| Age | Commit message (Collapse) | Author |
|---|
|
The unpack of a M-A:same package will force the unpack of all its
siblings directly to prevent that they could be separated by later
immediate actions. In commit 634985f8 a call to SmartConfigure was
introduced to configure these packages at the time the installation
order encounters them. Usually, the unpack order is already okay, so
that this 'earlier' unpack was not needed and if it wouldn't have been
done, the package would now only be unpacked, but by configuring the package
now we impose new requirements which must be satisfied. The code is
clever enough to handle this most of the time (it worked for 2 years!),
but it isn't needed and in very coupled cases this can fail.
Removing this call again removes this extra burden and so simplifies the
ordering as can be seen in the modified tests. Famous last words, but I
don't see a reason for this extra burden to exist hence the remove.
Closes: 740843
|
|
Git-Dch: Ignore
|
|
Inspired by the rest of the patch in 661537, but abstract the
parsing of various ways of setting the build profiles more so it can
potentially be reused and all apt parts have the same behaviour.
Especially config options, cmdline options and environment will not be
combined as proposed as this isn't APTs usual behaviour and dpkg doesn't
do it either, so one overrides the other as it normally does.
|
|
|
|
|
|
|
|
|
|
Git-Dch: Ignore
|
|
This change prevents changing the protocol from https to http.
|
|
switch protocols at random is a bad idea if e.g. http can switch to
file, so we limit the possibilities to http to http and http to https.
As very few people (less than 1% according to popcon) have https
installed this likely changes nothing in terms of failure. The commit is
adding a friendly hint which package needs to be installed though.
|
|
Issues in doc/po/de.po (fixed by Chris already) and
test/integration/framework
Git-Dch: Ignore
|
|
Conflicts:
apt-private/private-list.cc
doc/po/de.po
test/integration/framework
|
|
debian/experimental-no-abi-break
|
|
Without a PTY attached do not use color, but use the same MSGLEVEL with
or without a PTY. The level is better adjust via flags – especially as
it is likely that without a PTY you want fullblown logs instead of
the reduced display you get with -q otherwise.
Git-Dch: Ignore
|
|
otherwise you get with pickier umasks errors like:
dpkg-deb: error: control directory has bad permissions 700 (must be
>=0755 and <=0775)
so we just force a 755 for the control directory and dpkg is happy.
Git-Dch: Ignore
|
|
Maintaining (mainly the deletion of them) is a pain and they litter /tmp
while the testcase is run for no good reason as we could just as well
drop it into our tmpdir we have anyway and let them be deleted with the
rest automatically
Git-Dch: Ignore
|
|
also avoids redirecting messages from dpkg-deb to /dev/null as it might
fail (as it is quiet picky) and we should know why if it does.
Git-Dch: Ignore
|
|
|
|
Also adds a friendly note about how many tests were run/passed so that
the end of the testrun isn't all that negative by just showing fails.
(It now tells us that we have 111 tests at the moment!)
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Can happen e.g. if port 8080 is already used by something else
Git-Dch: Ignore
|
|
Rework also uncovers two FIXMEs
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
|
|
|
|
|
|
The URI to use to set a config option is a bit arcane to write/remember
and checking if the setting was successful doubly so.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
|
|
|
|
|
|
Git-Dch: Ignore
|
|
Servers might respond with a complete file either because they don't
support Ranges at all or the If-Range condition isn't statisfied, so we
have to parse the headers curl gets ourself to seek or truncate the file
we have so far.
This also finially adds the testcase testing a bunch of partial
situations for both, http and https - which is now all green.
Closes: 617643, 667699
LP: 1157943
|
|
Compressing files in 4 different styles eats test-time for no practical
gain if we don't test them explicitly, so default to just building 'gz'
compressed files as it is the simplest compression algorithm supported
Git-Dch: Ignore
|
|
Looks like the travis service runs on Ubuntu in a version which has dpkg
with an earlier interface implementation, so lets try if we can't make
the framework work with this dpkg version as well.
Git-Dch: Ignore
|
|
In bugreport deb:719629 Paul Wise mentions both to enable some malloc
checks and as more testing can't hurt we enable both for all testcases.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
First redirect output to a file, then redirect other outputs to this
output, not the other way around as this will not work.
Git-Dch: Ignore
|
|
For many commands the output isn't stable (like then dpkg is called) but
the exitcode is, so this helper enhances the common && msgpass ||
msgfail by generating automatically a msgtest and showing the output of
the command in case of failure instead of discarding it unconditionally,
the later being chronic-like behaviour
Git-Dch: Ignore
|
|
Signing files with expired keys is not as easy as it sounds, so the
framework jumps a few loops to do it, but it might come in handy to have
an expired key around for later tests even if it is not that different
from having no key in regards to APT behaviour.
Git-Dch: Ignore
|
|
Forking only after being ready to accept clients avoids running races
with the tests which sometimes failed on the first 'apt-get update'
(or similar) with the previous background-start and hope for the best…
The commit fixes also some oversight output-order changes in regards to
Description-md5 and (I-M-S) race conditions in various tests.
Git-Dch: Ignore
|
|
With the selfgrown splitting we got the problem of not recovering
from networks which just reply with invalid data like those sending
us login pages to authenticate with the network (e.g. hotels) back.
The good thing about the InRelease file is that we know that it must
be clearsigned (a Release file might or might not have a detached sig)
so if we get a file but are unable to split it something is seriously
wrong, so there is not much point in trying further.
The Acquire system already looks out for a NODATA error from gpgv,
so this adds a new error message sent to the acquire system in case
the splitting we do now ourselves failed including this magic word.
Closes: #712486
|
|
Git-Dch: Ignore
|
|
APT needs to acquire data in a secure fashion over an inherently
unsecure way, known as the internet, while communicating with
unreliable partners, known as webservers and proxies.
For your integration tests we so far relied on 'normal' webservers,
but all of them have certain quirks and none is able to provide us
with all quirks which can be observed in the wild and we therefore
have to test with, so this webserver isn't trying to be fast, secure
or feature complete, but to provide all the quirks we need in a
consistent way.
This webserver also makes the APT project self-contained, as it is now
able to generate, serve as well as acquire package indexes. ;)
Git-Dch: Ignore
|
|
We do the same in the acquire system which handles the 'normal'
downloads, so do it here as well even though its unlikely anyone
will ever notice (beside testcases of course …)
|
|
For testcases it might sometimes be handy to add trap-actions
before the general cleanup, e.g. if it has set directories read-
only which rm doesn't want to remove even with --force applied
(its fine with files though)
Git-Dch: Ignore
|
|
Patterns can appear in the name as well as in the description,
they don't have to match all in the name/description only.
Closes: 691453
|
|
|
|
apt-pkg/deb/deblistparser.cc:
- use OpenMaybeClearSignedFile to be free from detecting and
skipping clearsigning metadata in dsc and Release files
We can't write a "clean" file to disk as not all acquire methods copy
Release files before checking them (e.g. cdrom), so this reverts recombining,
but uses the method we use for dsc files also in the two places we
deal with Release files
|
