| Age | Commit message (Collapse) | Author |
|---|
|
The exception was made to give (script) users a one-release grace period
to adapt their setup to deal with apt enforcing signing of repositories.
As we are now at the start of a new release cycle its as good a time as
any to lift it now.
Removes-Exception: 952ee63b0af14a534c0aca00c11d1a99be6b22b2
|
|
We are in a dilemma here: The regression of sorts was introduced in 2013
with commit d8a8f9d7f0 allowing pkg modifiers for the upgrade commands.
That calls the autoremover as a sideeffect through and with it comes the
option to remove the garbage packages in these commands (similar to aptitude).
Having the option on the commandline is no problem – people aren't going
to request what they don't want (or so I hope), but the documentation
explicitly states that this option only effects install/remove and
mentions a config knob users might use and expect to not suddenly apply
(especially without documentation) to more commands.
Just reverting the commit is out of question, completely ignoring the
option breaks the workflow of every user who happened to use
--autoremove on the commandline for upgrade and expects that to work
given that it was accepted and worked in a stable release. Changing the
documentation to reflect reality while perhaps the simplest and cleanest
option contradicts freeze and is a surprising change we tend to avoid
like the plague while just leaving it be confuses all users who end up
believing the documentation even if was different in the last 3 years.
So what we do is a tricky compromise: The configuration option if read
from a file does apply only for install/remove as documented, while if
the option is encountered on the commandline it is accepted and applies
to the upgrade which should make 99% of the users happy. The rest has to
wait for us to figure out for buster how to get that documented and
implemented in a saner way.
Closes: #855891
|
|
The idea is simple: Each¹ Find*( call starts with a call check if the
given option (with the requested type) exists in the whitelist. The
whitelist is specified via our configure-index file so that we have
a better chance at keeping it current. the whitelist is loaded via a
special (undocumented for now) configuration stanza and if none is
loaded the empty whitelist will make it so that no warnings are shown.
Much needs to be done still, but that is as good a time as any to take a
snapshot of the current state and release it into the wild given that it
found some bugs already and has no practical effect on users.
¹ not all in this iteration, but many
|
|
The implementation is quite different compared to --arch-only due to ABI
reasons but functionality wise they are similar and usually both
available for symmetry at least.
Closes: #845775
|
|
I probably missed that when I did the usability work. But better
late than never.
|
|
We support "./foobar.deb" as a way to install a deb file directly.
Recently .changes files were added. This highlights a problem as you
can't add the changes file without also trying to install all of them.
Now, it could also be handy to add entire Packages/Sources files to
perhaps get a bunch of packages in without installing them all
implicitly.
This commit introduces --with-source which allows to add *.deb, *.changes,
*.dsc, source-dirs, Packages & Sources files (the later can also be
compressed) without also installing them.
|
|
Julian noticed on IRC that I fall victim to a lovely false friend by
calling referring to a 'planer' all the time even through these are
machines to e.g. remove splinters from woodwork ("make stuff plane").
The term I meant is written in german in this way (= with a single n)
but in english there are two, aka: 'planner'.
As that is unreleased code switching all instances without any
transitional provisions. Also the reason why its skipped in changelog.
Thanks: Julian Andres Klode
Gbp-Dch: Ignore
|
|
Testing the current implementation can benefit from being able to be
feed an EIPP request and produce a fully compliant response. It is also
a great test for EIPP in general.
|
|
The very first step in introducing the "external installation planer
protocol" (short: EIPP) as part of my GSoC2016 project.
The description reads: APT-based tools like apt-get, aptitude, synaptic,
… work with the user to figure out how their system should look like
after they are done installing/removing packages and their dependencies.
The actual installation/removal of packages is done by dpkg with the
constrain that dependencies must be fulfilled at any point in time (e.g.
to run maintainer scripts).
Historically APT has a super micro-management approach to this task
which hasn't aged that well over the years mostly ignoring changes in
dpkg and growing into an unmaintainable mess hardly anyone can debug and
everyone fears to touch – especially as more and more requirements are
tacked onto it like handling cycles and triggers, dealing with
"important" packages first, package sources on removable media, touch
minimal groups to be able to interrupt the process if needed (e.g.
unattended-upgrades) which not only sky-rocket complexity but also can
be mutually exclusive as you e.g. can't have minimal groups and minimal
trigger executions at the same time.
|
|
Weak had no dedicated option before and Insecure and Downgrade were both
global options, which given the effect they all have on security is
rather bad. Setting them for individual repositories only isn't great
but at least slightly better and also more consistent with other
settings for repositories.
|
|
With this commit all APT-based clients default to refusing to work with
unsigned or otherwise insufficently secured repositories. In terms of
apt and apt-get this changes nothing, but it effects all tools using
libapt like aptitude, synaptic or packagekit.
The exception remains apt-get for stretch for now as this might break
too many scripts/usecases too quickly.
The documentation is updated and extended to reflect how to opt out or
in on this behaviour change.
Closes: 808367
|
|
Most (if not all) solvers should be able to run perfectly fine without
root privileges as they get the entire state they are supposed to work
on via stdin and do not perform any action directly, but just pass
suggestions on via stdout.
The new default is to run them all as _apt hence, but each solver can
configure another user if it chooses/must. The security benefits are
minimal at best, but it helps preventing silly mistakes (see
35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good.
Note that our 'apt' and 'dump' solver already dropped privileges if they
had them.
|
|
For bugreports and co it could be handy to have the scenario and all the
settings used in it around later for inspection for EDSP like protocols.
EDSP might not be the most interesting as the user can still interrupt
the process before the solution is applied and users tend to have an
opinion on the "rightness" of a solution, so it is disabled by default.
|
|
Broken in e7e10e47476606e3b2274cf66b1e8ea74b236757 by looking always
into "apt" while we ship some tools in "apt-utils"…
|
|
This allows passing compressing the output. The compressor must
be a compressor name, extension, or an extension without the
leading dot.
|
|
This option controls if downloaded packages should be kept after
a successful install or if they should be deleted. The default
for "apt-get" is that they are kept (just like before).
However the default for "apt" is that they get deleted.
Closes: #160743
|
|
Passing function pointers around while working on this was very icky,
but if weak symbols are too much to ask for…
Reverts "do not use "-Wl,-Bsymbolic-functions" during the build to avoid
breakage" aka a5fc9be36211a290a7abc3ca2a8bf98943bc1f57.
|
|
This reverts commit 7ac9386cb6e272625490fcf3e8183b45e28bbc43.
|
|
This reverts commit 28f24d3dad1844af316337d565ba2ebc11c8ce97.
This fails on Ubuntu as they build with -Bsymbolic-functions.
|
|
Closes: #806422
|
|
The general idea is: A small paragraph on the tool itself as a
description, a list of the most used (!= all) commands available in the
tool, a remark where to find more information on the tool and its
commands (aka: in the manpage) and finally a common block referring to
even more manpages. In exchange options are completely omitted from the
output as well as deprecated or obscure commands. (Better) Information
about them is available in the manpages anyway and the few options which
were listed before were also the least interesting ones (-o -c -q and co
are hardly of interest for someone totally new looking to find info by
asking for help and anyone with a bit of experience doesn't need this
short list. Those would need a list of options applying to the command
they call, but they are too numerous and command specific to list them
sanely in this context.
|
|
We can't for compatibility reasons in apt-cache, but apt can.
Closes: 218995
|
|
Git-Dch: Ignore
|
|
Its not as simple as I initially thought to abstract this enough to make
it globally usable, so lets not pollute global namespace with this for
now.
Git-Dch: Ignore
|
|
This ensures that location strings loaded from a location specified via
configuration (Dir::Locale) effect the help messages for commands.
Git-Dch: Ignore
|
|
All mains pretty much do the same thing, so lets try a little harder to
move the common parts into -private to have the real differences more
visible.
Git-Dch: Ignore
|
|
That is one huge commit with busy work only: Help messages used to be
one big translateable string, which is a pain for translators and hard
to reuse for us. This change there 'explodes' this single string into
new string for each documented string trying hard to split up the
translated messages as well. This actually restores many translations as
previously adding a single command made all of the bug message fuzzy.
The splitup also highlighted that its easy to forget a line, duplicate
one and similar stuff.
Git-Dch: Ignore
|
|
apt is an interactive command and the reasons we haven't this option set
for everything is mostly in keeping compatibility for a little while
longer to allow scripts to be changed if need be.
|
|
Git-Dch: Ignore
|
|
The show commands have different styles in both binaries as the audience
is potentially very different, but that doesn't mean we need to separate
the implementation especially as they are slightly similar. This also
allows us to switch between the different show versions at runtime via
an option.
Git-Dch: Ignore
|
|
Especially with apt now, it can be useful to set an option only for apt
and not for apt-get. Using a binary-specific subtree which is merged into
the root seems like a simple enough trick to achieve this.
|
|
As we have support for 'hold', we need support for undoing a hold which
in effect means that we implemented most other states as well, just that
they weren't exposed in the interface directly so far.
|
|
This makes things much easier to use
|
|
Thanks: Steve Slangasek for the suggestion
Closes: 695633
|
|
Some people type them instead of autoremove and autoclean, so make
them happy.
Closes: #274159
Makes-Happy: Ansgar
|
|
This enables more fine grained control over such exceptions.
|
|
It's a tiny diff, so why not? But no need to document it.
Closes: #787846
|
|
Before MultiArch implicits weren't a thing, so they were hidden by
default by definition. Adding them for MultiArch solved many problems,
but having no reliable way of detecting which dependency (and provides)
is implicit or not causes problems everytime we want to output
dependencies without confusing our observers with unneeded
implementation details.
The really notworthy point here is actually that we keep now a better
record of how a dependency came to be so that we can later reason about
it more easily, but that is hidden so deep down in the library internals
that change is more the problems it solves than the change itself.
|
|
'files' is a bit too generic as a name for a command usually only used
programmatically (if at all) by developers, so instead of "wasting" this
generic name for this we use "indextargets" which is actually the name
of the datastructure the displayed data is stored in.
Along with this rename the config options are renamed accordingly.
|
|
Selecting targets based on the Release they belong to isn't to
unrealistic. In fact, it is assumed to be the most used case so it is
made the default especially as this allows to bundle another thing we
have to be careful with: Filenames and only showing targets we have
acquired.
Closes: 752702
|
|
Downloading additional files is only half the job. We still need a way
to allow external tools to know where the files are they requested for
download given that we don't want them to choose their own location.
'apt-get files' is our answer to this showing by default in a deb822
format information about each IndexTarget with the potential to filter
the records based on lines and an option to change the output format.
The command serves also as an example on how to get to this information
via libapt.
|
|
You would think one instance of this is enough, but
80e8d923ebc8d5f3f84eb3f922b28ca309c25026 wasn't as
globally applied as the commit message suggested…
LP: #1399037
|
|
By convention, if I run a tool with --help or --version I expect it to
exit successfully with the usage, while if I do call it wrong (like
without any parameters) I expect the usage message shown with a non-zero
exit.
|
|
The conversion to accept only relevant options for commands has
forgotten another one, so adding it again even through the usecase might
very well be equally good served by --print-uris.
Closes: 742578
|
|
The configuration key Acquire::AllowInsecureRepositories controls if
apt allows loading of unsigned repositories at all.
The configuration Acquire::AllowDowngradeToInsecureRepositories
controls if a signed repository can ever become unsigned. This
should really never be needed but we provide it to avoid having
to mess around in /var/lib/apt/lists if there is a use-case for
this (which I can't think of right now).
|
|
apt-cache search supported this since ever and in the code for apt was a
fixme indicating this should be added here as well, so here we go.
|
|
dist-upgrade is supposed to be an alias for full-upgrade in apt, but
dist-upgrade was the only command recognized of the two in the option
and flags recognition code.
|
|
Git-Dch: Ignore
Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
Git-Dch: Ignore
Reported-By: gcc -Wmissing-declarations
|
