| Age | Commit message (Collapse) | Author |
|---|
|
This doesn't allow all tests to run cleanly, but it at least allows to
write tests which could run successfully in such environments.
Git-Dch: Ignore
|
|
Use asprintf() so we have easy error detection and do not depend
on PATH_MAX.
Do not add another separator to the generated path, in both cases
the path inside the chroot is guaranteed to have a leading /
already.
Also pass -Wall to gcc.
|
|
This caused test-bug-717891-abolute-uris-for-proxies to fail
Gbp-Dch: ignore
|
|
This breaks a lot of test cases
Gbp-Dch: ignore
|
|
The allocated buffer was one byte too small. Allocate a buffer
of PATH_MAX instead and use snprintf(), as suggested by Martin
Pitt.
|
|
Trying to clean up directories which do not exist seems rather silly if
you think about it, so let apt think about it and stop it.
Depends a bit on the caller if this is fixing anything for them as they
might try to acquire a lock or doing other clever things as apt does.
Closes: 807477
|
|
If we can't work with the hashes we parsed from the Release file we
display now an error message if the Release file includes only weak
hashes instead of downloading the indexes and failing to verify them
with "Hash Sum mismatch" even through the hashes didn't mismatch (they
were just weak).
If for some (unlikely) reason we have got weak hashes only for
individual targets we will show a warning to this effect (again, befor
downloading and failing the index itself).
Closes: 806459
|
|
which is a debian specific tool packaged in debianutils (essential)
while command is a shell builtin defined by POSIX.
Closes: 807144
Thanks: Mingye Wang for the suggestion.
|
|
Git-Dch: Ignore
|
|
Dropping privileges is an involved process for code and system alike so
ideally we want to verify that all the work wasn't in vain. Stuff
designed to sidestep the usual privilege checks like fakeroot (and its
many alternatives) have their problem with this through, partly through
missing wrapping (#806521), partly as e.g. regaining root from an
unprivileged user is in their design. This commit therefore disables
most of these checks by default so that apt runs fine again in a
fakeroot environment.
Closes: 806475
|
|
debci seems to have a cleaner environment now and even if not we could
never guess nogroup, so figure it out properly via 'id'.
Git-Dch: Ignore
|
|
In ce1f3a2c we started warning about failing unlinking, which we
consistently do for directories. That isn't a problem as directories
usually aren't in the places we do want to clean up – with the potential
exeception of "lost+found", so lets ignore it like we ignore our own
partial/ subdirectory.
Closes: 805424
|
|
Git-Dch: Ignore
|
|
space-gapping: '-o option= value'
That is a very old feature (straight from 1998), but it is super
surprising if you try setting empty values and instead get error
messages or a non-empty value as the next parameter is treated as the
value – which could have been empty, so if for some reason you need a
compatible way of setting an empty value try: '-o option="" ""'.
I can only guess that the idea was to support '-o option value', but we
survived 17 years without it, we will do fine in the future I guess.
Similar is the case for '-t= testing' even through '-t testing' existed
before and the code even tried to detect mistakes like '-t= -b' … all
gone now.
Technically that is as its removing a feature replacing it with another
a major interface break. In practice I really hope for my and their
sanity that nobody was using this; but if for some reaon you do: Remove
the space and be done.
I found the patch and the bugreport actually only after the fact, but
its reassuring that others are puzzled by this as well and hence a
thanks is in perfect order here as the patch is practical identical
[expect that this one here adds tests and other bonus items].
Thanks: Daniel Hartwig for initial patch.
Closes: 693092
|
|
Notices are just hints, but if they are printed in tests, they should be
expected and if not the test should fail. No current test has this
problem, so that is just potential future proving.
Git-Dch: Ignore
|
|
Allows users who know what they are getting themselves into with this
trick to e.g. disable privilege dropping for e.g. file:// until they can
fix up the permissions on those repositories. It helps also the test
framework and people with a similar setup (= me) to run in less modified
environments.
|
|
This flags is generally handy to avoid having to deal with ipv6 results on an
ipv4-only system, but it prevents e.g. the testcases from working if the
testsystem has no configured address at the moment (expect loopback), so
allow it to be sidestepped and let the testcases sidestep it.
Git-Dch: Ignore
|
|
Based on a discussion with Niels Thykier who asked for Contents-all this
implements apt trying for all architecture dependent files to get a file
for the architecture all, which is treated internally now as an official
architecture which is always around (like native). This way arch:all
data can be shared instead of duplicated for each architecture requiring
the user to download the same information again and again.
There is one problem however: In Debian there is already a binary-all/
Packages file, but the binary-any files still include arch:all packages,
so that downloading this file now would be a waste of time, bandwidth
and diskspace. We therefore need a way to decide if it makes sense to
download the all file for Packages in Debian or not. The obvious answer
would be a special flag in the Release file indicating this, which would
need to default to 'no' and every reasonable repository would override
it to 'yes' in a few years time, but the flag would be there "forever".
Looking closer at a Release file we see the field "Architectures", which
doesn't include 'all' at the moment. With the idea outlined above that
'all' is a "proper" architecture now, we interpret this field as being
authoritative in declaring which architectures are supported by this
repository. If it says 'all', apt will try to get all, if not it will be
skipped. This gives us another interesting feature: If I configure a
source to download armel and mips, but it declares it supports only
armel apt will now print a notice saying as much. Previously this was a
very cryptic failure. If on the other hand the repository supports mips,
too, but for some reason doesn't ship mips packages at the moment, this
'missing' file is silently ignored (= that is the same as the repository
including an empty file).
The Architectures field isn't mandatory through, so if it isn't there,
we assume that every architecture is supported by this repository, which
skips the arch:all if not listed in the release file.
|
|
apt is an interactive command and the reasons we haven't this option set
for everything is mostly in keeping compatibility for a little while
longer to allow scripts to be changed if need be.
|
|
The manpage is also slightly updated to work better as a central hub to
push people from all angles into the right directions without writting a
book disguised as an error message.
|
|
Insecure (aka unsigned) repositories are bad, period. We want to get
right of them finally and as a first step we are printing scary
warnings. This is already done, this commit just changes the messages to
be more consistent and prevents them from being displayed if
authenticity is guaranteed some other way (as indicated with
trusted=yes).
The idea is to first print the pure fact like "repository isn't signed"
as a warning (and later as an error), while giving an explaination in a
immediately following notice (which is displayed only in quiet level 0:
so in interactive use, not in scripts and alike).
Closes: 796549
|
|
Commit 653ef26c70dc9c0e2cbfdd4e79117876bb63e87d broke the camels back in
sofar that everything works in terms of our internal use of copy:/, but
external use is completely destroyed. This is kinda the reverse of what
happened in "parallel" in the sid branch, where external use was mostly
fine, internal and external exploded on the GzipIndexes option.
We fix this now by rewriting our internal use by letting copy:/ only do
what the name suggests it does: Copy files and not uncompress them
on-the-fly. Then we teach copy and the uncompressors how to deal with
/dev/null and use it as destination file in case we don't want to store
the uncompressed files on disk.
Closes: 799158
|
|
Now that tests can be run in parallel, lets actually do it… The mode has
some downsides like not collecting the failed tests, but it can be a lot
faster than a sequential run and is therefore a good alternative in
testing those "this shouldn't break anything" changes (which tend to
break everything if untested).
Git-Dch: Ignore
|
|
This allows running tests in parallel.
Git-Dch: Ignore
|
|
Not all tests work yet, most notable the cdrom tests, but those require
changes in libapt itself to have a proper fix and what we have fixed so
far is good enough progress for now.
Git-Dch: Ignore
|
|
This is mostly a small speedup for the testcases, but it is also handy
to document which tests actually deal with a specific hash compared to
those which 'just' need some hash which can be important while adding
new hashes.
Git-Dch: Ignore
|
|
And of course, testing obscure things ends up showing obscure 'bugs' or
better shortcomings/inconsitencies, so lets fix them with the tests.
Git-Dch: Ignore
|
|
This is basically a rewrite of the script with the general idea of
finding the Debian version of the installed kernels – as multiple
flavours will have the same Debian version – select the two newest of
them and translate them back to versions found in package names.
This way we avoid e.g. kernel and kernel-rt to use up the protected
slots even through they are basically the same kernel (just a different
flavour) so it is likely that if kernel doesn't work for some reason,
kernel-rt will not either.
This also deals with foreign kernel packages, kernels on hold and partly
installed kernels (in case multiple kernels are installed in the same
apt run) in a hopefully sensible way.
Closes: 787827
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
The md5sum hash is broken since some time and we should no longer
consider it a usable hash. Also update the tests to reflect this.
|
|
testsuccess checks the return code, but it does also some autotests
based on the command like grepping for dpkg warnings in a apt-get
install call – but if this finds something it is just showing the grep
command. With this change it will additionally show the first msgtest
which in this case will detail the actual apt-get install call.
Git-Dch: Ignore
|
|
Not-quiet output is very verbose and with our growing array of tests
generates many many lines which e.g. kills the log display in travis-ci
and obscures failures and uncatched output in a wall of details.
The -q mode fixed this by callapsing passed tests to a single P and now
with some rework we can even get failures properly displayed with the
message from msgtest.
Git-Dch: Ignore
|
|
While Target{,-Add,-Remove} is available for configuring IndexTargets
already, allow Targets to be mentioned explicitely as yes/no options as
well, so that the Target 'Contents' can be disabled via 'Contents: no'
as well as 'Target-Remove: Contents'.
|
|
Reported-By: codespell
|
|
Thanks: Steve Slangasek for the suggestion
Closes: 695633
|
|
This makes travis-ci able to run our tests again.
Sometimes.
If it doesn't spontaneously fails with internal gcc errors…
Git-Dch: Ignore
|
|
Having the handling in MarkInstall means that it just effects
installation of the metapackage, but if the dependencies change the new
dependencies aren't protected (and the old dependencies are still
protected for no 'reason'). Having it in MarkDelete means that if a
metapackage is sheduled for removal all its currently installed
dependencies are marked as manual, which helps against both as in this
case there is no new/old and additionally if a user decides the
installation of a metapackage was wrong he can just remove it
explicitely avoid the manual marking entirely.
|
|
In 50ef3344c3afaaf9943142906b2f976a0337d264 (and similar for other
branches), while 'fixing' the edgecase of a package being in multiple
sections (e.g. moved from libs to oldlibs in newer releases) I
accidently broke the feature itself completely by operating on the
package itself and no longer on its dependencies…
The behaviour isn't ideal in multiple ways, which we are hopefully able
to fix with new ideas as mentioned in the buglog, but until then the
functionality of this "hack" should be restored.
Reported-By: Raphaël Hertzog <hertzog@debian.org>
Tested-By: Adam Conrad <adconrad@ubuntu.com>
Closes: 793360
LP: 1479207
Thanks: Raphaël Hertzog and Adam Conrad for detailed reports and initial patches
|
|
Trade deduplication of code for a bunch of new virtuals, so it is
actually visible how the different indexes behave cleaning up the
interface at large in the process.
Git-Dch: Ignore
|
|
Sources are usually defined in sources.list (and co) and are pretty
stable, but once in a while a frontend might want to add an additional
"source" like a local .deb file to install this package (No support for
'real' sources being added this way as this is a multistep process).
We had a hack in place to allow apt-get and apt to pull this of for a
short while now, but other frontends are either left in the cold by this
and/or the code for it looks dirty with FIXMEs plastering it and has on
top of this also some problems (like including these 'volatile' sources
in the srcpkgcache.bin file).
So the biggest part in this commit is actually the rewrite of the cache
generation as it is now potentially a three step process. The biggest
problem with adding support now through is that this makes a bunch of
previously mostly unusable by externs and therefore hidden classes
public, so a bit of further tuneing on this now public API is in order…
|
|
Limits which key(s) can be used to sign a repository. Not immensely useful
from a security perspective all by itself, but if the user has
additional measures in place to confine a repository (like pinning) an
attacker who gets the key for such a repository is limited to its
potential and can't use the key to sign its attacks for an other (maybe
less limited) repository… (yes, this is as weak as it sounds, but having
the capability might come in handy for implementing other stuff later).
|
|
Various small leaks here and there. Nothing particularily big, but still
good to fix. Found by the sanitizers while running our testcases.
Reported-By: gcc -fsanitize
Git-Dch: Ignore
|
|
Progress reports once in a while which is a bit to unpredictable for
testcases, so we enforce a steady progress for them in the hope that
this makes the tests (mostly test-apt-progress-fd) a bit more stable.
Git-Dch: Ignore
|
|
It shouldn't be too common, but sometimes people have multiple mirrors
in the sources or otherwise repositories with the same content. Now that
we gracefully can handle multiple requests to the same URI, we can also
fold multiple requests with the same expected hashes into one. Note that
this isn't trying to find oppertunities for merging, but just merges if
it happens to encounter the oppertunity for it.
This is most obvious in the new testcase actually as it needs to delay
the action to give the acquire system enough time to figure out that
they can be merged.
|
|
Provided is a specialized acquire item which given a version can figure
out the correct URI to try by itself and if not provides an error
message alongside with static methods to get just the URI it would try
to download if it should just be displayed or similar such.
The URI is constructed as follows:
Release files can provide an URI template in the "Changelogs" field,
otherwise we lookup a configuration item based on the "Label" or
"Origin" of the Release file to get a (hopefully known) default value
for now. This template should contain the string CHANGEPATH which is
replaced with the information about the version we want the changelog
for (e.g. main/a/apt/apt_1.1). This middleway was choosen as this path
part was consistent over the three known implementations (+1 defunct),
while the rest of the URI varies widely between them.
The benefit of this construct is that it is now easy to get changelogs
for Debian packages on Ubuntu and vice versa – even at the moment where
the Changelogs field is present nowhere. Strictly better than what
apt-get had before as it would even fail to get changelogs from
security… Now it will notice that security identifies as Origin: Debian
and pick this setting (assuming again that no Changelogs field exists).
If on the other hand security would ship its changelogs in a different
location we could set it via the Label option overruling Origin.
Closes: 687147, 739854, 784027, 787190
|
|
We used to read the Release file for each Packages file and store the
data in the PackageFile struct even through potentially many Packages
(and Translation-*) files could use the same data. The point of the
exercise isn't the duplicated data through. Having the Release files as
first-class citizens in the Cache allows us to properly track their
state as well as allows us to use the information also for files which
aren't in the cache, but where we know to which Release file they
belong (Sources are an example for this).
This modifies the pkgCache structs, especially the PackagesFile struct
which depending on how libapt users access the data in these structs can
mean huge breakage or no visible change. As a single data point:
aptitude seems to be fine with this. Even if there is breakage it is
trivial to fix in a backportable way while avoiding breakage for
everyone would be a huge pain for us.
Note that not all PackageFile structs have a corresponding ReleaseFile.
In particular the dpkg/status file as well as *.deb files have not. As
these have only a Archive property need, the Component property takes
over this duty and the ReleaseFile remains zero. This is also the reason
why it isn't needed nor particularily recommended to change from
PackagesFile to ReleaseFile blindly. Sticking with the earlier is
usually the better option.
|
|
We have two places in the code which need to iterate over targets and do
certain things with it. The first one is actually creating these targets
for download and the second instance pepares certain targets for
reading.
Git-Dch: Ignore
|
