| Age | Commit message (Collapse) | Author |
|---|
|
This new field allows a repository to declare that access to
packages requires authorization. The current implementation will
set the pin to -32768 if no authorization has been provided in
the auth.conf(.d) files.
This implementation is suboptimal in two aspects:
(1) A repository should behave more like NotSource repositories
(2) We only have the host name for the repository, we cannot use
paths yet.
- We can fix those after an ABI break.
The code also adds a check to acquire-item.cc to not use the
specified repository as a download source, mimicking NotSource.
(cherry picked from commit c2b9b0489538fed4770515bd8853a960b13a2618)
LP: #1814727
|
|
This allows disabling a repository by pinning it to 'never',
which is internally translated to a value of -32768 (or whatever
the minimum of short is).
This overrides any other pin for that repository. It can be used
to make sure certain sources are never used; for example, in
unattended-upgrades.
To prevent semantic changes to existing files, we substitute
min + 1 for every pin-priority: <min>. This is a temporary
solution, as we are waiting for an ABI break.
To add pins with that value, the special Pin-Priority
"never" may be used for now. It's unclear if that will
persist, or if the interface will change eventually.
(cherry picked from commit 8bb2a91a070170d7d8e71206d1c66a26809bdbc3)
LP: #1814727
|
|
This fixes a security issue that can be exploited to inject arbritrary debs
or other files into a signed repository as followed:
(1) Server sends a redirect to somewhere%0a<headers for the apt method> (where %0a is
\n encoded)
(2) apt method decodes the redirect (because the method encodes the URLs before
sending them out), writting something like
somewhere\n
<headers>
into its output
(3) apt then uses the headers injected for validation purposes.
Regression-Of: c34ea12ad509cb34c954ed574a301c3cbede55ec
LP: #1812353
|
|
This allows us to install matching auth files for sources.list.d
files, for example; very useful.
This converts aptmethod's authfd from one FileFd to a vector of
pointers to FileFd, as FileFd cannot be copied, and move operators
are hard.
(cherry picked from commit bbfcc05c1978decd28df9681fd73e2a7d9a8c2a5)
LP: #1811120
|
|
Some post-invoke scripts install packages, which fails because
the environment variable is not set. This sets the variable for
all three kinds of scripts {pre,post-}invoke and pre-install-pkgs,
but we will only allow post-invoke at a later time.
Gbp-Dch: full
|
|
pkgCacheFile's destructor unlocks the system, which is confusing
if you did not open the cachefile with WithLock set. Create a private
data instance that holds the value of WithLock.
This regression was introduced in commit b2e465d6d32d2dc884f58b94acb7e35f671a87fe:
Join with aliencode
Author: jgg
Date: 2001-02-20 07:03:16 GMT
Join with aliencode
by replacing a "Lock" member that was only initialized when the lock
was taken by calls to Lock, UnLock; with the latter also taking place
if the former did not occur.
Regression-Of: b2e465d6d32d2dc884f58b94acb7e35f671a87fe
LP: #1794053
|
|
A recent change to use chronos inadvertently replaced the
difference of new usec - old usec with new sec - old usec,
which is obviously wrong.
|
|
We are seeing 'processing' messages from dpkg first, so it makes sense
to translate them to "Preparing" messages instead of using "Installing"
and co to override these shortly after with the "Preparing" messages.
The difference isn't all to visible as later messages tend to linger far
longer in the display than the ealier ones, but at least in a listing it
seems more logical.
|
|
The progress reporting relies on parsing the status reports of
dpkg which used to repeat being in the same state multiple times
in the same run, but by fixing #365921 it will stop doing so.
The problem is in theory just with 'config-files' in case we do purge as
this (can) do remove + purge in one step, but we remove this also for
the unpack + configure combination althrough we handle these currently
in two independent dpkg calls.
|
|
Exiting the processing loop as soon as the dpkg process finishes might
leave status-fd lines unprocessed which wasn't much of a problem in the
past as the progress would just be slightly off, but now that we us the
information also for skipping already done tasks and generate warnings
if we didn't see all expected messages we should make sure we seem them
all. We still need to exit "early" if dpkg exited unsuccessfully/crashed
through as the (remaining) status lines we get could be incomplete.
|
|
No user-visible change as it effects mostly code comments and
not a single error message, manpage or similar.
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
cppcheck reports: (error) Iterator 't' used after element has been erased.
The loop is actually fashioned to deal with this (not in the most
efficient way, but in simplest and speed isn't really a concern here)
IF this codepath had a "break" at the end… so I added one.
Note that the tests aren't failing before (and hopefully after) the
change as the undefined behavior we encounter is too stable.
Thanks: David Binderman for reporting
|
|
APT in 1.6 saw me rewriting the mirror:// transport method, which works
comparable to the decommissioned httpredir.d.o "just" that apt requests
a mirror list and performs all the redirections internally with all the
bells like parallel download and automatic fallback (more details in the
apt-transport-mirror manpage included in the 1.6 release).
The automatic fallback is the problem here: The intend is that if a file
fails to be downloaded (e.g. because the mirror is offline, broken,
out-of-sync, …) instead of erroring out the next mirror in the list is
contacted for a retry of the download.
Internally the acquire process of an InRelease file (works with the
Release/Release.gpg pair, too) happens in steps: 1) download file and 2)
verify file, both handled as URL requests passed around. Due to an
oversight the fallbacks for the first step are still active for the
second step, so that the successful download from another mirror stands
in for the failed verification… *facepalm*
Note that the attacker can not judge by the request arriving for the
InRelease file if the user is using the mirror method or not. If entire
traffic is observed Eve might be able to observe the request for
a mirror list, but that might or might not be telling if following
requests for InRelease files will be based on that list or for another
sources.list entry not using mirror (Users have also the option to have
the mirror list locally (via e.g. mirror+file://) instead of on a remote
host). If the user isn't using mirror:// for this InRelease file apt
will fail very visibly as intended.
(The mirror list needs to include at least two mirrors and to work
reliably the attacker needs to be able to MITM all mirrors in the list.
For remotely accessed mirror lists this is no limitation as the attacker
is in full control of the file in that case)
Fixed by clearing the alternatives after a step completes (and moving a pimpl
class further to the top to make that valid compilable code). mirror://
is at the moment the only method using this code infrastructure (for all
others this set is already empty) and the only method-independent user
so far is the download of deb files, but those are downloaded and
verified in a single step; so there shouldn't be much opportunity for
regression here even through a central code area is changed.
Upgrade instructions: Given all apt-based frontends are affected, even
additional restrictions like signed-by are bypassed and the attack in
progress is hardly visible in the progress reporting of an update
operation (the InRelease file is marked "Ign", but no fallback to
"Release/Release.gpg" is happening) and leaves no trace (expect files
downloaded from the attackers repository of course) the best course of
action might be to change the sources.list to not use the mirror family
of transports ({tor+,…}mirror{,+{http{,s},file,…}}) until a fixed
version of the src:apt packages are installed.
Regression-Of: 355e1aceac1dd05c4c7daf3420b09bd860fd169d,
57fa854e4cdb060e87ca265abd5a83364f9fa681
LP: #1787752
|
|
We forgot to set the variable for the selection changes. Let's
set it for that and some other dpkg calls.
Regression-Of: c2c8b4787b0882234ba2772ec7513afbf97b563a
|
|
The dpkg frontend lock is a lock dpkg tries to acquire
except if the frontend already acquires it.
This fixes a race condition in the install command where the
dpkg lock is not held for a short period of time between
different dpkg invocations.
For this reason we also define an environment variable
DPKG_FRONTEND_LOCKED for dpkg invocations so dpkg knows
not to try to acquire the frontend lock because it's held
by a parent process.
We can set DPKG_FRONTEND_LOCKED only if the frontend lock
really is held; that is, if our lock count is greater than 0
- otherwise an apt client not using the LockInner family of
functions would run dpkg without the frontend lock set, but
with DPKG_FRONTEND_LOCKED set. Such a process has a weaker
guarantee: Because dpkg would not lock the frontend lock
either, the process is prone to the existing races, and,
more importantly, so is a new style process.
Closes: #869546
[fixups: fix error messages, add public IsLocked() method, and
make {Un,}LockInner return an error on !debSystem]
|
|
The random_device fails if not enough entropy is available. We do
not need high-quality entropy here, though, so let's switch to a
seed based on the current time in nanoseconds, XORed with the PID.
|
|
debSystem uses a reference counted lock, so you can acquire it
multiple times in your applications, possibly nested. Nesting
locks causes a fd leak, though, as we only increment the lock
count when we already have locked twice, rather than once, and
hence when we call lock the second time, instead of increasing
the lock count, we open another lock fd.
This fixes the code to check if we have locked at all (> 0).
There is no practical problem here aside from the fd leak, as
closing the new fd releases the lock on the old one due to the
weird semantics of fcntl locks.
|
|
Clock changes while apt is running can result in strange reports
confusing (and amusing) users. Sadly, to keep the ABI for now the
code is a bit more ugly than it would need to be.
|
|
Commit d7c92411dc1f4c6be098d1425f9c1c075e0c2154 introduced a warning for
non-existent files from components not mentioned in Components to hint
users at a mispelling or the disappearance of a component.
The debian-installer subcomponent isn't actively advertised in the
Release file through, so if apt ends up in acquiring a file which
doesn't exist for this component (like Translation files) apt would
produce a warning:
W: Skipping acquire of configured file
'main/debian-installer/i18n/Translation-en' as repository
'http://deb.debian.org/debian buster InRelease' doesn't have the
component 'main/debian-installer' (component misspelt in sources.list?)
We prevent this in the future by checking if any file exists from this
component which results in the warning to be produced still for the
intended cases and silence it on the d-i case.
This could potentially cause the warning not to be produced in cases it
should be if some marginal file remains, but as this message is just a
hint and the setup a bit pathological lets ignore it for now.
There is also the possibility of having no file present as they would
all be 0-length files and being a "hidden" component, but that would be
easy to workaround from the repository side and isn't really actively used
at the moment in the wild.
Closes: #879591
|
|
more volatile: build-dep foo.deb/release & show foo.deb
See merge request apt-team/apt!14
|
|
Don't force the same mirror for by-hash URIs
See merge request apt-team/apt!15
|
|
When running with Debug::pkgAutoRemove=yes, explain why certain packages
are being marked, either because they're marked essential/important or
because they match the blacklist from APT::NeverAutoRemove.
This should help troubleshoot cases where autoremove is not proposing
removal of packages expected to be up for removal.
Tested manually with `apt-get autoremove -o Debug::pkgAutoRemove=yes`.
|
|
Downloading from the same mirror we got a Release file from makes sense
for non-unique URIs as their content changes between mirror states, but
if we ask for an index via by-hash we can be sure that we either get the
file we wanted or a 404 for which we can perform a fallback for which
allows us to pull indexes from different mirror in parallel.
|
|
Individual items shouldn't concern themselves with these alternative
locations, we can deal with this more efficiently within the
infrastructure created for other alternative URIs now avoiding the need
to implement this in each item.
|
|
If we got a file but it produced a hash error, mismatched size or
similar we shouldn't fallback to alternative URIs as they likely result
in the same error. If we can we should instead use another mirror.
We used to be a lot stricter by stopping all trys for this file if we
got a non-404 (or a hash-based) failure, but that is too hard as we
really want to try other mirrors (if we have them) in the hope that they
have the expected and correct files.
|
|
With the advent of compressed files and especially with in-memory
post-processed files the simple assumptions made in IsOk are no longer
true. Worse, they are at best duplicates of checks performed by the
cache generation (and validation) earlier and isn't used in too many
places. It is hence best to simply get right of these calls instead of
trying to fix them.
|
|
It is easier to prepend our fields, but that results in confusion for
things working on the so generated records as they don't start with the
usual "Package" – that shouldn't be a problem in theory, but in practice
e.g. "apt-cache show" shows these records directly to the user who
will probably be more confused by it than tools.
|
|
IP addresses are by definition not a domain so in the best case the
requests will just fail; we can do better than that on our own.
|
|
Prompted-by: Jakub Wilk <jwilk@debian.org>
|
|
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
Reported-By: gcc -Wdouble-promotion
Gbp-Dch: Ignore
|
|
Only use zstd defined variables if zstd was found.
|
|
pu/zstd
See merge request apt-team/apt!8
|
|
This implements support for multi frame files while keeping
error checking for unexpected EOF working correctly. Files
with multiple frames are generated by pzstd, for example.
|
|
This is a simplified variant of the code for xz, adapted to support
multiple digit integers.
|
|
Reported-By: lintian spelling-error-in-manpage
|
|
Shipping 1.6 with major 12 would not allow us to update 1.5.y
in a different way than 1.6.y if we have to without resorting
to minor version hacks. Let's just bump the major instead.
|
|
We just enabled https on changelogs.ubuntu.com, let's use it.
|
|
zstd is a compression algorithm developed by facebook. At level 19,
it is about 6% worse in size than xz -6, but decompression is multiple
times faster, saving about 40% install time, especially with eatmydata
on cloud instances.
|
|
Check that Date of Release file is not in the future
See merge request apt-team/apt!3
|
|
By restricting the Date field to be in the past, an attacker cannot
just create a repository from the future that would be accepted as
a valid update for a repository.
This check can be disabled by Acquire::Check-Date set to false. This
will also disable Check-Valid-Until and any future date related checking,
if any - the option means: "my computers date cannot be trusted."
Modify the tests to allow repositories to be up to 10 hours in the
future, so we can keep using hours there to simulate time changes.
|
|
The interesting takeaway here is perhaps that 'chmod +w' is effected by
the umask – obvious in hindsight of course. The usual setup helps with
hiding that applying that recursively on all directories (and files)
isn't correct. Ensuring files will not be stored with the wrong
permissions even if in strange umask contexts is trivial in comparison.
Fixing the test also highlighted that it wasn't bulletproof as apt will
automatically fix the permissions of the directories it works with, so
for this test we actually need to introduce a shortcut in the code.
Reported-By: Ubuntu autopkgtest CI
|
|
This was broken by a refactoring in 1adcf56bec7d2127d83aa423916639740fe8e586
which iterated over getCompressorExtensions() instead of the compressors and
using their extension field. getCompressorExtensions() does not contain the
empty extension for uncompressed files, though, and hence this was broken.
LP: #1746807
|
|
apt 1.6~alpha6 introduced aux requests to revamp the implementation of
a-t-mirror. This already included the potential of running as non-root,
but the detection wasn't complete resulting in errors or could produce
spurious warnings along the way if the directory didn't exist yet.
References: ef9677831f62a1554a888ebc7b162517d7881116
Closes: 887624
|
|
Allow specifying an alternative path to the InRelease file, so
you can have multiple versions of a repository, for example.
Enabling this option disables fallback to Release and Release.gpg,
so setting it to InRelease can be used to ensure that only that
will be tried.
We add two test cases: One for checking that it works, and another
for checking that the fallback does not happen.
Closes: #886745
|
|
The summary line sounds a bit much: what we end up doing is just adding
two more guards before using results which should always be valid™.
That these values aren't valid is likely a bug in itself somewhere, but
that is no reason for crashing.
|
|
The appended "partial" should not be translated, but some translations
got this wrong and now that there is also "auxfiles" we can just fix
that problem by hiding these untranslatables from the translators.
Gbp-Dch: Ignore
|
|
Allowing a method to request work from other methods is a powerful
capability which could be misused or exploited, so to slightly limited
the surface let method opt-in into this capability on startup.
|
|
Embedding an entire acquire stack and HTTP logic in the mirror method
made it rather heavy weight and fragile. This reimplement goes the other
way by doing only the bare minimum in the method itself and instead
redirect the actual download of files to their proper methods.
The reimplementation drops the (in the real world) unused query-string
feature as it isn't really implementable in the new architecture.
|
|
If a method needs a file to operate like e.g. mirror needs to get a list
of mirrors before it can redirect the the actual requests to them. That
could easily be solved by moving the logic into libapt directly, but by
allowing a method to request other methods to do something we can keep
this logic contained in the method and allow e.g. also methods which
perform binary patching or similar things.
Previously they would need to implement their own acquire system inside
the existing one which in all likelyhood will not support the same
features and methods nor operate with similar security compared to what
we have already running 'above' the requesting method. That said, to
avoid methods producing conflicts with "proper" files we are downloading
a new directory is introduced to keep the auxiliary files in.
[The message magic number 351 is a tribute to the german Grundgesetz
article 35 paragraph 1 which defines that all authorities of the
state(s) help each other on request.]
|
