| Age | Commit message (Collapse) | Author |
|---|
|
Do the same with less code in apt-get. This especially ensures that the
lock file (and the parent directories) exist before we are trying to
lock. It also means that clean now creates the directories if they are
missing so we returned to a proper clean state now.
Git-Dch: Ignore
|
|
By convention, if I run a tool with --help or --version I expect it to
exit successfully with the usage, while if I do call it wrong (like
without any parameters) I expect the usage message shown with a non-zero
exit.
|
|
Git-Dch: Ignore
|
|
We have a d-pointer available here, so go ahead and use it which also
helps in hidding some dirty details here. The "hard" part is keeping the
abi for the inlined methods so that they don't break – at least not more
than before as much of the point beside a speedup is support for more
than 256 fields in a single section.
|
|
No idea what the intension was here, but it seems like a leftover from
a workover which happened to be done differently later. As it doesn't
provide anything at the moment we just revert to the previous abi here.
Git-Dch: Ignore
|
|
The change itself is no problem ABI wise, but the remove of the old
undynamic hashtables is, so we bring it back for older abis and happily
use the now available free space to backport more recent additions like
the dynamic hashtable itself.
Git-Dch: Ignore
|
|
Adding a new parameter (with a default) is an ABI break, but you can
overload a method, which is "just" an API break for everyone doing
references to this method (aka: nobody).
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
We have a bunch of classes which are of no use for the outside world,
but were still exported and so needed to preserve ABI/API. Marking them
as hidden to not export them any longer is a big API break in theory,
but in practice nobody is using them – as if they would its a bug.
|
|
We can't add a new virtual method without breaking the ABI, but we can
freely add new methods, so for older ABIs we just implement this method
with a dynamic_cast, so that clients can be more ignorant about the API
here and especially don't need to pull a very dirty trick by assuming
internal knowledge (like apt-get did here).
|
|
Git-Dch: Ignore
|
|
For compatibility we use/provide and fill quiet some deprecated methods
and fields, which subsequently earns us a warning for using them. These
warnings therefore have to be disabled for these codeparts and that is
what this change does now in a slightly more elegant way.
Git-Dch: Ignore
|
|
The manpage of va_start and co additionally says:
On some systems, va_end contains a closing '}' matching a '{' in
va_start, so that both macros must occur in the same function, and in a
way that allows this.
So instead of return/breaking instantly, we save the return, make a
proper turndown with va_end in all cases and only end after that.
Reported-By: cppcheck
Git-Dch: Ignore
|
|
One word: "doh!" Commit f6d4ab9ad8a2cfe52737ab620dd252cf8ceec43d
disabled the check to prevent apt from downloading bigger patches
than the index it tries to patch. Happens rarly of course, but still.
Detected by scan-build complaining about a dead assignment.
To make up for the mistake a test is included as well.
|
|
debian/experimental
|
|
feature/no-more-acquire-guessing
Conflicts:
apt-pkg/acquire-item.cc
|
|
|
|
|
|
Conflicts:
debian/changelog
|
|
|
|
|
|
The pkgAcquire::Run() code works uses a while(ToFetch > 0) loop
over the items queued for fetching. This means that we need to
Deqeueue the item if we call AbortTransaction() to avoid a hang.
|
|
Handle Translation-* files exactly like Packages files (with the
expection that it is ok if a download of them fails). Remove all
"guessing" on apts side. This will elimimnate a bunch of errors
releated to captive portals and similar. Its also more correct
and removes another potential attack vector.
|
|
The worker is the part closest to the methods, which will call the item
methods according to what it gets back from the methods, it is therefore
a better place to change permissions as it is very central and can do it
now at the point the item is assigned to a method rather than then it is
queued for download (and as before while dequeued via Done/Failure).
Git-Dch: Ignore
|
|
Central methods of our infrastructure like this one responsible for
communication with our methods shouldn't be more complicated then they
have to and not claim to have (albeit unlikely) bugs.
While I am not sure about having improved the first part, the bug is now
gone and a few explicit tests check that it stays that way, so nobody
will notice the difference (hopefully) – expect that this should a very
tiny bit faster as well as we don't manually proceed through the string.
Git-Dch: Ignore
|
|
It is a very simple hashstring, which is why it isn't contributing to
the usability of a list of them, but it is also trivial to check and
calculate, so it doesn't hurt checking it either as it can combined even
with the simplest other hashes greatly complicate attacks on them as you
suddenly need a same-size hash collision, which is usually a lot harder
to achieve.
|
|
Git-Dch: ignore
|
|
Instead of hardcoding Dpkg::MaxArgBytes find out about it using
the sysconf(_SC_ARG_MAX) call.
|
|
partial files are chowned by the Item baseclass to let the methods work
with them. Now, this baseclass is also responsible for chowning the
files back to root instead of having various deeper levels do this.
The consequence is that all overloaded Failed() methods now call the
Item::Failed base as their first step. The same is done for Done().
The effect is that even in partial files usually don't belong to
_apt anymore, helping sneakernets and reducing possibilities of a bad
method modifying files not belonging to them.
The change is supported by the framework not only supporting being run
as root, but with proper permission management, too, so that privilege
dropping can be tested with them.
|
|
Git-Dch: Ignore
|
|
Ensure in SetupAPTPartialDirectory() that the /etc/apt/auth.conf file
can be read by the priv sep apt methods.
|
|
Private temporary directories as created by e.g. libpam-tmpdir are nice,
but they are also very effective in preventing our priviledge dropping
to work as TMPDIR will be set to a directory only root has access to, so
working with it as _apt will fail. We circumvent this by extending our
check for a usable TMPDIR setting by checking access rights.
Closes: 765951
|
|
These functions check the exit code of the command, but for apt commands
we can go further and require an error message for non-zero exits and
none for zero exits.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
If we get an IMS hit for an InRelease file we use the file we already
have and pass it into reverification, but this changes the permissions
and on abort of the transaction they weren't switched back.
This is now done, additionally, every file in partial which hasn't
failed gets permission and owner changed for root access as well, as it
is very well possible that the next invocation will (re)use these files.
|
|
Transactions are run and completed from multiple places, so it happens
for unsigned repos that the Release file was commited even if it was
previously aborted (due to --no-allow-insecure-repositories). The reason
is simply that the "failure" of getting an InRelease/Release.gpg is
currently ignored, so that the acquire process believes that nothing bad
happened and commits the transaction even though the same transaction
was previously aborted.
|
|
Refactors a bit to ensure the same message is used in all three cases as
well.
Git-Dch: Ignore
|
|
We do not support compressed indexes for cdrom sources as we rewrite
some of them, so supporting it correctly could be hard. What we do
instead in the meantime is probably disabling it for cdrom sources.
|
|
The acquire code changed completely, so this is more an import of the
testcase and a new fix than the merge of an existent fix.
Conflicts:
apt-pkg/acquire-item.cc
|
|
Regression from merging 801745284905e7962aa77a9f37a6b4e7fcdc19d0 and
b0f4b486e6850c5f98520ccf19da71d0ed748ae4. While fine by itself, merged
the part fixing the filename is skipped if a cdrom source is
encountered, so that our list-cleanup removes what seems to be orphaned
files.
Closes: 765458
|
|
Similar to 8f45798d532223adc378a4ad9ecfc64b3be26e4f, there is no harm to
set this, even if we don't drop privileges.
Git-Dch: Ignore
|
|
|
|
This change is made for backward compatiblity and should be reverted
once jessie is out.
|
|
The constructor is calling the baseclass pkgAcqIndex which does this
already – and also does it correctly for compressed files which would
overwise lead to the size of uncompressed files to be expected.
Git-Dch: Ignore
|
|
I am pretty sure I did that before committing broken stuff…
Git-Dch: Ignore
|
|
Do not drop privileges in the methods when using a older version of
libapt that does not support the chown magic in partial/ yet. To
do this DropPrivileges() now will ignore a empty Apt::Sandbox::User.
Cleanup all hardcoded _apt along the way.
|
|
Do not require a special flag to be present to update trusted=yes
sources as this flag in the sources.list is obviously special enough.
Note that this is just disabling the error message, the user will still
be warned about all the (possible) failures the repository generated, it
is just triggering the acceptance of the warnings on a source-by-source
level.
Similarily, the trusted=no flag doesn't require the user to pass
additional flags to update, if the repository looks fine in the view of
apt it will update just fine. The unauthenticated warnings will "just" be
presented then the data is used.
In case you wonder: Both was the behavior in previous versions, too.
|
|
Reimplementing an inline method is opening a can of worms we don't want
to open if we ever want to us a d-pointer in those classes, so we do the
only thing which can save us from hell: move the destructors into the cc
sources and we are good.
Technically not an ABI break as the methods inline or not do the same
(nothing), so a program compiled against the old version still works
with the new version (beside that this version is still in experimental,
so nothing really has been build against this library anyway).
Git-Dch: Ignore
|
|
The same message is used for InRelease if fails in gpgv, but the
Release/Release.gpg duo needs to handle the failing download case as
well (InRelease just defers to the duo if download fails) and print a
message accompaning the insecure error to provide a hint on what is
going on.
|
