summaryrefslogtreecommitdiff
path: root/test/integration/test-apt-acquire-additional-files
AgeCommit message (Collapse)Author
2016-01-12test-apt-acquire-additional-files: Set file mode of touched filesJulian Andres Klode
This prevents a test suite failure on systems with weird umasks. Also set umask 000 at the beginning so we can actually check for that anywhere. Gbp-Dch: ignore
2016-01-08keep compressed indexes in a low-cost formatDavid Kalnischkies
Downloading and storing are two different operations were different compression types can be preferred. For downloading we provide the choice via Acquire::CompressionTypes::Order as there is a choice to be made between download size and speed – and limited by whats available in the repository. Storage on the other hand has all compressions currently supported by apt available and to reduce runtime of tools accessing these files the compression type should be a low-cost format in terms of decompression. apt traditionally stores its indexes uncompressed on disk, but has options to keep them compressed. Now that apt downloads additional files we also deal with files which simply can't be stored uncompressed as they are just too big (like Contents for apt-file). Traditionally they are downloaded in a low-cost format (gz) as repositories do not provide other formats, but there might be even lower-cost formats and for download we could introduce higher-cost in the repositories. Downloading an entire index potentially requires recompression to another format, so an update takes potentially longer – but big files are usually updated via pdiffs which has to de- and re-compress anyhow and does it on the fly anyhow, so there is no extra time needed and in general it seems to be benefitial to invest the time in update to save time later on file access.
2016-01-08allow pdiff bootstrap from all supported compressorsDavid Kalnischkies
There is no reason to enforce that the file we start the bootstrap with is compressed with a compressor which is available online. This allows us to change the on-disk format as well as deals with repositories adding/removing support for a specific compressor.
2015-12-19tests: support spaces in path and TMPDIRDavid Kalnischkies
This doesn't allow all tests to run cleanly, but it at least allows to write tests which could run successfully in such environments. Git-Dch: Ignore
2015-11-04ensure FileFd doesn't try to open /dev/null as atomic and coDavid Kalnischkies
The wrapping will fail in the best case and actually end up deleting /dev/null in the worst case. Given that there is no point in trying to write atomically to /dev/null as you can't read from it again just ignore these flags if higher level code ends up trying to use them on /dev/null. Git-Dch: Ignore
2015-11-04support arch:all data e.g. in separate Packages fileDavid Kalnischkies
Based on a discussion with Niels Thykier who asked for Contents-all this implements apt trying for all architecture dependent files to get a file for the architecture all, which is treated internally now as an official architecture which is always around (like native). This way arch:all data can be shared instead of duplicated for each architecture requiring the user to download the same information again and again. There is one problem however: In Debian there is already a binary-all/ Packages file, but the binary-any files still include arch:all packages, so that downloading this file now would be a waste of time, bandwidth and diskspace. We therefore need a way to decide if it makes sense to download the all file for Packages in Debian or not. The obvious answer would be a special flag in the Release file indicating this, which would need to default to 'no' and every reasonable repository would override it to 'yes' in a few years time, but the flag would be there "forever". Looking closer at a Release file we see the field "Architectures", which doesn't include 'all' at the moment. With the idea outlined above that 'all' is a "proper" architecture now, we interpret this field as being authoritative in declaring which architectures are supported by this repository. If it says 'all', apt will try to get all, if not it will be skipped. This gives us another interesting feature: If I configure a source to download armel and mips, but it declares it supports only armel apt will now print a notice saying as much. Previously this was a very cryptic failure. If on the other hand the repository supports mips, too, but for some reason doesn't ship mips packages at the moment, this 'missing' file is silently ignored (= that is the same as the repository including an empty file). The Architectures field isn't mandatory through, so if it isn't there, we assume that every architecture is supported by this repository, which skips the arch:all if not listed in the release file.
2015-09-15tests: don't use hardcoded port for http and httpsDavid Kalnischkies
This allows running tests in parallel. Git-Dch: Ignore
2015-08-29try xz instead of bz2 first for compressed filesDavid Kalnischkies
xz has pretty much won "the compressor war" and e.g. the Debian archive doesn't even distribute bz2 anymore in favor of 'xz' and 'gz', so by changing the default order we have a more realistic --print-uris behavior as it will always show the first compressor. In practice this effects repositories without a Release file (very bad, we don't want to support them anymore anyhow) as xz will be tried before bz2 now [which is probably not available, but so might be bz2…] AND repositories which provide both, bz2 and xz (which isn't too common) in sofar as apt will now download xz instead of bz2. Users with special needs can stick with bz2 as first compressor tried with Acquire::CompressionTypes::Order:: "bz2"; (see man apt.conf) – but users with special needs usually prefer "gz" anyhow, so the realworld change is expected to be very low.
2015-08-10rename 'apt-get files' to 'apt-get indextargets'David Kalnischkies
'files' is a bit too generic as a name for a command usually only used programmatically (if at all) by developers, so instead of "wasting" this generic name for this we use "indextargets" which is actually the name of the datastructure the displayed data is stored in. Along with this rename the config options are renamed accordingly.
2015-08-10allow individual targets to be kept compressedDavid Kalnischkies
There is an option to keep all targets (Packages, Sources, …) compressed for a while now, but the all-or-nothing approach is a bit limited for our purposes with additional targets as some of them are very big (Contents) and rarely used in comparison, so keeping them compressed by default can make sense, while others are still unpacked. Most interesting is the copy-change maybe: Copy is used by the acquire system as an uncompressor and it is hence expected that it returns the hashes for the "output", not the input. Now, in the case of keeping a file compressed, the output is never written to disk, but generated in memory and we should still validated it, so for compressed files copy is expected to return the hashes of the uncompressed file. We used to use the config option to enable on-the-fly decompress in the method, but in reality copy is never used in a way where it shouldn't decompress a compressed file to get its hashes, so we can save us the trouble of sending this information to the method and just do it always.
2015-06-15show item ID in Hit, Ign and Err lines as wellDavid Kalnischkies
Again, consistency is the main sellingpoint here, but this way it is now also easier to explain that some files move through different stages and lines are printed for them hence multiple times: That is a bit hard to believe if the number is changing all the time, but now that it keeps consistent.
2015-06-15implement default apt-get file --release-info modeDavid Kalnischkies
Selecting targets based on the Release they belong to isn't to unrealistic. In fact, it is assumed to be the most used case so it is made the default especially as this allows to bundle another thing we have to be careful with: Filenames and only showing targets we have acquired. Closes: 752702
2015-06-11implement 'apt-get files' to access index targetsDavid Kalnischkies
Downloading additional files is only half the job. We still need a way to allow external tools to know where the files are they requested for download given that we don't want them to choose their own location. 'apt-get files' is our answer to this showing by default in a deb822 format information about each IndexTarget with the potential to filter the records based on lines and an option to change the output format. The command serves also as an example on how to get to this information via libapt.
2015-06-10store all targets data in IndexTarget structDavid Kalnischkies
We still need an API for the targets, so slowly prepare the IndexTargets to let them take this job. Git-Dch: Ignore
2015-06-10abstract the code to iterate over all targets a bitDavid Kalnischkies
We have two places in the code which need to iterate over targets and do certain things with it. The first one is actually creating these targets for download and the second instance pepares certain targets for reading. Git-Dch: Ignore
2015-06-09configureable acquire targets to download additional filesDavid Kalnischkies
First pass at making the acquire system capable of downloading files based on configuration rather than hardcoded entries. It is now possible to instruct 'deb' and 'deb-src' sources.list lines to download more than just Packages/Translation-* and Sources files. Details on how to do that can be found in the included documentation file.