| Age | Commit message (Collapse) | Author |
|---|
|
It is kinda unlikely that apt will ever encounter a certificate for an
IP and a user actually using it, but the API documentation for
gnutls_server_name_set explicitly says that "IPv4 or IPv6 addresses are
not permitted to be set by this function.", so we should follow it.
[jak@d.o: Slightly rebased]
|
|
This makes more sense. If the handshake failed midway, we still
should run the gnutls bye stuff. The thinking here is to only
set the fd after the session setup, as we do not modify it
before, so if it fails in session setup, you retain a usable
file descriptor.
Gbp-Dch: ignore
|
|
This probably makes more sense if Verify-Peer is set to off.
|
|
This should make it easier to figure out what was
going on.
|
|
We can actually just pass null as a hostname, so let's just
do that when Verify-Host is set to false.
|
|
Silently ignoring the options might be a security issue,
so produce an error instead.
|
|
If gnutls_session_bye() exited with an error, we never closed
the underlying file descriptor, causing the method to think the
connection was still open. This caused problems especially in
test-partial-file-support where we checked that a "complete"
file and an incomplete file work. The first GET returns a 416
with Connection: close, and the next GET request then accidentally
reads the body of the 416 as the header for its own request.
|
|
This is especially needed if we use an HTTPS proxy to CONNECT
to an HTTPS URI, as we run TLS-inside-TLS then.
|
|
When APT was trying multiple addresses, any later error
somewhere else would be reported with ConnectionRefused
or ConnectionTimedOut as the FailReason because that
was set by early connect attempts. This causes APT to
handle the failures differently, leading to some weirdly
breaking test cases (like the changed one).
Add debugging to the previously failing test case so
we can find out when something goes wrong there again.
|
|
This fixes a regression from ~alpha2.
Closes: #866559
Gbp-Dch: Full
|
|
It turns out that curl only sets the system trust store if
the CaInfo option is not set, so let's do the same here.
|
|
Tell the user to install ca-certificates.
Closes: #866377
|
|
An SRV record includes a portnumber to use with the host given, but apt
was ignoring the portnumber and instead used either the port given by
the user for the initial host or the default port for the service.
In practice the service usually runs on another host on the default
port, so it tends to work as intended and even if not and apt can't get
a connection there it will gracefully fallback to contacting the initial
host with the right port, so its a user invisible bug most of the time.
|
|
As requested by Henrique de Moraes Holschuh, here comes
an option to disable TLS support. If the option is set
to false, the internal TLS layer is disabled.
|
|
GnuTLS can already have data pending in its buffers, we need
to to drain that first otherwise select() might block
indefinitely.
Gbp-Dch: ignore
|
|
The http method will eventually replace the curl-based
https method, but for now, this is an opt-in experiment
that can be enabled by setting Dir::Bin::Methods::https
to "http".
Known issues:
- We do not support HTTPS proxies yet
- We do not support proxying HTTPS connections yet (CONNECT)
- IssuerCert and SslForceVersion are unsupported
Gbp-Dch: Full
|
|
Use std::unique_ptr<MethodFd> everywhere we used an
integer-based file descriptor before. This allows us
to implement stuff like TLS support easily.
Gbp-Dch: ignore
|
|
This will allow us to access ConfigFind() and stuff which makes
it possible for us to implement TLS support.
Gbp-Dch: ignore
|
|
Commit 3af3ac2f5ec007badeded46a94be2bd06b9917a2 (released in 1.3~pre1)
implements proper fallback for SRV, but that works actually too good
as the RFC defines that such an SRV record should indicate that the
server doesn't provide this service and apt should respect this.
The solution is hence to fail again as requested even if that isn't what
the user (and perhaps even the server admins) wanted. At least we will
print a message now explicitly mentioning SRV to point people in the
right direction.
Reported-In: https://bugs.kali.org/view.php?id=3525
Reported-By: Raphaël Hertzog
|
|
Gbp-Dch: ignore
|
|
Doing a direct connect to an .onion address (if you don't happen to use
it as a local domain, which you shouldn't) is bound to fail and does
leak the information that you do use Tor and which hidden service you
wanted to connect to to a DNS server. Worse, if the DNS is poisoned and
actually resolves tricking a user into believing the setup would work
correctly…
This does block also the usage of wrappers like torsocks with apt, but
with native support available and advertised in the error message this
shouldn't really be an issue.
Inspired-by: https://bugzilla.mozilla.org/show_bug.cgi?id=1228457
|
|
Instead of only trying the first host we get via SRV, we try them all as
we are supposed to and if that isn't working we try to connect to the
host itself as if we hadn't seen any SRV records. This was already the
intend of the old code, but it failed to hide earlier problems for the
next call, which would unconditionally fail then resulting in an all
around failure to connect. With proper stacking we can also keep the
error messages of each call around (and in the order tried) so if the
entire connection fails we can report all the things we have tried while
we discard the entire stack if something works out in the end.
|
|
The PopFromSrvRecs() already removed the entry from the active
list, so the extra SrvRecords.erase() was incorrect.
Git-Dch: ignore
|
|
AI_IDN is a glibc extension, but we can worry about this at the time
actually anyone is seriously trying apt on non-glibc systems.
Closes: 763437
|
|
This flags is generally handy to avoid having to deal with ipv6 results on an
ipv4-only system, but it prevents e.g. the testcases from working if the
testsystem has no configured address at the moment (expect loopback), so
allow it to be sidestepped and let the testcases sidestep it.
Git-Dch: Ignore
|
|
Reported-By: gcc
Git-Dch: Ignore
|
|
Thanks: Julian Andres Klode
Git-Dch: ignore
|
|
Also add "Debug::Acquire::SrvRecs" debug option and the option
"Acquire::EnableSrvRecods" to allow disabling this lookup.
|
|
|
|
|
|
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
The most "visible" change is from utime to utimensat/futimens
as the first one isn't part of POSIX anymore.
Reported-By: cppcheck
Git-Dch: Ignore
|
|
- use Errno() instead of strerror(), thanks to David Kalnischk
|
|
"Acquire::ForceIPv6" to allow focing one or the other
(closes: #611891)
|
|
|
|
|
|
|
|
|
|
|
|
https://wiki.ubuntu.com/NetworklessInstallationFixes (LP: #556831).
|
|
* merged from the lp:~mvo/apt/history branch
* Fix apt-ftparchive(1) wrt description of the "-o" option.
Thanks to Dann Frazier for the patch. Closes: #273100
* po/LINGUAS. Re-disable Hebrew. Closes: #534992
* po/LINGUAS. Enable Asturian and Lithuanian
* Fix typo in apt-cache.8.xml: nessasarily
* Fix "with with" in apt-get.8.xml
* Fix some of the typos mentioned by the german team
Closes: #479997
* Polish translation update by Wiktor Wandachowicz
Closes: #548571
* German translation update by Holger Wansing
Closes: #551534
* Italian translation update by Milo Casagrande
Closes: #555797
* Simplified Chinese translation update by Aron Xu
Closes: #558737
* Slovak translation update by Ivan Masár
Closes: #559277
* apt-pkg/packagemanager.cc:
- add output about pre-depends configuring when debug::pkgPackageManager
is used
* methods/https.cc:
- fix incorrect use of CURLOPT_TIMEOUT, closes: #497983, LP: #354972
thanks to Brian Thomason for the patch
* merge lp:~mvo/apt/netrc branch, this adds support for a
/etc/apt/auth.conf that can be used to store username/passwords
in a "netrc" style file (with the extension that it supports "/"
in a machine definition). Based on the maemo git branch (Closes: #518473)
(thanks also to Jussi Hakala and Julian Andres Klode)
* apt-pkg/deb/dpkgpm.cc:
- add "purge" to list of known actions
* apt-pkg/init.h:
- add compatibility with old ABI name until the next ABI break
* merge segfault fix from Mario Sanchez Prada, many thanks
(closes: #561109)
* apt-pkg/depcache.cc, apt-pkg/indexcopy.cc:
- typo fix (LP: #462328)
* cmdline/apt-key:
- Emit a warning if removed keys keyring is missing and skip associated
checks (LP: #218971)
* apt-pkg/packagemanager.cc:
- better debug output for ImmediateAdd with depth and why
- improve the message shown for failing immediate configuration
* doc/guide.it.sgml: moved to doc/it/guide.it.sgml
* doc/po4a.conf: activate translation of guide.sgml and offline.sgml
* doc/apt.conf.5.xml:
- provide a few more details about APT::Immediate-Configure
- briefly document the behaviour of the new https options
* doc/sources.list.5.xml:
- add note about additional apt-transport-methods
* doc/apt-mark.8.xml:
- correct showauto synopsis, thanks Andrew Schulman (Closes: #551440)
* cmdline/apt-get.cc:
- source should display his final pkg pick (Closes: #249383, #550952)
- source doesn't need the complete version for match (Closes: #245250)
- source ignores versions/releases if not available (Closes: #377424)
- only warn if (free) space overflows (Closes: #522238)
- add --debian-only as alias for --diff-only
* methods/connect.cc:
- display also strerror of "wicked" getaddrinfo errors
- add AI_ADDRCONFIG to ai_flags as suggested by Aurelien Jarno
in response to Bernhard R. Link, thanks! (Closes: #505020)
* buildlib/configure.mak, buildlib/config.{sub,guess}:
- remove (outdated) config.{sub,guess} and use the ones provided
by the new added build-dependency autotools-dev instead
* configure.in, buildlib/{xml,yodl,sgml}_manpage.mak:
- remove the now obsolete manpage buildsystems
* doc/{pl,pt_BR,es,it}/*.{sgml,xml}:
- convert all remaining translation to the po4a system
* debian/control:
- drop build-dependency on docbook-utils and xmlto
- add build-dependency on autotools-dev
- bump policy to 3.8.3 as we have no outdated manpages anymore
* debian/NEWS:
- fix a typo in 0.7.24: Allready -> Already (Closes: #557674)
* ftparchive/writer.{cc,h}:
- add APT::FTPArchive::LongDescription to be able to disable them
* apt-pkg/deb/debsrcrecords.cc:
- use "diff" filetype for .debian.tar.* files (Closes: #554898)
* methods/rred.cc:
- rewrite to be able to handle even big patch files
- adopt optional mmap+iovec patch from Morten Hustveit
(Closes: #463354) which should speed up a bit. Thanks!
* methods/http{,s}.cc
- add config setting for User-Agent to the Acquire group,
thanks Timothy J. Miller! (Closes: #355782)
- add https options which default to http ones (Closes: #557085)
* debian/apt.cron.daily:
- check cache size even if we do nothing else otherwise, thanks
Francesco Poli for patch(s) and patience! (Closes: #459344)
* ftparchive/*:
- fix a few typos in strings, comments and manpage,
thanks Karl Goetz! (Closes: #558757)
* cmdline/apt-mark:
- print an error if a new state file can't be created
(Closes: #521289) and
- exit nicely if python-apt is not installed (Closes: #521284)
* doc/de: German translation of manpages (Closes: #552606)
* doc/ various manpages:
- correct various errors, typos and oddities (Closes: #552535)
* doc/apt-secure.8.xml:
- replace literal with emphasis tags in Archive configuration
* doc/apt-ftparchive.1.xml:
- remove informalexample tag which hides the programlisting
* doc/apt-get.8.xml:
- change equivalent "for" to "to the" (purge command)
- clarify --fix-broken sentence about specifying packages
* apt-pkg/contib/strutl.h
- Avoid extra inner copy in APT_MKSTRCMP and APT_MKSTRCMP2.
* build infrastructure:
- Bumped libapt version, excluded eglibc from SONAME. (Closes: #448249)
* doc/apt.conf.5.xml:
- Deprecate unquoted values, string concatenation and explain what should
not be written inside a value (quotes,backslash).
- Restrict option names to alphanumerical characters and "/-:._+".
- Deprecate #include, we have apt.conf.d nowadays which should be
sufficient.
* ftparchive/apt-ftparchive.cc:
- Call setlocale() so translations are actually used.
* debian/apt.conf.autoremove:
- Add kfreebsd-image-* to the list (Closes: #558803)
|
|
in his response to Bernhard R. Link's patch, thanks! (Closes: #505020)
|
|
- display also strerror of "wicked" getaddrinfo errors
|
|
|
|
- remember hosts with Resolve failures or connect Timeouts
see https://wiki.ubuntu.com/NetworklessInstallationFixes
|
|
- remember hosts with Resolve failures or connect Timeouts
|
|
- consider a ResolveError a transient-network problem
|
|
|
|
|
