summaryrefslogtreecommitdiff
path: root/test/integration/framework
AgeCommit message (Collapse)Author
2016-08-26test: Fix invalid quoting in variable expansionJulian Andres Klode
This breaks the tests with FreeBSD's shell, and is not needed - it works fine without it. Gbp-Dch: ignore
2016-08-26test: Use printf "%b\n" instead of echo for strings with '\'Julian Andres Klode
Use of echo with special characters is not portable. On a normal POSIX system, the behavior with backslash escaped strings is implementation-defined. On an XSI-conformant system, they must be interpreted. A way out is the printf command - printf "%b" specifies that the following argument is to be printed with backslash escapes interpreted. Gbp-Dch: ignore
2016-08-26test: Make sure we always find a dpkg in status fileJulian Andres Klode
Especially on non-Debian platforms, dpkg might not list itself on the host system, and thus dpkg --assert-multi-arch fails. Gbp-Dch: ignore
2016-08-26test: Explicitly pass --admindir=var/lib/dpkg to dpkgJulian Andres Klode
Our test suite assumes that dpkg's admindir is var/lib/dpkg. This might not always be true; for example, on FreeBSD, it is located at /var/db/dpkg. Gbp-Dch: ignore
2016-08-26test: Fix building of noopchrootJulian Andres Klode
Gbp-Dch: ignore
2016-08-26test: Get rid of debhelper rules.tiny example depJulian Andres Klode
Gbp-Dch: ignore
2016-08-26test: Allow stunnel to be used instead of stunnel4Julian Andres Klode
This is needed for Fedora and FreeBSD. Gbp-Dch: ignore
2016-08-26test: Substitute GNU commands for other commands where availableJulian Andres Klode
We are simply checking for gnuCMD and gCMD for each command we are interested in. Gbp-Dch: ignore
2016-08-26test: Use C locale instead of C.UTF-8Julian Andres Klode
Gbp-Dch: ignore
2016-08-26Make directory paths configurableJulian Andres Klode
This allows other vendors to use different paths, or to build your own APT in /opt for testing. Note that this uses + 1 in some places, as the paths we receive are absolute, but we need to strip of the initial /.
2016-08-17add the gpg-classic variant to the gpgv/gnupg or-groupDavid Kalnischkies
We need to support partial upgrades anyhow, so we have to deal with the different versions and your tests try to ensure that we do, so we shouldn't make any explicit higher requirements.
2016-08-17tests: set source directory for gdbDavid Kalnischkies
Helps interactive gdb calls find the source code. Gbp-Dch: Ignore
2016-08-11tests: copy 01autoremove from the right placeDavid Kalnischkies
With cmake using BUILDDIRECTORY at this place is not only as wrong as it was before, but it might not even work always copying the system provided one which might or might not be current and hence fails tests needing it to be current like ./test-apt-move-and-forget-manual-sections We don't want to always use the one from the source directory through either like in autopkgtests. Gbp-Dch: Ignore
2016-08-10test: Automatically discover CMake build directoryJulian Andres Klode
Look at the project root, and all directories directly below it and pick the directory with the newest CMakeCache.txt file. Gbp-Dch: ignore
2016-08-06CMake: Switch integration tests and travis overJulian Andres Klode
This early support seems a bit hacky, but it's a hard switch: The integration tests do not understand the old build system anymore afterwards. I don't really like that.
2016-07-22use a configurable location for apport report storageDavid Kalnischkies
Hardcoding /var/crash means we can't test it properly and it isn't really our style.
2016-07-22clean up default-stanzas from extended_states on writeDavid Kalnischkies
The existing cleanup was happening only for packages which had a status change (install -> uninstalled) which is the most frequent but no the only case – you can e.g. set autobits explicitly with apt-mark. This would leave stanzas in the states file declaring a package to be manually installed – which is the default value for a package not listed at all, so we can just as well drop it from the file.
2016-07-22tests: skip over -flags for first option in autotestsDavid Kalnischkies
Otherwise calls like "apt -q install" end up calling "aptautotest_apt_q" instead of "aptautotest_apt_install" Gbp-Dch: Ignore
2016-07-19don't hardcode /var/lib/dpkg/status as dir::state::statusDavid Kalnischkies
Theoretically it should be enough to change the Dir setting and have apt pick the dpkg/status file from that. Also, it should be consistently effected by RootDir. Both wasn't really the case through, so a user had to explicitly set it too (or ignore it and have or not have expected sideeffects caused by it). This commit tries to guess better the location of the dpkg/status file by setting dir::state::status to a naive "../dpkg/status", just that this setting would be interpreted as relative to the CWD and not relative to the dir::state directory. Also, the status file isn't really relative to the state files apt has in /var/lib/apt/ as evident if we consider that apt/ could be a symlink to someplace else and "../dpkg" not effected by it, so what we do here is an explicit replace on apt/ – similar to how we create directories if it ends in apt/ – with dpkg/. As this is a change it has the potential to cause regressions in so far as the dpkg/status file of the "host" system is no longer used if you set a "chroot" system via the Dir setting – but that tends to be intended and causes people to painfully figure out that they had to set this explicitly before, so that it now works more in terms of how the other Dir settings work (aka "as expected"). If using the host status file is really intended it is in fact easier to set this explicitely compared to setting the new "magic" location explicitely.
2016-07-15tests: activate dpkg multi-arch even if test is single archDavid Kalnischkies
Most tests are either multiarch, do not care for the specific architecture or do not interact with dpkg, so really effect by this is only test-external-installation-planner-protocol, but its a general issue that while APT can be told to treat any architecture as native dpkg has the native architecture hardcoded so if we run tests we must make sure that dpkg knows about the architecture we will treat as "native" in apt as otherwise dpkg will refuse to install packages from such an architecture. This reverts f883d2c3675eae2700e4cd1532c1a236cae69a4e as it complicates the test slightly for no practical gain after the generic fix.
2016-07-08tests: fix external solver/planner directory setupDavid Kalnischkies
The setup didn't prepare the directories as expected by newer version of tthe external tests in an autopkgtests environment.
2016-07-06don't change owner/perms/times through file:// symlinksDavid Kalnischkies
If we have files in partial/ from a previous invocation or similar such those could be symlinks created by file:// sources. The code is expecting only real files through and happily changes owner, modification times and permission on the file the symlink points to which tend to be files we have no business in touching in this way. Permissions of symlinks shouldn't be changed, changing owner is usually pointless to, but just to be sure we pick the easy way out and use lchown, check for symlinks before chmod/utimes. Reported-By: Mattia Rizzolo on IRC
2016-07-05tests: allow setting environment in extra fileDavid Kalnischkies
It can be handy to set apt options for the testcases which shouldn't be accidentally committed like external planner testing or workarounds for local setups. Gbp-Dch: Ignore
2016-07-02use +0000 instead of UTC by default as timezone in outputDavid Kalnischkies
All apt versions support numeric as well as 3-character timezones just fine and its actually hard to write code which doesn't "accidently" accepts it. So why change? Documenting the Date/Valid-Until fields in the Release file is easy to do in terms of referencing the datetime format used e.g. in the Debian changelogs (policy §4.4). This format specifies only the numeric timezones through, not the nowadays obsolete 3-character ones, so in the interest of least surprise we should use the same format even through it carries a small risk of regression in other clients (which encounter repositories created with apt-ftparchive). In case it is really regressing in practice, the hidden option -o APT::FTPArchive::Release::NumericTimezone=0 can be used to go back to good old UTC as timezone. The EDSP and EIPP protocols use this 'new' format, the text interface used to communicate with the acquire methods does not for compatibility reasons even if none of our methods would be effected and I doubt any other would (in these instances the timezone is 'GMT' as that is what HTTP/1.1 requires). Note that this is only true for apt talking to methods, (libapt-based) methods talking to apt will respond with the 'new' format. It is therefore strongly adviced to support both also in method input.
2016-07-01warn if apt-key is used in scripts/its output parsedDavid Kalnischkies
apt-key needs gnupg for most of its operations, but depending on it isn't very efficient as apt-key is hardly used by users – and scripts shouldn't use it to begin with as it is just a silly wrapper. To draw more attention on the fact that e.g. 'apt-key add' should not be used in favor of "just" dropping a keyring file into the trusted.gpg.d directory this commit implements the display of warnings.
2016-06-30tests: deduplicate package creation framework codeDavid Kalnischkies
Gbp-Dch: Ignore
2016-06-29eipp: let apt make a plan, not make stuff planeDavid Kalnischkies
Julian noticed on IRC that I fall victim to a lovely false friend by calling referring to a 'planer' all the time even through these are machines to e.g. remove splinters from woodwork ("make stuff plane"). The term I meant is written in german in this way (= with a single n) but in english there are two, aka: 'planner'. As that is unreleased code switching all instances without any transitional provisions. Also the reason why its skipped in changelog. Thanks: Julian Andres Klode Gbp-Dch: Ignore
2016-06-27eipp: enable xz-compressed scenario loggingDavid Kalnischkies
In 385d9f2f23057bc5808b5e013e77ba16d1c94da4 I implemented the storage of scenario files based on enabling this by default for EIPP, but I implemented it first optionally for EDSP to have it independent. The reasons mentioned in the earlier commit (debugging and bugreports) obviously apply here, especially as EIPP solutions aren't user approved, nearly impossible to verify before starting the execution and at the time of error the scenario has changed already, so that reproducing the issue becomes hard(er).
2016-06-27eipp: provide the internal planer as an external oneDavid Kalnischkies
Testing the current implementation can benefit from being able to be feed an EIPP request and produce a fully compliant response. It is also a great test for EIPP in general.
2016-06-27eipp: implement version 0.1 of the protocolDavid Kalnischkies
The very first step in introducing the "external installation planer protocol" (short: EIPP) as part of my GSoC2016 project. The description reads: APT-based tools like apt-get, aptitude, synaptic, … work with the user to figure out how their system should look like after they are done installing/removing packages and their dependencies. The actual installation/removal of packages is done by dpkg with the constrain that dependencies must be fulfilled at any point in time (e.g. to run maintainer scripts). Historically APT has a super micro-management approach to this task which hasn't aged that well over the years mostly ignoring changes in dpkg and growing into an unmaintainable mess hardly anyone can debug and everyone fears to touch – especially as more and more requirements are tacked onto it like handling cycles and triggers, dealing with "important" packages first, package sources on removable media, touch minimal groups to be able to interrupt the process if needed (e.g. unattended-upgrades) which not only sky-rocket complexity but also can be mutually exclusive as you e.g. can't have minimal groups and minimal trigger executions at the same time.
2016-06-10do not hang on piped input in PipedFileFdPrivateDavid Kalnischkies
This effects only compressors configured on the fly (rather then the inbuilt ones as they use a library).
2016-06-08edsp: drop privileges before executing solversDavid Kalnischkies
Most (if not all) solvers should be able to run perfectly fine without root privileges as they get the entire state they are supposed to work on via stdin and do not perform any action directly, but just pass suggestions on via stdout. The new default is to run them all as _apt hence, but each solver can configure another user if it chooses/must. The security benefits are minimal at best, but it helps preventing silly mistakes (see 35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good. Note that our 'apt' and 'dump' solver already dropped privileges if they had them.
2016-05-08gpgv: show always webportal error on NODATADavid Kalnischkies
gpg doesn't give use a UID on NODATA, which we were "expecting" (but not using for anything), but just an error number. Instead of collecting these as badsigners which will trigger a "invald signature" error with remarks like "NODATA 1" we instead adapt a message similar to the NODATA error of a clearsigned file (which is actually not reached anymore as we split them up, which fails with a NOSPLIT error, which uses the same general error message). In other words: Not a security relevant change, just a user experience improvement as we now point them to the most likely cause of the problem instead of saying "invalid signature" which would point them in the direction of the archive being broken (for everyone) instead. Closes: 823746
2016-05-04tests: disable generation of Release.gpg by defaultDavid Kalnischkies
Most tests just need a signed repository and don't care if it signed by an InRelease file or a Release.gpg file, so we can save some time by just generating one of them by default. Sounds like not much, but quickly adds up to a few seconds with the amount of tests we have accumulated by now. Git-Dch: Ignore
2016-05-04tests: allow to disable generation of InRelease/Release.gpg fileDavid Kalnischkies
If the test just signs release files to throw away one of them to test the other, we can just as well save the time and not create it. Git-Dch: Ignore
2016-05-01don't show NO_PUBKEY warning if repo is signed by another keyDavid Kalnischkies
Daniel Kahn Gillmor highlights in the bugreport that security isn't improving by having the user import additional keys – especially as importing keys securely is hard. The bugreport was initially about dropping the warning to a notice, but in given the previously mentioned observation and the fact that we weren't printing a warning (or a notice) for expired or revoked keys providing a signature we drop it completely as the code to display a message if this was the only key is in another path – and is considered critical. Closes: 618445
2016-05-01gpgv: handle expired sig as worthlessDavid Kalnischkies
Signatures on data can have an expiration date, too, which we hadn't handled previously explicitly (no problem – gpg still has a non-zero exit code so apt notices the invalid signature) so the error message wasn't as helpful as it could be (aka mentioning the key signing it).
2016-04-25show more details for "Hash Sum mismatch" errorsDavid Kalnischkies
Users tend to report these errors with just this error message… not very actionable and hard to figure out if this is a temporary or 'permanent' mirror-sync issue or even the occasional apt bug. Showing the involved hashsums and modification times should help in triaging these kind of bugs – and eventually we will have less of them via by-hash. The subheaders aren't marked for translation for now as they are technical glibberish and probably easier to deal with if not translated. After all, our iconic "Hash Sum mismatch" is translated at least. These additions were proposed in #817240 by Peter Palfrader.
2016-04-25don't ask server if we have entire file in partial/David Kalnischkies
We have this situation in cases were parts of the transaction are refused (e.g. in a hashsum mismatch) and rerun the update (e.g. in the hope that we get a mirror which is synced this time). Previously we would ask the server with an if-range and in the best case recieve a 416 in response (less featureful server might end up giving us the entire file again or we get the wrong file this time giving us a hashsum mismatch…), which is a waste of time if we know already by checking the hashsums that we got the complete and correct file.
2016-04-14silently skip acquire of empty index filesDavid Kalnischkies
There is just no point in taking the time to acquire empty files – especially as it will be tiny non-empty compressed files usually.
2016-03-21properly check for "all good sigs are weak"David Kalnischkies
Using erase(pos) is invalid in our case here as pos must be a valid and derefenceable iterator, which isn't the case for an end-iterator (like if we had no good signature). The problem runs deeper still through as VALIDSIG is a keyid while GOODSIG is just a longid so comparing them will always fail. Closes: 818910
2016-03-19tests: reenable basic auth test and add @ in usernameDavid Kalnischkies
On launchpad #1558484 a user reports that @ in the authentication tokens parsing of sources.list isn't working in an older (precise) version. It isn't the recommended way of specifying passwords and co (auth.conf is), but we can at least test for regressions (and in this case test at all… who was that "clever" boy disabling a test with exit……… oh, nevermind. Git-Dch: Ignore
2016-03-17test framework: Pass -n to lsof to speed up finding the https portJulian Andres Klode
There is no point in resolving all addresses to their names, this just seriously slows the setup phase down. So just pass -n to not resolve names anymore. Gbp-Dch: ignore
2016-03-15Fix bug where the problemresolve can put a pkg into a heisenstateMichael Vogt
The problemresolver will set the candidate version for pkg P back to the current version if it encounters an impossible to satisfy critical dependency on P. However it did not set the State of the package back as well which lead to a situation where P is neither in Keep,Install,Upgrade,Delete state. Note that this can not be tested via the traditional sh based framework. I added a python-apt based test for this. LP: #1550741 [jak@debian.org: Make the test not fail if apt_pkg cannot be imported]
2016-03-14test: Move --weak-digest initialization to the right placeJulian Andres Klode
This was wrong and caused some issues because apt-key invoked host apt-config with our library. Gbp-Dch: ignore
2016-03-14test: Use SHA512 digests for GPG, reject SHA1-based signaturesJulian Andres Klode
This makes the test suite safe if we ever need to reject SHA1 signatures in an update.
2016-03-13Do not consider SHA1 usableJulian Andres Klode
SHA1 is not reasonably secure anymore, so we should not consider it usable anymore. The test suite is adjusted to account for this.
2016-03-06tests: expect no output while compiling noopchrootDavid Kalnischkies
This way we hopefully notice (new) warnings in this little helper. Git-Dch: Ignore
2016-02-04test: Fix apt-key tests to work with current gpg 2.1Julian Andres Klode
2016-01-27only warn about missing/invalid Date field for nowDavid Kalnischkies
The Date field in the Release file is useful to avoid allowing an attacker to 'downgrade' a user to earlier Release files (and hence to older states of the archieve with open security bugs). It is also needed to allow a user to define min/max values for the validation of a Release file (with or without the Release file providing a Valid-Until field). APT wasn't formally requiring this field before through and (agrueable not binding and still incomplete) online documentation declares it optional (until now), so we downgrade the error to a warning for now to give repository creators a bit more time to adapt – the bigger ones should have a Date field for years already, so the effected group should be small in any case. It should be noted that earlier apt versions had this as an error already, but only showed it if a Valid-Until field was present (or the user tried to used the configuration items for min/max valid-until). Closes: 809329