summaryrefslogtreecommitdiff
path: root/test/integration/framework
AgeCommit message (Collapse)Author
2015-05-18treat older Release files than we already have as an IMSHitDavid Kalnischkies
Valid-Until protects us from long-living downgrade attacks, but not all repositories have it and an attacker could still use older but still valid files to downgrade us. While this makes it sounds like a security improvement now, its a bit theoretical at best as an attacker with capabilities to pull this off could just as well always keep us days (but in the valid period) behind and always knows which state we have, as we tell him with the If-Modified-Since header. This is also why this is 'silently' ignored and treated as an IMSHit rather than screamed at the user as this can at best be an annoyance for attackers. An error here would 'regularily' be encountered by users by out-of-sync mirrors serving a single run (e.g. load balancer) or in two consecutive runs on the other hand, so it would just help teaching people ignore it. That said, most of the code churn is caused by enforcing this additional requirement. Crisscross from InRelease to Release.gpg is e.g. very unlikely in practice, but if we would ignore it an attacker could sidestep it this way.
2015-05-13detect Releasefile IMS hits even if the server doesn'tDavid Kalnischkies
Not all servers we are talking to support If-Modified-Since and some are not even sending Last-Modified for us, so in an effort to detect such hits we run a hashsum check on the 'old' compared to the 'new' file, we got the hashes for the 'new' already for "free" from the methods anyway and hence just need to calculated the old ones. This allows us to detect hits even with unsupported servers, which in turn means we benefit from all the new hit behavior also here.
2015-05-12detect 416 complete file in partial by expected hashDavid Kalnischkies
If we have the expected hashes we can check with them if the file we have in partial we got a 416 for is the expected file. We detected this with same-size before, but not every server sends a good Content-Range header with a 416 response.
2015-05-11sync TFRewrite*Order arrays with dpkg and dakDavid Kalnischkies
dpkg and dak know various field names and order them in their output, while we have yet another order and have to play catch up with them as we are sitting between chairs here and neither order is ideal for us, too. A little testcase is from now on supposed to help ensureing that we do not derivate to far away from which fields dpkg knows and orders.
2015-05-11improve partial/ cleanup in abort and failure casesDavid Kalnischkies
Especially pdiff-enhanced downloads have the tendency to fail for various reasons from which we can recover and even a successful download used to leave the old unpatched index in partial/. By adding a new method responsible for making the transaction of an individual file happen we can at specialisations especially for abort cases to deal with the cleanup. This also helps in keeping the compressed indexes around if another index failed instead of keeping the decompressed files, which we wouldn't pick up in the next call.
2015-04-19a hit on Release files means the indexes will be hits tooDavid Kalnischkies
If we get a IMSHit for the Transaction-Manager (= the InRelease file or as its still supported fallback Release + Release.gpg combo) we can assume that every file we would queue based on this manager, but already have locally is current and hence would get an IMSHit, too. We therefore save us and the server the trouble and skip the queuing in this case. Beside speeding up repetative executions of 'apt-get update' this way we also avoid hitting hashsum errors if the indexes are in fact already updated, but the Release file isn't yet as it is the case on well behaving mirrors as Release files is updated last. The implementation is a bit harder than the theory makes it sound as we still have to keep reverifying the Release files (e.g. to detect now expired once to avoid an attacker being able to silently stale us) and have to handle cases in which the Release file hits, but some indexes aren't present (e.g. user added a new foreign architecture).
2015-04-19ensure lists/ files have correct permissions after apt-cdrom addDavid Kalnischkies
Its a bit unpredictable which permissons and owners we will encounter on a CD-ROM (or a USB stick, as apt-cdrom is responsible for those too), so we have to ensure in this codepath as well that everything is nicely setup without waiting for a 'apt-get update' to fix up the (potential) mess.
2015-04-19send Alt-* info for uncompressed based on any compressionsDavid Kalnischkies
file sends information about the uncompressed file if it can find it as well as for the compressed file. This was done only for gzip so far, but we support more compression types. That this information isn't used a lot is a different story. Git-Dch: Ignore
2015-04-19improve https method queue progress reportingDavid Kalnischkies
The worker expects that the methods tell him when they start or finish downloading a file. Various information pieces are passed along in this report including the (expected) filesize. https was using a "global" struct for reporting which made it 'reuse' incorrect values in some cases like a non-existent InRelease fallbacking to Release{,.gpg} resulting in a size-mismatch warning. Reducing the scope and redesigning the setting of the values we can fix this and related issues. Closes: 777565, 781509 Thanks: Robert Edmonds and Anders Kaseorg for initial patchs
2015-03-16test exitcode as well as string equalityDavid Kalnischkies
We use test{success,failure} now all over the place in the framework, so its only consequencial to do this in the situations in which we test for a specific output as well. Git-Dch: Ignore
2015-03-16merge debian/sid into debian/experimentalDavid Kalnischkies
2015-03-08rework dpkg-wrapping in test frameworkDavid Kalnischkies
We are able to run maintainer scripts if needed before, but we need to set ADMINDIR to be able to call dpkg tools like dpkg-trigger inside of them. Git-Dch: Ignore
2015-01-10128 KiB DSC files ought to be enough for everyoneDavid Kalnischkies
Your mileage may vary, but don't worry: There is more than one way to do it, but our one size fits all is not a bigger hammer, but an entire roundhouse kick! So brace yourself for the tl;dr: The limit is gone.* Beware: This fixes also the problem that a double newline is unconditionally added 'later' which is an overcommitment in case the dsc filesize is limit-2 <= x <= limit. * limited to numbers fitting into an unsigned long long. Closes: 774893
2014-12-23always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Note that dpkg currently has a workaround implemented to allow upgrades to jessie to be clean, so that the test works before and after. Also note that test (compared to the one in the bug) drops the await test as its is considered a loop by dpkg now. Closes: 769609
2014-12-23do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-22dispose http(s) 416 error page as non-contentDavid Kalnischkies
Real webservers (like apache) actually send an error page with a 416 response, but our client didn't expect it leaving the page on the socket to be parsed as response for the next request (http) or as file content (https), which isn't what we want at all… Symptom is a "Bad header line" as html usually doesn't parse that well to an http-header. This manifests itself e.g. if we have a complete file (or larger) in partial/ which isn't discarded by If-Range as the server doesn't support it (or it is just newer, think: mirror rotation). It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a, which removed the filesize - 1 trick, but this had its own problems… To properly test this our webserver gains the ability to reply with transfer-encoding: chunked as most real webservers will use it to send the dynamically generated error pages. (The tests and their binary helpers had to be slightly modified to apply, but the patch to fix the issue itself is unchanged.) Closes: 768797
2014-12-09dispose http(s) 416 error page as non-contentDavid Kalnischkies
Real webservers (like apache) actually send an error page with a 416 response, but our client didn't expect it leaving the page on the socket to be parsed as response for the next request (http) or as file content (https), which isn't what we want at all… Symptom is a "Bad header line" as html usually doesn't parse that well to an http-header. This manifests itself e.g. if we have a complete file (or larger) in partial/ which isn't discarded by If-Range as the server doesn't support it (or it is just newer, think: mirror rotation). It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a, which removed the filesize - 1 trick, but this had its own problems… To properly test this our webserver gains the ability to reply with transfer-encoding: chunked as most real webservers will use it to send the dynamically generated error pages. Closes: 768797
2014-12-07always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Closes: 769609
2014-12-07correct architecture detection for 'rc' packages for purgeDavid Kalnischkies
We were already considering these cases, but the code was flawed, so that packages changing architectures are incorrectly handled and hence the wrong architecture is used to call dpkg with, so that dpkg says the package isn't installed (which it isn't for the requested architecture). Closes: 770898
2014-11-28close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-18close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-18fix file ownership tests to work on kfreebsdDavid Kalnischkies
While on linux files are created in /tmp with $USER:$USER, on my kfreebsd testmachine they are created with $USER:root, so we pull some strings here to make it work on both.
2014-11-18create our cache and lib directory always with mode 755David Kalnischkies
We autocreate for a while now the last two directories in /var/lib/apt/lists (similar for /var/cache/apt/archives) which is very nice for systems having any of those on tmpfs or other non-persistent storage. This also means though that this creation is effected by the default umask, so for people with aggressive umasks like 027 the directories will be created with 750, which means all non-root users are left out, which is usually exactly what we want then this umask is set, but the cache and lib directories contain public knowledge. There isn't any need to protect them from viewers and they render apt completely useless if not readable.
2014-11-18various small additional tests and testcasesDavid Kalnischkies
Usually they don't provide a lot in terms of what they test, but they help in covering many lines from strictly anecdotal commands (stats, moo) and error messages, so that stuff which really needs to be tested, but isn't is better visible in coverage reports. Git-Dch: Ignore
2014-11-09disable the lock disabling in the testsDavid Kalnischkies
We create our own directories here and work without root in them, so we can also test the locking with them as it is how we usually operate. Git-Dch: Ignore
2014-11-09enhance apt-extracttemplates testDavid Kalnischkies
The tool checks for debconf version before printing the info it extracts, so that it doesn't extract data which can't be interpreted before debconf is upgraded. It is only fair to check for this behaviour in the tests. Git-Dch: Ignore
2014-11-09streamline display of --help in all toolsDavid Kalnischkies
By convention, if I run a tool with --help or --version I expect it to exit successfully with the usage, while if I do call it wrong (like without any parameters) I expect the usage message shown with a non-zero exit.
2014-10-26tests: enhance output of grep and test failsDavid Kalnischkies
Git-Dch: Ignore
2014-10-23tests: support 'installed' release in insertpackageDavid Kalnischkies
It is sometimes handy to have an installed package also in the archive, but this was until now harder than it should as you had to duplicate the lines, which is especially dangerous while writing the tests as it easily happens that these two lines divert and so the same-but-different version detection kicks in. Git-Dch: Ignore
2014-10-23switch tests to Translation-en usageDavid Kalnischkies
We can use either and some tests exercise this, but the default should be what we want to use and that is a split out long description file which is properly mentioned in the Release file. Git-Dch: Ignore
2014-10-23add test for Basic Authentication schemeDavid Kalnischkies
Git-Dch: Ignore
2014-10-23chown finished partial files earlierDavid Kalnischkies
partial files are chowned by the Item baseclass to let the methods work with them. Now, this baseclass is also responsible for chowning the files back to root instead of having various deeper levels do this. The consequence is that all overloaded Failed() methods now call the Item::Failed base as their first step. The same is done for Done(). The effect is that even in partial files usually don't belong to _apt anymore, helping sneakernets and reducing possibilities of a bad method modifying files not belonging to them. The change is supported by the framework not only supporting being run as root, but with proper permission management, too, so that privilege dropping can be tested with them.
2014-10-20test if TMPDIR is accessible before usingDavid Kalnischkies
Private temporary directories as created by e.g. libpam-tmpdir are nice, but they are also very effective in preventing our priviledge dropping to work as TMPDIR will be set to a directory only root has access to, so working with it as _apt will fail. We circumvent this by extending our check for a usable TMPDIR setting by checking access rights. Closes: 765951
2014-10-20testcases: do not allow warnings in testsuccessDavid Kalnischkies
Adds a new testwarning which tests for zero exit and the presents of a warning in the output, failing if either is not the case or if an error is found, too. This allows us to change testsuccess to accept only totally successful executions (= without warnings) which should help finding regressions. Git-Dch: Ignore
2014-10-20check for failure message in testsuccess/failureDavid Kalnischkies
These functions check the exit code of the command, but for apt commands we can go further and require an error message for non-zero exits and none for zero exits. Git-Dch: Ignore
2014-10-20check lists/ content in tests doing rollbackDavid Kalnischkies
Git-Dch: Ignore
2014-10-20autorun permission tests for all apt-get update callsDavid Kalnischkies
Adds some infrastructure to run tests automatically for certain commands. The first command being 'apt-get update' (and 'apt update') which check for correct permission and owner of the files in lists/. Git-Dch: Ignore
2014-10-20aborted reverify restores file owner and permissionDavid Kalnischkies
If we get an IMS hit for an InRelease file we use the file we already have and pass it into reverification, but this changes the permissions and on abort of the transaction they weren't switched back. This is now done, additionally, every file in partial which hasn't failed gets permission and owner changed for root access as well, as it is very well possible that the next invocation will (re)use these files.
2014-10-15testcases runable as rootDavid Kalnischkies
Running the testcases is usually not a good idea, but it can be handy to check if the privilege dropping works. Git-Dch: Ignore
2014-10-14Add new configallowinsecurerepositories to the test frameworkMichael Vogt
Add a new configallowinsecurerepositories that controls the value of Acquire::AllowInsecureRepositories for the tests. Set it to "false" for most of the testsuite and only enable it where its really needed. We want to switch the default for this post-jessie.
2014-10-13fix compile and tests errorDavid Kalnischkies
I am pretty sure I did that before committing broken stuff… Git-Dch: Ignore
2014-10-13trusted=yes sources are secure, we just don't know whyDavid Kalnischkies
Do not require a special flag to be present to update trusted=yes sources as this flag in the sources.list is obviously special enough. Note that this is just disabling the error message, the user will still be warned about all the (possible) failures the repository generated, it is just triggering the acceptance of the warnings on a source-by-source level. Similarily, the trusted=no flag doesn't require the user to pass additional flags to update, if the repository looks fine in the view of apt it will update just fine. The unauthenticated warnings will "just" be presented then the data is used. In case you wonder: Both was the behavior in previous versions, too.
2014-10-07do not show IP in output of testcasesDavid Kalnischkies
On travis-ci connect.cc detects a rotation, triggering it store the IP which is later appended to the error message, which is all nice and great if we deal with a real server, but in the testcases it just triggers failures as strings do not match. Git-Dch: Ignore
2014-10-07don't show ErrorText for Ign by defaultDavid Kalnischkies
Some distributions (or repositories) do not have as much "Ign-discipline" as I would like to, so that could be pretty distracting for our users if enabled by default. It is handy for testcases though. Git-Dch: Ignore
2014-10-07Merge remote-tracking branch 'upstream/debian/experimental' into ↵Michael Vogt
feature/acq-trans Conflicts: apt-pkg/acquire-item.cc
2014-10-07display errortext for all Err as well as Ign logsDavid Kalnischkies
consistently using Item::Failed in all specializec classes helps setting up some information bits otherwise unset, so some errors had an empty reason as an error. Ign is upgraded to display the error message we ignored to further help in understanding what happens.
2014-10-07use _apt:root only for partial directoriesDavid Kalnischkies
Using a different user for calling methods is intended to protect us from methods running amok (via remotely exploited bugs) by limiting what can be done by them. By using root:root for the final directories and just have the files in partial writeable by the methods we enhance this in sofar as a method can't modify already verified data in its parent directory anymore. As a side effect, this also clears most of the problems you could have if the final directories are shared without user-sharing or if these directories disappear as they are now again root owned and only the partial directories contain _apt owned files (usually none if apt isn't running) and the directory itself is autocreated with the right permissions.
2014-09-29Merge branch 'debian/sid' into debian/experimentalMichael Vogt
Conflicts: apt-pkg/acquire-item.cc
2014-09-27add --readonly option for apt-key advDavid Kalnischkies
Some advanced commands can be executed without the keyring being modified like --verify, so this adds an option to disable the mergeback and uses it for our gpg calling code. Git-Dch: Ignore
2014-09-27add --secret-keyring option for apt-keyDavid Kalnischkies
For some advanced usecases it might be handy to specify the secret keyring to be used (e.g. as it is used in the testcases), but specifying it via a normal option for gnupg might not be available forever: http://lists.gnupg.org/pipermail/gnupg-users/2013-August/047180.html Git-Dch: Ignore