content. Now that
we gracefully can handle multiple requests to the same URI, we can also
fold multiple requests with the same expected hashes into one. Note that
this isn't trying to find oppertunities for merging, but just merges if
it happens to encounter the oppertunity for it.
This is most obvious in the new testcase actually as it needs to delay
the action to give the acquire system enough time to figure out that
they can be merged.
|
|
Again, consistency is the main sellingpoint here, but this way it is now
also easier to explain that some files move through different stages and
lines are printed for them hence multiple times: That is a bit hard to
believe if the number is changing all the time, but now that it keeps
consistent.
|
|
All other methods call it, so they should follow along even if the work
they do afterwards is hardly breathtaking and usually results in a
URIDone pretty soon, but the acquire system tells the individual item
about this via a virtual method call, so even through none of our
existing items contains any critical code in these, maybe one day they
might. Consistency at least once…
Which is also why this has a good sideeffect: file: and cdrom: requests
appear now in the 'apt-get update' output. Finally - it never made sense
to hide them for me. Okay, I guess it made before the new hit behavior,
but now that you can actually see the difference in an update it makes
sense to see if a file: repository changed or not as well.
|
|
This is an unlikely event for indexes and co, but it can happen quiet
easily e.g. for changelogs where you want to get the changelogs for
multiple binary package(version)s which happen to all be built from a
single source.
The interesting part is that the Acquire system actually detected this
already and set the item requesting the URI again to StatDone - expect
that this is hardly sufficient: an Item must be Complete=true as well
to be considered truely done and that is only the tip of the ::Done
handling iceberg. So instead of this StatDone hack we allow QItems to be
owned by multiple items and notify all owners about everything now,
so that for the point of each item they got it downloaded just for them.
|
|
Provided is a specialized acquire item which given a version can figure
out the correct URI to try by itself and if not provides an error
message alongside with static methods to get just the URI it would try
to download if it should just be displayed or similar such.
The URI is constructed as follows:
Release files can provide an URI template in the "Changelogs" field,
otherwise we lookup a configuration item based on the "Label" or
"Origin" of the Release file to get a (hopefully known) default value
for now. This template should contain the string CHANGEPATH which is
replaced with the information about the version we want the changelog
for (e.g. main/a/apt/apt_1.1). This middleway was choosen as this path
part was consistent over the three known implementations (+1 defunct),
while the rest of the URI varies widely between them.
The benefit of this construct is that it is now easy to get changelogs
for Debian packages on Ubuntu and vice versa – even at the moment where
the Changelogs field is present nowhere. Strictly better than what
apt-get had before as it would even fail to get changelogs from
security… Now it will notice that security identifies as Origin: Debian
and pick this setting (assuming again that no Changelogs field exists).
If on the other hand security would ship its changelogs in a different
location we could set it via the Label option overruling Origin.
Closes: 687147, 739854, 784027, 787190
|
|
Translation-* files are internally handled as PackageFiles which isn't
super nice, but giving them their own struct is a bit overkill so let it
be for the moment. They always appeared in the policy output because of
this through and now that they are properly linked to a ReleaseFile they
even display all the pinning information on them, but they don't contain
any packages which could be pinned… No problem, but useless and
potentially confusing output.
Adding a 'NoPackages' flag which can be set on those files and be used
in applications seems like a simple way to fix this display issue.
|
|
This is mainly visible in the policy, so that you can now pin by b= and
let it only effect Packages files of this architecture and hence the
packages coming from it (which do not need to be from this architecture,
but very likely are in a normal repository setup).
If you should pin by architecture in this way is a different question…
Closes: 687255
|
|
Selecting targets based on the Release they belong to isn't to
unrealistic. In fact, it is assumed to be the most used case so it is
made the default especially as this allows to bundle another thing we
have to be careful with: Filenames and only showing targets we have
acquired.
Closes: 752702
|
|
We used to read the Release file for each Packages file and store the
data in the PackageFile struct even through potentially many Packages
(and Translation-*) files could use the same data. The point of the
exercise isn't the duplicated data through. Having the Release files as
first-class citizens in the Cache allows us to properly track their
state as well as allows us to use the information also for files which
aren't in the cache, but where we know to which Release file they
belong (Sources are an example for this).
This modifies the pkgCache structs, especially the PackagesFile struct
which depending on how libapt users access the data in these structs can
mean huge breakage or no visible change. As a single data point:
aptitude seems to be fine with this. Even if there is breakage it is
trivial to fix in a backportable way while avoiding breakage for
everyone would be a huge pain for us.
Note that not all PackageFile structs have a corresponding ReleaseFile.
In particular the dpkg/status file as well as *.deb files have not. As
these have only a Archive property need, the Component property takes
over this duty and the ReleaseFile remains zero. This is also the reason
why it isn't needed nor particularily recommended to change from
PackagesFile to ReleaseFile blindly. Sticking with the earlier is
usually the better option.
|
|
Downloading additional files is only half the job. We still need a way
to allow external tools to know where the files are they requested for
download given that we don't want them to choose their own location.
'apt-get files' is our answer to this showing by default in a deb822
format information about each IndexTarget with the potential to filter
the records based on lines and an option to change the output format.
The command serves also as an example on how to get to this information
via libapt.
|
|
Strings are easy to typo and we can keep the extensibility we require
here with a simple enum we can append to without endangering ABI.
Git-Dch: Ignore
|
|
Removes a bunch of duplicated code in the deb-specific parts. Especially
the Description part is now handled centrally by IndexTarget instead of
being duplicated to the derivations of IndexFile.
Git-Dch: Ignore
|
|
It is a rather strange sight that index items use SiteOnly which strips
the Path, while e.g. deb files are downloaded with NoUserPassword which
does not. Important to note here is that for the file transport Path is
pretty important as there is no Host which would be displayed by Site,
which always resulted in "interesting" unspecific errors for "file:".
Adding a 'middle' ground between the two which does show the Path but
potentially modifies it (it strips a pending / at the end if existing)
solves this "file:" issue, syncs the output and in the end helps to
identify which file is meant exactly in progress output and co as a
single site can have multiple repositories in different paths.
|
|
We need a general way to get from a sources.list entry to IndexTargets
and with this change we can move from pkgSourceList over the list of
metaIndexes it includes to the IndexTargets each metaIndex can have.
Git-Dch: Ignore
|
|
Creating and passing around a bunch of pointers of IndexTargets (and of
a vector of pointers of IndexTargets) is probably done to avoid the
'costly' copy of container, but we are really not in a timecritical
operation here and move semantics will help us even further in the
future. On the other hand we never do a proper cleanup of these
pointers, which is very dirty, even if structures aren't that big…
The changes will effecting many items only effect our own hidden class,
so we can do that without fearing breaking interfaces or anything.
Git-Dch: Ignore
|
|
We still need an API for the targets, so slowly prepare the IndexTargets
to let them take this job.
Git-Dch: Ignore
|
|
We have two places in the code which need to iterate over targets and do
certain things with it. The first one is actually creating these targets
for download and the second instance pepares certain targets for
reading.
Git-Dch: Ignore
|
|
First pass at making the acquire system capable of downloading files
based on configuration rather than hardcoded entries. It is now possible
to instruct 'deb' and 'deb-src' sources.list lines to download more than
just Packages/Translation-* and Sources files. Details on how to do that
can be found in the included documentation file.
|
|
The code requires every index file we download to have a Package field,
but that doesn't hold true for all index we might want to download in
the future. Some might not even be deb822 formatted files…
The check was needed as apt used to accept unverifiable files like
Translation-*, but nowadays it requires hashes for these as well. Even
for unsigned repositories we interpret the Release file as binding now,
which means this check isn't triggerable expect for repositories which
do not have a Release file at all – something which is highly discouraged!
Git-Dch: Ignore
|
|
If we have a file on disk and the hashes are the same in the new Release
file and the old one we have on disk we know that if we ask the server
for the file, we will at best get an IMS hit – at worse the server
doesn't support this and sends us the (unchanged) file and we have to
run all our checks on it again for nothing. So, we can save ourselves
(and the servers) some unneeded requests if we figure this out on our
own.
|
|
Its a bit unclean to create an item just to let the item decide that it
can't do anything and let it fail, so instead we let the item creator
decide in all cases if patching should be attempted.
Also pulls a small trick to get the hashes for the current file without
calculating them by looking at the 'old' Release file if we have it.
Git-Dch: Ignore
|
|
At the moment we only have hashes for the uncompressed pdiff files, but
via the new '$HASH-Download' field in the .diff/Index hashes can be
provided for the .gz compressed pdiff file, which apt will pick up now
and use to verify the download. Now, we "just" need a buy in from the
creators of repositories…
|
|
rred is responsible for unpacking and reading the patch files in one go,
but we currently only have hashes for the uncompressed patch files, so
the handler read the entire patch file before dispatching it to the
worker which would read it again – both with an implicit uncompress.
Worse, while the workers operate in parallel the handler is the central
orchestration unit, so having it busy with work means the workers do
(potentially) nothing.
This means rred is working with 'untrusted' data, which is bad. Yet,
having the unpack in the handler meant that the untrusted uncompress was
done as root which isn't better either. Now, we have it at least
contained in a binary which we can harden a bit better. In the long run,
we want hashes for the compressed patch files through to be safe.
|
|
Having every item having its own code to verify the file(s) it handles
is an errorprune process and easy to break, especially if items move
through various stages (download, uncompress, patching, …). With a giant
rework we centralize (most of) the verification to have a better
enforcement rate and (hopefully) less chance for bugs, but it breaks the
ABI bigtime in exchange – and as we break it anyway, it is broken even
harder.
It shouldn't effect most frontends as they don't deal with the acquire
system at all or implement their own items, but some do and will need to
be patched (might be an opportunity to use apt on-board material).
The theory is simple: Items implement methods to decide if hashes need to
be checked (in this stage) and to return the expected hashes for this
item (in this stage). The verification itself is done in worker message
passing which has the benefit that a hashsum error is now a proper error
for the acquire system rather than a Done() which is later revised to a
Failed().
|
|
If we e.g. fail on hash verification for Packages.xz its highly unlikely
that it will be any better with Packages.gz, so we just waste download
bandwidth and time. It also causes us always to fallback to the
uncompressed Packages file for which the error will finally be reported,
which in turn confuses users as the file usually doesn't exist on the
mirrors, so a bug in apt is suspected for even trying it…
|
|
Conflicts:
apt-pkg/pkgcache.h
debian/changelog
methods/https.cc
methods/server.cc
test/integration/test-apt-download-progress
|
|
Conflicts:
apt-pkg/deb/dpkgpm.cc
|
|
The underlying problem is that libapt-pkg does not correctly parse these
provides. Internally, it creates a version named "baz:i386" with
architecture amd64. Of course, such a package name is invalid and thus
this version is completely inaccessible. Thus, this bug should not cause
apt to accept a broken situation as valid. Nevertheless, it prevents
using architecture qualified depends.
Closes: 777071
|
