| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Closes: #840757
|
|
Gbp-Dch: Ignore
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CDN service deb.d.o is more reliable than the http
redirector, so switch to it for our examples.
|
|
I probably missed that when I did the usability work. But better
late than never.
|
|
Distributions seem to install this stuff all over the place, so
let's add a common list of paths we know about.
|
|
|
|
We support "./foobar.deb" as a way to install a deb file directly.
Recently .changes files were added. This highlights a problem as you
can't add the changes file without also trying to install all of them.
Now, it could also be handy to add entire Packages/Sources files to
perhaps get a bunch of packages in without installing them all
implicitly.
This commit introduces --with-source which allows to add *.deb, *.changes,
*.dsc, source-dirs, Packages & Sources files (the later can also be
compressed) without also installing them.
|
|
This is much better than removing them in debian/rules.
Gbp-Dch: ignore
|
|
Seems like I missed that when adding doxygen support.
Gbp-Dch: ignore
|
|
This commit looks heavy. Most of that comes from the fact that the
ordering of files in the translations changed with the switch to
CMake. I could have gone the extra mile to figure out the original
ordering and replicate it, but I have chosen to re-order everything
by file and line number, as that's easier.
|
|
This enhances commit b9e6db821a6ddbc5bf6a90c80c296d4e91283a63.
Gbp-Dch: ignore
|
|
|
|
With b4450f1dd6bca537e60406b2383ab154a3e1485f we dropped what we
calculated here later on and now that we don't need it in the meantime
either we can just skip the busy work by default and expect dpkg to do
the right thing dropping also our little "last explicit configures"
removal trick introduced in b4450f1dd6bca537e60406b2383ab154a3e1485f.
This enables the last of a bunch of previously experimental options,
some of them existing still, but are very special and hence not really
worth documenting anymore (especially as it would need to be rewritten
now entirely) which is why the documentation is nearly completely
dropped.
The order of configuration stanzas in the simulation code changes
slightly as it isn't concerning itself with finding the 'right' order,
but any order is valid anyhow as long as the entire set happens in the
same call.
|
|
Reported-By: Johannes 'josch' Schauer on IRC
Gbp-Dch: Ignore
|
|
Telling dpkg early on that we are going to remove these packages later
helps it with auto-deconfiguration decisions and its another area where
a planner can ignore the nitty gritty details and let dpkg decide the
course of action if there are no special requirements.
|
|
Bye, bye, old friend.
|
|
This can now build all documentation. It should also be fairly
reusable for other projects, as long as they follow the same
naming scheme for the po4a output files and set the PACKAGE_*
variables used here.
We could have done all translations in a single call to po4a
like the makefile based buildsystem does. While that would
have made the output slightly nicer, this solution offers a
huge performance gain because it can translate the documents
in parallel, which also means that the xsltproc stage does not
have to wait for all translations to be done first.
You might think that the add_custom_command() should list the
actual output files as BYPRODUCTS. This is not true however:
Because the files are not always generated, Ninja will think
missing byproducts mean that the target is out of date - which
is not what we want.
Finally, also add the missing doxygen support. Note that the
packaging script cleans up some md5 and map files created by
doxygen, otherwise it is fairly boring.
|
|
|
|
|
|
Build HTML docbook guides (untranslated) and manual pages
(including translations). Also install the examples in the
example subdirectory.
Translation of docbook guides has not been implemented yet,
but should be easy to do. The code also needs some cleanup
to automatically detect the available translations.
|
|
Commit b559d4846018c3adac362c6f1d0d697956586208 updated the
documentation to refer to apt.systemd.daily instead of the
apt cron job, introducing fuzzy strings in all the translations.
Gbp-Dch: ignore
|
|
|
|
|
|
Yes, we might still add new features to 1.3 or break some more
stuff. Stay tuned!
|
|
|
|
Now post-build script should no longer complain...
Gbp-Dch: ignore
|
|
All apt versions support numeric as well as 3-character timezones just
fine and its actually hard to write code which doesn't "accidently"
accepts it. So why change? Documenting the Date/Valid-Until fields in
the Release file is easy to do in terms of referencing the
datetime format used e.g. in the Debian changelogs (policy §4.4). This
format specifies only the numeric timezones through, not the nowadays
obsolete 3-character ones, so in the interest of least surprise we should
use the same format even through it carries a small risk of regression
in other clients (which encounter repositories created with
apt-ftparchive).
In case it is really regressing in practice, the hidden option
-o APT::FTPArchive::Release::NumericTimezone=0
can be used to go back to good old UTC as timezone.
The EDSP and EIPP protocols use this 'new' format, the text interface
used to communicate with the acquire methods does not for compatibility
reasons even if none of our methods would be effected and I doubt any
other would (in these instances the timezone is 'GMT' as that is what
HTTP/1.1 requires). Note that this is only true for apt talking to
methods, (libapt-based) methods talking to apt will respond with the
'new' format. It is therefore strongly adviced to support both also in
method input.
|
|
Debian isn't using 'update' anymore for years and the command is in
direct conflict with our goal of not requiring gnupg anymore, so it
is high time to officially declare this command as deprecated.
|
|
apt-key needs gnupg for most of its operations, but depending on it
isn't very efficient as apt-key is hardly used by users – and scripts
shouldn't use it to begin with as it is just a silly wrapper. To draw
more attention on the fact that e.g. 'apt-key add' should not be used in
favor of "just" dropping a keyring file into the trusted.gpg.d
directory this commit implements the display of warnings.
|
|
There is no real point in having two commands which roughly do the same
thing, especially if the difference is just in the display of the
fingerprint and hence security sensitive information.
Closes: 829232
|
|
Julian noticed on IRC that I fall victim to a lovely false friend by
calling referring to a 'planer' all the time even through these are
machines to e.g. remove splinters from woodwork ("make stuff plane").
The term I meant is written in german in this way (= with a single n)
but in english there are two, aka: 'planner'.
As that is unreleased code switching all instances without any
transitional provisions. Also the reason why its skipped in changelog.
Thanks: Julian Andres Klode
Gbp-Dch: Ignore
|
|
Freeing 'Install' for future use as an interface for "dpkg --install",
which is currently not used by any existent planer, so the
implementation of it itself will be delayed until then.
|
|
A rather special need option, but the internal planer supports this and
we have a testcase for it & sometimes it is hit (as a bug through). The
option itself mostly serves as a reminder for implementors that they
should be careful with removes and especially temporary removes if they
perform any.
|
|
APT has 3 modes: no immediate configuration, all packages are configured
immediately and its default mode of configuring essentials and
pseudo-essentials immediately only. While this seems like a job of
different planers at first, it might be handy to have it as an option,
too, in case a planer (like apts internal one) supports different modes
where the introduction of individual planers would be counter intuitive.
|
|
The very first step in introducing the "external installation planer
protocol" (short: EIPP) as part of my GSoC2016 project.
The description reads: APT-based tools like apt-get, aptitude, synaptic,
… work with the user to figure out how their system should look like
after they are done installing/removing packages and their dependencies.
The actual installation/removal of packages is done by dpkg with the
constrain that dependencies must be fulfilled at any point in time (e.g.
to run maintainer scripts).
Historically APT has a super micro-management approach to this task
which hasn't aged that well over the years mostly ignoring changes in
dpkg and growing into an unmaintainable mess hardly anyone can debug and
everyone fears to touch – especially as more and more requirements are
tacked onto it like handling cycles and triggers, dealing with
"important" packages first, package sources on removable media, touch
minimal groups to be able to interrupt the process if needed (e.g.
unattended-upgrades) which not only sky-rocket complexity but also can
be mutually exclusive as you e.g. can't have minimal groups and minimal
trigger executions at the same time.
|
|
Quite a huge churn of new strings.
|
|
Weak had no dedicated option before and Insecure and Downgrade were both
global options, which given the effect they all have on security is
rather bad. Setting them for individual repositories only isn't great
but at least slightly better and also more consistent with other
settings for repositories.
|
|
With this commit all APT-based clients default to refusing to work with
unsigned or otherwise insufficently secured repositories. In terms of
apt and apt-get this changes nothing, but it effects all tools using
libapt like aptitude, synaptic or packagekit.
The exception remains apt-get for stretch for now as this might break
too many scripts/usecases too quickly.
The documentation is updated and extended to reflect how to opt out or
in on this behaviour change.
Closes: 808367
|
|
There is a subtile difference between an empty setting and "DIRECT" in
the configuration as the later overrides the generic settings while the
earlier does not. Also, non-zero exitcodes should really be reported as
an error rather than silently discarded.
|
|
|
|
Most (if not all) solvers should be able to run perfectly fine without
root privileges as they get the entire state they are supposed to work
on via stdin and do not perform any action directly, but just pass
suggestions on via stdout.
The new default is to run them all as _apt hence, but each solver can
configure another user if it chooses/must. The security benefits are
minimal at best, but it helps preventing silly mistakes (see
35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good.
Note that our 'apt' and 'dump' solver already dropped privileges if they
had them.
|
|
libapt allows to configure compressors to be used by its system via
configuration implemented in 03bef78461c6f443187b60799402624326843396,
but that was never really documented and also only partly working, which
also explains why the tests weren't using it…
|
|
Reported-By: lintian: spelling-error-in-manpage
Git-Dch: Ignore
|
