| Age | Commit message (Collapse) | Author |
|---|
|
|
|
On FreeBSD, readlink -f requires the last component
to exist.
|
|
Several modules use std::array without including the
array header. Bad modules.
Some modules use STDOUT_FILENO and friends, or close()
without including unistd.h, where they are defined.
One module also uses WIFEXITED() without including
sys/wait.h.
Finally, environ is not specified to be defined in unistd.h. We
are required to define it ourselves according to POSIX, so let's
do that.
|
|
In 105503b4b470c124bc0c271bd8a50e25ecbe9133 we got a warning implemented
for unreadable files which greatly improves the behavior of apt update
already as everything will work as long as we don't need the keys
included in these files. The behavior if they are needed is still
strange through as update will fail claiming missing keys and a manual
test (which the user will likely perform as root) will be successful.
Passing the new warning generated by apt-key through to apt is a bit
strange from an interface point of view, but basically duplicating the
warning code in multiple places doesn't feel right either. That means we
have no translation for the message through as apt-key has no i18n yet.
It also means that if the user has a bunch of sources each of them will
generate a warning for each unreadable file which could result in quite
a few duplicated warnings, but "too many" is better than none.
Closes: 834973
|
|
apt-key has inconsistent behaviour if it can't read a keyring file:
Commands like 'list' skipped silently over such keyrings while 'verify'
failed hard resulting in apt to report cconfusing gpg errors (#834973).
As a first step we teach apt-key to be more consistent here skipping in
all commands over unreadable keyrings, but issuing a warning in the
process, which is as usual for apt commands displayed at the end of the
run.
|
|
Fingerprints tend to be displayed in space-separated octet pairs so be
nice and allow delete to remove a key based on such a string rather than
requiring that the user is deleting all the spaces manually.
|
|
We need to support partial upgrades anyhow, so we have to deal with the
different versions and your tests try to ensure that we do, so we
shouldn't make any explicit higher requirements.
|
|
Bye, bye, old friend.
|
|
Introduce an initial CMake buildsystem. This build system can build
a fully working apt system without translation or documentation.
The FindBerkelyDB module is from kdelibs, with some small adjustements
to also look in db5 directories.
Initial work on this CMake build system started in 2009, and was
resumed in August 2016.
|
|
gpgconf wasn't always equipped with a --kill option as highlighted by
our testcases failing on Travis and co as these use a much older version
of gpg2. As this is just for cleaning up slightly faster we ignore any
error a call might produce and carry on. Use a recent enough gpg2
version if you need the immediate killing…
Gbp-Dch: Ignore
Reported-By: Travis CI
|
|
apt-key has (usually) no secret key material so it doesn't really need
the agent at all, but newer gpgs insist on starting it anyhow. The
agents die off rather quickly after the underlying home-directory is
cleaned up, but that is still not fast enough for tools like sbuild
which want to unmount but can't as the agent is still hanging onto a
non-existent homedir.
Reported-By: Johannes 'josch' Schauer on IRC
|
|
The generated dump output is incorrect in sofar as it uses the name as
the key for this compressor, but they don't need to be equal as is the
case if you force some of the inbuilt ones to be disabled as our testing
framework does it at times.
This is hidden from changelog as nobody will actually notice while
describing it in a few words make it sound like an important change…
Git-Dch: Ignore
|
|
This caused a crash because the cache was a nullptr.
Closes: #829651
|
|
All apt versions support numeric as well as 3-character timezones just
fine and its actually hard to write code which doesn't "accidently"
accepts it. So why change? Documenting the Date/Valid-Until fields in
the Release file is easy to do in terms of referencing the
datetime format used e.g. in the Debian changelogs (policy §4.4). This
format specifies only the numeric timezones through, not the nowadays
obsolete 3-character ones, so in the interest of least surprise we should
use the same format even through it carries a small risk of regression
in other clients (which encounter repositories created with
apt-ftparchive).
In case it is really regressing in practice, the hidden option
-o APT::FTPArchive::Release::NumericTimezone=0
can be used to go back to good old UTC as timezone.
The EDSP and EIPP protocols use this 'new' format, the text interface
used to communicate with the acquire methods does not for compatibility
reasons even if none of our methods would be effected and I doubt any
other would (in these instances the timezone is 'GMT' as that is what
HTTP/1.1 requires). Note that this is only true for apt talking to
methods, (libapt-based) methods talking to apt will respond with the
'new' format. It is therefore strongly adviced to support both also in
method input.
|
|
Debian isn't using 'update' anymore for years and the command is in
direct conflict with our goal of not requiring gnupg anymore, so it
is high time to officially declare this command as deprecated.
|
|
apt-key needs gnupg for most of its operations, but depending on it
isn't very efficient as apt-key is hardly used by users – and scripts
shouldn't use it to begin with as it is just a silly wrapper. To draw
more attention on the fact that e.g. 'apt-key add' should not be used in
favor of "just" dropping a keyring file into the trusted.gpg.d
directory this commit implements the display of warnings.
|
|
There is no real point in having two commands which roughly do the same
thing, especially if the difference is just in the display of the
fingerprint and hence security sensitive information.
Closes: 829232
|
|
Julian noticed on IRC that I fall victim to a lovely false friend by
calling referring to a 'planer' all the time even through these are
machines to e.g. remove splinters from woodwork ("make stuff plane").
The term I meant is written in german in this way (= with a single n)
but in english there are two, aka: 'planner'.
As that is unreleased code switching all instances without any
transitional provisions. Also the reason why its skipped in changelog.
Thanks: Julian Andres Klode
Gbp-Dch: Ignore
|
|
Freeing 'Install' for future use as an interface for "dpkg --install",
which is currently not used by any existent planer, so the
implementation of it itself will be delayed until then.
|
|
A rather special need option, but the internal planer supports this and
we have a testcase for it & sometimes it is hit (as a bug through). The
option itself mostly serves as a reminder for implementors that they
should be careful with removes and especially temporary removes if they
perform any.
|
|
Git-Dch: Ignore
|
|
APT has 3 modes: no immediate configuration, all packages are configured
immediately and its default mode of configuring essentials and
pseudo-essentials immediately only. While this seems like a job of
different planers at first, it might be handy to have it as an option,
too, in case a planer (like apts internal one) supports different modes
where the introduction of individual planers would be counter intuitive.
|
|
Testing the current implementation can benefit from being able to be
feed an EIPP request and produce a fully compliant response. It is also
a great test for EIPP in general.
|
|
There is a subtile difference between an empty setting and "DIRECT" in
the configuration as the later overrides the generic settings while the
earlier does not. Also, non-zero exitcodes should really be reported as
an error rather than silently discarded.
|
|
|
|
Most (if not all) solvers should be able to run perfectly fine without
root privileges as they get the entire state they are supposed to work
on via stdin and do not perform any action directly, but just pass
suggestions on via stdout.
The new default is to run them all as _apt hence, but each solver can
configure another user if it chooses/must. The security benefits are
minimal at best, but it helps preventing silly mistakes (see
35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good.
Note that our 'apt' and 'dump' solver already dropped privileges if they
had them.
|
|
For bugreports and co it could be handy to have the scenario and all the
settings used in it around later for inspection for EDSP like protocols.
EDSP might not be the most interesting as the user can still interrupt
the process before the solution is applied and users tend to have an
opinion on the "rightness" of a solution, so it is disabled by default.
|
|
EDSP had a WriteSolution method to write out the entire solution based
on the inspection of a given pkgDepCache, but that is rather inflexible
both for EDSP itself and for other EDSP like-protocols. It seems better
to use a smaller scope in printing just a single stanza based on a given
version as there is more reuse potential.
|
|
First seen on hurd, but easily reproducible on all systems by removing
the 'execution' bit from the current working directory and watching some
tests (mostly the no-output expecting tests) fail due to find printing:
"find: Failed to restore initial working directory: …"
Samuel Thibault says in the bugreport:
| To do its work, find first records the $PWD, then goes to
| /etc/apt/trusted.gpg.d/ to find the files, and then goes back to $PWD.
|
| On Linux, getting $PWD from the 700 directory happens to work by luck
| (POSIX says that getcwd can return [EACCES]: Search permission was denied
| for the current directory, or read or search permission was denied for a
| directory above the current directory in the file hierarchy). And going
| back to $PWD fails, and thus find returns 1, but at least it emitted its
| output.
|
| On Hurd, getting $PWD from the 700 directory fails, and find thus aborts
| immediately, without emitting any output, and thus no keyring is found.
|
| So, to summarize, the issue is that since apt-get update runs find as a
| non-root user, running it from a 700 directory breaks find.
Solved as suggested by changing to '/' before running find, with some
paranoia extra care taking to ensure the paths we give to find are really
absolute paths first (they really should, but TMPDIR=. or a similar
Dir::Etc::trustedparts setting could exist somewhere in the wild).
The commit takes also the opportunity to make these lines slightly less
error ignoring and the two find calls using (mostly) the same parameters.
Thanks: Samuel Thibault for 'finding' the culprit!
Closes: 826043
|
|
Broken in e7e10e47476606e3b2274cf66b1e8ea74b236757 by looking always
into "apt" while we ship some tools in "apt-utils"…
|
|
Setting the C++ locale via std::locale::global(std::locale("")); which
would otherwise default to the default C locale (aka: unaffected by
setlocale) effects the formatting of numeric types in IO streams, which
for output for humans is perfectly sensible, but breaks our many text
interfaces used and parsed by us and others without expecting the
numbers to be formatted.
Closes: #825396
|
|
Its more space and runtime efficient to use a boolean set instead of a
CacheSet-based implementation.
Git-Dch: Ignore
|
|
This allows to differentiate properly between 'apt-get upgrade', 'apt
upgrade' and 'apt full-upgrade'.
|
|
|
|
I doubt there is any non-src:apt usage of these interfaces.
|
|
The report mentions "apt list --upgradable", but there are others which
have inconsistent behavior ranging from segfaulting to doing something
with the partial (and hence incomplete) data. We had a recent report
about sources.list (#818628), this one mentions prefences, the obvious
next step is conf files… so the testcase is adapted to check for all
three in file and directory versions and run a bunch of commands each
time which should all have more or less the same behavior in such a case
(aka error out).
Closes: 824503
|
|
Guarding against 'broken' greps not dealing with non-text inputs
"just in case" by making the input text with a proper newline.
[commit message by David Kalnischkies]
Reported-On: IRC
Git-Dch: Ignore
|
|
We want to stop hard-depending on gnupg and for this it is essential
that apt-key isn't used in any critical execution path, which
maintainerscript are. Especially as it is likely that these script call
apt-key either only for (potentially now outdated cleanup) or still not
use the much simpler trusted.gpg.d infrastructure.
|
|
Fixed in f7bd44bae0d7cb7f9838490b5eece075da83899e already, but the
commit misses the Closes tag and while we are at it we can add a simple
regression test and micro-optimize it a bit.
Thanks: James McCoy for the suggestion.
Closes: 816691
|
|
|
|
This way it works more similar to the compressor binaries, which we
can relief in this way from their job in the test framework avoiding the
need of adding e.g. liblz4-tool to the test dependencies.
|
|
Downloading and storing are two different operations were different
compression types can be preferred. For downloading we provide the
choice via Acquire::CompressionTypes::Order as there is a choice to
be made between download size and speed – and limited by whats available
in the repository.
Storage on the other hand has all compressions currently supported by
apt available and to reduce runtime of tools accessing these files the
compression type should be a low-cost format in terms of decompression.
apt traditionally stores its indexes uncompressed on disk, but has
options to keep them compressed. Now that apt downloads additional files
we also deal with files which simply can't be stored uncompressed as
they are just too big (like Contents for apt-file). Traditionally they
are downloaded in a low-cost format (gz) as repositories do not provide
other formats, but there might be even lower-cost formats and for
download we could introduce higher-cost in the repositories.
Downloading an entire index potentially requires recompression to
another format, so an update takes potentially longer – but big files
are usually updated via pdiffs which has to de- and re-compress anyhow
and does it on the fly anyhow, so there is no extra time needed and in
general it seems to be benefitial to invest the time in update to save
time later on file access.
|
|
This allows passing compressing the output. The compressor must
be a compressor name, extension, or an extension without the
leading dot.
|
|
Gbp-Dch: ignore
|
|
It does not make sense to consider empty buckets in the
average, as they do not affect the lookup performance.
|
|
There's no point in keeping using yet another read-then-write
loop.
Gbp-Dch: ignore
|
|
Gbp-Dch: ignore
|
|
This can automatically handle compressed files and is useful
for stuff like apt-file.
|
|
The presents (even of an empty) secring.gpg is indication enough for
gpg2 to tigger the migration code which not only produces a bunch of
output on each apt-key call, but also takes a while to complete as an
agent needs to be started and all that.
We workaround the first part by forcing the migration to happen always
in a call we forced into silence, but that leaves us with an agent to
start all the time – with a bit of reordering we can make it so that we
do not explicitly create the secring, but let gpg create it if needed,
which prevents the migration from being triggered and we have at least a
bit less of a need for an agent. Changes - even to public only keyrings
- still require one, but such actions are infrequent in comparison to
verification calls, so that should be a net improvement.
|
|
apt-key creates internally a script (since ~1.1) which it will call to
avoid dealing with an array of different options in the code itself, but
while writing this script it wraps the values in "", which will cause
the shell to evaluate its content upon execution.
To make 'use' of this either set a absolute gpg command or TMPDIR to
something as interesting as:
"/tmp/This is fü\$\$ing cràzy, \$(man man | head -n1 | cut -d' ' -f1)\$!"
If such paths can be encountered in reality is a different question…
|
