| Age | Commit message (Collapse) | Author |
|---|
|
That was the case already for tar-only and diff-only, but in a more
confusing way and without a message while dsc "worked" before resulting
in a dpkg-source error shortly after as tar/diff files aren't available…
|
|
These new enum values might cause "interesting" behaviour in tools not
expecting them – like an old apt would think a Build-Conflicts-Arch is
some sort of Build-Depends – but that can't reasonably be avoided and
effects only packages using B-D/C-A so if there is any breakage the
tools can easily be adapted.
The APT_PKG_RELEASE number is increased so that libapt users can detect
the availability of these new enum fields via:
#if APT_PKG_ABI > 500 || (APT_PKG_ABI == 500 && APT_PKG_RELEASE >= 1)
Closes: #837395
|
|
In effect this is an extension of the 6 years old commit
a8dfff90aa740889eb99d00fde5d70908d9fd88a which uses the autoremover to
remove packages again from the solution which are no longer needed to be
there. Commonly these are dependencies of packages we end up not
installed due to problem resolver decisions. Slightly less common is
the situation we deal with here: a package which we wanted to upgrade
sporting a new dependency, but ended up holding back.
The problem is that all versions of an installed reverse dependencies can
bring back a "garbage" package – we need to do this as there is
nothing inherently wrong in having garbage packages installed or upgrade
them, which itself would have garbage dependencies, so just blindly
killing all new garbage packages would prevent the upgrade (and actually
generate errors). What we should be doing is looking only at the version
we will have on the system, disregarding all old/new reverse dependencies.
Reported-By: Stuart Prescott (themill) on IRC
|
|
Commit b60c8a89c281f2bb945d426d2215cbf8f5760738 improved the situation,
but due to inconsistency mostly for planners, not for solvers. As the
idea of hiding errors if we show another error is a bit scary (as the
extern error might be a followup of our intern error, rather than the
reason for our intern error as it is at the moment) we don't discard the
errors, but if we got an extern error we show them directly removing
them from the error list at the end of the run – that list will contain
the extern error which hopefully gives us the best of both worlds.
The problem itself is the same as before: The externals exiting before
apt is done talking to them.
Reported-By: Johannes 'josch' Schauer on IRC
|
|
|
|
I probably missed that when I did the usability work. But better
late than never.
|
|
On FreeBSD, we have to include sys/params.h and sys/mount.h,
not sys/vfs.h.
Gbp-Dch: ignore
|
|
Several modules use std::array without including the
array header. Bad modules.
Some modules use STDOUT_FILENO and friends, or close()
without including unistd.h, where they are defined.
One module also uses WIFEXITED() without including
sys/wait.h.
Finally, environ is not specified to be defined in unistd.h. We
are required to define it ourselves according to POSIX, so let's
do that.
|
|
We support "./foobar.deb" as a way to install a deb file directly.
Recently .changes files were added. This highlights a problem as you
can't add the changes file without also trying to install all of them.
Now, it could also be handy to add entire Packages/Sources files to
perhaps get a bunch of packages in without installing them all
implicitly.
This commit introduces --with-source which allows to add *.deb, *.changes,
*.dsc, source-dirs, Packages & Sources files (the later can also be
compressed) without also installing them.
|
|
Bye, bye, old friend.
|
|
This causes build failures when turning translations off.
|
|
Introduce an initial CMake buildsystem. This build system can build
a fully working apt system without translation or documentation.
The FindBerkelyDB module is from kdelibs, with some small adjustements
to also look in db5 directories.
Initial work on this CMake build system started in 2009, and was
resumed in August 2016.
|
|
While autotools defines all macros to 1 explicitly, CMake only
defines them without a value. In such a case, #if fails with an
error and #ifdef works.
In preparation for a possible switch to CMake and to clean up
the code (rest uses #ifdef), use #ifdef here
|
|
Followup of b58e2c7c56b1416a343e81f9f80cb1f02c128e25.
Still a regression of sorts of 8b79c94af7f7cf2e5e5342294bc6e5a908cacabf.
Closes: 832044
|
|
If the sources file we want to edit doesn't exist yet GetLock will
create it with 640, which for a generic lockfile might be okay, but as
this is a sources file more relaxed permissions are in order – and
actually required as it wont be readable for unprivileged users causing
warnings/errors in apt calls.
Reported-By: J. Theede (musca) on IRC
|
|
After editing the sources it is a good idea to (re)built the caches as
they will be out-of-date and doing so helps in reporting higherlevel
errors like duplicates sources.list entries, too, instead of just
general parsing errors as before.
|
|
We support installing ./foo.deb (and ./foo.dsc for source) for a while
now, but it can be a bit clunky to work with those directly if you e.g.
build packages locally in a 'central' build-area.
The changes files also include hashsums and can be signed, so this can
also be considered an enhancement in terms of security as a user "just"
has to verify the signature on the changes file then rather than
checking all deb files individually in these manual installation
procedures.
|
|
Julian noticed on IRC that I fall victim to a lovely false friend by
calling referring to a 'planer' all the time even through these are
machines to e.g. remove splinters from woodwork ("make stuff plane").
The term I meant is written in german in this way (= with a single n)
but in english there are two, aka: 'planner'.
As that is unreleased code switching all instances without any
transitional provisions. Also the reason why its skipped in changelog.
Thanks: Julian Andres Klode
Gbp-Dch: Ignore
|
|
Testing the current implementation can benefit from being able to be
feed an EIPP request and produce a fully compliant response. It is also
a great test for EIPP in general.
|
|
The very first step in introducing the "external installation planer
protocol" (short: EIPP) as part of my GSoC2016 project.
The description reads: APT-based tools like apt-get, aptitude, synaptic,
… work with the user to figure out how their system should look like
after they are done installing/removing packages and their dependencies.
The actual installation/removal of packages is done by dpkg with the
constrain that dependencies must be fulfilled at any point in time (e.g.
to run maintainer scripts).
Historically APT has a super micro-management approach to this task
which hasn't aged that well over the years mostly ignoring changes in
dpkg and growing into an unmaintainable mess hardly anyone can debug and
everyone fears to touch – especially as more and more requirements are
tacked onto it like handling cycles and triggers, dealing with
"important" packages first, package sources on removable media, touch
minimal groups to be able to interrupt the process if needed (e.g.
unattended-upgrades) which not only sky-rocket complexity but also can
be mutually exclusive as you e.g. can't have minimal groups and minimal
trigger executions at the same time.
|
|
Closes: 825216
|
|
Weak had no dedicated option before and Insecure and Downgrade were both
global options, which given the effect they all have on security is
rather bad. Setting them for individual repositories only isn't great
but at least slightly better and also more consistent with other
settings for repositories.
|
|
If apt decides it can't download a file it is relatively pointless to
try to tell dpkg-source to unpack it.
|
|
With this commit all APT-based clients default to refusing to work with
unsigned or otherwise insufficently secured repositories. In terms of
apt and apt-get this changes nothing, but it effects all tools using
libapt like aptitude, synaptic or packagekit.
The exception remains apt-get for stretch for now as this might break
too many scripts/usecases too quickly.
The documentation is updated and extended to reflect how to opt out or
in on this behaviour change.
Closes: 808367
|
|
Most (if not all) solvers should be able to run perfectly fine without
root privileges as they get the entire state they are supposed to work
on via stdin and do not perform any action directly, but just pass
suggestions on via stdout.
The new default is to run them all as _apt hence, but each solver can
configure another user if it chooses/must. The security benefits are
minimal at best, but it helps preventing silly mistakes (see
35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good.
Note that our 'apt' and 'dump' solver already dropped privileges if they
had them.
|
|
|
|
For bugreports and co it could be handy to have the scenario and all the
settings used in it around later for inspection for EDSP like protocols.
EDSP might not be the most interesting as the user can still interrupt
the process before the solution is applied and users tend to have an
opinion on the "rightness" of a solution, so it is disabled by default.
|
|
In 8b79c94af7f7cf2e5e5342294bc6e5a908cacabf changing to usage of C++ way
of setting the locale causes us to be terminated in case of usage of an
ungenerated locale as LC_ALL (or similar) – but we don't want to fail
here, we just want to carry on as before with setlocale which we call in
that case just for good measure.
|
|
It is a try as the we need to inspect SUDO_COMMAND which could be
anything – apt, apt-get, in /usr/bin, in a $DPKG_ROOT "chroot", build
from source, aliases, …
The best we can do is look if the SHELL variable is equal to the
SUDO_COMMAND which would mean a shell was invoked. That isn't fail-safe
if different shells are involved as sub-shells have the tendency of not
overriding the SHELL so a bash started from within zsh can happily
pretend to be still zsh, so we could have a look at /etc/shells for a
list, but oh well, we have to stop somewhere I guess.
This sudo-prefixing feature is a gimmick after all.
Closes: 825742
|
|
Broken in e7e10e47476606e3b2274cf66b1e8ea74b236757 by looking always
into "apt" while we ship some tools in "apt-utils"…
|
|
We use a wild mixture of C and C++ ways of generating output, so having
a consistent world-view in both styles sounds like a good idea and
should help in preventing regressions.
|
|
Setting the C++ locale via std::locale::global(std::locale("")); which
would otherwise default to the default C locale (aka: unaffected by
setlocale) effects the formatting of numeric types in IO streams, which
for output for humans is perfectly sensible, but breaks our many text
interfaces used and parsed by us and others without expecting the
numbers to be formatted.
Closes: #825396
|
|
The code moving in eb1f04dda07c2b69549ad9fd793cca0e91841b3e
moved the acquire stuff above the simulation exit, so before getting
locks (and creating/chmod directories) we should be checking if we
should actually really do it…
[ignore as bugfix of an unreleased commit]
Git-Dch: Ignore
|
|
The report mentions "apt list --upgradable", but there are others which
have inconsistent behavior ranging from segfaulting to doing something
with the partial (and hence incomplete) data. We had a recent report
about sources.list (#818628), this one mentions prefences, the obvious
next step is conf files… so the testcase is adapted to check for all
three in file and directory versions and run a bunch of commands each
time which should all have more or less the same behavior in such a case
(aka error out).
Closes: 824503
|
|
This commit moves the creation of the fetcher and with it the
calculation of the filenames before the code generation the various
lists detailing the solution. This means that simulation comes even so
slightly closer to a real run as it will require and parse the package
indexes for filenames and queuing of URIs, so that a simulation "using"
an unavailable download method actually fails now.
The real benefit of this change is through that the rather special but
nontheless handy --no-download --fix-missing mode now actually shows
what the solution is it will apply to the system rather than the
solution it would if it could download all not-downloaded packages.
|
|
Errors cause a kind of automatic no already, but warnings and notices
are only displayed at the end of the apt execution even through they
could effect the choice of saying yes/no to questions: E.g. if a
configuration (file) was ignored you wanted to have an effect or if an
external solver you used generated warnings suggesting that the solution
might be valid, but bogus non-the-less and similar things.
Note that this only moves those messages up to the question if the
answer is interactive – not if e.g. -y is used or no question is asked at
all so this has an effect only on interactive usage of apt(-get), not
script who might be parsing apt output.
|
|
|
|
The old prettyprinters have only access to the struct they pretty print,
which isn't enough usually as we want to know for a package also a bit
of state information like which version is the candidate.
We therefore need to pull the DepCache into context and hence use a
temporary struct which is printed instead of the iterator itself.
|
|
This does not make much sense anymore, now that we dropped the
old candidate ver algorithm.
|
|
Together with the GlobalError change this allows us to add errors
spanning multiple lines, just that we control GlobalError while the
acquire progress is dealt with potentially by individual clients which
might or might not need to be adapted.
This isn't critical through as it either just works as expected anyhow
or is a minor styling thing (after all, all this commit does it add two
spaces to indent the lines a bit…).
|
|
This is a duplicate of sorts of 0efb29eb36184bbe6de7b1013d1898796d94b171
which is the a lot more frequent case of this error – and also a
duplicate of this error message, just without the \n at the end.
Git-Dch: Ignore
|
|
In a249b3e6fd798935a02b769149c9791a6fa6ef16 I dropped with the manual
first resolver step also the support for installing build-deps as
automatic in such a way that it behaved like this option was enabled by
default.
Restoring support for it means that we go back to mark build-
dependencies as manually installed again by default and provide this
option to keep them as automatically installed.
|
|
If pkgAcqChangelog is told to acquire the changelog for a version it
will check first if this version is installed on the disk and if so will
use the local changelog in /usr/share/doc (possibily/likely gz
compressed) instead of downloading the file from the web.
An option is provided to disable this, which is enabled by default for
the Ubuntu vendor as they truncate the local changelogs – and for apts
--print-uris action.
|
|
Regression introduced in a249b3e6fd798935a02b769149c9791a6fa6ef16, which
in the case of an invalid cache would build the first part unlocked and
later pick up the (still unlocked) cache for further processing, so the
system got never locked and apt would end up complaining about being
unable to release the lock at shutdown.
The far more common case of having a valid cache worked as expected and
hence covered up the problem – especially as tests who would have
noticed it are simulations only, which do not lock.
Closes: 814139
Reported-By: Balint Reczey <balint@balintreczey.hu>
Reported-By: Helmut Grohne <helmut@subdivi.de> on IRC
|
|
We don't need the dependencies for obvious reasons and we don't need the
candidate version either, so building a pkgDepCache is wasted effort,
which we can stop doing now that build-dep cleared the path.
|
|
The later just calls the earlier, but the later needs the fullblown
dependency cache to be initialized, which is a very costly operation and
isn't done anymore that early in the run as we would need to throw away
and rebuild it again after we got all the information about source pkgs.
As we end up with a nullptr for the pkgDepCache, we use a slightly
longer calling convention to make sure that we use the pkgCache
directly, avoiding nullptr induced segfaults and costly operations.
Git-Dch: Ignore
Reported-By: Balint Reczey <balint@balintreczey.hu>
|
|
It's a fairly expensive call and it's called on every package,
even though it's usually only used when we're interested in
a small number of packages.
Long description is currently only shown by this function
when using `apt search X --full`.
On my PC, this patch speeds up `apt list` by roughly 20%
and `apt list --installed` by 1-2%.
|
|
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected
the incorrect overriding of earlier better-fitting results with later
(semi-)matches – but that broke the case in which packages are in multiple
releases in the same version (and the user has both releases configured).
Closes: 812497
|
|
build-dep was implemented by parsing the build-dependencies of a package
and figuring out which packages to install/remove based on this. That
means that for the first level of dependencies build-dep was
implementing its very own resolver with all the benefits (aka: bugs)
this gives us for not using the existing resolver for all levels.
Making this work involves generating a dummy binary package with fitting
Depends and Conflicts and as we can't create them out of thin air the
cache generation needs to be involved so we end up writing a Packages
file which we want to parse – after we have parsed the other Packages
files already. With .dsc/.deb files we could add them before we started
parsing anything.
With a bit of care we can avoid generating too much data we have to
throw away again (as many parts assume that e.g. the count of packages
doesn't change midair), so that on a speed front there shouldn't be
much of a difference, but output can be slightly confusing as if we have
a completely valid cache on disk the "Reading package lists... Done" is
printed two times – but apt is pretty quick about it in that case.
Closes: #137560, #444930, #489911, #583914, #728317, #812173
|
|
Git-Dch: Ignore
|
