summaryrefslogtreecommitdiff
path: root/apt-pkg
AgeCommit message (Collapse)Author
2017-01-19remove 'old' FAILED files in the next acquire callDavid Kalnischkies
If apt renames a file to .FAILED it leaves its namespace and is never touched again – expect since 1.1~exp4 in which "apt clean" will remove those files. The usefulness of these files rapidly degrades if you don't keep the update log itself (together with debug output in the best case) through and on 99% of all system they will be kept around forever just to collect dust over time and eat up space. With this commit an update call will remove all FAILED files of previous runs, so that the FAILED files you have on disk are always only the ones related to the last apt run stopping apt from hoarding files. Closes: 846476
2017-01-19avoid validate/delete/load race in cache generationDavid Kalnischkies
Keeping the Fd of the cache file we have validated around to later load it into the mmap ensures not only that we load the same file (which wouldn't really be a problem in practice), but that this file also still exists and wasn't deleted e.g. by a 'apt clean' call run in parallel.
2017-01-17CMake: Document that the globs are expanded during CMakeJulian Andres Klode
This will avoid people from thinking that they have to do nothing when they change the set of files. Gbp-Dch: ignore
2017-01-17CMake: Find the Perl executable, and use it to run perl scriptsJulian Andres Klode
This is somewhat more portable than just hardcoding perl or in the triehash case /usr/bin/perl in the shebang. Thanks: Guillem Jover for the hint Gbp-Dch: ignore
2017-01-17Read dpkg tables to handle architecture wildcardsJulian Andres Klode
Our implementation of wildcards was rudimentary. It worked for some common ones, but it was also broken: For example, armel matched any-armel, but should match any-arm. With this commit, we load the correct tables from dpkg. Supported are both triplets and quadruplet tables (the latter introduced in dpkg 1.18.11). There are some odd things we have to deal with in the cache filter for historical and API reasons: * The character "*" must be accepted as an alternative to any - in fact it may appear anywhere in the wildcard as we also allow fnmatch() style wildcard matching on the commandline. * The code might get passed an arch with a minus at the end, for example the cmdline "install apt:any-arm-" will first try to check if any-arm- is a valid architecture. We deal with this by rejecting any wildcard ending in a minus. * Triplets are actually implemented by extending them to faux quadruplets - by prepending a "base" component for the architecture tuple, and "any" if there is a wildcard component. Once we have constructed a wildcard, it is transformed into an fnmatch() expression for historical reasons. In the future, we should really get a tuple class and implement matching in a better, more explicit way. This does for now though - it passes all the test cases and accepts all things it should accept. Closes: #748936 Thanks: James Clarke <jrtc27@jrtc27.com> for the initial patch
2017-01-17strutl: Provide an APT::String::Join() functionJulian Andres Klode
Thanks: James Clarke <jrtc27@jrtc27.com> for the implementation Gbp-Dch: ignore
2017-01-02ParseDepends: Support passing the desired architectureNiels Thykier
This is useful for e.g. Britney, where the Build-Depends would have to be parsed for multiple architectures. With this change, the call can choose the architecture without having to mess with the config. Signed-off-by: Niels Thykier <niels@thykier.net> Closes: #845969 (jak@d.o: made the code compile)
2016-12-31allow warning generation for non-whitelisted optionsDavid Kalnischkies
The idea is simple: Each¹ Find*( call starts with a call check if the given option (with the requested type) exists in the whitelist. The whitelist is specified via our configure-index file so that we have a better chance at keeping it current. the whitelist is loaded via a special (undocumented for now) configuration stanza and if none is loaded the empty whitelist will make it so that no warnings are shown. Much needs to be done still, but that is as good a time as any to take a snapshot of the current state and release it into the wild given that it found some bugs already and has no practical effect on users. ¹ not all in this iteration, but many
2016-12-31fix minimum pkgs option for dpkg --recursive usageDavid Kalnischkies
Interpreting a boolean as an int works just fine – it just hasn't the intended result – it isn't a serious problem through as the disabling of the usage of this dpkg calling style is just an "optimization"
2016-12-31use FindB instead of FindI for Debug::pkgAutoRemoveDavid Kalnischkies
Again no practical difference, but for consistency a boolean option should really be accessed via a boolean method rather than an int especially if you happen to try setting the option to "true" … Gbp-Dch: Ignore
2016-12-31avoid producing invalid options if repo has no hostDavid Kalnischkies
This can happen e.g. for file: repositories. There is no inherent problem with setting such values internally, but its bad style, forbidden in the manpage and could be annoying in the future. Gbp-Dch: Ignore
2016-12-31gets file location via FindFile instead of manual mergeDavid Kalnischkies
Unlikely to have any practical effect, but its more consistent to use the right methods instead of performing it slightly incorrect by hand. Gbp-Dch: Ignore
2016-12-31ensure generation of valid EDSP error stanzasDavid Kalnischkies
The crude way of preparing a message to be a multiline value failed at generation valid deb822 in case the error message ended with a new line like the resolving errors from apt do. apt itself can parse these, but other tools like grep-dctrl choke on it, so be nice and print valid. Reported-By: Johannes 'josch' Schauer on IRC
2016-12-31do not generate Maximum-Size if we already have that fieldDavid Kalnischkies
Any respective parser will do the right thing and grab the last value, but its better for style to generate that field only once. Gbp-Dch: Ignore
2016-12-31warn if clearsigned file has ignored content partsDavid Kalnischkies
Clearsigned files like InRelease, .dsc, .changes and co can potentially include unsigned or additional messages blocks ignored by gpg in verification, but a potential source of trouble in our own parsing attempts – and an unneeded risk as the usecases for the clearsigned files we deal with do not reasonably include unsigned parts (like emails or some such). This commit changes the silent ignoring to warnings for now to get an impression on how widespread unintended unsigned parts are, but eventually we want to turn these into hard errors.
2016-12-16reword "Can't drop priv" warning messageDavid Kalnischkies
Note: This is a warning about disabling a security feature. It is supposed to be scary as we are disabling a security feature and we can't just be silent about it! Downloads really shouldn't happen any longer as root to decrease the attack surface – but if a warning causes that much uproar, consider what an error would do… The old WARNING message: | W: Can't drop privileges for downloading as file 'foobar' couldn't be | accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied) is frequently (incorrectly) considered to be an error message indicating that the download didn't happen which isn't the case, it was performed, but without all the security features enabled we could have used if run from some other place… The word "unsandboxed" is chosen as the term 'sandbox(ed)' is a common encounter in feature lists/changelogs and more people are hopefully able to make the connection to 'security' than it is the case for 'privilege dropping' which is more correct, but far less known. Closes: #813786 LP: #1522675
2016-12-08gpgv: Flush the files before checking for errorsJulian Andres Klode
This is a follow up to the previous issue where we did not check if getline() returned -1 due to an end of file or due to an error like memory allocation, treating both as end of file. Here we ensure that we also handle buffered writes correctly by flushing the files before checking for any errors in our error stack. Buffered writes themselves were introduced in 1.1.9, but the function was never called with a buffered file from inside apt until commit 46c4043d741cb2c1d54e7f5bfaa234f1b7580f6c which was first released with apt 1.2.10. The function is public, though, so fixing this is a good idea anyway. Affected: >= 1.1.9
2016-12-08SECURITY UPDATE: gpgv: Check for errors when splitting files (CVE-2016-1252)Julian Andres Klode
This fixes a security issue where signatures of the InRelease files could be circumvented in a man-in-the-middle attack, giving attackers the ability to serve any packages they want to a system, in turn giving them root access. It turns out that getline() may not only return EINVAL as stated in the documentation - it might also return in case of an error when allocating memory. This fix not only adds a check that reading worked correctly, it also implicitly checks that all writes worked by reporting any other error that occurred inside the loop and was logged by apt. Affected: >= 0.9.8 Reported-By: Jann Horn <jannh@google.com> Thanks: Jann Horn, Google Project Zero for reporting the issue LP: #1647467
2016-11-25get pdiff files from the same mirror as the indexDavid Kalnischkies
In ad9416611ab83f7799f2dcb4bf7f3ef30e9fe6f8 we fall back to asking the original mirror (e.g. a redirector) if we do not get the expected result. This works for the indexes, but patches are a different beast and much simpler. Adding this fallback code here seems like overkill as they are usually right along their Index file, so actually forward the relevant settings to the patch items which fixes pdiff support combined with a redirector and partial mirrors as in such a situation the pdiff patches would be 404 and the complete index would be downloaded.
2016-11-24report apt-key errors via status-fd messagesDavid Kalnischkies
We report warnings from apt-key this way already since 29c590951f812d9e9c4f17706e34f2c3315fb1f6, so reporting errors seems like a good addition. Most of those errors aren't really from apt-key through, but from the code setting up and actually calling it which used to just print to stderr which might or might not intermix them with (other) progress lines in update calls. Having them as proper error messages in the system means that the errors are actually collected later on for the list instead of ending up with our relatively generic but in those cases bogus hint regarding "is gpgv installed?". The effective difference is minimal as the errors apply mostly to systems which have far worse problems than a not as nice looking error message, which makes this pretty hard to test – but at least now the hint that your system is broken can be read in proper order (= there aren't many valid cases in which the permissions of /tmp are messed up…). LP: #1522988
2016-11-24skip unconfigure for unconfigured to-be removed pkgsDavid Kalnischkies
2016-11-24do not configure unconfigured to be removed packagesDavid Kalnischkies
We try to configure all packages at the end which need to be configured, but that also applies to packages which weren't completely installed (e.g. maintainerscript failed) we end up removing in this interaction instead. APT doesn't perform this explicit configure in the end as it is using "dpkg --configure --pending", but it does confuse the progress report and potentially also hook scripts. Regression-Of: 9ffbac99e52c91182ed8ff8678a994626b194e69
2016-11-24don't perform implicit crossgrades involving M-A:sameDavid Kalnischkies
dpkg stumbles over these (#844300) and we haven't dropped 'easier' removes to be implicit and to be scheduled by dpkg by default so far so we shouldn't push the decision in such cases to dpkg either.
2016-11-24improve arch-unqualified dpkg-progress parsingDavid Kalnischkies
Our old idea was to look for the first package which would be "touched" and take this as the package dpkg is talking about, but that is incorrect in complicated situations like a package upgraded to/from multiple M-A:same siblings installed. As we us the progress report to decide what is still needed we have to be reasonabily right about the package dpkg is talking about, so we jump to quite a few loops to get it.
2016-11-23correct cross & disappear progress detectionDavid Kalnischkies
Given that we use the progress information to skip over actions dpkg has already done like not purging a package which was already removed and had no config files or not acting on disappeared packages and such it is important that apt and dpkg agree on which states the package has to pass through. To ensure that we keep tabs on this in the future a warning is added at the end if apt hasn't seen all the action it was supposed to see. I can't wait for the first bugreporters to wonder about this…
2016-11-23react to trig-pend only if we have nothing else to doDavid Kalnischkies
If a package is triggered dpkg frequently issues two messages about it causing us to make a note about it both times which messes up our planned dpkg actions view. Adding these actions if we have nothing else planned fixes this and should still be correct as those planned actions will deal with the triggering just fine and we avoid strange problems like a package triggered before its removed…
2016-11-22Do not use MD5SumValue for Description_md5()Julian Andres Klode
Our profile says we spend about 5% of the time transforming the hex digits into the binary format used by HashsumValue, all for comparing them against the other strings. That makes no sense at all. According to callgrind, this reduces the overall instruction count from 5,3 billion to 5 billion in my example, which roughly matches the 5%.
2016-11-22debListParser: Micro-optimize AvailableDescriptionLanguages()Julian Andres Klode
Generating a string for each version we see is somewhat inefficient. The problem here is that the Description tag names are longer than 15 byte, and thus require an allocation on the heap, which we should avoid. It seems reasonable that 20 characters works for all languages codes used for archive descriptions, but if not, there's a warning, so we'll catch that. This should improve performance by about 2%.
2016-11-22Compare size before data when ordering cache bucket entriesJulian Andres Klode
This has the effect of significantly reducing actual string comparisons, and should improve the performance of FindGrp a bit, although it's hardly measureable (callgrind says it uses 10% instructions less now).
2016-11-22Optimize VersionHash() to not need temporary copy of inputJulian Andres Klode
Stop copying stuff, and just parse the bytes one by-one to the newly created AddCRC16Byte. This improves the instruction count for an update run from 720,850,121 to 455,801,749 according to callgrind.
2016-11-22Introduce tolower_ascii_unsafe() and use it for hashingJulian Andres Klode
This one has some obvious collisions for non-alphabetical characters, like some control characters also hashing to numbers, but we don't really have those, and these are hash functions which are not collision free to begin with.
2016-11-22Bump the cache major version for non-backportable changesJulian Andres Klode
We already have two stable series with major version 10, and the next commits will introduce non-backportable performance changes that affect the cache algorithms, so we need to bump the major version now to prevent future problems.
2016-11-22debListParser: Convert to use pkgTagSection::Key-based lookupJulian Andres Klode
This basically gets rid of 40-50% of the hash table lookups, making things a bit faster that way, and the profiles look far cleaner.
2016-11-22TagSection: Introduce functions for looking up by key idsJulian Andres Klode
Introduce a new enum class and add functions that can do a lookup with that enum class. This uses triehash.
2016-11-22TagSection: Extract Find() methods taking Pos instead of KeyJulian Andres Klode
This allows us to add a perfect hash function to the tag file without having to reimplement the methods a second time.
2016-11-22TagSection: Split AlphaIndexes into AlphaIndexes and BetaIndexesJulian Andres Klode
Move the use of the AlphaHash to a new second hash table in preparation for the arrival of the new perfect hash function. With the new perfect hash function hashing most of the keys for us, having 128 slots for a fallback hash function seems enough and prevents us from wasting space.
2016-11-11show distribution mismatch for changed codenamesDavid Kalnischkies
We have the last Release file around for other checks, so its trivial to look if the new Release file contains a new codename (e.g. the user has "testing" in the sources and it flipped from stretch to buster). Such a change can be okay and expected, but also be a hint of problems, so a warning if we see it happen seems okay. We can only print it once anyhow and frontends and co are likely to ignore/hide it.
2016-11-11don't warn if untransformed distribution matchesDavid Kalnischkies
A suite or codename entry in the Release file is checked against the distribution field in the sources.list entry that lead to the download of that Release file. This distribution entry can contain slashes in the distribution field: deb http://security.debian.org/debian wheezy/updates main However, the Release file may only contain "wheezy" in the Codename field and not "wheezy/updates". So a transformation needs to take place that removes the last / and everything that comes after (e.g. "/updates"). This fails, however, for valid cases like a reprepro snapshot where the given Codename contains slashes but is perfectly fine and doesn't need to be transformed. Since that transformation is essentially just a workaround for special cases like the security repository, it should be checked if the literal Codename without any transformations happened is valid and only if isn't the dist should be checked against the transformated one. This way special cases like security.debian.org are handled and reprepro snapshots work too. The initial patch was taken as insperationto move whole transformation to CheckDist() which makes this method more accepting & easier to use (but according to codesearch.d.n we are the only users anyhow). Thanks: Lukas Anzinger for initial patch Closes: 644610
2016-11-11add hidden config to set packages as Essential/ImportantDavid Kalnischkies
You can pretty much achieve the same with a local dummy package if you want to, but libapt has an inbuilt setting for essential: "apt" which can be overridden with this option as well – it could be helpful in quick tests and what not so adding this alternative shouldn't really hurt much. We aren't going to document them much through as care must be taken in regards to the binary caches as they aren't invalidated by config options alone, so the effects of old settings could still be in them, similar to the other already existing pkgCacheGen option(s). Closes: 767891 Thanks: Anthony Towns for initial patch
2016-11-11add TMP/TEMP/TEMPDIR to the TMPDIR DropPrivileges danceDavid Kalnischkies
apt tools do not really support these other variables, but tools apt calls might, so lets play save and clean those up as needed. Reported-By: Paul Wise (pabs) on IRC
2016-11-10support 'apt build-dep .' (aka: without /)David Kalnischkies
Reported-By: Christoph Berg (Myon) on IRC
2016-11-09rename Checksum-FileSize to Filesize in hashsum mismatchDavid Kalnischkies
Some people do not recognize the field value with such an arcane name and/or expect it to refer to something different (e.g. #839257). We can't just rename it internally as its an avoidance strategy as such fieldname existed previously with less clear semantics, but we can spare the general public from this implementation detail.
2016-11-09show the conflicting distribution warning againDavid Kalnischkies
Sometimes you should really act upon your todos. Especially if you have placed them directly in the code. Closes: 841874
2016-11-09reset HOME, USER(NAME), TMPDIR & SHELL in DropPrivilegesDavid Kalnischkies
We can't cleanup the environment like e.g. sudo would do as you usually want the environment to "leak" into these helpers, but some variables like HOME should really not have still the value of the root user – it could confuse the helpers (USER) and HOME isn't accessible anyhow. Closes: 842877
2016-11-09fix three typos in sources & manpagesChris Leick
2016-11-09add support for Build-Depends/Conflicts-ArchJohannes Schauer
These new enum values might cause "interesting" behaviour in tools not expecting them – like an old apt would think a Build-Conflicts-Arch is some sort of Build-Depends – but that can't reasonably be avoided and effects only packages using B-D/C-A so if there is any breakage the tools can easily be adapted. The APT_PKG_RELEASE number is increased so that libapt users can detect the availability of these new enum fields via: #if APT_PKG_ABI > 500 || (APT_PKG_ABI == 500 && APT_PKG_RELEASE >= 1) Closes: #837395
2016-11-02keep Release.gpg on untrusted to trusted IMS-HitDavid Kalnischkies
A user relying on the deprecated behaviour of apt-get to accept a source with an unknown pubkey to install a package containing the key expects that the following 'apt-get update' causes the source to be considered as trusted, but in case the source hadn't changed in the meantime this wasn't happening: The source kept being untrusted until the Release file was changed. This only effects sources not using InRelease and only apt-get, the apt binary downright refuses this course of actions, but it is a common way of adding external sources. Closes: 838779
2016-10-04Do not read stderr from proxy autodetection scriptsJulian Andres Klode
This fixes a regression introduced in commit 8f858d560e3b7b475c623c4e242d1edce246025a don't leak FD in AutoProxyDetect command return parsing which accidentally made the proxy autodetection code also read the scripts output on stderr, not only on stdout when it switched the code from popen() to Popen(). Reported-By: Tim Small <tim@seoss.co.uk>
2016-09-18VersionHash: Do not skip too long dependency linesJulian Andres Klode
If the dependency line does not contain spaces in the repository but does in the dpkg status file (because dpkg normalized the dependency list), the dpkg line might be longer than the line in the repository. If it now happens to be longer than 1024 characters, it would be skipped, causing the hashes to be out of date. Note that we have to bump the minor cache version again as this changes the format slightly, and we might get mismatches with an older src cache otherwise. Fixes Debian/apt#23
2016-09-11Coverage: Do not print messages from gcovJulian Andres Klode
We need to ignore messages from gcov. All those messages start with profiling: and are printed using vfprintf(), so the only thing we can do is add a library overriding those functions and linking apt-pkg to it.