summaryrefslogtreecommitdiff
path: root/debian
AgeCommit message (Collapse)Author
2017-04-25Release 1.3.61.3.6Julian Andres Klode
2017-04-25systemd: Rework timing and add After=network-onlineJulian Andres Klode
The timeout values were so large that the timer could run at any random time of the day, possibly easily interfering with business hours, and causing trouble. Reduce them to 30 minutes of random delay and an accuracy to the default value (1 minute). Also drop the 18:00 event. People still actively use their device during that time, and for servers, there might be less attendance than in the regular 06:00 time slot, so longer time to fix things if something breaks. During a boot, the service might be run to catch up with a timer that would have normally elapsed. Due to no dependencies, it would have run before the network is online - that's bad. Adding an After and a Wants fixes that for boots, but still leaves the same issue for Resume. LP: #1615482 (cherry picked from commit b4f32b13055287d2ac46a08255db475af195b5f7)
2017-02-27Release 1.3.51.3.5Julian Andres Klode
2017-02-22show output as documented for APT::Periodic::Verbose 2Paul Wise
The documentation of APT::Periodic::Verbose doesn't match the code, specifically level 2 should apply some things differently to level 1 but does not because it uses `-le 2` instead of `-lt 2` or `-le 1`. Closes: 845599 (cherry picked from commit 250687865e2d27dc949b810e59b07161a4c8f762)
2017-02-22reset HOME, USER(NAME), TMPDIR & SHELL in DropPrivilegesDavid Kalnischkies
We can't cleanup the environment like e.g. sudo would do as you usually want the environment to "leak" into these helpers, but some variables like HOME should really not have still the value of the root user – it could confuse the helpers (USER) and HOME isn't accessible anyhow. Closes: 842877 (cherry picked from commit 34b491e735ad47c4805e63f3b83a659b8d10262b)
2017-01-17Release 1.3.41.3.4Julian Andres Klode
2016-12-14Release 1.3.31.3.3Julian Andres Klode
2016-12-14Do not (re)start "apt-daily.system"Michael Vogt
This unit runs unattended-upgrades. If apt itself is part of the upgrade a restart of the unit will kill unattended-upgrades. This will lead to an inconsistent dpkg status. Closes: #841763 Thanks: Alexandre Detiste (cherry picked from commit e133bb5e81b10bf059b3abeab2d9e41f7206e446) LP: #1649959
2016-12-08Release 1.3.2 security update1.3.2Julian Andres Klode
2016-12-08Hack around Ubuntu rejecting symlink copyrightJulian Andres Klode
2016-12-08debian/gbp.conf: Update for 1.3.y branchJulian Andres Klode
Gbp-Dch: ignore
2016-10-04Release 1.3.11.3.1Julian Andres Klode
2016-09-20Release 1.31.3Julian Andres Klode
2016-09-02Release 1.3~rc41.3_rc4Julian Andres Klode
2016-09-02debian: Pass -O to make to get readable build logsJulian Andres Klode
Normally make just lets every job write its output directly, making the log fairly hard to read with high concurrency.
2016-09-02debian: Move bugscript to old location for overlayfs xdev issueJulian Andres Klode
dpkg on overlayfs cannot rename apt/script to apt, because overlayfs will not let it move apt to a backup name, responding with XDEV instead.
2016-09-01re-add apt breaks/replaces apt-utils (<< 1.3~exp2~)David Kalnischkies
The recently added (increased actually) Breaks were accidently dropped while our set of mostly old and outdated breaks was cleaned up. Regression-From: 20d2f4a4f164cd9026dad698e471c95d7c28973b Previously-Add-In: ab07af708e49c9219940ffd3e20a01c763267e03 Closes: #836220
2016-08-30Release 1.3~rc31.3_rc3Julian Andres Klode
2016-08-29Add new symbols to symbols fileJulian Andres Klode
There are some optional symbols missing now, but let's keep them in for now, maybe they reappear/still exist on other platforms. The newly added ones actually appeared in older versions already, but there's no huge gain in finding out when precisely we added them.
2016-08-26Lower-case uname -r output in kernel autoremove helperJulian Andres Klode
This is needed on FreeBSD which has versions like 11.0-RC1, otherwise the tests would fail.
2016-08-20debian: Get rid of dh_movefiles againJulian Andres Klode
This workaround is a bit more ugly, but does not use a (somewhat) deprecated debhelper command. Gbp-Dch: ignore
2016-08-19debian: Run wrap-and-sortJulian Andres Klode
Manually clean up the apt.maintscript, it moved stuff from before the comment to after the comment...
2016-08-19debian: Drop outdated stuffJulian Andres Klode
The README.source is not usable anymore, and the Build-Conflicts andd Breaks/Replaces are not needed anymore.
2016-08-19debian: Add more lintian overridesJulian Andres Klode
2016-08-19debian: Switch to debhelper 10Julian Andres Klode
debhelper 10 is much nicer with the installation part from a dirty tree, so you can just fix some stuff breaking the install step and then continue building with debuild -b -nc until you have fixed all your stuff. It also has some other advantages, of course, like some bug fixes in shell escaping for maintscript, or systemd helper changes.
2016-08-19debian: Make better use of the tree installed by CMakeJulian Andres Klode
This gets rid of the special casing of etc/apt, various example file installations handled by the upstream build system, and of course the directory creation for all dirs created by the upstream build system.
2016-08-19tests/control: Handle the gpg1/gpg2 mess a bit betterJulian Andres Klode
Hardcoding gpgv1 and gnupg1 breaks Ubuntu, because on Ubuntu, these packages do not exist yet. Instead allow gnupg (<< 2) for gnupg1 and gnupg2 for gnupg (>= 2), so we cover all potential combinations.
2016-08-18debian: Install etc/apt if present (e.g., on Ubuntu)Julian Andres Klode
On Ubuntu, cmake installs are vendor-specific apt.conf.d snippet, causing the build to fail.
2016-08-17Release 1.3~rc21.3_rc2Julian Andres Klode
2016-08-17add the gpg-classic variant to the gpgv/gnupg or-groupDavid Kalnischkies
We need to support partial upgrades anyhow, so we have to deal with the different versions and your tests try to ensure that we do, so we shouldn't make any explicit higher requirements.
2016-08-15CMake: Install bash completions via cmakeJulian Andres Klode
Having the completions installed only by the packaging was an oversight. Gbp-Dch: ignore
2016-08-13Change anonscm.d.o links to /git/apt/apt.git and httpsJulian Andres Klode
This also fixes Debian/apt#20, but is slightly more complete. I think /git also looks better than /cgit, so let's switch the Vcs entry in control over too.
2016-08-12ctest: show test output in case of failuresDavid Kalnischkies
ctest as run by cmake by default does not show the output of the tests even if the tests failed. In terms of our tests it could be handy to set it always, but unfortunately it seems like cmake doesn't allow it if the internet is to be believed, so lets enable it at least while building packages and on travis. Gbp-Dch: Ignore
2016-08-11CMake: Exclude .md5 and .map doxygen files from installJulian Andres Klode
This is much better than removing them in debian/rules. Gbp-Dch: ignore
2016-08-11debian/NEWS: Get rid of 1.3~pre3+cmake1 entryJulian Andres Klode
This was only needed temporarily Thanks: Axel Beckert for reporting
2016-08-11Release 1.3~rc11.3_rc1Julian Andres Klode
This commit looks heavy. Most of that comes from the fact that the ordering of files in the translations changed with the switch to CMake. I could have gone the extra mile to figure out the original ordering and replicate it, but I have chosen to re-order everything by file and line number, as that's easier.
2016-08-10CMake: Rewrite existing Documentation support and add doxygenJulian Andres Klode
This can now build all documentation. It should also be fairly reusable for other projects, as long as they follow the same naming scheme for the po4a output files and set the PACKAGE_* variables used here. We could have done all translations in a single call to po4a like the makefile based buildsystem does. While that would have made the output slightly nicer, this solution offers a huge performance gain because it can translate the documents in parallel, which also means that the xsltproc stage does not have to wait for all translations to be done first. You might think that the add_custom_command() should list the actual output files as BYPRODUCTS. This is not true however: Because the files are not always generated, Ninja will think missing byproducts mean that the target is out of date - which is not what we want. Finally, also add the missing doxygen support. Note that the packaging script cleans up some md5 and map files created by doxygen, otherwise it is fairly boring.
2016-08-10CMake: Bump minimum required version to 3.4.0Julian Andres Klode
The SOURCE_DIR property is used for the translation building and was introduced in cmake 3.4
2016-08-10debian: make autopkgtest run with CMake build dirJulian Andres Klode
2016-08-06releasing package apt version 1.3~pre3+cmake21.3_pre3+cmake2Julian Andres Klode
2016-08-06Build-depend on pkg-configJulian Andres Klode
2016-08-06releasing package apt version 1.3~pre3+cmake11.3_pre3+cmake1Julian Andres Klode
2016-08-06CMake: debian: Switch packaging over to CMake and dh 9Julian Andres Klode
This new packaging is much easier to read, although the duplication in the install files is a bit annoying. We should probably also get rid of the movefiles for solvers, planners, and https method; but then we have to keep track of which methods exist in the apt package. Another disadvantage is that building only the documentation packages also requires building the code, as there's no way to turn off code building in the project.
2016-08-06debian/control: Use versioned provides for same-ver library depsJulian Andres Klode
This simplifies the design a bit, as we do not need to read the major ABI version number from some file / command. Gbp-Dch: ignore
2016-08-04Release 1.3~pre31.3_pre3Julian Andres Klode
2016-07-08Release 1.3~pre21.3_pre2Julian Andres Klode
Yes, we might still add new features to 1.3 or break some more stuff. Stay tuned!
2016-07-08Add kernels with "+" in the package name to APT::NeverAutoRemoveAndrew Patterson
Escape "+" in kernel package names when generating APT::NeverAutoRemove list so it is not treated as a regular expression meta-character. [Changed by David Kalnischkies: let test actually test the change] Closes: #830159
2016-07-07Release 1.3~pre11.3_pre1Julian Andres Klode
2016-06-29eipp: let apt make a plan, not make stuff planeDavid Kalnischkies
Julian noticed on IRC that I fall victim to a lovely false friend by calling referring to a 'planer' all the time even through these are machines to e.g. remove splinters from woodwork ("make stuff plane"). The term I meant is written in german in this way (= with a single n) but in english there are two, aka: 'planner'. As that is unreleased code switching all instances without any transitional provisions. Also the reason why its skipped in changelog. Thanks: Julian Andres Klode Gbp-Dch: Ignore
2016-06-27eipp: provide the internal planer as an external oneDavid Kalnischkies
Testing the current implementation can benefit from being able to be feed an EIPP request and produce a fully compliant response. It is also a great test for EIPP in general.