summaryrefslogtreecommitdiff
path: root/test/integration/framework
AgeCommit message (Collapse)Author
2016-03-06tests: expect no output while compiling noopchrootDavid Kalnischkies
This way we hopefully notice (new) warnings in this little helper. Git-Dch: Ignore
2016-02-04test: Fix apt-key tests to work with current gpg 2.1Julian Andres Klode
2016-01-27only warn about missing/invalid Date field for nowDavid Kalnischkies
The Date field in the Release file is useful to avoid allowing an attacker to 'downgrade' a user to earlier Release files (and hence to older states of the archieve with open security bugs). It is also needed to allow a user to define min/max values for the validation of a Release file (with or without the Release file providing a Valid-Until field). APT wasn't formally requiring this field before through and (agrueable not binding and still incomplete) online documentation declares it optional (until now), so we downgrade the error to a warning for now to give repository creators a bit more time to adapt – the bigger ones should have a Date field for years already, so the effected group should be small in any case. It should be noted that earlier apt versions had this as an error already, but only showed it if a Valid-Until field was present (or the user tried to used the configuration items for min/max valid-until). Closes: 809329
2016-01-26get sources for packages in multiple releases againDavid Kalnischkies
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected the incorrect overriding of earlier better-fitting results with later (semi-)matches – but that broke the case in which packages are in multiple releases in the same version (and the user has both releases configured). Closes: 812497
2016-01-08tests: limit autotest-functionname generation to sane charactersDavid Kalnischkies
Some (older) versions of bash seem to be allergic to a method named "aptautotest_grep_^apt" (note the caret). Unlikely that we are going to write autotests for such commands so we could just skip those, but lets instead just use "normal" characters in the names and strip the rest as we already did with the (arguable more common) '-'.
2016-01-08support '-' and no parameter for stdin in apt-helper cat-fileDavid Kalnischkies
This way it works more similar to the compressor binaries, which we can relief in this way from their job in the test framework avoiding the need of adding e.g. liblz4-tool to the test dependencies.
2016-01-08keep compressed indexes in a low-cost formatDavid Kalnischkies
Downloading and storing are two different operations were different compression types can be preferred. For downloading we provide the choice via Acquire::CompressionTypes::Order as there is a choice to be made between download size and speed – and limited by whats available in the repository. Storage on the other hand has all compressions currently supported by apt available and to reduce runtime of tools accessing these files the compression type should be a low-cost format in terms of decompression. apt traditionally stores its indexes uncompressed on disk, but has options to keep them compressed. Now that apt downloads additional files we also deal with files which simply can't be stored uncompressed as they are just too big (like Contents for apt-file). Traditionally they are downloaded in a low-cost format (gz) as repositories do not provide other formats, but there might be even lower-cost formats and for download we could introduce higher-cost in the repositories. Downloading an entire index potentially requires recompression to another format, so an update takes potentially longer – but big files are usually updated via pdiffs which has to de- and re-compress anyhow and does it on the fly anyhow, so there is no extra time needed and in general it seems to be benefitial to invest the time in update to save time later on file access.
2016-01-08tests: try to pick up compressors from config automaticallyDavid Kalnischkies
Less hardcoding should help while introducing new compressors. Git-Dch: Ignore
2015-12-19tests: support gpg2 properly in all testcasesDavid Kalnischkies
The output changes slightly between different versions, which we already dealt with in the main testcase for apt-key, but there are two more which do not test both versions explicitly and so still had gpg1 output to check against as this is the default at the moment. Git-Dch: Ignore
2015-12-19avoid evaluating shell in paths used in apt-keyDavid Kalnischkies
apt-key creates internally a script (since ~1.1) which it will call to avoid dealing with an array of different options in the code itself, but while writing this script it wraps the values in "", which will cause the shell to evaluate its content upon execution. To make 'use' of this either set a absolute gpg command or TMPDIR to something as interesting as: "/tmp/This is fü\$\$ing cràzy, \$(man man | head -n1 | cut -d' ' -f1)\$!" If such paths can be encountered in reality is a different question…
2015-12-19tests: support spaces in path and TMPDIRDavid Kalnischkies
This doesn't allow all tests to run cleanly, but it at least allows to write tests which could run successfully in such environments. Git-Dch: Ignore
2015-12-14test framework: More noopchroot fixesJulian Andres Klode
Use asprintf() so we have easy error detection and do not depend on PATH_MAX. Do not add another separator to the generated path, in both cases the path inside the chroot is guaranteed to have a leading / already. Also pass -Wall to gcc.
2015-12-14test framework: Unset no_proxy as wellJulian Andres Klode
This caused test-bug-717891-abolute-uris-for-proxies to fail Gbp-Dch: ignore
2015-12-14test framework: Unset http proxy variables in setupenvironmentJulian Andres Klode
This breaks a lot of test cases Gbp-Dch: ignore
2015-12-14test framework: Correctly generate new paths in noopchrootJulian Andres Klode
The allocated buffer was one byte too small. Allocate a buffer of PATH_MAX instead and use snprintf(), as suggested by Martin Pitt.
2015-12-14non-existing directories don't need to be cleanedDavid Kalnischkies
Trying to clean up directories which do not exist seems rather silly if you think about it, so let apt think about it and stop it. Depends a bit on the caller if this is fixing anything for them as they might try to acquire a lock or doing other clever things as apt does. Closes: 807477
2015-12-14show a more descriptive error for weak Release filesDavid Kalnischkies
If we can't work with the hashes we parsed from the Release file we display now an error message if the Release file includes only weak hashes instead of downloading the indexes and failing to verify them with "Hash Sum mismatch" even through the hashes didn't mismatch (they were just weak). If for some (unlikely) reason we have got weak hashes only for individual targets we will show a warning to this effect (again, befor downloading and failing the index itself). Closes: 806459
2015-12-06replace "which" with "command -v" for portabilityDavid Kalnischkies
which is a debian specific tool packaged in debianutils (essential) while command is a shell builtin defined by POSIX. Closes: 807144 Thanks: Mingye Wang for the suggestion.
2015-11-29tests: fix typos, correct helpmsgs and test testsDavid Kalnischkies
Git-Dch: Ignore
2015-11-28disable privilege-drop verification by default as fakeroot trips over itDavid Kalnischkies
Dropping privileges is an involved process for code and system alike so ideally we want to verify that all the work wasn't in vain. Stuff designed to sidestep the usual privilege checks like fakeroot (and its many alternatives) have their problem with this through, partly through missing wrapping (#806521), partly as e.g. regaining root from an unprivileged user is in their design. This commit therefore disables most of these checks by default so that apt runs fine again in a fakeroot environment. Closes: 806475
2015-11-28tests: use id to get user/group instead of environmentDavid Kalnischkies
debci seems to have a cleaner environment now and even if not we could never guess nogroup, so figure it out properly via 'id'. Git-Dch: Ignore
2015-11-19ignore lost+found in private directory cleanupDavid Kalnischkies
In ce1f3a2c we started warning about failing unlinking, which we consistently do for directories. That isn't a problem as directories usually aren't in the places we do want to clean up – with the potential exeception of "lost+found", so lets ignore it like we ignore our own partial/ subdirectory. Closes: 805424
2015-11-19tests: use quiet level 0 by default in testsDavid Kalnischkies
Git-Dch: Ignore
2015-11-19support setting empty values (sanely) & removing support forDavid Kalnischkies
space-gapping: '-o option= value' That is a very old feature (straight from 1998), but it is super surprising if you try setting empty values and instead get error messages or a non-empty value as the next parameter is treated as the value – which could have been empty, so if for some reason you need a compatible way of setting an empty value try: '-o option="" ""'. I can only guess that the idea was to support '-o option value', but we survived 17 years without it, we will do fine in the future I guess. Similar is the case for '-t= testing' even through '-t testing' existed before and the code even tried to detect mistakes like '-t= -b' … all gone now. Technically that is as its removing a feature replacing it with another a major interface break. In practice I really hope for my and their sanity that nobody was using this; but if for some reaon you do: Remove the space and be done. I found the patch and the bugreport actually only after the fact, but its reassuring that others are puzzled by this as well and hence a thanks is in perfect order here as the patch is practical identical [expect that this one here adds tests and other bonus items]. Thanks: Daniel Hartwig for initial patch. Closes: 693092
2015-11-18tests: fail testsuccess if notices are shown, tooDavid Kalnischkies
Notices are just hints, but if they are printed in tests, they should be expected and if not the test should fail. No current test has this problem, so that is just potential future proving. Git-Dch: Ignore
2015-11-05allow acquire method specific options via Binary scopeDavid Kalnischkies
Allows users who know what they are getting themselves into with this trick to e.g. disable privilege dropping for e.g. file:// until they can fix up the permissions on those repositories. It helps also the test framework and people with a similar setup (= me) to run in less modified environments.
2015-11-04allow getaddrinfo flag AI_ADDRCONFIG to be disabledDavid Kalnischkies
This flags is generally handy to avoid having to deal with ipv6 results on an ipv4-only system, but it prevents e.g. the testcases from working if the testsystem has no configured address at the moment (expect loopback), so allow it to be sidestepped and let the testcases sidestep it. Git-Dch: Ignore
2015-11-04support arch:all data e.g. in separate Packages fileDavid Kalnischkies
Based on a discussion with Niels Thykier who asked for Contents-all this implements apt trying for all architecture dependent files to get a file for the architecture all, which is treated internally now as an official architecture which is always around (like native). This way arch:all data can be shared instead of duplicated for each architecture requiring the user to download the same information again and again. There is one problem however: In Debian there is already a binary-all/ Packages file, but the binary-any files still include arch:all packages, so that downloading this file now would be a waste of time, bandwidth and diskspace. We therefore need a way to decide if it makes sense to download the all file for Packages in Debian or not. The obvious answer would be a special flag in the Release file indicating this, which would need to default to 'no' and every reasonable repository would override it to 'yes' in a few years time, but the flag would be there "forever". Looking closer at a Release file we see the field "Architectures", which doesn't include 'all' at the moment. With the idea outlined above that 'all' is a "proper" architecture now, we interpret this field as being authoritative in declaring which architectures are supported by this repository. If it says 'all', apt will try to get all, if not it will be skipped. This gives us another interesting feature: If I configure a source to download armel and mips, but it declares it supports only armel apt will now print a notice saying as much. Previously this was a very cryptic failure. If on the other hand the repository supports mips, too, but for some reason doesn't ship mips packages at the moment, this 'missing' file is silently ignored (= that is the same as the repository including an empty file). The Architectures field isn't mandatory through, so if it isn't there, we assume that every architecture is supported by this repository, which skips the arch:all if not listed in the release file.
2015-11-04disable updating insecure repositories in apt by defaultDavid Kalnischkies
apt is an interactive command and the reasons we haven't this option set for everything is mostly in keeping compatibility for a little while longer to allow scripts to be changed if need be.
2015-11-04refer to apt-secure(8) in unsecure repositories warningDavid Kalnischkies
The manpage is also slightly updated to work better as a central hub to push people from all angles into the right directions without writting a book disguised as an error message.
2015-11-04rework errors and warnings around insecure repositoriesDavid Kalnischkies
Insecure (aka unsigned) repositories are bad, period. We want to get right of them finally and as a first step we are printing scary warnings. This is already done, this commit just changes the messages to be more consistent and prevents them from being displayed if authenticity is guaranteed some other way (as indicated with trusted=yes). The idea is to first print the pure fact like "repository isn't signed" as a warning (and later as an error), while giving an explaination in a immediately following notice (which is displayed only in quiet level 0: so in interactive use, not in scripts and alike). Closes: 796549
2015-11-04unbreak the copy-method claiming hashsum mismatch since ~exp9David Kalnischkies
Commit 653ef26c70dc9c0e2cbfdd4e79117876bb63e87d broke the camels back in sofar that everything works in terms of our internal use of copy:/, but external use is completely destroyed. This is kinda the reverse of what happened in "parallel" in the sid branch, where external use was mostly fine, internal and external exploded on the GzipIndexes option. We fix this now by rewriting our internal use by letting copy:/ only do what the name suggests it does: Copy files and not uncompress them on-the-fly. Then we teach copy and the uncompressors how to deal with /dev/null and use it as destination file in case we don't want to store the uncompressed files on disk. Closes: 799158
2015-09-15tests: add a -j $jobs mode to test runner for parallel executionDavid Kalnischkies
Now that tests can be run in parallel, lets actually do it… The mode has some downsides like not collecting the failed tests, but it can be a lot faster than a sequential run and is therefore a good alternative in testing those "this shouldn't break anything" changes (which tend to break everything if untested). Git-Dch: Ignore
2015-09-15tests: don't use hardcoded port for http and httpsDavid Kalnischkies
This allows running tests in parallel. Git-Dch: Ignore
2015-09-14tests: try to support spaces in TMPDIRDavid Kalnischkies
Not all tests work yet, most notable the cdrom tests, but those require changes in libapt itself to have a proper fix and what we have fixed so far is good enough progress for now. Git-Dch: Ignore
2015-09-14tests: use SHA1 checksum only by default in testsDavid Kalnischkies
This is mostly a small speedup for the testcases, but it is also handy to document which tests actually deal with a specific hash compared to those which 'just' need some hash which can be important while adding new hashes. Git-Dch: Ignore
2015-09-14various changes to increase test-coverageDavid Kalnischkies
And of course, testing obscure things ends up showing obscure 'bugs' or better shortcomings/inconsitencies, so lets fix them with the tests. Git-Dch: Ignore
2015-09-14select kernels to protect from autoremove based on Debian versionDavid Kalnischkies
This is basically a rewrite of the script with the general idea of finding the Debian version of the installed kernels – as multiple flavours will have the same Debian version – select the two newest of them and translate them back to versions found in package names. This way we avoid e.g. kernel and kernel-rt to use up the protected slots even through they are basically the same kernel (just a different flavour) so it is likely that if kernel doesn't work for some reason, kernel-rt will not either. This also deals with foreign kernel packages, kernels on hold and partly installed kernels (in case multiple kernels are installed in the same apt run) in a hopefully sensible way. Closes: 787827
2015-09-14tests: allow to run (selfbuilt) dpkg under gdbDavid Kalnischkies
Git-Dch: Ignore
2015-09-14tests: refactor printing of the quiet failure headerDavid Kalnischkies
Git-Dch: Ignore
2015-09-14tests: store msgmsg message for display in fail as wellDavid Kalnischkies
Git-Dch: Ignore
2015-09-02tests: collect more details about failed checkdiffsDavid Kalnischkies
Git-Dch: Ignore
2015-09-01Consider md5sum no longer a usable hashMichael Vogt
The md5sum hash is broken since some time and we should no longer consider it a usable hash. Also update the tests to reflect this.
2015-08-31test: show the highlevel test for lowerranking onesDavid Kalnischkies
testsuccess checks the return code, but it does also some autotests based on the command like grepping for dpkg warnings in a apt-get install call – but if this finds something it is just showing the grep command. With this change it will additionally show the first msgtest which in this case will detail the actual apt-get install call. Git-Dch: Ignore
2015-08-31tests: store msgtest in -q mode for display in msgfailDavid Kalnischkies
Not-quiet output is very verbose and with our growing array of tests generates many many lines which e.g. kills the log display in travis-ci and obscures failures and uncatched output in a wall of details. The -q mode fixed this by callapsing passed tests to a single P and now with some rework we can even get failures properly displayed with the message from msgtest. Git-Dch: Ignore
2015-08-27allow explicit dis/enable of IndexTargets in sources optionsDavid Kalnischkies
While Target{,-Add,-Remove} is available for configuring IndexTargets already, allow Targets to be mentioned explicitely as yes/no options as well, so that the Target 'Contents' can be disabled via 'Contents: no' as well as 'Target-Remove: Contents'.
2015-08-27fix various typos reported by codespellDavid Kalnischkies
Reported-By: codespell
2015-08-18Add support for "apt-cache showsrc --only-source srcpkgname"Michael Vogt
Thanks: Steve Slangasek for the suggestion Closes: 695633
2015-08-12travis: add ppa:ubuntu-toolschain-r/test as source for gcc-5David Kalnischkies
This makes travis-ci able to run our tests again. Sometimes. If it doesn't spontaneously fails with internal gcc errors… Git-Dch: Ignore
2015-08-10move APT::Never-MarkAuto-Sections handling to MarkDeleteDavid Kalnischkies
Having the handling in MarkInstall means that it just effects installation of the metapackage, but if the dependencies change the new dependencies aren't protected (and the old dependencies are still protected for no 'reason'). Having it in MarkDelete means that if a metapackage is sheduled for removal all its currently installed dependencies are marked as manual, which helps against both as in this case there is no new/old and additionally if a user decides the installation of a metapackage was wrong he can just remove it explicitely avoid the manual marking entirely.