| Age | Commit message (Collapse) | Author |
|---|
|
No user-visible change as it effects mostly code comments and
not a single error message, manpage or similar.
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
We want to kill everything using our temporary directory.
LP: #1773992
|
|
|
|
Prompted-by: Jakub Wilk <jwilk@debian.org>
|
|
Reported-By: codespell & spellintian
Gbp-Dch: Ignore
|
|
|
|
The casts are useless, but the reports show some where we can actually
improve the code by replacing them with better alternatives like
converting whatever int type into a string instead of casting to a
specific one which might in the future be too small.
Reported-By: gcc -Wuseless-cast
|
|
Reported-By: gcc -Wunused-parameter
Gbp-Dch: Ignore
|
|
gpg2 generates keyboxes by default and users end up putting either those
or armored files into the trusted.gpg.d directory which apt tools
neither expect nor can really work with without fortifying backward
compatibility (at least under the ".gpg" extension).
A (short) discussion about how to deal with keyboxes happened in
https://lists.debian.org/deity/2017/07/msg00083.html
As the last message in that thread is this changeset lets go ahead
with it and see how it turns out.
The idea is here simply that we check the first octal of a gpg file to
have one of three accepted values. Testing on my machines has always
produced just one of these, but running into those values on invalid
files is reasonabily unlikely to not worry too much.
Closes: #876508
|
|
We now wait for being online ourselves, so all we need to wait
on is for services we are using to be online first. This avoids
severe boot slowdowns by other services having specified an
After=network-online.target without a Wants=.
Gbp-Dch: Full
|
|
|
|
Introduce a new helper, apt-helper wait-online that uses
NetworkManager and/or systemd-networkd to wait for them
reporting online, with a time out of 30 seconds; and run
that helper before running the daily update script.
LP: #1699850
Gbp-Dch: Full
|
|
As a follow up to the last commit, let's replace APT_CONST
with APT_PURE everywhere to clean stuff up.
|
|
Our test-external-dependency-solver-protocol test sometimes fails on the
immediately 'crashing' solver exit1withoutmsg with the message that it
got SIGPIPE from the solver. That isn't really possible as the solver
produces no output, but on inspection its not this solver getting the
signal but the wrapping provided by the dump-solver as the wrapped
solver instantly exits. Simply ignoring the signal helps in perhaps
extracting the last words of another solver (as this one has none), but
at the very least we get the exit code of the wrapped solver we
interested in as output.
|
|
This makes it easier to see which headers includes what.
The changes were done by running
git grep -l '#\s*include' \
| grep -E '.(cc|h)$' \
| xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/'
To modify all include lines by adding a space, and then running
./git-clang-format.sh.
|
|
Including cacheiterators.h before pkgcache.h fails because
pkgcache.h depends on cacheiterators.h.
|
|
Changes nothing on the program front and as the datatypes are
sufficently comparable fixes no bug either, but problems later on if we
ever change the types of those and prevent us using types which are too
large for the values we want to store waste (a tiny bit of) resources.
Gbp-Dch: Ignore
|
|
On Travis and co the default gpg implementation is gpg1 which for some
reason fails if a secret key which was already imported is imported
again. We would prefer it to be a NOP like gpg2 handles it so we crudely
check the error message. apt-key usually doesn't deal with secret keys –
it only learned to do it for manual testing and the integration
framework usage, so no public interface is effected.
Triggered-By: 4ce2f35248123ff2366c8c365ad6a94945578d66
Gbp-Dch: Ignore
|
|
Importing a new secret key into gpg(2) can be increadibly slow which
prolongs the test runs significantly – by caching the homedir we gain a
significant speedbonus as reimporting already present keys seems like a
far less costly operation.
Git-Dch: Ignore
|
|
Having binary files in /etc is kinda annoying – not that the armored
files are much better – but it is hard to keep tabs on which format the
file has ("simple" or "keybox") and different gnupg versions have
different default binary formats which can be confusing for users to
work with (beside that it is binary).
Adding support for this now will enable us in some distant future to
move to armored later on, much like we added trusted.gpg.d years before
the world picked it up.
|
|
We report warnings from apt-key this way already since
29c590951f812d9e9c4f17706e34f2c3315fb1f6, so reporting errors seems like
a good addition. Most of those errors aren't really from apt-key
through, but from the code setting up and actually calling it which used
to just print to stderr which might or might not intermix them with
(other) progress lines in update calls. Having them as proper error
messages in the system means that the errors are actually collected
later on for the list instead of ending up with our relatively generic
but in those cases bogus hint regarding "is gpgv installed?".
The effective difference is minimal as the errors apply mostly to
systems which have far worse problems than a not as nice looking error
message, which makes this pretty hard to test – but at least now the
hint that your system is broken can be read in proper order (= there
aren't many valid cases in which the permissions of /tmp are messed up…).
LP: #1522988
|
|
|
|
On FreeBSD, readlink -f requires the last component
to exist.
|
|
Several modules use std::array without including the
array header. Bad modules.
Some modules use STDOUT_FILENO and friends, or close()
without including unistd.h, where they are defined.
One module also uses WIFEXITED() without including
sys/wait.h.
Finally, environ is not specified to be defined in unistd.h. We
are required to define it ourselves according to POSIX, so let's
do that.
|
|
In 105503b4b470c124bc0c271bd8a50e25ecbe9133 we got a warning implemented
for unreadable files which greatly improves the behavior of apt update
already as everything will work as long as we don't need the keys
included in these files. The behavior if they are needed is still
strange through as update will fail claiming missing keys and a manual
test (which the user will likely perform as root) will be successful.
Passing the new warning generated by apt-key through to apt is a bit
strange from an interface point of view, but basically duplicating the
warning code in multiple places doesn't feel right either. That means we
have no translation for the message through as apt-key has no i18n yet.
It also means that if the user has a bunch of sources each of them will
generate a warning for each unreadable file which could result in quite
a few duplicated warnings, but "too many" is better than none.
Closes: 834973
|
|
apt-key has inconsistent behaviour if it can't read a keyring file:
Commands like 'list' skipped silently over such keyrings while 'verify'
failed hard resulting in apt to report cconfusing gpg errors (#834973).
As a first step we teach apt-key to be more consistent here skipping in
all commands over unreadable keyrings, but issuing a warning in the
process, which is as usual for apt commands displayed at the end of the
run.
|
|
Fingerprints tend to be displayed in space-separated octet pairs so be
nice and allow delete to remove a key based on such a string rather than
requiring that the user is deleting all the spaces manually.
|
|
We need to support partial upgrades anyhow, so we have to deal with the
different versions and your tests try to ensure that we do, so we
shouldn't make any explicit higher requirements.
|
|
Bye, bye, old friend.
|
|
Introduce an initial CMake buildsystem. This build system can build
a fully working apt system without translation or documentation.
The FindBerkelyDB module is from kdelibs, with some small adjustements
to also look in db5 directories.
Initial work on this CMake build system started in 2009, and was
resumed in August 2016.
|
|
gpgconf wasn't always equipped with a --kill option as highlighted by
our testcases failing on Travis and co as these use a much older version
of gpg2. As this is just for cleaning up slightly faster we ignore any
error a call might produce and carry on. Use a recent enough gpg2
version if you need the immediate killing…
Gbp-Dch: Ignore
Reported-By: Travis CI
|
|
apt-key has (usually) no secret key material so it doesn't really need
the agent at all, but newer gpgs insist on starting it anyhow. The
agents die off rather quickly after the underlying home-directory is
cleaned up, but that is still not fast enough for tools like sbuild
which want to unmount but can't as the agent is still hanging onto a
non-existent homedir.
Reported-By: Johannes 'josch' Schauer on IRC
|
|
The generated dump output is incorrect in sofar as it uses the name as
the key for this compressor, but they don't need to be equal as is the
case if you force some of the inbuilt ones to be disabled as our testing
framework does it at times.
This is hidden from changelog as nobody will actually notice while
describing it in a few words make it sound like an important change…
Git-Dch: Ignore
|
|
This caused a crash because the cache was a nullptr.
Closes: #829651
|
|
All apt versions support numeric as well as 3-character timezones just
fine and its actually hard to write code which doesn't "accidently"
accepts it. So why change? Documenting the Date/Valid-Until fields in
the Release file is easy to do in terms of referencing the
datetime format used e.g. in the Debian changelogs (policy §4.4). This
format specifies only the numeric timezones through, not the nowadays
obsolete 3-character ones, so in the interest of least surprise we should
use the same format even through it carries a small risk of regression
in other clients (which encounter repositories created with
apt-ftparchive).
In case it is really regressing in practice, the hidden option
-o APT::FTPArchive::Release::NumericTimezone=0
can be used to go back to good old UTC as timezone.
The EDSP and EIPP protocols use this 'new' format, the text interface
used to communicate with the acquire methods does not for compatibility
reasons even if none of our methods would be effected and I doubt any
other would (in these instances the timezone is 'GMT' as that is what
HTTP/1.1 requires). Note that this is only true for apt talking to
methods, (libapt-based) methods talking to apt will respond with the
'new' format. It is therefore strongly adviced to support both also in
method input.
|
|
Debian isn't using 'update' anymore for years and the command is in
direct conflict with our goal of not requiring gnupg anymore, so it
is high time to officially declare this command as deprecated.
|
|
apt-key needs gnupg for most of its operations, but depending on it
isn't very efficient as apt-key is hardly used by users – and scripts
shouldn't use it to begin with as it is just a silly wrapper. To draw
more attention on the fact that e.g. 'apt-key add' should not be used in
favor of "just" dropping a keyring file into the trusted.gpg.d
directory this commit implements the display of warnings.
|
|
There is no real point in having two commands which roughly do the same
thing, especially if the difference is just in the display of the
fingerprint and hence security sensitive information.
Closes: 829232
|
|
Julian noticed on IRC that I fall victim to a lovely false friend by
calling referring to a 'planer' all the time even through these are
machines to e.g. remove splinters from woodwork ("make stuff plane").
The term I meant is written in german in this way (= with a single n)
but in english there are two, aka: 'planner'.
As that is unreleased code switching all instances without any
transitional provisions. Also the reason why its skipped in changelog.
Thanks: Julian Andres Klode
Gbp-Dch: Ignore
|
|
Freeing 'Install' for future use as an interface for "dpkg --install",
which is currently not used by any existent planer, so the
implementation of it itself will be delayed until then.
|
|
A rather special need option, but the internal planer supports this and
we have a testcase for it & sometimes it is hit (as a bug through). The
option itself mostly serves as a reminder for implementors that they
should be careful with removes and especially temporary removes if they
perform any.
|
|
Git-Dch: Ignore
|
|
APT has 3 modes: no immediate configuration, all packages are configured
immediately and its default mode of configuring essentials and
pseudo-essentials immediately only. While this seems like a job of
different planers at first, it might be handy to have it as an option,
too, in case a planer (like apts internal one) supports different modes
where the introduction of individual planers would be counter intuitive.
|
|
Testing the current implementation can benefit from being able to be
feed an EIPP request and produce a fully compliant response. It is also
a great test for EIPP in general.
|
|
There is a subtile difference between an empty setting and "DIRECT" in
the configuration as the later overrides the generic settings while the
earlier does not. Also, non-zero exitcodes should really be reported as
an error rather than silently discarded.
|
|
|
|
Most (if not all) solvers should be able to run perfectly fine without
root privileges as they get the entire state they are supposed to work
on via stdin and do not perform any action directly, but just pass
suggestions on via stdout.
The new default is to run them all as _apt hence, but each solver can
configure another user if it chooses/must. The security benefits are
minimal at best, but it helps preventing silly mistakes (see
35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good.
Note that our 'apt' and 'dump' solver already dropped privileges if they
had them.
|
|
For bugreports and co it could be handy to have the scenario and all the
settings used in it around later for inspection for EDSP like protocols.
EDSP might not be the most interesting as the user can still interrupt
the process before the solution is applied and users tend to have an
opinion on the "rightness" of a solution, so it is disabled by default.
|
|
EDSP had a WriteSolution method to write out the entire solution based
on the inspection of a given pkgDepCache, but that is rather inflexible
both for EDSP itself and for other EDSP like-protocols. It seems better
to use a smaller scope in printing just a single stanza based on a given
version as there is more reuse potential.
|
|
First seen on hurd, but easily reproducible on all systems by removing
the 'execution' bit from the current working directory and watching some
tests (mostly the no-output expecting tests) fail due to find printing:
"find: Failed to restore initial working directory: …"
Samuel Thibault says in the bugreport:
| To do its work, find first records the $PWD, then goes to
| /etc/apt/trusted.gpg.d/ to find the files, and then goes back to $PWD.
|
| On Linux, getting $PWD from the 700 directory happens to work by luck
| (POSIX says that getcwd can return [EACCES]: Search permission was denied
| for the current directory, or read or search permission was denied for a
| directory above the current directory in the file hierarchy). And going
| back to $PWD fails, and thus find returns 1, but at least it emitted its
| output.
|
| On Hurd, getting $PWD from the 700 directory fails, and find thus aborts
| immediately, without emitting any output, and thus no keyring is found.
|
| So, to summarize, the issue is that since apt-get update runs find as a
| non-root user, running it from a 700 directory breaks find.
Solved as suggested by changing to '/' before running find, with some
paranoia extra care taking to ensure the paths we give to find are really
absolute paths first (they really should, but TMPDIR=. or a similar
Dir::Etc::trustedparts setting could exist somewhere in the wild).
The commit takes also the opportunity to make these lines slightly less
error ignoring and the two find calls using (mostly) the same parameters.
Thanks: Samuel Thibault for 'finding' the culprit!
Closes: 826043
|
