summaryrefslogtreecommitdiff
path: root/apt-pkg
AgeCommit message (Collapse)Author
2016-11-24do not configure unconfigured to be removed packagesDavid Kalnischkies
We try to configure all packages at the end which need to be configured, but that also applies to packages which weren't completely installed (e.g. maintainerscript failed) we end up removing in this interaction instead. APT doesn't perform this explicit configure in the end as it is using "dpkg --configure --pending", but it does confuse the progress report and potentially also hook scripts. Regression-Of: 9ffbac99e52c91182ed8ff8678a994626b194e69
2016-11-24don't perform implicit crossgrades involving M-A:sameDavid Kalnischkies
dpkg stumbles over these (#844300) and we haven't dropped 'easier' removes to be implicit and to be scheduled by dpkg by default so far so we shouldn't push the decision in such cases to dpkg either.
2016-11-24improve arch-unqualified dpkg-progress parsingDavid Kalnischkies
Our old idea was to look for the first package which would be "touched" and take this as the package dpkg is talking about, but that is incorrect in complicated situations like a package upgraded to/from multiple M-A:same siblings installed. As we us the progress report to decide what is still needed we have to be reasonabily right about the package dpkg is talking about, so we jump to quite a few loops to get it.
2016-11-23correct cross & disappear progress detectionDavid Kalnischkies
Given that we use the progress information to skip over actions dpkg has already done like not purging a package which was already removed and had no config files or not acting on disappeared packages and such it is important that apt and dpkg agree on which states the package has to pass through. To ensure that we keep tabs on this in the future a warning is added at the end if apt hasn't seen all the action it was supposed to see. I can't wait for the first bugreporters to wonder about this…
2016-11-23react to trig-pend only if we have nothing else to doDavid Kalnischkies
If a package is triggered dpkg frequently issues two messages about it causing us to make a note about it both times which messes up our planned dpkg actions view. Adding these actions if we have nothing else planned fixes this and should still be correct as those planned actions will deal with the triggering just fine and we avoid strange problems like a package triggered before its removed…
2016-11-22Do not use MD5SumValue for Description_md5()Julian Andres Klode
Our profile says we spend about 5% of the time transforming the hex digits into the binary format used by HashsumValue, all for comparing them against the other strings. That makes no sense at all. According to callgrind, this reduces the overall instruction count from 5,3 billion to 5 billion in my example, which roughly matches the 5%.
2016-11-22debListParser: Micro-optimize AvailableDescriptionLanguages()Julian Andres Klode
Generating a string for each version we see is somewhat inefficient. The problem here is that the Description tag names are longer than 15 byte, and thus require an allocation on the heap, which we should avoid. It seems reasonable that 20 characters works for all languages codes used for archive descriptions, but if not, there's a warning, so we'll catch that. This should improve performance by about 2%.
2016-11-22Compare size before data when ordering cache bucket entriesJulian Andres Klode
This has the effect of significantly reducing actual string comparisons, and should improve the performance of FindGrp a bit, although it's hardly measureable (callgrind says it uses 10% instructions less now).
2016-11-22Optimize VersionHash() to not need temporary copy of inputJulian Andres Klode
Stop copying stuff, and just parse the bytes one by-one to the newly created AddCRC16Byte. This improves the instruction count for an update run from 720,850,121 to 455,801,749 according to callgrind.
2016-11-22Introduce tolower_ascii_unsafe() and use it for hashingJulian Andres Klode
This one has some obvious collisions for non-alphabetical characters, like some control characters also hashing to numbers, but we don't really have those, and these are hash functions which are not collision free to begin with.
2016-11-22Bump the cache major version for non-backportable changesJulian Andres Klode
We already have two stable series with major version 10, and the next commits will introduce non-backportable performance changes that affect the cache algorithms, so we need to bump the major version now to prevent future problems.
2016-11-22debListParser: Convert to use pkgTagSection::Key-based lookupJulian Andres Klode
This basically gets rid of 40-50% of the hash table lookups, making things a bit faster that way, and the profiles look far cleaner.
2016-11-22TagSection: Introduce functions for looking up by key idsJulian Andres Klode
Introduce a new enum class and add functions that can do a lookup with that enum class. This uses triehash.
2016-11-22TagSection: Extract Find() methods taking Pos instead of KeyJulian Andres Klode
This allows us to add a perfect hash function to the tag file without having to reimplement the methods a second time.
2016-11-22TagSection: Split AlphaIndexes into AlphaIndexes and BetaIndexesJulian Andres Klode
Move the use of the AlphaHash to a new second hash table in preparation for the arrival of the new perfect hash function. With the new perfect hash function hashing most of the keys for us, having 128 slots for a fallback hash function seems enough and prevents us from wasting space.
2016-11-11show distribution mismatch for changed codenamesDavid Kalnischkies
We have the last Release file around for other checks, so its trivial to look if the new Release file contains a new codename (e.g. the user has "testing" in the sources and it flipped from stretch to buster). Such a change can be okay and expected, but also be a hint of problems, so a warning if we see it happen seems okay. We can only print it once anyhow and frontends and co are likely to ignore/hide it.
2016-11-11don't warn if untransformed distribution matchesDavid Kalnischkies
A suite or codename entry in the Release file is checked against the distribution field in the sources.list entry that lead to the download of that Release file. This distribution entry can contain slashes in the distribution field: deb http://security.debian.org/debian wheezy/updates main However, the Release file may only contain "wheezy" in the Codename field and not "wheezy/updates". So a transformation needs to take place that removes the last / and everything that comes after (e.g. "/updates"). This fails, however, for valid cases like a reprepro snapshot where the given Codename contains slashes but is perfectly fine and doesn't need to be transformed. Since that transformation is essentially just a workaround for special cases like the security repository, it should be checked if the literal Codename without any transformations happened is valid and only if isn't the dist should be checked against the transformated one. This way special cases like security.debian.org are handled and reprepro snapshots work too. The initial patch was taken as insperationto move whole transformation to CheckDist() which makes this method more accepting & easier to use (but according to codesearch.d.n we are the only users anyhow). Thanks: Lukas Anzinger for initial patch Closes: 644610
2016-11-11add hidden config to set packages as Essential/ImportantDavid Kalnischkies
You can pretty much achieve the same with a local dummy package if you want to, but libapt has an inbuilt setting for essential: "apt" which can be overridden with this option as well – it could be helpful in quick tests and what not so adding this alternative shouldn't really hurt much. We aren't going to document them much through as care must be taken in regards to the binary caches as they aren't invalidated by config options alone, so the effects of old settings could still be in them, similar to the other already existing pkgCacheGen option(s). Closes: 767891 Thanks: Anthony Towns for initial patch
2016-11-11add TMP/TEMP/TEMPDIR to the TMPDIR DropPrivileges danceDavid Kalnischkies
apt tools do not really support these other variables, but tools apt calls might, so lets play save and clean those up as needed. Reported-By: Paul Wise (pabs) on IRC
2016-11-10support 'apt build-dep .' (aka: without /)David Kalnischkies
Reported-By: Christoph Berg (Myon) on IRC
2016-11-09rename Checksum-FileSize to Filesize in hashsum mismatchDavid Kalnischkies
Some people do not recognize the field value with such an arcane name and/or expect it to refer to something different (e.g. #839257). We can't just rename it internally as its an avoidance strategy as such fieldname existed previously with less clear semantics, but we can spare the general public from this implementation detail.
2016-11-09show the conflicting distribution warning againDavid Kalnischkies
Sometimes you should really act upon your todos. Especially if you have placed them directly in the code. Closes: 841874
2016-11-09reset HOME, USER(NAME), TMPDIR & SHELL in DropPrivilegesDavid Kalnischkies
We can't cleanup the environment like e.g. sudo would do as you usually want the environment to "leak" into these helpers, but some variables like HOME should really not have still the value of the root user – it could confuse the helpers (USER) and HOME isn't accessible anyhow. Closes: 842877
2016-11-09fix three typos in sources & manpagesChris Leick
2016-11-09add support for Build-Depends/Conflicts-ArchJohannes Schauer
These new enum values might cause "interesting" behaviour in tools not expecting them – like an old apt would think a Build-Conflicts-Arch is some sort of Build-Depends – but that can't reasonably be avoided and effects only packages using B-D/C-A so if there is any breakage the tools can easily be adapted. The APT_PKG_RELEASE number is increased so that libapt users can detect the availability of these new enum fields via: #if APT_PKG_ABI > 500 || (APT_PKG_ABI == 500 && APT_PKG_RELEASE >= 1) Closes: #837395
2016-11-02keep Release.gpg on untrusted to trusted IMS-HitDavid Kalnischkies
A user relying on the deprecated behaviour of apt-get to accept a source with an unknown pubkey to install a package containing the key expects that the following 'apt-get update' causes the source to be considered as trusted, but in case the source hadn't changed in the meantime this wasn't happening: The source kept being untrusted until the Release file was changed. This only effects sources not using InRelease and only apt-get, the apt binary downright refuses this course of actions, but it is a common way of adding external sources. Closes: 838779
2016-10-04Do not read stderr from proxy autodetection scriptsJulian Andres Klode
This fixes a regression introduced in commit 8f858d560e3b7b475c623c4e242d1edce246025a don't leak FD in AutoProxyDetect command return parsing which accidentally made the proxy autodetection code also read the scripts output on stderr, not only on stdout when it switched the code from popen() to Popen(). Reported-By: Tim Small <tim@seoss.co.uk>
2016-09-18VersionHash: Do not skip too long dependency linesJulian Andres Klode
If the dependency line does not contain spaces in the repository but does in the dpkg status file (because dpkg normalized the dependency list), the dpkg line might be longer than the line in the repository. If it now happens to be longer than 1024 characters, it would be skipped, causing the hashes to be out of date. Note that we have to bump the minor cache version again as this changes the format slightly, and we might get mismatches with an older src cache otherwise. Fixes Debian/apt#23
2016-09-11Coverage: Do not print messages from gcovJulian Andres Klode
We need to ignore messages from gcov. All those messages start with profiling: and are printed using vfprintf(), so the only thing we can do is add a library overriding those functions and linking apt-pkg to it.
2016-09-07edsp: try 2 to read responses even if writing failedDavid Kalnischkies
Commit b60c8a89c281f2bb945d426d2215cbf8f5760738 improved the situation, but due to inconsistency mostly for planners, not for solvers. As the idea of hiding errors if we show another error is a bit scary (as the extern error might be a followup of our intern error, rather than the reason for our intern error as it is at the moment) we don't discard the errors, but if we got an extern error we show them directly removing them from the error list at the end of the run – that list will contain the extern error which hopefully gives us the best of both worlds. The problem itself is the same as before: The externals exiting before apt is done talking to them. Reported-By: Johannes 'josch' Schauer on IRC
2016-09-02acquire: Use priority queues and a 3 stage pipeline designJulian Andres Klode
Employ a priority queue instead of a normal queue to hold the items; and only add items to the running pipeline if their priority is the same or higher than the priority of items in the queue. The priorities are designed for a 3 stage pipeline system: In stage 1, all Release files and .diff/Index files are fetched. This allows us to determine what files remain to be fetched, and thus ensures a usable progress reporting. In stage 2, all Pdiff patches are fetched, so we can apply them in parallel with fetching other files in stage 3. In stage 3, all other files are fetched (complete index files such as Contents, Packages). Performance improvements, mainly from fetching the pdiff patches before complete files, so they can be applied in parallel: For the 01 Sep 2016 03:35:23 UTC -> 02 Sep 2016 09:25:37 update of Debian unstable and testing with Contents and appstream for amd64 and i386, update time reduced from 37 seconds to 24-28 seconds. Previously, apt would first download new DEP11 icon tarballs and metadata files, causing the CPU to be idle. By fetching the diffs in stage 2, we can now patch our contents and Packages files while we are downloading the DEP11 stuff.
2016-09-02CMake: apt-pkg: Use correct ICONV_INCLUDE_DIRS variableJulian Andres Klode
This accidentally used ICONV_DIRECTORIES, which does not even exist. Weird.
2016-09-01try not to call memcpy with length 0 in hash calculationsDavid Kalnischkies
memcpy is marked as nonnull for its input, but ignores the input anyhow if the declared length is zero. Our SHA2 implementations do this as well, it was "just" MD5 and SHA1 missing, so we add the length check here as well as along the callstack as it is really pointless to do all these method calls for "nothing". Reported-By: gcc -fsanitize=undefined
2016-08-31Base256ToNum: Fix uninitialized valueJulian Andres Klode
If the inner Base256ToNum() returned false, it did not set Num to a new value, causing it to be uninitialized, and thus might have caused the function to exit despite a good result. Also document why the Res = Num, if (Res != Num) magic is done. Reported-By: valgrind
2016-08-31TagFile: Fix off-by-one errors in comment strippingJulian Andres Klode
Adding 1 to the value of d->End - current makes restLength one byte too long: If we pass memchr(current, ..., restLength) has thus undefined behavior. Also, reading the value of current has undefined behavior if current >= d->End, not only for current > d->End: Consider a string of length 1, that is d->End = d->Current + 1. We can only read at d->Current + 0, but d->Current + 1 is beyond the end of the string. This probably caused several inexplicable build failures on hurd-i386 in the past, and just now caused a build failure on Ubuntu's amd64 builder. Reported-By: valgrind
2016-08-31Fix segfault and out-of-bounds read in Binary fieldsJulian Andres Klode
If a Binary field contains one or more spaces before a comma, the code produced a segmentation fault, as it accidentally set a pointer to 0 instead of the value of the pointer. If the comma is at the beginning of the field, the code would create a binStartNext that points one element before the start of the string, which is undefined behavior. We also need to check that we do not exit the string during the replacement of spaces before commas: A string of the form " ," would normally exit the boundary of the Buffer: binStartNext = offset 1 ',' binEnd = offset 0 ' ' isspace_ascii(*binEnd) = true => --binEnd => binEnd = - 1 We get rid of the problem by only allowing spaces to be eliminated if they are not the first character of the buffer: binStartNext = offset 1 ',' binEnd = offset 0 ' ' binEnd > buffer = false, isspace_ascii(*binEnd) = true => exit loop => binEnd remains 0
2016-08-29init: Add Dir::Bin::planners default entryJulian Andres Klode
Apparently we had no default defined for this. Reported-By: David Kalnischkies
2016-08-29init: Fix path to external solversJulian Andres Klode
This accidentally had two apt in it. This fixes a regression from commit 8757a0f. Gbp-Dch: ignore
2016-08-29don't loop on pinning pkgs from absolute debs by regexDavid Kalnischkies
An absolute filename for a *.deb file starts with a /. A package with the name of the file is inserted in the cache which is provided by the "real" package for internal reasons. The pinning code detects a regex based wildcard by having the regex start with /. That is no problem as a / can not be included in a package name… expect that our virtual filename package can and does. We fix this two ways actually: First, a regex is only being considered a regex if it also ends with / (we don't support flags). That stops our problem with the virtual filename packages already, but to be sure we also do not enter the loop if matcher and package name are equal. It has to be noted that the creation of pins for virtual packages like the here effected filename packages is pointless as only versions can be pinned, but checking that a package is really purely virtual is too costly compared to just creating an unused pin. Closes: 835818
2016-08-29randomize acquire order for same type index filesDavid Kalnischkies
Without randomizing the order in which we download the index files we leak needlessly information to the mirrors of which architecture is native or foreign on this system. More importantly, we leak the order in which description translations will be used which in most cases will e.g. have the native tongue first. Note that the leak effect in practice is limited as apt detects if a file it wants to download is already available in the latest version from a previous download and does not query the server in such cases. Combined with the fact that Translation files are usually updated infrequently and not all at the same time, so a mirror can never be sure if it got asked about all files the user wants.
2016-08-27Merge branch 'portability/freebsd'Julian Andres Klode
2016-08-26CMake: Add missing iconv dependencyJulian Andres Klode
FreeBSD has two iconv systems: It ships an iconv.h itself, and symbols for that in the libc. But there's also the port of GNU libiconv, which unfortunately for us, Doxygen depends on. This changes things to prefer a separate libiconv library over the system one; that is, the port on FreeBSD. Gbp-Dch: ignore
2016-08-26Make root group configurable via ROOT_GROUPJulian Andres Klode
This is needed on BSD where root's default group is wheel, not root.
2016-08-26changelog: Respect Dir setting for local changelog gettingJulian Andres Klode
This fixes issues with chroots, but the goal here was to get the test suite working on systems without dpkg.
2016-08-26Make directory paths configurableJulian Andres Klode
This allows other vendors to use different paths, or to build your own APT in /opt for testing. Note that this uses + 1 in some places, as the paths we receive are absolute, but we need to strip of the initial /.
2016-08-26Use C locale instead of C.UTF-8 for protocol stringsJulian Andres Klode
The C.UTF-8 locale is not portable, so we need to use C, otherwise we crash on other systems. We can use std::locale::classic() for that, which might also be a bit cheaper than using locale("C").
2016-08-26CMake: Do not use -lresolv if res_init exists in libcJulian Andres Klode
Gbp-Dch: ignore
2016-08-26CMake: Do not hardcode -ldlJulian Andres Klode
Does not exist on FreeBSD Gbp-Dch: ignore
2016-08-26Add missing includes and external definitionsJulian Andres Klode
Several modules use std::array without including the array header. Bad modules. Some modules use STDOUT_FILENO and friends, or close() without including unistd.h, where they are defined. One module also uses WIFEXITED() without including sys/wait.h. Finally, environ is not specified to be defined in unistd.h. We are required to define it ourselves according to POSIX, so let's do that.
2016-08-25treat .ddeb files like .deb, especially for dpkgDavid Kalnischkies
Ubuntu uses *.ddeb files for their debug packages, but the interface we are using since f495992428a396e0f98886c9a761a804aa161c68 to talk to dpkg isn't supporting *.ddeb files. This used to work previously as apt itself isn't caring about the filenames at all and if they are explicitly mentioned dpkg will accept all, too. It might or might not be a good idea to patch dpkg, too, but regardless of it happening, we don't want to couple us to closely to dpkg for this minor feature but testing for this at runtime as it would delay shipping the fix for the too long commandlines further. It is also questionable if it is really a good idea to allow any file extension to be used here (like .foobar in the testcase), but we used to and we tend to avoid breaking existing usecases if we can help it. As a bonus, this also allows the installation of ddeb files directly from the commandline as you can with deb files already. We continue to ignore udeb through as the user-mistake to useful ratio is too high. LP: #1616909