summaryrefslogtreecommitdiff
path: root/debian/control
AgeCommit message (Collapse)Author
2017-08-24Rebase ubuntu masterJulian Andres Klode
2017-08-17Handle GCC 7 std::string operator ABI breakJulian Andres Klode
We now require gcc 7 on the packaging side, and add an appropriate symbol to our symbols file. Also adjust prepare-release to ignore g++ version requirements when setting up build dependencies on CI. Closes: #871275
2017-07-26remove reference to a-t-debtorrent in descriptionDavid Kalnischkies
debtorrent and its helper apt-transport-debtorrent were removed from Debian in 2013 based on the bugreports #730459 and #731281. As they aren't available, we shouldn't make references to them anymore. a-t-tor is picked as replacement for the example.
2017-06-30Switch to 'http' as the default https methodJulian Andres Klode
The old curl based method is still available as 'curl', 'curl+http', and 'curl+https'.
2017-06-29Build-Depend on debhelper (>= 10) to shut up lintianJulian Andres Klode
2017-06-29Bump Standards-Version (and wrap-and-sort a bit)Julian Andres Klode
2017-06-29Demote gnupg to SuggestsJulian Andres Klode
stretch was the migration release for gpg->gpgv basically, so let's demote it now.
2017-06-29Have apt Recommend ca-certificatesJulian Andres Klode
The http method needs ca-certificates for TLS support, so enable it.
2017-06-28methods: Add HTTPS support to http method, using GnuTLSJulian Andres Klode
The http method will eventually replace the curl-based https method, but for now, this is an opt-in experiment that can be enabled by setting Dir::Bin::Methods::https to "http". Known issues: - We do not support HTTPS proxies yet - We do not support proxying HTTPS connections yet (CONNECT) - IssuerCert and SslForceVersion are unsupported Gbp-Dch: Full
2016-11-25follow the googletest merge in build-dependsDavid Kalnischkies
2016-09-01re-add apt breaks/replaces apt-utils (<< 1.3~exp2~)David Kalnischkies
The recently added (increased actually) Breaks were accidently dropped while our set of mostly old and outdated breaks was cleaned up. Regression-From: 20d2f4a4f164cd9026dad698e471c95d7c28973b Previously-Add-In: ab07af708e49c9219940ffd3e20a01c763267e03 Closes: #836220
2016-08-19debian: Run wrap-and-sortJulian Andres Klode
Manually clean up the apt.maintscript, it moved stuff from before the comment to after the comment...
2016-08-19debian: Drop outdated stuffJulian Andres Klode
The README.source is not usable anymore, and the Build-Conflicts andd Breaks/Replaces are not needed anymore.
2016-08-19debian: Switch to debhelper 10Julian Andres Klode
debhelper 10 is much nicer with the installation part from a dirty tree, so you can just fix some stuff breaking the install step and then continue building with debuild -b -nc until you have fixed all your stuff. It also has some other advantages, of course, like some bug fixes in shell escaping for maintscript, or systemd helper changes.
2016-08-17add the gpg-classic variant to the gpgv/gnupg or-groupDavid Kalnischkies
We need to support partial upgrades anyhow, so we have to deal with the different versions and your tests try to ensure that we do, so we shouldn't make any explicit higher requirements.
2016-08-13Change anonscm.d.o links to /git/apt/apt.git and httpsJulian Andres Klode
This also fixes Debian/apt#20, but is slightly more complete. I think /git also looks better than /cgit, so let's switch the Vcs entry in control over too.
2016-08-10CMake: Bump minimum required version to 3.4.0Julian Andres Klode
The SOURCE_DIR property is used for the translation building and was introduced in cmake 3.4
2016-08-06Build-depend on pkg-configJulian Andres Klode
2016-08-06CMake: debian: Switch packaging over to CMake and dh 9Julian Andres Klode
This new packaging is much easier to read, although the duplication in the install files is a bit annoying. We should probably also get rid of the movefiles for solvers, planners, and https method; but then we have to keep track of which methods exist in the apt package. Another disadvantage is that building only the documentation packages also requires building the code, as there's no way to turn off code building in the project.
2016-08-06debian/control: Use versioned provides for same-ver library depsJulian Andres Klode
This simplifies the design a bit, as we do not need to read the major ABI version number from some file / command. Gbp-Dch: ignore
2016-06-27add myself to UploadersDavid Kalnischkies
2016-06-27Add a apt suggests powermgmt-baseNicolas Le Cam
debian/apt.apt-compat.cron.daily is using on_ac_power utility
2016-06-08move 'dump' solver from apt-utils to apt packageDavid Kalnischkies
2016-05-24use https instead of git for Vcs-GitDavid Kalnischkies
Reported-By: lintian: vcs-field-uses-insecure-uri Git-Dch: Ignore
2016-05-24no-change bump of Standards-Version to 3.9.8David Kalnischkies
We don't have no menu file.
2016-05-01move gnupg|gnupg2 from apt Depends to RecommendsDavid Kalnischkies
apt doesn't need gnupg in its main execution paths to function, especially the Release file verification is done with gpgv only. It is only used by apt-key for advanced key management functionality most user will never use nor need. The intend is to demote it eventually to Suggests, but we opt here for a staged downgrade as there are still third-party repositories out there which require apt-key functionality without depending on gnupg (or apt for that matter).
2016-04-01Use systemd.timer instead of a cron jobMichael Vogt
The rational is that we need to spread the load on the mirrors that apt update and unattended-upgrades cause. To do so, we leverage the RandomizeDelay feature of systemd. The other advantage is that the timer is not run at a fixed daily.daily time but instead every 24h. This also fixes the problem that the randomized deplay in the current apt.cron.daily causes other cron jobs to be deplayed. A compatibility cron job is also provided for systems that do not use systemd. Note that the time is fired two times a day, but the logic inside of apt.systemd.daily will ensure (via stamp files) that the servers are hit at most every 24h. Firing two times a day helps with the worst case update time and it also helps with systems that are not always on. LP: #246381, #727685 Closes: #600262, #709675, #663290
2016-03-06debian/control: Set Standards-Version to 3.9.7Julian Andres Klode
We do not follow the recommendation with regards to placement of documentation in apt-doc, as we install in apt-doc, but it's only a recommendation and I don't want think we should move them.
2016-02-03Drop the g++ build-dep, transition is doneJulian Andres Klode
It's not cross-satisfiable. Reported-by: Helmut Grohne
2016-01-09Version the build-depends on liblz4-dev to >= 0.0~r126Julian Andres Klode
We need r126 of lz4, as this introduces the lz4frame.h header.
2016-01-09Bump dpkg-dev and debhelper build-dep to make lintian happyJulian Andres Klode
This is not really needed anymore, as those are in stable, but as they are versioned already, let's just do it. Gbp-Dch: ignore
2016-01-09Do not break apt-file (<< 3.0~exp1~), 2.X works fineJulian Andres Klode
There's no point in breaking all older apt-file versions just because one old experimental upload was broken.
2016-01-08Break apt-file (<< 3.0~exp1~)Julian Andres Klode
Gbp-Dch: ignore
2016-01-08libapt-pkg5.0: Add Breaks appstream (<< 0.9.0-3~)Julian Andres Klode
This ensures that a compatible version of appstream is installed, that is, one that disables lz4 compression for its data.
2016-01-07FileFd: (native) LZ4 supportJulian Andres Klode
Implement native support for LZ4 compression, using the official lz4 library.
2016-01-03Allow building without libgtest-dev under <nocheck> build profileHelmut Grohne
I'd like to avoid pulling libgtest-dev into the bootstrap set. Fortunately, libgtest-dev is only used for testing apt and apt correctly implements DEB_BUILD_OPTIONS=nocheck now. So this bug is about getting rid of the Build-Depends. Simply removing it (by adding a build profile) is not sufficient however as configure fails hard, so an additional bit is necessary to cover for that. Closes: #809726
2016-01-02Add bash-completion support for the "apt" commandMichael Vogt
The apt bash-completion support was submited to the bash-completion package as a patch in May 2014. It is still not included to this date and because it is an important feature for many users it is now part of apt until the bash-completion package is mantained more actively again. Note that the "Relaces" line is only required for Ubuntu it will have no effect on Debian. Closes: #747094
2015-12-01add a apt breaks (apt-utils << 1.1.3) for partial-upgradesDavid Kalnischkies
You could think a0bf789783ea283914d059aea0f4d0f77d6bbaaf would be enough, but it turns out its only half of the puzzle. Closes: 806765 Suggested-By: Julian Andres Klode <jak@debian.org>
2015-11-29add apt-utils Depends apt (= ${binary:Version})David Kalnischkies
As we ship some tools in apt-utils which depend on our private library we have to ensure that apt-utils depends on a proper apt version. An exact version is probably a bit much, but the simplest way out.
2015-11-04unbreak the copy-method claiming hashsum mismatch since ~exp9David Kalnischkies
Commit 653ef26c70dc9c0e2cbfdd4e79117876bb63e87d broke the camels back in sofar that everything works in terms of our internal use of copy:/, but external use is completely destroyed. This is kinda the reverse of what happened in "parallel" in the sid branch, where external use was mostly fine, internal and external exploded on the GzipIndexes option. We fix this now by rewriting our internal use by letting copy:/ only do what the name suggests it does: Copy files and not uncompress them on-the-fly. Then we teach copy and the uncompressors how to deal with /dev/null and use it as destination file in case we don't want to store the uncompressed files on disk. Closes: 799158
2015-09-14dereference redirect in Vcs-Browser URI to cgitDavid Kalnischkies
Git-Dch: Ignore
2015-08-31remove Christian Perrier from Uploaders as requestedDavid Kalnischkies
Closes: #783337 Thanks: Christian for all the l10n, code & social contributions!
2015-08-27add a libapt-pkg recommends aptDavid Kalnischkies
For many usecases like the acquire system libapt-pkg actually needs tools and config found in the apt package. apt tends to be installed everywhere libapt-pkg appears usually anyhow, but just in case to nudge users (and tools) in the right direction. Note that this isn't and shouldn't be a hard depends as there are usecases working perfectly without 'apt' and as this is such an esoteric problem incurring the costs arising from a Depends-Breaks-loop isn't deemd as worth it.
2015-08-17Re-add support for G++ 4.8 and configure travis to use itJulian Andres Klode
This makes tests work again! Gbp-Dch: ignore
2015-08-14debian/control: Remove XS- from Testsuite and bump Standards-VersionJulian Andres Klode
Thanks: Lintian
2015-08-14debian/control: Drop the versioned python-apt conflictJulian Andres Klode
Thanks: Lintian
2015-08-14debian/control: Replace debian by DebianJulian Andres Klode
Thanks: Lintian
2015-08-11debian/control: Rename libapt-pkg4.15 -> libapt-pkg5.0Julian Andres Klode
2015-08-11Bump apt-inst SONAME to 2.0 to adjust for the ABI break in apt-pkgJulian Andres Klode
2015-08-10enforce GCC5 C++11 ABI and usageDavid Kalnischkies
The library(s) make an API break anyhow, so lets ensure we use gcc5 for this break and enable c++11 as standard as gcc6 will use it as default and should provide some API parts for c++11 – beside that it can't hurt to use c++11 itself. We just have to keep our headers c++03 compatible to not enforce a standrd bump in our reverse dependencies.