summaryrefslogtreecommitdiff
path: root/test/integration/framework
AgeCommit message (Collapse)Author
2016-07-15tests: activate dpkg multi-arch even if test is single archDavid Kalnischkies
Most tests are either multiarch, do not care for the specific architecture or do not interact with dpkg, so really effect by this is only test-external-installation-planner-protocol, but its a general issue that while APT can be told to treat any architecture as native dpkg has the native architecture hardcoded so if we run tests we must make sure that dpkg knows about the architecture we will treat as "native" in apt as otherwise dpkg will refuse to install packages from such an architecture. This reverts f883d2c3675eae2700e4cd1532c1a236cae69a4e as it complicates the test slightly for no practical gain after the generic fix.
2016-07-08tests: fix external solver/planner directory setupDavid Kalnischkies
The setup didn't prepare the directories as expected by newer version of tthe external tests in an autopkgtests environment.
2016-07-06don't change owner/perms/times through file:// symlinksDavid Kalnischkies
If we have files in partial/ from a previous invocation or similar such those could be symlinks created by file:// sources. The code is expecting only real files through and happily changes owner, modification times and permission on the file the symlink points to which tend to be files we have no business in touching in this way. Permissions of symlinks shouldn't be changed, changing owner is usually pointless to, but just to be sure we pick the easy way out and use lchown, check for symlinks before chmod/utimes. Reported-By: Mattia Rizzolo on IRC
2016-07-05tests: allow setting environment in extra fileDavid Kalnischkies
It can be handy to set apt options for the testcases which shouldn't be accidentally committed like external planner testing or workarounds for local setups. Gbp-Dch: Ignore
2016-07-02use +0000 instead of UTC by default as timezone in outputDavid Kalnischkies
All apt versions support numeric as well as 3-character timezones just fine and its actually hard to write code which doesn't "accidently" accepts it. So why change? Documenting the Date/Valid-Until fields in the Release file is easy to do in terms of referencing the datetime format used e.g. in the Debian changelogs (policy §4.4). This format specifies only the numeric timezones through, not the nowadays obsolete 3-character ones, so in the interest of least surprise we should use the same format even through it carries a small risk of regression in other clients (which encounter repositories created with apt-ftparchive). In case it is really regressing in practice, the hidden option -o APT::FTPArchive::Release::NumericTimezone=0 can be used to go back to good old UTC as timezone. The EDSP and EIPP protocols use this 'new' format, the text interface used to communicate with the acquire methods does not for compatibility reasons even if none of our methods would be effected and I doubt any other would (in these instances the timezone is 'GMT' as that is what HTTP/1.1 requires). Note that this is only true for apt talking to methods, (libapt-based) methods talking to apt will respond with the 'new' format. It is therefore strongly adviced to support both also in method input.
2016-07-01warn if apt-key is used in scripts/its output parsedDavid Kalnischkies
apt-key needs gnupg for most of its operations, but depending on it isn't very efficient as apt-key is hardly used by users – and scripts shouldn't use it to begin with as it is just a silly wrapper. To draw more attention on the fact that e.g. 'apt-key add' should not be used in favor of "just" dropping a keyring file into the trusted.gpg.d directory this commit implements the display of warnings.
2016-06-30tests: deduplicate package creation framework codeDavid Kalnischkies
Gbp-Dch: Ignore
2016-06-29eipp: let apt make a plan, not make stuff planeDavid Kalnischkies
Julian noticed on IRC that I fall victim to a lovely false friend by calling referring to a 'planer' all the time even through these are machines to e.g. remove splinters from woodwork ("make stuff plane"). The term I meant is written in german in this way (= with a single n) but in english there are two, aka: 'planner'. As that is unreleased code switching all instances without any transitional provisions. Also the reason why its skipped in changelog. Thanks: Julian Andres Klode Gbp-Dch: Ignore
2016-06-27eipp: enable xz-compressed scenario loggingDavid Kalnischkies
In 385d9f2f23057bc5808b5e013e77ba16d1c94da4 I implemented the storage of scenario files based on enabling this by default for EIPP, but I implemented it first optionally for EDSP to have it independent. The reasons mentioned in the earlier commit (debugging and bugreports) obviously apply here, especially as EIPP solutions aren't user approved, nearly impossible to verify before starting the execution and at the time of error the scenario has changed already, so that reproducing the issue becomes hard(er).
2016-06-27eipp: provide the internal planer as an external oneDavid Kalnischkies
Testing the current implementation can benefit from being able to be feed an EIPP request and produce a fully compliant response. It is also a great test for EIPP in general.
2016-06-27eipp: implement version 0.1 of the protocolDavid Kalnischkies
The very first step in introducing the "external installation planer protocol" (short: EIPP) as part of my GSoC2016 project. The description reads: APT-based tools like apt-get, aptitude, synaptic, … work with the user to figure out how their system should look like after they are done installing/removing packages and their dependencies. The actual installation/removal of packages is done by dpkg with the constrain that dependencies must be fulfilled at any point in time (e.g. to run maintainer scripts). Historically APT has a super micro-management approach to this task which hasn't aged that well over the years mostly ignoring changes in dpkg and growing into an unmaintainable mess hardly anyone can debug and everyone fears to touch – especially as more and more requirements are tacked onto it like handling cycles and triggers, dealing with "important" packages first, package sources on removable media, touch minimal groups to be able to interrupt the process if needed (e.g. unattended-upgrades) which not only sky-rocket complexity but also can be mutually exclusive as you e.g. can't have minimal groups and minimal trigger executions at the same time.
2016-06-10do not hang on piped input in PipedFileFdPrivateDavid Kalnischkies
This effects only compressors configured on the fly (rather then the inbuilt ones as they use a library).
2016-06-08edsp: drop privileges before executing solversDavid Kalnischkies
Most (if not all) solvers should be able to run perfectly fine without root privileges as they get the entire state they are supposed to work on via stdin and do not perform any action directly, but just pass suggestions on via stdout. The new default is to run them all as _apt hence, but each solver can configure another user if it chooses/must. The security benefits are minimal at best, but it helps preventing silly mistakes (see 35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good. Note that our 'apt' and 'dump' solver already dropped privileges if they had them.
2016-05-08gpgv: show always webportal error on NODATADavid Kalnischkies
gpg doesn't give use a UID on NODATA, which we were "expecting" (but not using for anything), but just an error number. Instead of collecting these as badsigners which will trigger a "invald signature" error with remarks like "NODATA 1" we instead adapt a message similar to the NODATA error of a clearsigned file (which is actually not reached anymore as we split them up, which fails with a NOSPLIT error, which uses the same general error message). In other words: Not a security relevant change, just a user experience improvement as we now point them to the most likely cause of the problem instead of saying "invalid signature" which would point them in the direction of the archive being broken (for everyone) instead. Closes: 823746
2016-05-04tests: disable generation of Release.gpg by defaultDavid Kalnischkies
Most tests just need a signed repository and don't care if it signed by an InRelease file or a Release.gpg file, so we can save some time by just generating one of them by default. Sounds like not much, but quickly adds up to a few seconds with the amount of tests we have accumulated by now. Git-Dch: Ignore
2016-05-04tests: allow to disable generation of InRelease/Release.gpg fileDavid Kalnischkies
If the test just signs release files to throw away one of them to test the other, we can just as well save the time and not create it. Git-Dch: Ignore
2016-05-01don't show NO_PUBKEY warning if repo is signed by another keyDavid Kalnischkies
Daniel Kahn Gillmor highlights in the bugreport that security isn't improving by having the user import additional keys – especially as importing keys securely is hard. The bugreport was initially about dropping the warning to a notice, but in given the previously mentioned observation and the fact that we weren't printing a warning (or a notice) for expired or revoked keys providing a signature we drop it completely as the code to display a message if this was the only key is in another path – and is considered critical. Closes: 618445
2016-05-01gpgv: handle expired sig as worthlessDavid Kalnischkies
Signatures on data can have an expiration date, too, which we hadn't handled previously explicitly (no problem – gpg still has a non-zero exit code so apt notices the invalid signature) so the error message wasn't as helpful as it could be (aka mentioning the key signing it).
2016-04-25show more details for "Hash Sum mismatch" errorsDavid Kalnischkies
Users tend to report these errors with just this error message… not very actionable and hard to figure out if this is a temporary or 'permanent' mirror-sync issue or even the occasional apt bug. Showing the involved hashsums and modification times should help in triaging these kind of bugs – and eventually we will have less of them via by-hash. The subheaders aren't marked for translation for now as they are technical glibberish and probably easier to deal with if not translated. After all, our iconic "Hash Sum mismatch" is translated at least. These additions were proposed in #817240 by Peter Palfrader.
2016-04-25don't ask server if we have entire file in partial/David Kalnischkies
We have this situation in cases were parts of the transaction are refused (e.g. in a hashsum mismatch) and rerun the update (e.g. in the hope that we get a mirror which is synced this time). Previously we would ask the server with an if-range and in the best case recieve a 416 in response (less featureful server might end up giving us the entire file again or we get the wrong file this time giving us a hashsum mismatch…), which is a waste of time if we know already by checking the hashsums that we got the complete and correct file.
2016-04-14silently skip acquire of empty index filesDavid Kalnischkies
There is just no point in taking the time to acquire empty files – especially as it will be tiny non-empty compressed files usually.
2016-03-21properly check for "all good sigs are weak"David Kalnischkies
Using erase(pos) is invalid in our case here as pos must be a valid and derefenceable iterator, which isn't the case for an end-iterator (like if we had no good signature). The problem runs deeper still through as VALIDSIG is a keyid while GOODSIG is just a longid so comparing them will always fail. Closes: 818910
2016-03-19tests: reenable basic auth test and add @ in usernameDavid Kalnischkies
On launchpad #1558484 a user reports that @ in the authentication tokens parsing of sources.list isn't working in an older (precise) version. It isn't the recommended way of specifying passwords and co (auth.conf is), but we can at least test for regressions (and in this case test at all… who was that "clever" boy disabling a test with exit……… oh, nevermind. Git-Dch: Ignore
2016-03-17test framework: Pass -n to lsof to speed up finding the https portJulian Andres Klode
There is no point in resolving all addresses to their names, this just seriously slows the setup phase down. So just pass -n to not resolve names anymore. Gbp-Dch: ignore
2016-03-15Fix bug where the problemresolve can put a pkg into a heisenstateMichael Vogt
The problemresolver will set the candidate version for pkg P back to the current version if it encounters an impossible to satisfy critical dependency on P. However it did not set the State of the package back as well which lead to a situation where P is neither in Keep,Install,Upgrade,Delete state. Note that this can not be tested via the traditional sh based framework. I added a python-apt based test for this. LP: #1550741 [jak@debian.org: Make the test not fail if apt_pkg cannot be imported]
2016-03-14test: Move --weak-digest initialization to the right placeJulian Andres Klode
This was wrong and caused some issues because apt-key invoked host apt-config with our library. Gbp-Dch: ignore
2016-03-14test: Use SHA512 digests for GPG, reject SHA1-based signaturesJulian Andres Klode
This makes the test suite safe if we ever need to reject SHA1 signatures in an update.
2016-03-13Do not consider SHA1 usableJulian Andres Klode
SHA1 is not reasonably secure anymore, so we should not consider it usable anymore. The test suite is adjusted to account for this.
2016-03-06tests: expect no output while compiling noopchrootDavid Kalnischkies
This way we hopefully notice (new) warnings in this little helper. Git-Dch: Ignore
2016-02-04test: Fix apt-key tests to work with current gpg 2.1Julian Andres Klode
2016-01-27only warn about missing/invalid Date field for nowDavid Kalnischkies
The Date field in the Release file is useful to avoid allowing an attacker to 'downgrade' a user to earlier Release files (and hence to older states of the archieve with open security bugs). It is also needed to allow a user to define min/max values for the validation of a Release file (with or without the Release file providing a Valid-Until field). APT wasn't formally requiring this field before through and (agrueable not binding and still incomplete) online documentation declares it optional (until now), so we downgrade the error to a warning for now to give repository creators a bit more time to adapt – the bigger ones should have a Date field for years already, so the effected group should be small in any case. It should be noted that earlier apt versions had this as an error already, but only showed it if a Valid-Until field was present (or the user tried to used the configuration items for min/max valid-until). Closes: 809329
2016-01-26get sources for packages in multiple releases againDavid Kalnischkies
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected the incorrect overriding of earlier better-fitting results with later (semi-)matches – but that broke the case in which packages are in multiple releases in the same version (and the user has both releases configured). Closes: 812497
2016-01-08tests: limit autotest-functionname generation to sane charactersDavid Kalnischkies
Some (older) versions of bash seem to be allergic to a method named "aptautotest_grep_^apt" (note the caret). Unlikely that we are going to write autotests for such commands so we could just skip those, but lets instead just use "normal" characters in the names and strip the rest as we already did with the (arguable more common) '-'.
2016-01-08support '-' and no parameter for stdin in apt-helper cat-fileDavid Kalnischkies
This way it works more similar to the compressor binaries, which we can relief in this way from their job in the test framework avoiding the need of adding e.g. liblz4-tool to the test dependencies.
2016-01-08keep compressed indexes in a low-cost formatDavid Kalnischkies
Downloading and storing are two different operations were different compression types can be preferred. For downloading we provide the choice via Acquire::CompressionTypes::Order as there is a choice to be made between download size and speed – and limited by whats available in the repository. Storage on the other hand has all compressions currently supported by apt available and to reduce runtime of tools accessing these files the compression type should be a low-cost format in terms of decompression. apt traditionally stores its indexes uncompressed on disk, but has options to keep them compressed. Now that apt downloads additional files we also deal with files which simply can't be stored uncompressed as they are just too big (like Contents for apt-file). Traditionally they are downloaded in a low-cost format (gz) as repositories do not provide other formats, but there might be even lower-cost formats and for download we could introduce higher-cost in the repositories. Downloading an entire index potentially requires recompression to another format, so an update takes potentially longer – but big files are usually updated via pdiffs which has to de- and re-compress anyhow and does it on the fly anyhow, so there is no extra time needed and in general it seems to be benefitial to invest the time in update to save time later on file access.
2016-01-08tests: try to pick up compressors from config automaticallyDavid Kalnischkies
Less hardcoding should help while introducing new compressors. Git-Dch: Ignore
2015-12-19tests: support gpg2 properly in all testcasesDavid Kalnischkies
The output changes slightly between different versions, which we already dealt with in the main testcase for apt-key, but there are two more which do not test both versions explicitly and so still had gpg1 output to check against as this is the default at the moment. Git-Dch: Ignore
2015-12-19avoid evaluating shell in paths used in apt-keyDavid Kalnischkies
apt-key creates internally a script (since ~1.1) which it will call to avoid dealing with an array of different options in the code itself, but while writing this script it wraps the values in "", which will cause the shell to evaluate its content upon execution. To make 'use' of this either set a absolute gpg command or TMPDIR to something as interesting as: "/tmp/This is fü\$\$ing cràzy, \$(man man | head -n1 | cut -d' ' -f1)\$!" If such paths can be encountered in reality is a different question…
2015-12-19tests: support spaces in path and TMPDIRDavid Kalnischkies
This doesn't allow all tests to run cleanly, but it at least allows to write tests which could run successfully in such environments. Git-Dch: Ignore
2015-12-14test framework: More noopchroot fixesJulian Andres Klode
Use asprintf() so we have easy error detection and do not depend on PATH_MAX. Do not add another separator to the generated path, in both cases the path inside the chroot is guaranteed to have a leading / already. Also pass -Wall to gcc.
2015-12-14test framework: Unset no_proxy as wellJulian Andres Klode
This caused test-bug-717891-abolute-uris-for-proxies to fail Gbp-Dch: ignore
2015-12-14test framework: Unset http proxy variables in setupenvironmentJulian Andres Klode
This breaks a lot of test cases Gbp-Dch: ignore
2015-12-14test framework: Correctly generate new paths in noopchrootJulian Andres Klode
The allocated buffer was one byte too small. Allocate a buffer of PATH_MAX instead and use snprintf(), as suggested by Martin Pitt.
2015-12-14non-existing directories don't need to be cleanedDavid Kalnischkies
Trying to clean up directories which do not exist seems rather silly if you think about it, so let apt think about it and stop it. Depends a bit on the caller if this is fixing anything for them as they might try to acquire a lock or doing other clever things as apt does. Closes: 807477
2015-12-14show a more descriptive error for weak Release filesDavid Kalnischkies
If we can't work with the hashes we parsed from the Release file we display now an error message if the Release file includes only weak hashes instead of downloading the indexes and failing to verify them with "Hash Sum mismatch" even through the hashes didn't mismatch (they were just weak). If for some (unlikely) reason we have got weak hashes only for individual targets we will show a warning to this effect (again, befor downloading and failing the index itself). Closes: 806459
2015-12-06replace "which" with "command -v" for portabilityDavid Kalnischkies
which is a debian specific tool packaged in debianutils (essential) while command is a shell builtin defined by POSIX. Closes: 807144 Thanks: Mingye Wang for the suggestion.
2015-11-29tests: fix typos, correct helpmsgs and test testsDavid Kalnischkies
Git-Dch: Ignore
2015-11-28disable privilege-drop verification by default as fakeroot trips over itDavid Kalnischkies
Dropping privileges is an involved process for code and system alike so ideally we want to verify that all the work wasn't in vain. Stuff designed to sidestep the usual privilege checks like fakeroot (and its many alternatives) have their problem with this through, partly through missing wrapping (#806521), partly as e.g. regaining root from an unprivileged user is in their design. This commit therefore disables most of these checks by default so that apt runs fine again in a fakeroot environment. Closes: 806475
2015-11-28tests: use id to get user/group instead of environmentDavid Kalnischkies
debci seems to have a cleaner environment now and even if not we could never guess nogroup, so figure it out properly via 'id'. Git-Dch: Ignore
2015-11-19ignore lost+found in private directory cleanupDavid Kalnischkies
In ce1f3a2c we started warning about failing unlinking, which we consistently do for directories. That isn't a problem as directories usually aren't in the places we do want to clean up – with the potential exeception of "lost+found", so lets ignore it like we ignore our own partial/ subdirectory. Closes: 805424