| Age | Commit message (Collapse) | Author |
|---|
|
debian/experimental
|
|
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/deb/debmetaindex.h
apt-pkg/pkgcache.cc
test/integration/test-apt-ftparchive-src-cachedb
|
|
This is a internal struct not a external interface so the actual
breakage should be small.
|
|
Conflicts:
debian/changelog
|
|
|
|
|
|
|
|
In commit 21b3eac8 I promoted the check for installable dependencies to
a pre-install check, which also reverts to a known good candidate (the
installed version) if it fails. This revert was done even for user
requested candidate switches which disabled our Broken detection so that
install requests which are impossible to satisfy do not fail anymore,
but print an (incomplete) solution proposal and then exit successfully.
Closes: 745046
|
|
Adds also a small testcase for EDSP
Git-Dch: Ignore
|
|
EDSP code uses pipes opened via an FD as sources and later for those
files modification times and filesize are read - but never really used
again. The result we get from FileFd is probably wrong, but as we don't
use it anyway, we just don't fallback if we have nothing to fallback to
Git-Dch: Ignore
|
|
Solvers are supposed to exit successfully even if they haven't found a
solution, but a solver which fails drastically (like e.g. segfaults)
should be detected and dealt with accordingly instead of ignored.
|
|
"I am going to merge it tomorrow…"
|
|
|
|
Reported-By: clang++ -Werror
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/deb/debmetaindex.h
|
|
Conflicts:
test/integration/test-bug-747261-arch-specific-conflicts
|
|
|
|
Reported-By: clang++ -Werror
|
|
Reported-By: clang++ -Werror
|
|
The Buffer was allocated using strndup() so we need to free it using
free() instead of delete[]
|
|
Fix incorrect cast in pkgDepCache::Policy::GetCandidateVer()
Reported-By: clang -fsanitize=address -fno-omit-frame-pointer
|
|
ContentsExtract::~ContentsExtract() needs to use free() because
Data got allocated via realloc()
Reported-By: clang -fsanitize=address -fno-omit-frame-pointer
|
|
|
|
As outlined in #748355 apt segfaulted if it encountered a loop between a
package pre-depending on a package conflicting with the previous as it
ended up in an endless loop trying to unpack 'the other package'.
In this specific case as an essential package is involved a lot of force
needs to be applied, but can also be caused by 'normal' tight loops and
highlights a problem in how we handle breaks which we want to avoid.
The fix comes in multiple entangled changes:
1. All Smart* calls are guarded with loop detection. Some already had it,
some had parts of it, some did it incorrect, and some didn't even try.
2. temporary removes to avoid a loop (which is done if a loop is
detected) prevent the unpack of this looping package (we tried to unpack
it to avoid the conflict/breaks, but due to a loop we couldn't, so we
remove/deconfigure it instead which means we can't unpack it now)
3. handle conflicts and breaks very similar instead of duplicating most
of the code. The only remaining difference is, as it should:
deconfigure is enough for breaks, for conflicts we need the big hammer
|
|
These failure conditions come with an error message attached and the
conditions aren't workaroundable (otherwise this would have been done
instead of returning failure), so not erroring out here means that we
execute dpkg later on with a known not-working ordering adding insult
(our own error messages at the end) to injury (dpkg failure).
|
|
Git-Dch: Ignore
Reported-By: gcc
|
|
The by-hash can be configured on a per-hostname basis and a Release
file can indicate that it has by-hash support via a new flag.
The location of the hash now matches the AptByHash spec
|
|
|
|
This implements a apt update schema that get the indexfiles by the
hash instead of the name. The rational is that updates to the archive
servers/mirrors are not atomic so the client may have the previous
version of the Release file when the server updates to a new
Release file and new Packages/Sources/Translations indexes. By
keeping the files around by their hash we can still get the previous
indexfile without a hashsum mismatch.
Enable with APT::Acquire::By-Hash=1
|
|
Version/Architecture information in a Translation-$lang file is
not allowed, so don't try to parse it. This is a fix for a bugreport
where a Translation-en file contained the content of the regular
Packages file (probably due to local FS corruption). This lead to
strange error messages on file download.
Thanks to Thomas Reusch for the report.
|
|
debian/experimental
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
|
|
pkgAcq{DiffIndex,IndexMerge,pkgAcqBaseIndex, pkgAcqIndex}
|
|
If one of the pkgAcqIndex{,Merge}Diffs fails, they will run
pkgAcqIndex() which needs the IndexTarget/indexRecords data.
So we pass it along.
|
|
The cache heavily depends on the architecture(s) it is build for,
especially if you move from single- to multiarch. Adding a new
architecture to dpkg therefore has to be detected and must invalidate
the cache so that we don't operate on incorrect data.
The incorrect data will prevent us from doing otherwise sensible
actions (it doesn't allow bad things to happen) and the recovery is
simple and automatic in most cases, so this hides pretty well and is
also not as serious as it might sound at first.
Closes: 745036
|
|
Removes the 256 fields limit, deals consistently with spaces littered
all over the place and is even a tiny bit faster than before.
Even comes with a bunch of new tests to validate these claims.
|
|
It seems unlikely for now that proper archives will carry multiple
Description-* stanzas in the Packages (or Translation-*) file, but
sometimes apt eats its own output as shown by the usage of the CD team
and it would be interesting to let apt output multiple translations
e.g. in 'apt-cache show'.
|
|
Now that we have all hashes in the acquire system, pass the info down to
the methods, so that it can use it in the request and/or to precheck the
response.
|
|
Beside being another big API break with hopefully zero fallout in
reality it avoids having the same member and helper code in each and
every subclass.
|
|
It is not very extensible to have the supported Hashes hardcoded
everywhere and especially if it is part of virtual method names.
It is also possible that a method does not support the 'best' hash
(yet), so we might end up not being able to verify a file even though we
have a common subset of supported hashes. And those are just two of the
cases in which it is handy to have a more dynamic selection.
The downside is that this is a MAJOR API break, but the HashStringList
has a string constructor for compatibility, so with a bit of luck the
few frontends playing with the acquire system directly are okay.
|
|
Collect all hashes we can get from the source record and put them into a
HashStringList so that 'apt-get source' can use it instead of using
always the MD5sum.
We therefore also deprecate the MD5 struct member in favor of the list.
While at it, the parsing of the Files is enhanced so that records which
miss "Files" (aka MD5 checksums) are still searched for other checksums
as they include just as much data, just not with a nice and catchy name.
LP: 1098738
|
|
APT supports more than just one HashString and even allows to enforce
the usage of a specific hash. This class is intended to help with
storage and passing around of the HashStrings.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
Reported-By: gcc
|
|
|
|
debian/experimental
Conflicts:
apt-pkg/deb/debindexfile.cc
apt-pkg/deb/debindexfile.h
apt-pkg/deb/debsrcrecords.cc
|
|
debian/experimental
|
|
|
|
bugfix/update-progress-reporting
|
|
APT_PKG_MINOR < 13)
|
|
|
|
debian/experimental
|
|
debian/experimental
|
