| Age | Commit message (Collapse) | Author |
|---|
|
Weak had no dedicated option before and Insecure and Downgrade were both
global options, which given the effect they all have on security is
rather bad. Setting them for individual repositories only isn't great
but at least slightly better and also more consistent with other
settings for repositories.
|
|
If apt decides it can't download a file it is relatively pointless to
try to tell dpkg-source to unpack it.
|
|
With this commit all APT-based clients default to refusing to work with
unsigned or otherwise insufficently secured repositories. In terms of
apt and apt-get this changes nothing, but it effects all tools using
libapt like aptitude, synaptic or packagekit.
The exception remains apt-get for stretch for now as this might break
too many scripts/usecases too quickly.
The documentation is updated and extended to reflect how to opt out or
in on this behaviour change.
Closes: 808367
|
|
Most (if not all) solvers should be able to run perfectly fine without
root privileges as they get the entire state they are supposed to work
on via stdin and do not perform any action directly, but just pass
suggestions on via stdout.
The new default is to run them all as _apt hence, but each solver can
configure another user if it chooses/must. The security benefits are
minimal at best, but it helps preventing silly mistakes (see
35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good.
Note that our 'apt' and 'dump' solver already dropped privileges if they
had them.
|
|
|
|
For bugreports and co it could be handy to have the scenario and all the
settings used in it around later for inspection for EDSP like protocols.
EDSP might not be the most interesting as the user can still interrupt
the process before the solution is applied and users tend to have an
opinion on the "rightness" of a solution, so it is disabled by default.
|
|
In 8b79c94af7f7cf2e5e5342294bc6e5a908cacabf changing to usage of C++ way
of setting the locale causes us to be terminated in case of usage of an
ungenerated locale as LC_ALL (or similar) – but we don't want to fail
here, we just want to carry on as before with setlocale which we call in
that case just for good measure.
|
|
It is a try as the we need to inspect SUDO_COMMAND which could be
anything – apt, apt-get, in /usr/bin, in a $DPKG_ROOT "chroot", build
from source, aliases, …
The best we can do is look if the SHELL variable is equal to the
SUDO_COMMAND which would mean a shell was invoked. That isn't fail-safe
if different shells are involved as sub-shells have the tendency of not
overriding the SHELL so a bash started from within zsh can happily
pretend to be still zsh, so we could have a look at /etc/shells for a
list, but oh well, we have to stop somewhere I guess.
This sudo-prefixing feature is a gimmick after all.
Closes: 825742
|
|
Broken in e7e10e47476606e3b2274cf66b1e8ea74b236757 by looking always
into "apt" while we ship some tools in "apt-utils"…
|
|
We use a wild mixture of C and C++ ways of generating output, so having
a consistent world-view in both styles sounds like a good idea and
should help in preventing regressions.
|
|
Setting the C++ locale via std::locale::global(std::locale("")); which
would otherwise default to the default C locale (aka: unaffected by
setlocale) effects the formatting of numeric types in IO streams, which
for output for humans is perfectly sensible, but breaks our many text
interfaces used and parsed by us and others without expecting the
numbers to be formatted.
Closes: #825396
|
|
The code moving in eb1f04dda07c2b69549ad9fd793cca0e91841b3e
moved the acquire stuff above the simulation exit, so before getting
locks (and creating/chmod directories) we should be checking if we
should actually really do it…
[ignore as bugfix of an unreleased commit]
Git-Dch: Ignore
|
|
The report mentions "apt list --upgradable", but there are others which
have inconsistent behavior ranging from segfaulting to doing something
with the partial (and hence incomplete) data. We had a recent report
about sources.list (#818628), this one mentions prefences, the obvious
next step is conf files… so the testcase is adapted to check for all
three in file and directory versions and run a bunch of commands each
time which should all have more or less the same behavior in such a case
(aka error out).
Closes: 824503
|
|
This commit moves the creation of the fetcher and with it the
calculation of the filenames before the code generation the various
lists detailing the solution. This means that simulation comes even so
slightly closer to a real run as it will require and parse the package
indexes for filenames and queuing of URIs, so that a simulation "using"
an unavailable download method actually fails now.
The real benefit of this change is through that the rather special but
nontheless handy --no-download --fix-missing mode now actually shows
what the solution is it will apply to the system rather than the
solution it would if it could download all not-downloaded packages.
|
|
Errors cause a kind of automatic no already, but warnings and notices
are only displayed at the end of the apt execution even through they
could effect the choice of saying yes/no to questions: E.g. if a
configuration (file) was ignored you wanted to have an effect or if an
external solver you used generated warnings suggesting that the solution
might be valid, but bogus non-the-less and similar things.
Note that this only moves those messages up to the question if the
answer is interactive – not if e.g. -y is used or no question is asked at
all so this has an effect only on interactive usage of apt(-get), not
script who might be parsing apt output.
|
|
|
|
The old prettyprinters have only access to the struct they pretty print,
which isn't enough usually as we want to know for a package also a bit
of state information like which version is the candidate.
We therefore need to pull the DepCache into context and hence use a
temporary struct which is printed instead of the iterator itself.
|
|
This does not make much sense anymore, now that we dropped the
old candidate ver algorithm.
|
|
Together with the GlobalError change this allows us to add errors
spanning multiple lines, just that we control GlobalError while the
acquire progress is dealt with potentially by individual clients which
might or might not need to be adapted.
This isn't critical through as it either just works as expected anyhow
or is a minor styling thing (after all, all this commit does it add two
spaces to indent the lines a bit…).
|
|
This is a duplicate of sorts of 0efb29eb36184bbe6de7b1013d1898796d94b171
which is the a lot more frequent case of this error – and also a
duplicate of this error message, just without the \n at the end.
Git-Dch: Ignore
|
|
In a249b3e6fd798935a02b769149c9791a6fa6ef16 I dropped with the manual
first resolver step also the support for installing build-deps as
automatic in such a way that it behaved like this option was enabled by
default.
Restoring support for it means that we go back to mark build-
dependencies as manually installed again by default and provide this
option to keep them as automatically installed.
|
|
If pkgAcqChangelog is told to acquire the changelog for a version it
will check first if this version is installed on the disk and if so will
use the local changelog in /usr/share/doc (possibily/likely gz
compressed) instead of downloading the file from the web.
An option is provided to disable this, which is enabled by default for
the Ubuntu vendor as they truncate the local changelogs – and for apts
--print-uris action.
|
|
Regression introduced in a249b3e6fd798935a02b769149c9791a6fa6ef16, which
in the case of an invalid cache would build the first part unlocked and
later pick up the (still unlocked) cache for further processing, so the
system got never locked and apt would end up complaining about being
unable to release the lock at shutdown.
The far more common case of having a valid cache worked as expected and
hence covered up the problem – especially as tests who would have
noticed it are simulations only, which do not lock.
Closes: 814139
Reported-By: Balint Reczey <balint@balintreczey.hu>
Reported-By: Helmut Grohne <helmut@subdivi.de> on IRC
|
|
We don't need the dependencies for obvious reasons and we don't need the
candidate version either, so building a pkgDepCache is wasted effort,
which we can stop doing now that build-dep cleared the path.
|
|
The later just calls the earlier, but the later needs the fullblown
dependency cache to be initialized, which is a very costly operation and
isn't done anymore that early in the run as we would need to throw away
and rebuild it again after we got all the information about source pkgs.
As we end up with a nullptr for the pkgDepCache, we use a slightly
longer calling convention to make sure that we use the pkgCache
directly, avoiding nullptr induced segfaults and costly operations.
Git-Dch: Ignore
Reported-By: Balint Reczey <balint@balintreczey.hu>
|
|
It's a fairly expensive call and it's called on every package,
even though it's usually only used when we're interested in
a small number of packages.
Long description is currently only shown by this function
when using `apt search X --full`.
On my PC, this patch speeds up `apt list` by roughly 20%
and `apt list --installed` by 1-2%.
|
|
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected
the incorrect overriding of earlier better-fitting results with later
(semi-)matches – but that broke the case in which packages are in multiple
releases in the same version (and the user has both releases configured).
Closes: 812497
|
|
build-dep was implemented by parsing the build-dependencies of a package
and figuring out which packages to install/remove based on this. That
means that for the first level of dependencies build-dep was
implementing its very own resolver with all the benefits (aka: bugs)
this gives us for not using the existing resolver for all levels.
Making this work involves generating a dummy binary package with fitting
Depends and Conflicts and as we can't create them out of thin air the
cache generation needs to be involved so we end up writing a Packages
file which we want to parse – after we have parsed the other Packages
files already. With .dsc/.deb files we could add them before we started
parsing anything.
With a bit of care we can avoid generating too much data we have to
throw away again (as many parts assume that e.g. the count of packages
doesn't change midair), so that on a speed front there shouldn't be
much of a difference, but output can be slightly confusing as if we have
a completely valid cache on disk the "Reading package lists... Done" is
printed two times – but apt is pretty quick about it in that case.
Closes: #137560, #444930, #489911, #583914, #728317, #812173
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Closes: #734922
|
|
Gbp-Dch: ignore
|
|
Fix reproducibility issue due to readdir() order by sorting
the list of sources to be built and linked.
[jak@debian.org: Added summary and fixed typo]
Closes: #810509
|
|
If a package has no description, we would crash in search. While
this should not happen, there seem to be some weird cases where
it does.
A safer way might be to make the whole parser thing safe
against this, so pkgRecords::Lookup(Desc.FileList()) works
and returns a parser where all values are empty. This would
also fix all other instances of this bug, if there are any.
Closes: #810622
|
|
This allows passing compressing the output. The compressor must
be a compressor name, extension, or an extension without the
leading dot.
|
|
This option controls if downloaded packages should be kept after
a successful install or if they should be deleted. The default
for "apt-get" is that they are kept (just like before).
However the default for "apt" is that they get deleted.
Closes: #160743
|
|
Git-Dch: Ignore
|
|
We try to acquired the locks, but we didn't stop if we failed to get it…
Closes: 808561
|
|
Trying to clean up directories which do not exist seems rather silly if
you think about it, so let apt think about it and stop it.
Depends a bit on the caller if this is fixing anything for them as they
might try to acquire a lock or doing other clever things as apt does.
Closes: 807477
|
|
Otherwise a user is subject to unexpected content-injection depending on
which directory she happens to start apt in. This also cleans up the code
requiring less implementation details in build-dep which is always good.
Technically, this is an ABI break as we override virtual methods, but
that they weren't overridden was a mistake resulting in pure classes,
which shouldn't be pure, so they were unusable – and as they are new in
1.1 nobody is using them yet (and hopefully ever as they are borderline
implementation details).
Closes: 806693
|
|
There is no need to check configured build-essentials for each package,
doing it once at the start ought to be enough.
Git-Dch: Ignore
|
|
Lets do this non-behaviour change before we modify the source for real
as the reflow and moving would otherwise hide all the interesting changes.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
The relevant testcases are in test/integration/test-apt-get-source.
There is a test for #731853 that is supposed to "ensure that apt will
pick the higher version number" of 0.0.1 (stable) and 0.1 (stable).
However, this works by pure chance, as simply reversing the order
of the two insertsource lines makes the test fail.
So #731853 isn't really fixed, yet.
Actually, that's related to the problem I reported, as the underlying
issue for both is the same:
In the FindSrc function apt chooses a new 'best hit', if either
* there is a target release and it matches the release of the package,
* or the version of the package is higher than the last best hit.
Consider having 1.0 (stable), 2.0 (unstable) and 1.5 (unstable),
in this order.
Looking for the version in stable, apt first selects 1.0, because the
release matches the target release, but then subsequently selects 2.0,
because the version is higher.
Looking for the version in unstable, apt first selects 2.0, because the
release matches the target release, but then subsequently selects 1.5,
because the release also matches the target release.
The correct way would be to choose a new 'best hit', if either
* there is a target release and it matches the release of the package,
* or there is no target release
and the version is higher than the last best hit.
Closes: 746412
Mail-Reference: <565A604B.7090104@googlemail.com>
Mail-Archive: https://lists.debian.org/debian-devel/2015/11/msg00470.html
|
|
Passing function pointers around while working on this was very icky,
but if weak symbols are too much to ask for…
Reverts "do not use "-Wl,-Bsymbolic-functions" during the build to avoid
breakage" aka a5fc9be36211a290a7abc3ca2a8bf98943bc1f57.
|
|
This reverts commit 7ac9386cb6e272625490fcf3e8183b45e28bbc43.
|
|
This reverts commit 28f24d3dad1844af316337d565ba2ebc11c8ce97.
This fails on Ubuntu as they build with -Bsymbolic-functions.
|
|
Closes: #806422
|
|
We do not show the architecture as a dedicated field as this is rather
technical information, but as packagename it makes sense to show the
architecture as other part of apt will refer to it in this way.
|
