| Age | Commit message (Collapse) | Author |
|---|
|
This enables more fine grained control over such exceptions.
|
|
'files' is a bit too generic as a name for a command usually only used
programmatically (if at all) by developers, so instead of "wasting" this
generic name for this we use "indextargets" which is actually the name
of the datastructure the displayed data is stored in.
Along with this rename the config options are renamed accordingly.
|
|
These options could be set via configuration before, but the connection
to the actual sources is so strong that they should really be set in the
sources.list instead – especially as this can be done a lot more
specific rather than e.g. disabling Valid-Until for all sources at once.
Valid-Until-* names are chosen instead of the Min/Max-ValidTime as this
seems like a better name and their use in the wild is probably low
enough that this isn't going to confuse anyone if we have to names for
the same thing in different areas.
In the longrun, the config options should be removed, but for now
documentation hinting at the new options is good enough as these are the
kind of options you set once across many systems with different apt
versions, so the new way should work everywhere first before we
deprecate the old way.
|
|
Provided is a specialized acquire item which given a version can figure
out the correct URI to try by itself and if not provides an error
message alongside with static methods to get just the URI it would try
to download if it should just be displayed or similar such.
The URI is constructed as follows:
Release files can provide an URI template in the "Changelogs" field,
otherwise we lookup a configuration item based on the "Label" or
"Origin" of the Release file to get a (hopefully known) default value
for now. This template should contain the string CHANGEPATH which is
replaced with the information about the version we want the changelog
for (e.g. main/a/apt/apt_1.1). This middleway was choosen as this path
part was consistent over the three known implementations (+1 defunct),
while the rest of the URI varies widely between them.
The benefit of this construct is that it is now easy to get changelogs
for Debian packages on Ubuntu and vice versa – even at the moment where
the Changelogs field is present nowhere. Strictly better than what
apt-get had before as it would even fail to get changelogs from
security… Now it will notice that security identifies as Origin: Debian
and pick this setting (assuming again that no Changelogs field exists).
If on the other hand security would ship its changelogs in a different
location we could set it via the Label option overruling Origin.
Closes: 687147, 739854, 784027, 787190
|
|
Downloading additional files is only half the job. We still need a way
to allow external tools to know where the files are they requested for
download given that we don't want them to choose their own location.
'apt-get files' is our answer to this showing by default in a deb822
format information about each IndexTarget with the potential to filter
the records based on lines and an option to change the output format.
The command serves also as an example on how to get to this information
via libapt.
|
|
Acquire{MaxReleaseFileSize,AllowInsecureRepositories,AllowDowngradeToInsecureRepositories} and --no-allow-insecure-repositories
Document the new options to restrict loading unauthenticated data
into our parsers.
|
|
Not all are needed for all files at the moment, but the new docbook
building hadn't available some of the entities it used as the files
weren't correctly copied around in all cases and having the same across
the bord makes working with all of them a little easier.
Git-Dch: Ignore
|
|
Closes: 745452
|
|
Inspired by the rest of the patch in 661537, but abstract the
parsing of various ways of setting the build profiles more so it can
potentially be reused and all apt parts have the same behaviour.
Especially config options, cmdline options and environment will not be
combined as proposed as this isn't APTs usual behaviour and dpkg doesn't
do it either, so one overrides the other as it normally does.
|
|
The current description says:
"Many users find dselect intimidating and new users may prefer to use
apt-based user interfaces."
It doesn't feel right to refer users to it then.
Closes: 617625
|
|
|
|
manpages sometimes refer to distro-specific things like the name of the
package providing the achive-keyring. Having a central place to
configure this helps in having it consistent in the manpages and allows
to load this info from other places in the buildsystem as well later.
|
|
|
|
|
|
|
|
|
|
- review and fix spelling issues
|
|
- use apt-utils as package example instead of libc6
|
|
to "The <literal>dist-upgrade</literal> command may therefore remove some packages."
|
|
- move dselect-upgrade below dist-upgrade
|
|
- remove 'GNU/Linux' from 'Debian systems' strings as Debian
has more systems than just GNU/Linux nowadays
|
|
|
|
|
|
|
|
as untranslated for po4a removing ~200 unless "translateable" strings
|
|
- add a few translator notes and reword some paragraphs to ensure that
translators and users alike can better understand them (Closes: #669409)
|
|
- move the command synopsis out of each manpage into apt-verbatim.ent
as they are a hell to translate and just single out the parameters
which can be translated to apt.ent
|
|
* doc/apt-get.8.xml:
- add 'download' to the usage line (Closes: #649340)
|
|
- typofix: respect → respecting, thanks Mike Erickson! (Closes: #664833)
|
|
|
|
* doc/*.xml:
- find and fix a bunch of misspellings
|
|
|
|
- change wording of autoremove description as suggested
by Robert Simmons, thanks! (Closes: #641490)
|
|
* apt-pkg/contrib/sha1.cc:
- fix illegally casts of on-stack buffer to a type requiring more
alignment than it has resulting in segfaults on sparc (Closes: #634696)
* apt-pkg/contrib/cdromutl.cc:
- fix escape problem when looking for the mounted devices
* apt-pkg/contrib/strutl.{h,cc}, test/libapt/strutil_test.cc:
- add new DeEscapeString() similar to DeQuoteString but
unescape character escapes like \0XX and \xXX (plus added
test)
* refresh po/*
* cmdline/apt-get.cc:
- fix missing download progress in apt-get download
- do not require unused partial dirs in 'source' (Closes: #633510)
- buildconflicts effect all architectures
- implement MultiarchCross for build-dep and source (Closes: #632221)
* cmdline/apt-key:
- use a tmpfile instead of /etc/apt/secring.gpg (Closes: #632596)
* debian/apt.postinst:
- remove /etc/apt/secring.gpg if it is an empty file
* doc/apt-cache.8.xml:
- apply madison typofix from John Feuerstein, thanks! (Closes: #633455)
* apt-pkg/policy.cc:
- emit an error on unknown APT::Default-Release value (Closes: #407511)
* apt-pkg/aptconfiguration.cc:
- ensure that native architecture is if not specified otherwise the
first architecture in the Architectures vector
* apt-pkg/deb/deblistparser.cc:
- Strip only :any and :native if MultiArch should be stripped as it is
save to ignore them in non-MultiArch contexts but if the dependency
is a specific architecture (and not the native) do not strip
|
|
|
|
- add an --assume-no option for testing to say 'no' to everything
|
|
|
|
- add --install-suggests option (Closes: #473089)
|
|
[ David Kalnischkies ]
* apt-pkg/depcache.cc:
- add SetCandidateRelease() to set a candidate version and
the candidates of dependencies if needed to a specified
release (Closes: #572709)
* cmdline/apt-get.cc:
- if --print-uris is used don't setup downloader as we don't need
progress, lock nor the directories it would create otherwise
- show dependencies of essential packages which are going to remove
only if they cause the remove of this essential (Closes: #601961)
- keep not installed garbage packages uninstalled instead of showing
in the autoremove section and installing those (Closes: #604222)
- change pkg/release behavior to use the new SetCandidateRelease
so installing packages from experimental or backports is easier
- really do not show packages in the extra section if they were
requested on the commandline, e.g. with a modifier (Closes: #184730)
* debian/control:
- add Vcs-Browser now that loggerhead works again (Closes: #511168)
- depend on debhelper 7 to raise compat level
- depend on dpkg-dev (>= 1.15.8) to have c++ symbol mangling
* apt-pkg/contrib/fileutl.cc:
- add a RealFileExists method and check that your configuration files
are real files to avoid endless loops if not (Closes: #604401)
- ignore non-regular files in GetListOfFilesInDir (Closes: #594694)
* apt-pkg/contrib/weakptr.h:
- include stddefs.h to fix compile error (undefined NULL) with gcc-4.6
* methods/https.cc:
- fix CURLOPT_SSL_VERIFYHOST by really passing 2 to it if enabled
* deb/dpkgpm.cc:
- fix popen/fclose mismatch reported by cppcheck. Thanks to Petter
Reinholdtsen for report and patch! (Closes: #607803)
* doc/apt.conf.5.xml:
- fix multipl{y,e} spelling error reported by Jakub Wilk (Closes: #607636)
* apt-inst/contrib/extracttar.cc:
- let apt-utils work with encoded tar headers if uid/gid are large.
Thanks to Nobuhiro Hayashi for the patch! (Closes: #330162)
* apt-pkg/cacheiterator.h:
- do not segfault if cache is not build (Closes: #254770)
* doc/apt-get.8.xml:
- remove duplicated mentioning of --install-recommends
* doc/sources.list.5.xml:
- remove obsolete references to non-us (Closes: #594495)
* debian/rules:
- use -- instead of deprecated -u for dh_gencontrol
- remove shlibs.local creation and usage
- show differences in the symbol files, but never fail
* pre-build.sh:
- remove as it is not needed for a working 'bzr bd'
* debian/{apt,apt-utils}.symbols:
- ship experimental unmangled c++ symbol files
* methods/rred.cc:
- operate optional on gzip compressed pdiffs
* apt-pkg/acquire-item.cc:
- don't uncompress downloaded pdiff files before feeding it to rred
- try downloading clearsigned InRelease before trying Release.gpg
- change the internal handling of Extensions in pkgAcqIndex
- add a special uncompressed compression type to prefer those files
- download and use i18n/Index to choose which Translations to download
* cmdline/apt-key:
- don't set trustdb-name as non-root so 'list' and 'finger'
can be used without being root (Closes: #393005, #592107)
* apt-pkg/deb/deblistparser.cc:
- rewrite LoadReleaseInfo to cope with clearsigned Releasefiles
* ftparchive/writer.cc:
- add config option to search for more patterns in release command
- include Index files by default in the Release file
* methods/{gzip,bzip}.cc:
- print a good error message if FileSize() is zero
* apt-pkg/aptconfiguration.cc:
- remove the inbuilt Translation files whitelist
|
|
- remove duplicated mentioning of --install-recommends
|
|
|
|
|
|
|
|
|
|
- move some strings into apt-verbatim.ent to avoid showing them in
apt-doc.pot as they are untranslatable anyway (e.g. manpage references)
|
|
|
|
- do not say explicit target_release_{name,version,codename}, it should
be clear by itself and 'man' can break lines again (Closes: #566166)
|
|
- add a --only-upgrade flag to install command (Closes: #572259)
That is NOT what is requested in e.g. #74067 - this is a very simple
flag which behaves orthogonal to --no-upgrade not a full-blown
upgrade option for a single package instead of the whole package set.
|
|
in doc/apt-get.8.xml, namely:
- change equivalent "for" to "to the" (purge command)
- clarify --fix-broken sentence about specifying packages
|
|
Patch by Chris Leick which closes his on bug. Thanks!
* doc/ various manpages:
- correct various errors, typos and oddities (Closes: #552535)
* doc/apt-secure.8.xml:
- replace literal with emphasis tags in Archive configuration
|
