summaryrefslogtreecommitdiff
path: root/debian
AgeCommit message (Collapse)Author
2016-01-14update symbols fileDavid Kalnischkies
git-Dch: Ignore
2016-01-09Version the build-depends on liblz4-dev to >= 0.0~r126Julian Andres Klode
We need r126 of lz4, as this introduces the lz4frame.h header.
2016-01-09Bump dpkg-dev and debhelper build-dep to make lintian happyJulian Andres Klode
This is not really needed anymore, as those are in stable, but as they are versioned already, let's just do it. Gbp-Dch: ignore
2016-01-09Do not break apt-file (<< 3.0~exp1~), 2.X works fineJulian Andres Klode
There's no point in breaking all older apt-file versions just because one old experimental upload was broken.
2016-01-09NEWS: Refer to apt(8) instead of apt(1)Julian Andres Klode
Reported-By: Mattia Rizzolo (on IRC) Gbp-Dch: ignore
2016-01-08Release 1.2~exp11.2_exp1Julian Andres Klode
2016-01-08Break apt-file (<< 3.0~exp1~)Julian Andres Klode
Gbp-Dch: ignore
2016-01-08Install bash completion with correct nameJulian Andres Klode
Move the completion to completions/bash/apt and install all bash completions from completions/bash. Gbp-Dch: ignore
2016-01-08libapt-pkg5.0: Add Breaks appstream (<< 0.9.0-3~)Julian Andres Klode
This ensures that a compatible version of appstream is installed, that is, one that disables lz4 compression for its data.
2016-01-08NEWS: Document recompression of indicesJulian Andres Klode
2016-01-07FileFd: (native) LZ4 supportJulian Andres Klode
Implement native support for LZ4 compression, using the official lz4 library.
2016-01-05Document new APT::Keep-Downloaded-Packages option in NEWSMichael Vogt
Git-Dch: ignore
2016-01-03Allow building without libgtest-dev under <nocheck> build profileHelmut Grohne
I'd like to avoid pulling libgtest-dev into the bootstrap set. Fortunately, libgtest-dev is only used for testing apt and apt correctly implements DEB_BUILD_OPTIONS=nocheck now. So this bug is about getting rid of the Build-Depends. Simply removing it (by adding a build profile) is not sufficient however as configure fails hard, so an additional bit is necessary to cover for that. Closes: #809726
2016-01-02Add bash-completion support for the "apt" commandMichael Vogt
The apt bash-completion support was submited to the bash-completion package as a patch in May 2014. It is still not included to this date and because it is an important feature for many users it is now part of apt until the bash-completion package is mantained more actively again. Note that the "Relaces" line is only required for Ubuntu it will have no effect on Debian. Closes: #747094
2016-01-02Add support for APT::Periodic::CleanIntervalMichael Vogt
In order to allow regular cleaning of the downloaded deb archives the new option APT::Periodic::CleanInterval is added. It will run "apt-get clean" in the given time interval. Thanks: Martin-Éric Racine
2015-12-30Release 1.1.101.1.10Julian Andres Klode
2015-12-27Release 1.1.91.1.9Julian Andres Klode
2015-12-26Release 1.1.81.1.8Julian Andres Klode
This release is made for Niels Thykier and apt-file.
2015-12-26Release 1.1.71.1.7Julian Andres Klode
2015-12-241.1.6 Christmas releaseJulian Andres Klode
2015-12-14Release 1.1.51.1.5Julian Andres Klode
2015-12-14debian/apt.auto-removal.sh: Adjust -dbg exclusion for multi-archJulian Andres Klode
Allow an optional colon followed by anything at the end.
2015-12-14tests: Depend on libfile-fcntllock-perl to shut up dpkg-gencontrolJulian Andres Klode
Ubuntu's autopkgtest server always prints dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe which is somewhat annoying. Work around that by depending on that perl stuff for the test suite. Gbp-Dch: ignore
2015-12-14redirect which stderr to /dev/null for consistencyDavid Kalnischkies
The "standard" which (debianutils) has no output whatsoever on stderr, bash and dash which use this implementation therefore haven't either. In zsh 'which' is a shell built-in – and has no stderr output either, it does print an error message on stdout… So, realistically, a redirection isn't needed at all, but it also can't hurt (<- I have said that before in this context ->) so why not for consistency with… well, not with "command -v" as that hasn't an error message either. Lets say for consistency with my mental image of shell, as I am still a bit puzzled by zsh's which and now could imagine even more strange things in other shells. Closes: 807373
2015-12-13update symbols files to 1.1.4 state of affairsDavid Kalnischkies
2015-12-07Release 1.1.41.1.4Julian Andres Klode
2015-12-07part revert, part redo 'which' replacementDavid Kalnischkies
In e75e5879 'replace "which" with "command -v" for portability' I missed that command -v isn't actually required to be available in debian, so for the 5 files we are using it: Two (abicheck/run_abi_test & test/integration/framework) are called in environments were I believe sh is at least dash or 'better' as the first one is "interactive" for apt developers and the later is sourced by ~200 tests in the same directory run by hand and ci-services – for the later we have pulled some uglier hacks for worser things already, so if there should actually end up needing something more compatible we will notice eventually (and the later actually had a command -v call for some time already and nobody came running). debian/rules and debian/apt.cron.daily I switched back to which as that is more or less debian-specific or at least highly non-critical. That leaves cmdline/apt-key.in with a bunch of calls where I will implement that functionality in shell as this is relatively short-lived as it is used to detect wget (for net-update, which Michael wants to revive and in that process will properly use apt-helper instead of wget) and to detect gpg vs. gpg2 systems, where the earlier is supposed to go away in the longrun (or the later, but by replacing the earlier…). [and this gpg/gpg2 detection is new in sid, so I have some sympathy for that being a problem now.] Thanks: Jakub Wilk for pointing out #747320
2015-12-06replace "which" with "command -v" for portabilityDavid Kalnischkies
which is a debian specific tool packaged in debianutils (essential) while command is a shell builtin defined by POSIX. Closes: 807144 Thanks: Mingye Wang for the suggestion.
2015-12-01add a apt breaks (apt-utils << 1.1.3) for partial-upgradesDavid Kalnischkies
You could think a0bf789783ea283914d059aea0f4d0f77d6bbaaf would be enough, but it turns out its only half of the puzzle. Closes: 806765 Suggested-By: Julian Andres Klode <jak@debian.org>
2015-11-30release 1.1.31.1.3Michael Vogt
Git-dch: ignore
2015-11-29add apt-utils Depends apt (= ${binary:Version})David Kalnischkies
As we ship some tools in apt-utils which depend on our private library we have to ensure that apt-utils depends on a proper apt version. An exact version is probably a bit much, but the simplest way out.
2015-11-29use function pointers instead of weak symbols for cmdline parsingDavid Kalnischkies
Passing function pointers around while working on this was very icky, but if weak symbols are too much to ask for… Reverts "do not use "-Wl,-Bsymbolic-functions" during the build to avoid breakage" aka a5fc9be36211a290a7abc3ca2a8bf98943bc1f57.
2015-11-28Release 1.1.21.1.2Julian Andres Klode
2015-11-28do not use "-Wl,-Bsymbolic-functions" during the build to avoid breakageMichael Vogt
2015-11-28autopkgtest: use the quiet mode as for travis and coDavid Kalnischkies
Git-Dch: Ignore
2015-11-27update arch-specific symbols in symbols fileDavid Kalnischkies
Git-Dch: Ignore
2015-11-27prepare 1.1.1 releaseMichael Vogt
2015-11-27use pre-build hook to check for pre-export executionDavid Kalnischkies
Git-Dch: Ignore
2015-11-27debian/gbp.conf: point debian-branch to masterMichael Vogt
Git-Dch: ignore
2015-11-26release apt 1.11.1Michael Vogt
2015-11-26Do not run pre*export* functions in the pre*build* hookMichael Vogt
Unfortunately it seems like git-buildpackage does not have a pre-export hook so the hook is disabled for now. Git-Dch: ignore
2015-11-25Prepare release 1.1~exp17Michael Vogt
2015-11-25typo: run s#frontend#front-end# on all of src:aptDavid Kalnischkies
The manpages were fixed by Justin B Rye, lets deal with the rest now. Git-Dch: Ignore
2015-11-24releasing package apt version 1.1~exp161.1_exp16Michael Vogt
2015-11-20fix a few typos in code-comments/apt manpageDavid Kalnischkies
Reported-By: codespell Git-Dch: Ignore
2015-11-19do not rerun ./configure causing FTCBFS with newer autotools-devDavid Kalnischkies
If the config.{sub,guess} files we linked in were newer than our configure script we ended up recreating configure and then rerun it without all the configuration options which were (potentially) present for a previous run. We avoid this by changing to the same ruleset as in the debian/rules file which compares the config.* files against a stamp file rather than the configure script itself as its the configuration itself which depends on all scripts, not configure on the config scripts. While at it, we also drop the 'make -s dirs' call as we don't need to do it explicitly here as proper dependencies will take care of it. Thanks: Helmut Grohne for the detailed bugreport. Closes: 804923
2015-11-19update libapt-{pkg,inst} symbols filesDavid Kalnischkies
2015-11-11releasing package apt version 1.1~exp151.1_exp15Michael Vogt
2015-11-04unbreak the copy-method claiming hashsum mismatch since ~exp9David Kalnischkies
Commit 653ef26c70dc9c0e2cbfdd4e79117876bb63e87d broke the camels back in sofar that everything works in terms of our internal use of copy:/, but external use is completely destroyed. This is kinda the reverse of what happened in "parallel" in the sid branch, where external use was mostly fine, internal and external exploded on the GzipIndexes option. We fix this now by rewriting our internal use by letting copy:/ only do what the name suggests it does: Copy files and not uncompress them on-the-fly. Then we teach copy and the uncompressors how to deal with /dev/null and use it as destination file in case we don't want to store the uncompressed files on disk. Closes: 799158
2015-10-30orderlist: Replace qsort() by thread-safe std::sort()Julian Andres Klode
Gbp-Dch: ignore