summaryrefslogtreecommitdiff
path: root/test/integration/framework
AgeCommit message (Collapse)Author
2015-11-04support arch:all data e.g. in separate Packages fileDavid Kalnischkies
Based on a discussion with Niels Thykier who asked for Contents-all this implements apt trying for all architecture dependent files to get a file for the architecture all, which is treated internally now as an official architecture which is always around (like native). This way arch:all data can be shared instead of duplicated for each architecture requiring the user to download the same information again and again. There is one problem however: In Debian there is already a binary-all/ Packages file, but the binary-any files still include arch:all packages, so that downloading this file now would be a waste of time, bandwidth and diskspace. We therefore need a way to decide if it makes sense to download the all file for Packages in Debian or not. The obvious answer would be a special flag in the Release file indicating this, which would need to default to 'no' and every reasonable repository would override it to 'yes' in a few years time, but the flag would be there "forever". Looking closer at a Release file we see the field "Architectures", which doesn't include 'all' at the moment. With the idea outlined above that 'all' is a "proper" architecture now, we interpret this field as being authoritative in declaring which architectures are supported by this repository. If it says 'all', apt will try to get all, if not it will be skipped. This gives us another interesting feature: If I configure a source to download armel and mips, but it declares it supports only armel apt will now print a notice saying as much. Previously this was a very cryptic failure. If on the other hand the repository supports mips, too, but for some reason doesn't ship mips packages at the moment, this 'missing' file is silently ignored (= that is the same as the repository including an empty file). The Architectures field isn't mandatory through, so if it isn't there, we assume that every architecture is supported by this repository, which skips the arch:all if not listed in the release file.
2015-11-04disable updating insecure repositories in apt by defaultDavid Kalnischkies
apt is an interactive command and the reasons we haven't this option set for everything is mostly in keeping compatibility for a little while longer to allow scripts to be changed if need be.
2015-11-04refer to apt-secure(8) in unsecure repositories warningDavid Kalnischkies
The manpage is also slightly updated to work better as a central hub to push people from all angles into the right directions without writting a book disguised as an error message.
2015-11-04rework errors and warnings around insecure repositoriesDavid Kalnischkies
Insecure (aka unsigned) repositories are bad, period. We want to get right of them finally and as a first step we are printing scary warnings. This is already done, this commit just changes the messages to be more consistent and prevents them from being displayed if authenticity is guaranteed some other way (as indicated with trusted=yes). The idea is to first print the pure fact like "repository isn't signed" as a warning (and later as an error), while giving an explaination in a immediately following notice (which is displayed only in quiet level 0: so in interactive use, not in scripts and alike). Closes: 796549
2015-11-04unbreak the copy-method claiming hashsum mismatch since ~exp9David Kalnischkies
Commit 653ef26c70dc9c0e2cbfdd4e79117876bb63e87d broke the camels back in sofar that everything works in terms of our internal use of copy:/, but external use is completely destroyed. This is kinda the reverse of what happened in "parallel" in the sid branch, where external use was mostly fine, internal and external exploded on the GzipIndexes option. We fix this now by rewriting our internal use by letting copy:/ only do what the name suggests it does: Copy files and not uncompress them on-the-fly. Then we teach copy and the uncompressors how to deal with /dev/null and use it as destination file in case we don't want to store the uncompressed files on disk. Closes: 799158
2015-09-15tests: add a -j $jobs mode to test runner for parallel executionDavid Kalnischkies
Now that tests can be run in parallel, lets actually do it… The mode has some downsides like not collecting the failed tests, but it can be a lot faster than a sequential run and is therefore a good alternative in testing those "this shouldn't break anything" changes (which tend to break everything if untested). Git-Dch: Ignore
2015-09-15tests: don't use hardcoded port for http and httpsDavid Kalnischkies
This allows running tests in parallel. Git-Dch: Ignore
2015-09-14tests: try to support spaces in TMPDIRDavid Kalnischkies
Not all tests work yet, most notable the cdrom tests, but those require changes in libapt itself to have a proper fix and what we have fixed so far is good enough progress for now. Git-Dch: Ignore
2015-09-14tests: use SHA1 checksum only by default in testsDavid Kalnischkies
This is mostly a small speedup for the testcases, but it is also handy to document which tests actually deal with a specific hash compared to those which 'just' need some hash which can be important while adding new hashes. Git-Dch: Ignore
2015-09-14various changes to increase test-coverageDavid Kalnischkies
And of course, testing obscure things ends up showing obscure 'bugs' or better shortcomings/inconsitencies, so lets fix them with the tests. Git-Dch: Ignore
2015-09-14select kernels to protect from autoremove based on Debian versionDavid Kalnischkies
This is basically a rewrite of the script with the general idea of finding the Debian version of the installed kernels – as multiple flavours will have the same Debian version – select the two newest of them and translate them back to versions found in package names. This way we avoid e.g. kernel and kernel-rt to use up the protected slots even through they are basically the same kernel (just a different flavour) so it is likely that if kernel doesn't work for some reason, kernel-rt will not either. This also deals with foreign kernel packages, kernels on hold and partly installed kernels (in case multiple kernels are installed in the same apt run) in a hopefully sensible way. Closes: 787827
2015-09-14tests: allow to run (selfbuilt) dpkg under gdbDavid Kalnischkies
Git-Dch: Ignore
2015-09-14tests: refactor printing of the quiet failure headerDavid Kalnischkies
Git-Dch: Ignore
2015-09-14tests: store msgmsg message for display in fail as wellDavid Kalnischkies
Git-Dch: Ignore
2015-09-02tests: collect more details about failed checkdiffsDavid Kalnischkies
Git-Dch: Ignore
2015-09-01Consider md5sum no longer a usable hashMichael Vogt
The md5sum hash is broken since some time and we should no longer consider it a usable hash. Also update the tests to reflect this.
2015-08-31test: show the highlevel test for lowerranking onesDavid Kalnischkies
testsuccess checks the return code, but it does also some autotests based on the command like grepping for dpkg warnings in a apt-get install call – but if this finds something it is just showing the grep command. With this change it will additionally show the first msgtest which in this case will detail the actual apt-get install call. Git-Dch: Ignore
2015-08-31tests: store msgtest in -q mode for display in msgfailDavid Kalnischkies
Not-quiet output is very verbose and with our growing array of tests generates many many lines which e.g. kills the log display in travis-ci and obscures failures and uncatched output in a wall of details. The -q mode fixed this by callapsing passed tests to a single P and now with some rework we can even get failures properly displayed with the message from msgtest. Git-Dch: Ignore
2015-08-27allow explicit dis/enable of IndexTargets in sources optionsDavid Kalnischkies
While Target{,-Add,-Remove} is available for configuring IndexTargets already, allow Targets to be mentioned explicitely as yes/no options as well, so that the Target 'Contents' can be disabled via 'Contents: no' as well as 'Target-Remove: Contents'.
2015-08-27fix various typos reported by codespellDavid Kalnischkies
Reported-By: codespell
2015-08-18Add support for "apt-cache showsrc --only-source srcpkgname"Michael Vogt
Thanks: Steve Slangasek for the suggestion Closes: 695633
2015-08-12travis: add ppa:ubuntu-toolschain-r/test as source for gcc-5David Kalnischkies
This makes travis-ci able to run our tests again. Sometimes. If it doesn't spontaneously fails with internal gcc errors… Git-Dch: Ignore
2015-08-10move APT::Never-MarkAuto-Sections handling to MarkDeleteDavid Kalnischkies
Having the handling in MarkInstall means that it just effects installation of the metapackage, but if the dependencies change the new dependencies aren't protected (and the old dependencies are still protected for no 'reason'). Having it in MarkDelete means that if a metapackage is sheduled for removal all its currently installed dependencies are marked as manual, which helps against both as in this case there is no new/old and additionally if a user decides the installation of a metapackage was wrong he can just remove it explicitely avoid the manual marking entirely.
2015-08-10mark again deps of pkgs in APT::Never-MarkAuto-Sections as manualDavid Kalnischkies
In 50ef3344c3afaaf9943142906b2f976a0337d264 (and similar for other branches), while 'fixing' the edgecase of a package being in multiple sections (e.g. moved from libs to oldlibs in newer releases) I accidently broke the feature itself completely by operating on the package itself and no longer on its dependencies… The behaviour isn't ideal in multiple ways, which we are hopefully able to fix with new ideas as mentioned in the buglog, but until then the functionality of this "hack" should be restored. Reported-By: Raphaël Hertzog <hertzog@debian.org> Tested-By: Adam Conrad <adconrad@ubuntu.com> Closes: 793360 LP: 1479207 Thanks: Raphaël Hertzog and Adam Conrad for detailed reports and initial patches
2015-08-10elimate duplicated code in pkgIndexFile subclassesDavid Kalnischkies
Trade deduplication of code for a bunch of new virtuals, so it is actually visible how the different indexes behave cleaning up the interface at large in the process. Git-Dch: Ignore
2015-08-10add volatile sources support in libapt-pkgDavid Kalnischkies
Sources are usually defined in sources.list (and co) and are pretty stable, but once in a while a frontend might want to add an additional "source" like a local .deb file to install this package (No support for 'real' sources being added this way as this is a multistep process). We had a hack in place to allow apt-get and apt to pull this of for a short while now, but other frontends are either left in the cold by this and/or the code for it looks dirty with FIXMEs plastering it and has on top of this also some problems (like including these 'volatile' sources in the srcpkgcache.bin file). So the biggest part in this commit is actually the rewrite of the cache generation as it is now potentially a three step process. The biggest problem with adding support now through is that this makes a bunch of previously mostly unusable by externs and therefore hidden classes public, so a bit of further tuneing on this now public API is in order…
2015-08-10implement Signed-By option for sources.listDavid Kalnischkies
Limits which key(s) can be used to sign a repository. Not immensely useful from a security perspective all by itself, but if the user has additional measures in place to confine a repository (like pinning) an attacker who gets the key for such a repository is limited to its potential and can't use the key to sign its attacks for an other (maybe less limited) repository… (yes, this is as weak as it sounds, but having the capability might come in handy for implementing other stuff later).
2015-08-10fix memory leaks reported by -fsanitizeDavid Kalnischkies
Various small leaks here and there. Nothing particularily big, but still good to fix. Found by the sanitizers while running our testcases. Reported-By: gcc -fsanitize Git-Dch: Ignore
2015-06-15allow ratelimiting progress reporting for testcasesDavid Kalnischkies
Progress reports once in a while which is a bit to unpredictable for testcases, so we enforce a steady progress for them in the hope that this makes the tests (mostly test-apt-progress-fd) a bit more stable. Git-Dch: Ignore
2015-06-15condense parallel requests with the same hashes to oneDavid Kalnischkies
It shouldn't be too common, but sometimes people have multiple mirrors in the sources or otherwise repositories with the same content. Now that we gracefully can handle multiple requests to the same URI, we can also fold multiple requests with the same expected hashes into one. Note that this isn't trying to find oppertunities for merging, but just merges if it happens to encounter the oppertunity for it. This is most obvious in the new testcase actually as it needs to delay the action to give the acquire system enough time to figure out that they can be merged.
2015-06-15provide a public interface for acquiring changelogsDavid Kalnischkies
Provided is a specialized acquire item which given a version can figure out the correct URI to try by itself and if not provides an error message alongside with static methods to get just the URI it would try to download if it should just be displayed or similar such. The URI is constructed as follows: Release files can provide an URI template in the "Changelogs" field, otherwise we lookup a configuration item based on the "Label" or "Origin" of the Release file to get a (hopefully known) default value for now. This template should contain the string CHANGEPATH which is replaced with the information about the version we want the changelog for (e.g. main/a/apt/apt_1.1). This middleway was choosen as this path part was consistent over the three known implementations (+1 defunct), while the rest of the URI varies widely between them. The benefit of this construct is that it is now easy to get changelogs for Debian packages on Ubuntu and vice versa – even at the moment where the Changelogs field is present nowhere. Strictly better than what apt-get had before as it would even fail to get changelogs from security… Now it will notice that security identifies as Origin: Debian and pick this setting (assuming again that no Changelogs field exists). If on the other hand security would ship its changelogs in a different location we could set it via the Label option overruling Origin. Closes: 687147, 739854, 784027, 787190
2015-06-12store Release files data in the CacheDavid Kalnischkies
We used to read the Release file for each Packages file and store the data in the PackageFile struct even through potentially many Packages (and Translation-*) files could use the same data. The point of the exercise isn't the duplicated data through. Having the Release files as first-class citizens in the Cache allows us to properly track their state as well as allows us to use the information also for files which aren't in the cache, but where we know to which Release file they belong (Sources are an example for this). This modifies the pkgCache structs, especially the PackagesFile struct which depending on how libapt users access the data in these structs can mean huge breakage or no visible change. As a single data point: aptitude seems to be fine with this. Even if there is breakage it is trivial to fix in a backportable way while avoiding breakage for everyone would be a huge pain for us. Note that not all PackageFile structs have a corresponding ReleaseFile. In particular the dpkg/status file as well as *.deb files have not. As these have only a Archive property need, the Component property takes over this duty and the ReleaseFile remains zero. This is also the reason why it isn't needed nor particularily recommended to change from PackagesFile to ReleaseFile blindly. Sticking with the earlier is usually the better option.
2015-06-10abstract the code to iterate over all targets a bitDavid Kalnischkies
We have two places in the code which need to iterate over targets and do certain things with it. The first one is actually creating these targets for download and the second instance pepares certain targets for reading. Git-Dch: Ignore
2015-06-09do not request files if we expect an IMS hitDavid Kalnischkies
If we have a file on disk and the hashes are the same in the new Release file and the old one we have on disk we know that if we ask the server for the file, we will at best get an IMS hit – at worse the server doesn't support this and sends us the (unchanged) file and we have to run all our checks on it again for nothing. So, we can save ourselves (and the servers) some unneeded requests if we figure this out on our own.
2015-05-18treat older Release files than we already have as an IMSHitDavid Kalnischkies
Valid-Until protects us from long-living downgrade attacks, but not all repositories have it and an attacker could still use older but still valid files to downgrade us. While this makes it sounds like a security improvement now, its a bit theoretical at best as an attacker with capabilities to pull this off could just as well always keep us days (but in the valid period) behind and always knows which state we have, as we tell him with the If-Modified-Since header. This is also why this is 'silently' ignored and treated as an IMSHit rather than screamed at the user as this can at best be an annoyance for attackers. An error here would 'regularily' be encountered by users by out-of-sync mirrors serving a single run (e.g. load balancer) or in two consecutive runs on the other hand, so it would just help teaching people ignore it. That said, most of the code churn is caused by enforcing this additional requirement. Crisscross from InRelease to Release.gpg is e.g. very unlikely in practice, but if we would ignore it an attacker could sidestep it this way.
2015-05-13detect Releasefile IMS hits even if the server doesn'tDavid Kalnischkies
Not all servers we are talking to support If-Modified-Since and some are not even sending Last-Modified for us, so in an effort to detect such hits we run a hashsum check on the 'old' compared to the 'new' file, we got the hashes for the 'new' already for "free" from the methods anyway and hence just need to calculated the old ones. This allows us to detect hits even with unsupported servers, which in turn means we benefit from all the new hit behavior also here.
2015-05-12detect 416 complete file in partial by expected hashDavid Kalnischkies
If we have the expected hashes we can check with them if the file we have in partial we got a 416 for is the expected file. We detected this with same-size before, but not every server sends a good Content-Range header with a 416 response.
2015-05-11sync TFRewrite*Order arrays with dpkg and dakDavid Kalnischkies
dpkg and dak know various field names and order them in their output, while we have yet another order and have to play catch up with them as we are sitting between chairs here and neither order is ideal for us, too. A little testcase is from now on supposed to help ensureing that we do not derivate to far away from which fields dpkg knows and orders.
2015-05-11improve partial/ cleanup in abort and failure casesDavid Kalnischkies
Especially pdiff-enhanced downloads have the tendency to fail for various reasons from which we can recover and even a successful download used to leave the old unpatched index in partial/. By adding a new method responsible for making the transaction of an individual file happen we can at specialisations especially for abort cases to deal with the cleanup. This also helps in keeping the compressed indexes around if another index failed instead of keeping the decompressed files, which we wouldn't pick up in the next call.
2015-04-19a hit on Release files means the indexes will be hits tooDavid Kalnischkies
If we get a IMSHit for the Transaction-Manager (= the InRelease file or as its still supported fallback Release + Release.gpg combo) we can assume that every file we would queue based on this manager, but already have locally is current and hence would get an IMSHit, too. We therefore save us and the server the trouble and skip the queuing in this case. Beside speeding up repetative executions of 'apt-get update' this way we also avoid hitting hashsum errors if the indexes are in fact already updated, but the Release file isn't yet as it is the case on well behaving mirrors as Release files is updated last. The implementation is a bit harder than the theory makes it sound as we still have to keep reverifying the Release files (e.g. to detect now expired once to avoid an attacker being able to silently stale us) and have to handle cases in which the Release file hits, but some indexes aren't present (e.g. user added a new foreign architecture).
2015-04-19ensure lists/ files have correct permissions after apt-cdrom addDavid Kalnischkies
Its a bit unpredictable which permissons and owners we will encounter on a CD-ROM (or a USB stick, as apt-cdrom is responsible for those too), so we have to ensure in this codepath as well that everything is nicely setup without waiting for a 'apt-get update' to fix up the (potential) mess.
2015-04-19send Alt-* info for uncompressed based on any compressionsDavid Kalnischkies
file sends information about the uncompressed file if it can find it as well as for the compressed file. This was done only for gzip so far, but we support more compression types. That this information isn't used a lot is a different story. Git-Dch: Ignore
2015-04-19improve https method queue progress reportingDavid Kalnischkies
The worker expects that the methods tell him when they start or finish downloading a file. Various information pieces are passed along in this report including the (expected) filesize. https was using a "global" struct for reporting which made it 'reuse' incorrect values in some cases like a non-existent InRelease fallbacking to Release{,.gpg} resulting in a size-mismatch warning. Reducing the scope and redesigning the setting of the values we can fix this and related issues. Closes: 777565, 781509 Thanks: Robert Edmonds and Anders Kaseorg for initial patchs
2015-03-16test exitcode as well as string equalityDavid Kalnischkies
We use test{success,failure} now all over the place in the framework, so its only consequencial to do this in the situations in which we test for a specific output as well. Git-Dch: Ignore
2015-03-16merge debian/sid into debian/experimentalDavid Kalnischkies
2015-03-08rework dpkg-wrapping in test frameworkDavid Kalnischkies
We are able to run maintainer scripts if needed before, but we need to set ADMINDIR to be able to call dpkg tools like dpkg-trigger inside of them. Git-Dch: Ignore
2015-01-10128 KiB DSC files ought to be enough for everyoneDavid Kalnischkies
Your mileage may vary, but don't worry: There is more than one way to do it, but our one size fits all is not a bigger hammer, but an entire roundhouse kick! So brace yourself for the tl;dr: The limit is gone.* Beware: This fixes also the problem that a double newline is unconditionally added 'later' which is an overcommitment in case the dsc filesize is limit-2 <= x <= limit. * limited to numbers fitting into an unsigned long long. Closes: 774893
2014-12-23always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Note that dpkg currently has a workaround implemented to allow upgrades to jessie to be clean, so that the test works before and after. Also note that test (compared to the one in the bug) drops the await test as its is considered a loop by dpkg now. Closes: 769609
2014-12-23do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-22dispose http(s) 416 error page as non-contentDavid Kalnischkies
Real webservers (like apache) actually send an error page with a 416 response, but our client didn't expect it leaving the page on the socket to be parsed as response for the next request (http) or as file content (https), which isn't what we want at all… Symptom is a "Bad header line" as html usually doesn't parse that well to an http-header. This manifests itself e.g. if we have a complete file (or larger) in partial/ which isn't discarded by If-Range as the server doesn't support it (or it is just newer, think: mirror rotation). It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a, which removed the filesize - 1 trick, but this had its own problems… To properly test this our webserver gains the ability to reply with transfer-encoding: chunked as most real webservers will use it to send the dynamically generated error pages. (The tests and their binary helpers had to be slightly modified to apply, but the patch to fix the issue itself is unchanged.) Closes: 768797