| Age | Commit message (Collapse) | Author |
|---|
|
Usually they don't provide a lot in terms of what they test, but they
help in covering many lines from strictly anecdotal commands (stats,
moo) and error messages, so that stuff which really needs to be tested,
but isn't is better visible in coverage reports.
Git-Dch: Ignore
|
|
We create our own directories here and work without root in them, so we
can also test the locking with them as it is how we usually operate.
Git-Dch: Ignore
|
|
The tool checks for debconf version before printing the info it
extracts, so that it doesn't extract data which can't be interpreted
before debconf is upgraded. It is only fair to check for this behaviour
in the tests.
Git-Dch: Ignore
|
|
By convention, if I run a tool with --help or --version I expect it to
exit successfully with the usage, while if I do call it wrong (like
without any parameters) I expect the usage message shown with a non-zero
exit.
|
|
Git-Dch: Ignore
|
|
It is sometimes handy to have an installed package also in the archive,
but this was until now harder than it should as you had to duplicate the
lines, which is especially dangerous while writing the tests as it
easily happens that these two lines divert and so the same-but-different
version detection kicks in.
Git-Dch: Ignore
|
|
We can use either and some tests exercise this, but the default should
be what we want to use and that is a split out long description file
which is properly mentioned in the Release file.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
partial files are chowned by the Item baseclass to let the methods work
with them. Now, this baseclass is also responsible for chowning the
files back to root instead of having various deeper levels do this.
The consequence is that all overloaded Failed() methods now call the
Item::Failed base as their first step. The same is done for Done().
The effect is that even in partial files usually don't belong to
_apt anymore, helping sneakernets and reducing possibilities of a bad
method modifying files not belonging to them.
The change is supported by the framework not only supporting being run
as root, but with proper permission management, too, so that privilege
dropping can be tested with them.
|
|
Private temporary directories as created by e.g. libpam-tmpdir are nice,
but they are also very effective in preventing our priviledge dropping
to work as TMPDIR will be set to a directory only root has access to, so
working with it as _apt will fail. We circumvent this by extending our
check for a usable TMPDIR setting by checking access rights.
Closes: 765951
|
|
Adds a new testwarning which tests for zero exit and the presents of a
warning in the output, failing if either is not the case or if an error
is found, too. This allows us to change testsuccess to accept only
totally successful executions (= without warnings) which should help
finding regressions.
Git-Dch: Ignore
|
|
These functions check the exit code of the command, but for apt commands
we can go further and require an error message for non-zero exits and
none for zero exits.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Adds some infrastructure to run tests automatically for certain
commands. The first command being 'apt-get update' (and 'apt update')
which check for correct permission and owner of the files in lists/.
Git-Dch: Ignore
|
|
If we get an IMS hit for an InRelease file we use the file we already
have and pass it into reverification, but this changes the permissions
and on abort of the transaction they weren't switched back.
This is now done, additionally, every file in partial which hasn't
failed gets permission and owner changed for root access as well, as it
is very well possible that the next invocation will (re)use these files.
|
|
Running the testcases is usually not a good idea, but it can be handy to
check if the privilege dropping works.
Git-Dch: Ignore
|
|
Add a new configallowinsecurerepositories that controls the value
of Acquire::AllowInsecureRepositories for the tests. Set it to
"false" for most of the testsuite and only enable it where its
really needed. We want to switch the default for this post-jessie.
|
|
I am pretty sure I did that before committing broken stuff…
Git-Dch: Ignore
|
|
Do not require a special flag to be present to update trusted=yes
sources as this flag in the sources.list is obviously special enough.
Note that this is just disabling the error message, the user will still
be warned about all the (possible) failures the repository generated, it
is just triggering the acceptance of the warnings on a source-by-source
level.
Similarily, the trusted=no flag doesn't require the user to pass
additional flags to update, if the repository looks fine in the view of
apt it will update just fine. The unauthenticated warnings will "just" be
presented then the data is used.
In case you wonder: Both was the behavior in previous versions, too.
|
|
On travis-ci connect.cc detects a rotation, triggering it store the IP
which is later appended to the error message, which is all nice and
great if we deal with a real server, but in the testcases it just
triggers failures as strings do not match.
Git-Dch: Ignore
|
|
Some distributions (or repositories) do not have as much
"Ign-discipline" as I would like to, so that could be pretty distracting
for our users if enabled by default. It is handy for testcases though.
Git-Dch: Ignore
|
|
feature/acq-trans
Conflicts:
apt-pkg/acquire-item.cc
|
|
consistently using Item::Failed in all specializec classes helps setting
up some information bits otherwise unset, so some errors had an empty
reason as an error. Ign is upgraded to display the error message we
ignored to further help in understanding what happens.
|
|
Using a different user for calling methods is intended to protect us
from methods running amok (via remotely exploited bugs) by limiting what
can be done by them. By using root:root for the final directories and
just have the files in partial writeable by the methods we enhance this
in sofar as a method can't modify already verified data in its parent
directory anymore.
As a side effect, this also clears most of the problems you could have
if the final directories are shared without user-sharing or if these
directories disappear as they are now again root owned and only the
partial directories contain _apt owned files (usually none if apt isn't
running) and the directory itself is autocreated with the right
permissions.
|
|
Conflicts:
apt-pkg/acquire-item.cc
|
|
Some advanced commands can be executed without the keyring being
modified like --verify, so this adds an option to disable the mergeback
and uses it for our gpg calling code.
Git-Dch: Ignore
|
|
For some advanced usecases it might be handy to specify the secret
keyring to be used (e.g. as it is used in the testcases), but specifying
it via a normal option for gnupg might not be available forever:
http://lists.gnupg.org/pipermail/gnupg-users/2013-August/047180.html
Git-Dch: Ignore
|
|
beside testing apt-key a bit it also avoids duplicating gpghome setup
code in apt-key and the test framework
Git-Dch: Ignore
|
|
apt-key does the keyring merge as we need it, so we just call it instead
of reimplementing it to do the merging before gpgv. This means we don't
use gpgv anymore (we never depended on it explicitly - bad style), but
it also means that the message in apt-cdrom add is a bit less friendly
as it says loudly "untrusted key", but for a one-time command its okay.
|
|
Git-Dch: Ignore
|
|
Conflicts:
apt-pkg/acquire-item.cc
apt-pkg/acquire-item.h
apt-pkg/cachefilter.h
configure.ac
debian/changelog
|
|
Instead of trying to inspect /proc and the fds inside we use "test -t 1"
instead as this is available and working on kfreebsd as well – not that
something breaks if we wouldn't, but we like color.
Git-Dch: Ignore
|
|
apt-cache search supported this since ever and in the code for apt was a
fixme indicating this should be added here as well, so here we go.
|
|
Conflicts:
apt-pkg/deb/deblistparser.cc
doc/po/apt-doc.pot
doc/po/de.po
doc/po/es.po
doc/po/fr.po
doc/po/it.po
doc/po/ja.po
doc/po/pl.po
doc/po/pt.po
doc/po/pt_BR.po
po/da.po
po/mr.po
po/vi.po
|
|
The behaviour of echo "\tA\t" differs between dash/zsh which interprets
the \t as tab and bash which prints it literally. Similar things happen
for other escape sequences – without the -e flag.
Switching to printf makes this more painless^Wportable, so that the
tests are also working correctly with bash as sh.
(commit message by committer, patch otherwise unmodified)
|
|
Conflicts:
debian/changelog
|
|
|
|
|
|
Adds also a small testcase for EDSP
Git-Dch: Ignore
|
|
dpkg on Ubuntu 12.04 does not seem to support parsing arch-specific
dependencies, so we try to detect if we face such a dpkg in the test.
In the other test the order depends on libdb, which changes per arch, so
we just run it through our sorting binary and be happy (hopefully).
Git-Dch: Ignore
|
|
dpkg on Ubuntu 12.04 does not seem to support parsing arch-specific
dependencies, so we try to detect if we face such a dpkg in the test.
In the other test the order depends on libdb, which changes per arch, so
we just run it through our sorting binary and be happy (hopefully).
Git-Dch: Ignore
|
|
Now that libapts acquire system happily passes around hashes and can be
made to support new ones without an ABI break in the future, we can
free ftparchive from all the deprecation warnings the last commit
introduced for it.
The goal here isn't to preserve ABI as we have none to keep here, but to
help avoiding introduction problems of 'new' hashes later as bugs creep
into the copy&paste parts, so short/less of them is good.
|
|
The line contains everchanging execution statistics which is harmful for
testcases as they need to filter out such lines, but this is hard so we
can just add an option to disable them instead and be done.
Git-Dch: Ignore
|
|
debian/experimental
|
|
|
|
debian/sid
|
|
|
|
This patch should fix spurious test failures in jenkins or travis
that are caused by a race condition in the {stunnel,aptwebserver}.pid
file creation
|
|
|
|
Use mkstemp() in apt-extractemplates and add a integrationtest
for apt-extracttemplates too. Thanks to Steve Kemp for the report.
|
