| Age | Commit message (Collapse) | Author |
|---|
|
These are a few overlooked syscalls. Also add readv(), writev(),
renameat2(), and statx() in case libc uses them.
Gbp-Dch: ignore
|
|
This reduces the number of syscalls to about 140 from about
350 or so, significantly reducing security risks.
Also change prepare-release to ignore the architecture lists
in the build dependencies when generating the build-depends
package for travis.
We might want to clean up things a bit more and/or move it
somewhere else.
|
|
This was a left over from the autodetect move.
Gbp-Dch: ignore
|
|
Sandboxing was turned off because we called pkgAcqMethod's
Configuration() instead of aptMethod's.
|
|
This avoids running the Proxy-Auto-Detect script inside the
untrusted (well, less trusted for now) sandbox. This will allow
us to restrict the http method from fork()ing or exec()ing via
seccomp.
|
|
APT connects just fine to any .onion address given, only if the connect
fails somehow it will perform checks on the sanity of which in this case
is checking the length as they are well defined and as the strings are
arbitrary a user typing them easily mistypes which apt should can be
slightly more helpful in figuring out by saying the onion hasn't the
required length.
|
|
This automatically removes any old apt-transport-https, as
apt now Breaks it unversioned.
|
|
Opening the file before we drop privileges in the methods allows us to
avoid chowning in the acquire main process which can apply to the wrong
file (imagine Binary scoped settings) and surprises users as their
permission setup is overridden.
There are no security benefits as the file is open, so an evil method
could as before read the contents of the file, but it isn't worse than
before and we avoid permission problems in this setup.
|
|
On HTTP Connect we since recently look into the auth.conf file for login
information, so we should really look for all proxies into the file as
the argument is the same as for sources entries and it is easier to
document (especially as the manpage already mentions it as supported).
|
|
We have support for an netrc-like auth.conf file since 0.7.25 (closing
518473), but it was never documented in apt that it even exists and
netrc seems to have fallen out of usage as a manpage for it no longer
exists making the feature even more arcane.
On top of that the code was a bit of a mess (as it is written in c-style)
and as a result the matching of machine tokens to URIs also a bit
strange by checking for less specific matches (= without path) first.
We now do a single pass over the stanzas.
In practice early adopters of the undocumented implementation will not
really notice the differences and the 'new' behaviour is simpler to
document and more usual for an apt user.
Closes: #811181
|
|
Failing on too much data is good, but we can do better by checking for
exact filesizes as we know with hashsums how large a file should be, so
if we get a file which has a size we do not expect we can drop it
directly, regardless of if the file is larger or smaller than what we
expect which should catch most cases which would end up as hashsum
errors later now a lot sooner.
|
|
We tend to operate on rather large static files, which means we usually
get Content-Length information from the server. If we combine this
information with the filesize we are expecting (factoring in pipelining)
we can avoid reading a bunch of data we are ending up rejecting anyhow
by just closing the connection saving bandwidth and time both for the
server as well as the client.
|
|
It is highly unlikely to encounter fields which start with HTTP in
practice, but we should really be a bit more restrictive here.
|
|
This makes it easier to see which headers includes what.
The changes were done by running
git grep -l '#\s*include' \
| grep -E '.(cc|h)$' \
| xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/'
To modify all include lines by adding a space, and then running
./git-clang-format.sh.
|
|
|
|
That's just ridiculous these days.
Gbp-Dch: ignore
|
|
It is kinda unlikely that apt will ever encounter a certificate for an
IP and a user actually using it, but the API documentation for
gnutls_server_name_set explicitly says that "IPv4 or IPv6 addresses are
not permitted to be set by this function.", so we should follow it.
[jak@d.o: Slightly rebased]
|
|
This makes more sense. If the handshake failed midway, we still
should run the gnutls bye stuff. The thinking here is to only
set the fd after the session setup, as we do not modify it
before, so if it fails in session setup, you retain a usable
file descriptor.
Gbp-Dch: ignore
|
|
This probably makes more sense if Verify-Peer is set to off.
|
|
This should make it easier to figure out what was
going on.
|
|
APT considered any response with a Content-Length to have a
body, even if the value of the header was 0. A 0 length body
however, is equal to no body.
|
|
We can actually just pass null as a hostname, so let's just
do that when Verify-Host is set to false.
|
|
Silently ignoring the options might be a security issue,
so produce an error instead.
|
|
If gnutls_session_bye() exited with an error, we never closed
the underlying file descriptor, causing the method to think the
connection was still open. This caused problems especially in
test-partial-file-support where we checked that a "complete"
file and an incomplete file work. The first GET returns a 416
with Connection: close, and the next GET request then accidentally
reads the body of the 416 as the header for its own request.
|
|
The old curl based method is still available as 'curl',
'curl+http', and 'curl+https'.
|
|
HTTPS proxies just require unwrapping the TLS layer at the proxy
connection, that's easy, and of course sending proxy-specific
headers that are sent on "http" proxies.
|
|
Proxying HTTPS traffic requires the proxy providing the
CONNECT method. This implements the client side of it,
although it is a bit hacky.
HTTP connect is a normal HTTP CONNECT request, followed
by a normal HTTP response, just that the body of the
response is the TCP stream of the target host.
We use a special wrapper in case there are data bytes
in the header packets - in that case, the bytes are
stored in a buffer and the buffer will be drained first,
afterwards the connection continues directly with the
TCP stream (with one more vcall).
Also: Do not send full URI to https destinations when proxying,
as we are directly interfacing with the destination data stream.
|
|
This is especially needed if we use an HTTPS proxy to CONNECT
to an HTTPS URI, as we run TLS-inside-TLS then.
|
|
When APT was trying multiple addresses, any later error
somewhere else would be reported with ConnectionRefused
or ConnectionTimedOut as the FailReason because that
was set by early connect attempts. This causes APT to
handle the failures differently, leading to some weirdly
breaking test cases (like the changed one).
Add debugging to the previously failing test case so
we can find out when something goes wrong there again.
|
|
This fixes a regression from ~alpha2.
Closes: #866559
Gbp-Dch: Full
|
|
It turns out that curl only sets the system trust store if
the CaInfo option is not set, so let's do the same here.
|
|
Tell the user to install ca-certificates.
Closes: #866377
|
|
An SRV record includes a portnumber to use with the host given, but apt
was ignoring the portnumber and instead used either the port given by
the user for the initial host or the default port for the service.
In practice the service usually runs on another host on the default
port, so it tends to work as intended and even if not and apt can't get
a connection there it will gracefully fallback to contacting the initial
host with the right port, so its a user invisible bug most of the time.
|
|
The apt-transport-tor package operates via simple symlinks which can
result in 'http' being called as 'tor+https', so it must pick up the
right configuration pieces and trigger https support also in plus names.
|
|
As requested by Henrique de Moraes Holschuh, here comes
an option to disable TLS support. If the option is set
to false, the internal TLS layer is disabled.
|
|
Gbp-Dch: ignore
|
|
GnuTLS can already have data pending in its buffers, we need
to to drain that first otherwise select() might block
indefinitely.
Gbp-Dch: ignore
|
|
This makes testing easier and prepares us for the
transition.
|
|
The http method will eventually replace the curl-based
https method, but for now, this is an opt-in experiment
that can be enabled by setting Dir::Bin::Methods::https
to "http".
Known issues:
- We do not support HTTPS proxies yet
- We do not support proxying HTTPS connections yet (CONNECT)
- IssuerCert and SslForceVersion are unsupported
Gbp-Dch: Full
|
|
Use std::unique_ptr<MethodFd> everywhere we used an
integer-based file descriptor before. This allows us
to implement stuff like TLS support easily.
Gbp-Dch: ignore
|
|
This will allow us to access ConfigFind() and stuff which makes
it possible for us to implement TLS support.
Gbp-Dch: ignore
|
|
An unknown code should be handled the same as the x00 code of this
group, but for redirections we used to treat 300 (and a few others)
as an error while unknown codes were considered redirections.
Instead we check now explicitly for the redirection codes we support for
redirecting (and add the 308 defined in RFC 7538) to avoid future
problems if new 3xx codes are added expecting certain behaviours.
Potentially strange would have been e.g. "305 Use Proxy" sending a
Location for the proxy to use – which wouldn't have worked and resulted
in an error anyhow, but probably confused users in the process.
|
|
|
|
Reported-By: gcc-7
Gbp-Dch: Ignore
|
|
This fixes issues with sourceforge where the redirector includes
such a Content-Range in a 302 redirect. Since we do not really know
what file is meant in a redirect, let's just ignore it for all
responses other than 416 and 206.
Maybe we should also get rid of the other errors, and just ignore
the field in those cases as well?
LP: #1657567
|
|
Most of them in (old) code comments. The two instances of user visible
string changes the po files of the manpages are fixed up as well.
Gbp-Dch: Ignore
Reported-By: spellintian
|
|
rred can fail for a plentory of reasons, but its failure is usually
recoverable (Ign lines) so it shouldn't leak unrequested debug messages
to an observing user.
Closes: #850759
|
|
Curl requires URLs to be urlencoded. We are however giving it
undecoded URLs. This causes it go completely nuts if there is
a space in the URI, producing requests like:
GET /a file HTTP/1.1
which the servers then interpret as a GET request for "/a" with
HTTP version "file" or some other non-sense.
This works around the issue by encoding the path component of
the URL. I'm not sure if we should encode other parts of the URL
as well, this one seems to do the trick for the actual issue at
hand.
A more correct fix is to avoid the dequoting and (re-)quoting
of URLs when a redirect occurs / a new request is sent. That's
been on the radar for probably a year or two now, but nobody
bothered implementing that yet.
LP: #1651923
|
|
This 'method' is the abstract base for http and https and should as such
be called out like this rather using an easily confused name.
Gbp-Dch: Ignore
|
|
Having a Reset(bool) method to partially reset certain variables like
the download size always were strange, so this commit splits the
ServerState into an additional RequestState living on the stack for as
long as we deal with this request causing an automatic "reset".
There is much to do still to make this code look better, but this is a
good first step which compiles cleanly and passes all tests, so keeping
it as history might be beneficial and due to avoiding explicit memory
allocations it ends up fixing a small memory leak in https, too.
Closes: #440057
|
