| Age | Commit message (Collapse) | Author |
|---|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Note that dpkg currently has a workaround implemented to allow upgrades
to jessie to be clean, so that the test works before and after. Also
note that test (compared to the one in the bug) drops the await test as
its is considered a loop by dpkg now.
Closes: 769609
|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
Real webservers (like apache) actually send an error page with a 416
response, but our client didn't expect it leaving the page on the socket
to be parsed as response for the next request (http) or as file content
(https), which isn't what we want at all… Symptom is a "Bad header line"
as html usually doesn't parse that well to an http-header.
This manifests itself e.g. if we have a complete file (or larger) in
partial/ which isn't discarded by If-Range as the server doesn't support
it (or it is just newer, think: mirror rotation).
It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a,
which removed the filesize - 1 trick, but this had its own problems…
To properly test this our webserver gains the ability to reply with
transfer-encoding: chunked as most real webservers will use it to send
the dynamically generated error pages.
(The tests and their binary helpers had to be slightly modified to
apply, but the patch to fix the issue itself is unchanged.)
Closes: 768797
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
Git-Dch: Ignore
|
|
Instead of trying to inspect /proc and the fds inside we use "test -t 1"
instead as this is available and working on kfreebsd as well – not that
something breaks if we wouldn't, but we like color.
Git-Dch: Ignore
|
|
apt-cache search supported this since ever and in the code for apt was a
fixme indicating this should be added here as well, so here we go.
|
|
The behaviour of echo "\tA\t" differs between dash/zsh which interprets
the \t as tab and bash which prints it literally. Similar things happen
for other escape sequences – without the -e flag.
Switching to printf makes this more painless^Wportable, so that the
tests are also working correctly with bash as sh.
(commit message by committer, patch otherwise unmodified)
|
|
|
|
|
|
Adds also a small testcase for EDSP
Git-Dch: Ignore
|
|
dpkg on Ubuntu 12.04 does not seem to support parsing arch-specific
dependencies, so we try to detect if we face such a dpkg in the test.
In the other test the order depends on libdb, which changes per arch, so
we just run it through our sorting binary and be happy (hopefully).
Git-Dch: Ignore
|
|
debian/sid
|
|
|
|
This patch should fix spurious test failures in jenkins or travis
that are caused by a race condition in the {stunnel,aptwebserver}.pid
file creation
|
|
|
|
Use mkstemp() in apt-extractemplates and add a integrationtest
for apt-extracttemplates too. Thanks to Steve Kemp for the report.
|
|
|
|
Beside fixing this minor code duplication it also resolves the problem
of messing up vim syntax-highlighting.
Git-Dch: Ignore
|
|
Mostly ensures that we use the build methods and not the system
provided methods in the tests (if we don't want it that way).
Git-Dch: Ignore
|
|
kfreebsd as well as hurd kernel packages call the postinst script as
well so we just need to enable the correct parsing for installed
packages and disable the "protect every version" hammer for them.
|
|
With APT::VersionedKernelPackages users have the option of adding
packages like pre-build out-of-tree modules to the list of automatically
protected from being autoremoved.
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
The unpack of a M-A:same package will force the unpack of all its
siblings directly to prevent that they could be separated by later
immediate actions. In commit 634985f8 a call to SmartConfigure was
introduced to configure these packages at the time the installation
order encounters them. Usually, the unpack order is already okay, so
that this 'earlier' unpack was not needed and if it wouldn't have been
done, the package would now only be unpacked, but by configuring the package
now we impose new requirements which must be satisfied. The code is
clever enough to handle this most of the time (it worked for 2 years!),
but it isn't needed and in very coupled cases this can fail.
Removing this call again removes this extra burden and so simplifies the
ordering as can be seen in the modified tests. Famous last words, but I
don't see a reason for this extra burden to exist hence the remove.
Closes: 740843
|
|
Git-Dch: Ignore
|
|
Inspired by the rest of the patch in 661537, but abstract the
parsing of various ways of setting the build profiles more so it can
potentially be reused and all apt parts have the same behaviour.
Especially config options, cmdline options and environment will not be
combined as proposed as this isn't APTs usual behaviour and dpkg doesn't
do it either, so one overrides the other as it normally does.
|
|
|
|
|
|
|
|
|
|
|
|
Git-Dch: Ignore
|
|
This change prevents changing the protocol from https to http.
|
|
switch protocols at random is a bad idea if e.g. http can switch to
file, so we limit the possibilities to http to http and http to https.
As very few people (less than 1% according to popcon) have https
installed this likely changes nothing in terms of failure. The commit is
adding a friendly hint which package needs to be installed though.
|
|
Issues in doc/po/de.po (fixed by Chris already) and
test/integration/framework
Git-Dch: Ignore
|
|
Conflicts:
apt-private/private-list.cc
doc/po/de.po
test/integration/framework
|
|
debian/experimental-no-abi-break
|
|
Without a PTY attached do not use color, but use the same MSGLEVEL with
or without a PTY. The level is better adjust via flags – especially as
it is likely that without a PTY you want fullblown logs instead of
the reduced display you get with -q otherwise.
Git-Dch: Ignore
|
|
otherwise you get with pickier umasks errors like:
dpkg-deb: error: control directory has bad permissions 700 (must be
>=0755 and <=0775)
so we just force a 755 for the control directory and dpkg is happy.
Git-Dch: Ignore
|
|
Maintaining (mainly the deletion of them) is a pain and they litter /tmp
while the testcase is run for no good reason as we could just as well
drop it into our tmpdir we have anyway and let them be deleted with the
rest automatically
Git-Dch: Ignore
|
|
also avoids redirecting messages from dpkg-deb to /dev/null as it might
fail (as it is quiet picky) and we should know why if it does.
Git-Dch: Ignore
|
|
|
|
Also adds a friendly note about how many tests were run/passed so that
the end of the testrun isn't all that negative by just showing fails.
(It now tells us that we have 111 tests at the moment!)
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Can happen e.g. if port 8080 is already used by something else
Git-Dch: Ignore
|
|
Rework also uncovers two FIXMEs
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
|
