summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2017-05-19Ubuntu release 1.3.81.3.8Julian Andres Klode
2017-05-05Ubuntu release 1.3.71.3.7Julian Andres Klode
2017-04-25Release 1.3.61.3.6Julian Andres Klode
2017-02-27Release 1.3.51.3.5Julian Andres Klode
2017-01-17Release 1.3.41.3.4Julian Andres Klode
2016-12-14Release 1.3.31.3.3Julian Andres Klode
2016-12-08Release 1.3.2 security update1.3.2Julian Andres Klode
2016-10-04Release 1.3.11.3.1Julian Andres Klode
2016-10-04Japanese manpages translation updatevictory
2016-09-20Release 1.31.3Julian Andres Klode
2016-09-02Release 1.3~rc41.3_rc4Julian Andres Klode
2016-08-30Release 1.3~rc31.3_rc3Julian Andres Klode
2016-08-29Switch documentation from httpredir.d.o to deb.d.oJulian Andres Klode
The CDN service deb.d.o is more reliable than the http redirector, so switch to it for our examples.
2016-08-26Accept --autoremove as alias for --auto-removeJulian Andres Klode
I probably missed that when I did the usability work. But better late than never.
2016-08-23CMake: Discover docbook stylesheet in other locationsJulian Andres Klode
Distributions seem to install this stuff all over the place, so let's add a common list of paths we know about.
2016-08-17Release 1.3~rc21.3_rc2Julian Andres Klode
2016-08-17add --with-source option and Packages/Sources supportDavid Kalnischkies
We support "./foobar.deb" as a way to install a deb file directly. Recently .changes files were added. This highlights a problem as you can't add the changes file without also trying to install all of them. Now, it could also be handy to add entire Packages/Sources files to perhaps get a bunch of packages in without installing them all implicitly. This commit introduces --with-source which allows to add *.deb, *.changes, *.dsc, source-dirs, Packages & Sources files (the later can also be compressed) without also installing them.
2016-08-11CMake: Exclude .md5 and .map doxygen files from installJulian Andres Klode
This is much better than removing them in debian/rules. Gbp-Dch: ignore
2016-08-11CMake: Mark Doxygen as required and use DOXYGEN_EXECUTABLEJulian Andres Klode
Seems like I missed that when adding doxygen support. Gbp-Dch: ignore
2016-08-11Release 1.3~rc11.3_rc1Julian Andres Klode
This commit looks heavy. Most of that comes from the fact that the ordering of files in the translations changed with the switch to CMake. I could have gone the extra mile to figure out the original ordering and replicate it, but I have chosen to re-order everything by file and line number, as that's easier.
2016-08-11doc/po: Adjust translations for programmatic typo fixJulian Andres Klode
This enhances commit b9e6db821a6ddbc5bf6a90c80c296d4e91283a63. Gbp-Dch: ignore
2016-08-11Merge branch 'feature/apt-dpkg-comm'David Kalnischkies
2016-08-10disable explicit configuration of all packages at the endDavid Kalnischkies
With b4450f1dd6bca537e60406b2383ab154a3e1485f we dropped what we calculated here later on and now that we don't need it in the meantime either we can just skip the busy work by default and expect dpkg to do the right thing dropping also our little "last explicit configures" removal trick introduced in b4450f1dd6bca537e60406b2383ab154a3e1485f. This enables the last of a bunch of previously experimental options, some of them existing still, but are very special and hence not really worth documenting anymore (especially as it would need to be rewritten now entirely) which is why the documentation is nearly completely dropped. The order of configuration stanzas in the simulation code changes slightly as it isn't concerning itself with finding the 'right' order, but any order is valid anyhow as long as the entire set happens in the same call.
2016-08-10fix programmatic typo in apt-key manpageDavid Kalnischkies
Reported-By: Johannes 'josch' Schauer on IRC Gbp-Dch: Ignore
2016-08-10select remove/purge packages early on for dpkgDavid Kalnischkies
Telling dpkg early on that we are going to remove these packages later helps it with auto-deconfiguration decisions and its another area where a planner can ignore the nitty gritty details and let dpkg decide the course of action if there are no special requirements.
2016-08-10Get rid of the old buildsystemJulian Andres Klode
Bye, bye, old friend.
2016-08-10CMake: Rewrite existing Documentation support and add doxygenJulian Andres Klode
This can now build all documentation. It should also be fairly reusable for other projects, as long as they follow the same naming scheme for the po4a output files and set the PACKAGE_* variables used here. We could have done all translations in a single call to po4a like the makefile based buildsystem does. While that would have made the output slightly nicer, this solution offers a huge performance gain because it can translate the documents in parallel, which also means that the xsltproc stage does not have to wait for all translations to be done first. You might think that the add_custom_command() should list the actual output files as BYPRODUCTS. This is not true however: Because the files are not always generated, Ninja will think missing byproducts mean that the target is out of date - which is not what we want. Finally, also add the missing doxygen support. Note that the packaging script cleans up some md5 and map files created by doxygen, otherwise it is fairly boring.
2016-08-06releasing package apt version 1.3~pre3+cmake21.3_pre3+cmake2Julian Andres Klode
2016-08-06releasing package apt version 1.3~pre3+cmake11.3_pre3+cmake1Julian Andres Klode
2016-08-06CMake: Add initial support for documentation buildingJulian Andres Klode
Build HTML docbook guides (untranslated) and manual pages (including translations). Also install the examples in the example subdirectory. Translation of docbook guides has not been implemented yet, but should be easy to do. The code also needs some cleanup to automatically detect the available translations.
2016-08-06doc: Fix fuzzy string regressionJulian Andres Klode
Commit b559d4846018c3adac362c6f1d0d697956586208 updated the documentation to refer to apt.systemd.daily instead of the apt cron job, introducing fuzzy strings in all the translations. Gbp-Dch: ignore
2016-08-05doc: update path to periodic options scriptJason Travis
2016-08-04Release 1.3~pre31.3_pre3Julian Andres Klode
2016-07-08Release 1.3~pre21.3_pre2Julian Andres Klode
Yes, we might still add new features to 1.3 or break some more stuff. Stay tuned!
2016-07-07Release 1.3~pre11.3_pre1Julian Andres Klode
2016-07-07apt-key.8: Put (deprecated) into the term tagJulian Andres Klode
Now post-build script should no longer complain... Gbp-Dch: ignore
2016-07-02use +0000 instead of UTC by default as timezone in outputDavid Kalnischkies
All apt versions support numeric as well as 3-character timezones just fine and its actually hard to write code which doesn't "accidently" accepts it. So why change? Documenting the Date/Valid-Until fields in the Release file is easy to do in terms of referencing the datetime format used e.g. in the Debian changelogs (policy §4.4). This format specifies only the numeric timezones through, not the nowadays obsolete 3-character ones, so in the interest of least surprise we should use the same format even through it carries a small risk of regression in other clients (which encounter repositories created with apt-ftparchive). In case it is really regressing in practice, the hidden option -o APT::FTPArchive::Release::NumericTimezone=0 can be used to go back to good old UTC as timezone. The EDSP and EIPP protocols use this 'new' format, the text interface used to communicate with the acquire methods does not for compatibility reasons even if none of our methods would be effected and I doubt any other would (in these instances the timezone is 'GMT' as that is what HTTP/1.1 requires). Note that this is only true for apt talking to methods, (libapt-based) methods talking to apt will respond with the 'new' format. It is therefore strongly adviced to support both also in method input.
2016-07-02deprecate 'apt-key update' and no-op it in DebianDavid Kalnischkies
Debian isn't using 'update' anymore for years and the command is in direct conflict with our goal of not requiring gnupg anymore, so it is high time to officially declare this command as deprecated.
2016-07-01warn if apt-key is used in scripts/its output parsedDavid Kalnischkies
apt-key needs gnupg for most of its operations, but depending on it isn't very efficient as apt-key is hardly used by users – and scripts shouldn't use it to begin with as it is just a silly wrapper. To draw more attention on the fact that e.g. 'apt-key add' should not be used in favor of "just" dropping a keyring file into the trusted.gpg.d directory this commit implements the display of warnings.
2016-07-01alias apt-key list to fingerDavid Kalnischkies
There is no real point in having two commands which roughly do the same thing, especially if the difference is just in the display of the fingerprint and hence security sensitive information. Closes: 829232
2016-06-29eipp: let apt make a plan, not make stuff planeDavid Kalnischkies
Julian noticed on IRC that I fall victim to a lovely false friend by calling referring to a 'planer' all the time even through these are machines to e.g. remove splinters from woodwork ("make stuff plane"). The term I meant is written in german in this way (= with a single n) but in english there are two, aka: 'planner'. As that is unreleased code switching all instances without any transitional provisions. Also the reason why its skipped in changelog. Thanks: Julian Andres Klode Gbp-Dch: Ignore
2016-06-27eipp: rename stanza 'Install' to 'Unpack'David Kalnischkies
Freeing 'Install' for future use as an interface for "dpkg --install", which is currently not used by any existent planer, so the implementation of it itself will be delayed until then.
2016-06-27eipp: add Allow-Temporary-Remove-of-EssentialsDavid Kalnischkies
A rather special need option, but the internal planer supports this and we have a testcase for it & sometimes it is hit (as a bug through). The option itself mostly serves as a reminder for implementors that they should be careful with removes and especially temporary removes if they perform any.
2016-06-27eipp: implement Immediate-Configuration flagDavid Kalnischkies
APT has 3 modes: no immediate configuration, all packages are configured immediately and its default mode of configuring essentials and pseudo-essentials immediately only. While this seems like a job of different planers at first, it might be handy to have it as an option, too, in case a planer (like apts internal one) supports different modes where the introduction of individual planers would be counter intuitive.
2016-06-27eipp: implement version 0.1 of the protocolDavid Kalnischkies
The very first step in introducing the "external installation planer protocol" (short: EIPP) as part of my GSoC2016 project. The description reads: APT-based tools like apt-get, aptitude, synaptic, … work with the user to figure out how their system should look like after they are done installing/removing packages and their dependencies. The actual installation/removal of packages is done by dpkg with the constrain that dependencies must be fulfilled at any point in time (e.g. to run maintainer scripts). Historically APT has a super micro-management approach to this task which hasn't aged that well over the years mostly ignoring changes in dpkg and growing into an unmaintainable mess hardly anyone can debug and everyone fears to touch – especially as more and more requirements are tacked onto it like handling cycles and triggers, dealing with "important" packages first, package sources on removable media, touch minimal groups to be able to interrupt the process if needed (e.g. unattended-upgrades) which not only sky-rocket complexity but also can be mutually exclusive as you e.g. can't have minimal groups and minimal trigger executions at the same time.
2016-06-22Release 1.3~exp31.3_exp3Julian Andres Klode
Quite a huge churn of new strings.
2016-06-22add insecure (and weak) allow-options for sources.listDavid Kalnischkies
Weak had no dedicated option before and Insecure and Downgrade were both global options, which given the effect they all have on security is rather bad. Setting them for individual repositories only isn't great but at least slightly better and also more consistent with other settings for repositories.
2016-06-22forbid insecure repositories by default expect in apt-getDavid Kalnischkies
With this commit all APT-based clients default to refusing to work with unsigned or otherwise insufficently secured repositories. In terms of apt and apt-get this changes nothing, but it effects all tools using libapt like aptitude, synaptic or packagekit. The exception remains apt-get for stretch for now as this might break too many scripts/usecases too quickly. The documentation is updated and extended to reflect how to opt out or in on this behaviour change. Closes: 808367
2016-06-20implement and document DIRECT for auto-detect-proxyDavid Kalnischkies
There is a subtile difference between an empty setting and "DIRECT" in the configuration as the later overrides the generic settings while the earlier does not. Also, non-zero exitcodes should really be reported as an error rather than silently discarded.
2016-06-11Release 1.3~exp21.3_exp2Julian Andres Klode