| Age | Commit message (Collapse) | Author |
|---|
|
Thanks: Julian Andres Klode
Git-Dch: ignore
|
|
Git-Dch: ignore
|
|
[Commiter: Patch adapted to apply to current version of the manpage and
added/moved a few words about Version 3 to make it fit better]
Closes: 627188
|
|
RootDir doesn't only effect Dir-scope but all FindDir directories, so
document it accordingly.
Closes: 659387
|
|
These options could be set via configuration before, but the connection
to the actual sources is so strong that they should really be set in the
sources.list instead – especially as this can be done a lot more
specific rather than e.g. disabling Valid-Until for all sources at once.
Valid-Until-* names are chosen instead of the Min/Max-ValidTime as this
seems like a better name and their use in the wild is probably low
enough that this isn't going to confuse anyone if we have to names for
the same thing in different areas.
In the longrun, the config options should be removed, but for now
documentation hinting at the new options is good enough as these are the
kind of options you set once across many systems with different apt
versions, so the new way should work everywhere first before we
deprecate the old way.
|
|
Provided is a specialized acquire item which given a version can figure
out the correct URI to try by itself and if not provides an error
message alongside with static methods to get just the URI it would try
to download if it should just be displayed or similar such.
The URI is constructed as follows:
Release files can provide an URI template in the "Changelogs" field,
otherwise we lookup a configuration item based on the "Label" or
"Origin" of the Release file to get a (hopefully known) default value
for now. This template should contain the string CHANGEPATH which is
replaced with the information about the version we want the changelog
for (e.g. main/a/apt/apt_1.1). This middleway was choosen as this path
part was consistent over the three known implementations (+1 defunct),
while the rest of the URI varies widely between them.
The benefit of this construct is that it is now easy to get changelogs
for Debian packages on Ubuntu and vice versa – even at the moment where
the Changelogs field is present nowhere. Strictly better than what
apt-get had before as it would even fail to get changelogs from
security… Now it will notice that security identifies as Origin: Debian
and pick this setting (assuming again that no Changelogs field exists).
If on the other hand security would ship its changelogs in a different
location we could set it via the Label option overruling Origin.
Closes: 687147, 739854, 784027, 787190
|
|
Acquire{MaxReleaseFileSize,AllowInsecureRepositories,AllowDowngradeToInsecureRepositories} and --no-allow-insecure-repositories
Document the new options to restrict loading unauthenticated data
into our parsers.
|
|
Conflicts:
apt-pkg/acquire-item.cc
configure.ac
debian/changelog
doc/apt-verbatim.ent
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pt.po
po/ar.po
po/ast.po
po/bg.po
po/bs.po
po/ca.po
po/cs.po
po/cy.po
po/da.po
po/de.po
po/dz.po
po/el.po
po/es.po
po/eu.po
po/fi.po
po/fr.po
po/gl.po
po/hu.po
po/it.po
po/ja.po
po/km.po
po/ko.po
po/ku.po
po/lt.po
po/mr.po
po/nb.po
po/ne.po
po/nl.po
po/nn.po
po/pl.po
po/pt.po
po/pt_BR.po
po/ro.po
po/ru.po
po/sk.po
po/sl.po
po/sv.po
po/th.po
po/tl.po
po/tr.po
po/uk.po
po/vi.po
po/zh_CN.po
po/zh_TW.po
test/integration/test-ubuntu-bug-346386-apt-get-update-paywall
|
|
Not all are needed for all files at the moment, but the new docbook
building hadn't available some of the entities it used as the files
weren't correctly copied around in all cases and having the same across
the bord makes working with all of them a little easier.
Git-Dch: Ignore
|
|
Conflicts:
apt-pkg/deb/deblistparser.cc
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pl.po
doc/po/pt.po
doc/po/pt_BR.po
po/da.po
po/mr.po
po/vi.po
|
|
Closes: #753531
|
|
Now that methods have the expected hashes available they can check if
the response from the server is what they expected. Pipelining is one of
those areas in which servers can mess up by not supporting it properly,
which forced us to disable it for the time being. Now, we check if
we got a response out of order, which we can not only use to disable
pipelining automatically for the next requests, but we can fix it up
just like the server responded in proper order for the current requests.
To ensure that this little trick works pipelining is only attempt if we
have hashsums for all the files in the chain which in theory reduces the
use of pipelining usage even on the many servers which work properly,
but in practice only the InRelease file (or similar such) will be
requested without a hashsum – and as it is the only file requested in
that stage it can't be pipelined even if we wanted to.
Some minor annoyances remain: The display of the progress we have
doesn't reflect this change, so it looks like the same package gets
downloaded multiple times while others aren't at all. Further more,
partial files are not supported in this recovery as the received data
was appended to the wrong file, so the hashsum doesn't match.
Both seem to be minor enough to reenable pipelining by default until
further notice through to test if it really solves the problem.
This therefore reverts commit 8221431757c775ee875a061b184b5f6f2330f928.
|
|
This debug option will display all scripts that are run
by apts RunScripts and RunScriptsWithPkgs helpers.
|
|
Inspired by the rest of the patch in 661537, but abstract the
parsing of various ways of setting the build profiles more so it can
potentially be reused and all apt parts have the same behaviour.
Especially config options, cmdline options and environment will not be
combined as proposed as this isn't APTs usual behaviour and dpkg doesn't
do it either, so one overrides the other as it normally does.
|
|
manpages sometimes refer to distro-specific things like the name of the
package providing the achive-keyring. Having a central place to
configure this helps in having it consistent in the manpages and allows
to load this info from other places in the buildsystem as well later.
|
|
Francesco Poli)
|
|
|
|
This adds ::InfoFD option alongside the ::Version one to request sending
the information to the specified FD, by default it is STDIN as it was
the case before.
The environment variable APT_HOOK_INFO_FD contains the FD the data is on as
a confirmation that the APT version used understood the request.
Allowing the hook to choose the FD is needed/helpful e.g. for shellscripts
which have a hard time accessing FDs above 9 (as >= 10 are usually used
internally by them)
Closes: #671728
|
|
(closes: #705445)
Conflicts:
debian/changelog
|
|
Adds on top of Version 2 to all displayed version numbers the
architecture as well as the MultiArch flag for consumption by the hooks.
Most of the time the architecture will be the same for both versions
displayed, but packages might change from "all" to "any" (or back)
between versions so we can't display the architecture for packages.
Pseudo-Format for Version 3:
<name> <version> <arch> <m-a-flag> <compare> <version> <arch> <m-a-flag>
Examples:
stuff - - none < 1 amd64 none **CONFIGURE**
libsame 1 i386 same < 2 i386 same **CONFIGURE**
stuff 2 i386 none > 1 i386 none **CONFIGURE**
libsame 2 i386 same > - - none **REMOVE**
toolkit 1 all foreign > - - none **REMOVE**
Closes: #712116
|
|
Closes: #711921
|
|
- document Acquire::ForceIPv{4,6}
|
|
|
|
- review and fix typo, grammar and style issues
- rephrase APT::Immediate-Configuration and many others
|
|
doc/apt_preferences.5.xml:
- review and fix spelling issues
|
|
- replace CDROM with the proper CD-ROM in text
|
|
|
|
|
|
|
|
|
|
as untranslated for po4a removing ~200 unless "translateable" strings
|
|
- add a few translator notes and reword some paragraphs to ensure that
translators and users alike can better understand them (Closes: #669409)
|
|
- after many years of pointless discussions disable http/1.1 pipelining
by default as many webservers and proxies seem to be unable to conform
to specification must's (rfc2616 section 8.1.2.2) (LP: #996151)
|
|
* doc/*.xml:
- find and fix a bunch of misspellings
|
|
- apply spelling fix by Kevin Lyda, thanks! (Closes: #644104)
|
|
* doc/apt.conf.5.xml:
- reword Acquire::Max-ValidTime documentation to make clear
that it doesn't provide the new Min-ValidTime functionality
|
|
- document APT::Architectures list (Closes: #612102)
|
|
|
|
|
|
- add a special uncompressed compression type to prefer those files
* methods/{gzip,bzip}.cc:
- print a good error message if FileSize() is zero
|
|
- fix multipl{y,e} spelling error reported by Jakub Wilk (Closes: #607636)
|
|
- move some strings into apt-verbatim.ent to avoid showing them in
apt-doc.pot as they are untranslatable anyway (e.g. manpage references)
|
|
* debian/rules:
- Make DEB_BUILD_OPTIONS=noopt actually work by passing the right
CXXFLAGS.
* apt-pkg/contrib/fileutl.{h,cc}:
- Add support for reading of gzipped files with the new "ReadOnlyGzip"
OpenMode. (Closes: #188407)
- Link against zlib (in apt-pkg/makefile) and add zlib build dependency.
- [ABI BREAK] This adds a new private member to FileFd, but its
initialization is in the public header file.
* configure.in:
- Check for zlib library and headers.
* apt-pkg/acquire-item.cc, apt-pkg/deb/debindexfile.cc,
apt-pkg/deb/debrecords.cc, apt-pkg/deb/debsrcrecords.h,
cmdline/apt-cache.cc:
- Open Packages, Sources, and Translations indexes in "ReadOnlyGzip" mode.
* apt-pkg/deb/debindexfile.cc:
- If we do not find uncompressed package/source/translation indexes, look
for gzip compressed ones.
* apt-pkg/acquire-item.cc:
- If the Acquire::GzipIndexes option is true and we download a gzipped
index file, keep it as it is (and rename to .gz) instead of
uncompressing it.
* doc/apt.conf.5.xml:
- Document the new Acquire::GzipIndexes option.
* doc/po/apt-doc.pot, doc/po/de.po:
- German translation of new Acquire::GzipIndexes option.
* Add test/test-indexes.sh:
- Test behaviour of index retrieval and usage, in particular with
uncompressed and gzip compressed indexes.
* methods/gzip.cc: With FileFd now being able to read gzipped files, there
is no need for the gzip method any more to spawn an external gzip process.
Rewrite it to use FileFd directly, which makes the code a lot simpler, and
also using less memory and overhead.
|
|
- add and document APT::Cache-{Start,Grow,Limit} options for mmap control
|
|
- show notice about ignored file instead of being always silent
- add a Dir::Ignore-Files-Silently list option to control the notice
*
|
|
- Document the new Acquire::GzipIndexes option.
|
|
|
|
- add entities for the current oldstable/stable/testing codenames
* doc/sources.list.5.xml:
- use stable-codename instead of stable in the examples (Closes: #531492)
* doc/apt_preferences.5.xml:
- adapt some examples here to use current codenames as well
|
|
file if no extension is enforced (= restore old behaviour). (Closes: #565213)
This commit includes also:
* apt-pkg/policy.cc:
- accept also partfiles with "pref" file extension as valid
* apt-pkg/contrib/configuration.cc:
- accept also partfiles with "conf" file extension as valid
* doc/apt.conf.5.xml:
- reorder description and split out syntax
- add partfile name convention (Closes: #558348)
* doc/apt_preferences.conf.5.xml:
- describe partfile name convention also here
And a lovely test application of course.
|
|
W: apt: spelling-error-in-manpage usr/share/man/man5/apt.conf.5.gz enviroment environment
|
